The Irwin HSS Pro Drill Bit manufactured from high quality HSS steel. They have precision ground cutting edges for fast drilling and perfect finishing, a ground flute for maximum accuracy and fast chip removal and a universal 118º point shape for drilling a wide selection of materials.The Irwin IRW10502261 HSS Pro Drillbits comes in a bulk pack of 10. Specifications:Drillbit diameter: 3.0mmTotal length: 61mmWorking Length: 33mm
The Irwin Glass & Tile Drill Bits are suitable for drilling glass, porcelain and ceramics. Drill with low RPM (300RPM recommended), water cooling is also recommended. Do not use on hammer setting.Size 6mm
The Irwin Cordless Multi-Purpose Drill Bits have been designed for cordless, low speed multi-purpose drilling. They offer around 10% extra battery life per charge. They have a four-facet ground carbide tip for lower drilling pressure and better centring and allow for combined drilling into wood and brickwork: the Cordless Drillbit is excellent for such drilling jobs - where you drill through wood into brickwork. Only one drillbit is needed to do the job and will drill a wide selection of different materials like:BrickworkCeramic TilesBreeze BlockWoodDry WallGypsum BoardLimestoneSlateMarbleEternitePlastics/Reinforced plastics.Length: 120mm Diameter: 8mm Flute Length: 63mm
The Irwin Cordless Multi-Purpose Drill Bits have been designed for cordless, low speed multi-purpose drilling. They offer around 10% extra battery life per charge. They have a four-facet ground carbide tip for lower drilling pressure and better centring and allow for combined drilling into wood and brickwork: the Cordless Drillbit is excellent for such drilling jobs - where you drill through wood into brickwork. Only one drillbit is needed to do the job and will drill a wide selection of different materials like:BrickworkCeramic TilesBreeze BlockWoodDry WallGypsum BoardLimestoneSlateMarbleEternitePlastics/Reinforced plastics.Length: 110mm Diameter: 7mm Flute Length: 59mm
The Irwin Cordless Multi-Purpose Drill Bits have been designed for cordless, low speed multi-purpose drilling. They offer around 10% extra battery life per charge. They have a four-facet ground carbide tip for lower drilling pressure and better centring and allow for combined drilling into wood and brickwork: the Cordless Drillbit is excellent for such drilling jobs - where you drill through wood into brickwork. Only one drillbit is needed to do the job and will drill a wide selection of different materials like:BrickworkCeramic TilesBreeze BlockWoodDry WallGypsum BoardLimestoneSlateMarbleEternitePlastics/Reinforced plastics.Length: 100mm Diameter: 6.0mm Flute Length: 54mm
Irwin 6X Blue Groove Stubby Wood Bits are ideal for drilling wood and offer 6x faster drilling penetration than a standard flat bit. Their 'Tri-Flute' design allows for faster chip ejection and their full screw tips ensure ease of use and pull through. The cutting spurs produce clean holes with minimal break out and the tapered flute reduces binding. The drill bits are also heat treated for extra durability. Stubby drill bits are 10cm (4in) long, making them ideal for drilling through joists or in enclosed areas. Suitable for holes up to 5cm (2in) deep.3 Piece Stubby 6X Blue Groove Wood Bit Set is supplied with the following sizes: 16, 20 & 25mm
The Irwin Blue Groove 4X Flat Bits have a patented groove point, and cutting edge designed to cut and not scrape the timber 4 times faster than standard flat bits. The parabolic scoop optimises control and removal of wood chips. Increased relief angle from 12° to 17°. The shank is 152mm in length and 10% larger in diameter for added durability.The Irwin IRW10502815 Blue Groove 4x flat bit has the following specific dimension:Diameter: 24mm
The IRWIN bi-metal holesaws have been designed for the professional, and made to provide long lasting performance for use in general construction, electrical installation, plumbing, heating and ventilation, and remodelling applications. The sharp, variable tooth (4-6 pitch) design provides a faster cutting action and enhanced performance in a variety of materials and cutting applications. The bi-metal construction and the electron beam welded teeth give the user a stronger, longer lasting blade. The IRWIN holesaw range is available from sizes 14 mm (9/16 Inch) to 152 mm (6 Inch), with a line up of high quality arbors and a pilot drill to cover all application requirements. Cuts a variety of materials including: aluminium, copper, iron, stainless steel, wood and zinc.Size: 76 mm dia
The IRWIN bi-metal holesaws have been designed for the professional, and made to provide long lasting performance for use in general construction, electrical installation, plumbing, heating and ventilation, and remodelling applications. The sharp, variable tooth (4-6 pitch) design provides a faster cutting action and enhanced performance in a variety of materials and cutting applications. The bi-metal construction and the electron beam welded teeth give the user a stronger, longer lasting blade. The IRWIN holesaw range is available from sizes 14 mm (9/16 Inch) to 152 mm (6 Inch), with a line up of high quality arbors and a pilot drill to cover all application requirements. Cuts a variety of materials including: aluminium, copper, iron, stainless steel, wood and zinc.Size: 102 mm dia
The Starrett A5 extension will accomodate A2, A17-12 and XA2 arbors. A15 fits A1, A10 and A17-38 arbors.Starrett A15 12in Extension Bar suitable for use with A1, A10 Arbors, A17-38, XA1 and XA10.
Dormer A100 Metric HSS jobber drills are suitable for use in the majority of general purpose engineering applications. They have good self-centring capability on a wide range of materials and are suitable for both hand and machine use. DIN338RNBS328ISO235Tip diameter: 10.00mm.Working length: 87mm.Overall length: 133mm.
The Starrett Deep Cut Bi-Metal Holesaws combine the tried and tested tooth form used on the previous Dual Pitch Holesaw, with a new tooth material for enhanced heat and wear resistance. The Deep Cut saw also features an increased hole saw depth of 51mm (2in), and is ideal for cutting metal of more than 3mm thickness, tubes with a wall thickness of greater than 3mm and wood up to 51mm (2in) thick. Cutting Depth: 51mm.Starrett DCH0338 Deep Cut Bi Metal Holesaw has the following specification: Diameter: 86mm (3.3/8in).
The Bahco 9631 Long Series Flat Bit is longer than a standard flat bit, useful for reaching awkward spots or for drilling accurate, deep holes into wood. It has a positive cutting angle which drills holes twice as fast and lasts three times longer than a conventional bit. Made from high-carbon steel and heat-treated all over. The hardened blade is forged directly from the round shaft. The winged shoulders enable the bit to first cut the wood and then remove the material from the centre section, ensuring a smooth finish and superior swarf clearance.1 x Bahco 9631-32-400 Long Flat Bit 32mm
The Bahco 9631 Long Series Flat Bit is longer than a standard flat bit, useful for reaching awkward spots or for drilling accurate, deep holes into wood. It has a positive cutting angle which drills holes twice as fast and lasts three times longer than a conventional bit. Made from high-carbon steel and heat-treated all over. The hardened blade is forged directly from the round shaft. The winged shoulders enable the bit to first cut the wood and then remove the material from the centre section, ensuring a smooth finish and superior swarf clearance.1 x Bahco 9631-20-400 Long Flat Bit 20mm
Bahco Sandflex® holesaws are made for high precision cutting of holes from 14 mm to 152 mm diameter in all sawable materials up to 38 mm thick. Suitable for use in portable electric or pneumatic tools, and in a wide variety of drilling, boring, milling and other machine tools. All saws have varipitch (4-6tpi) blades.Cutting edges are in high speed steel for extra hardness, with welded seams for accuracy of cut, and heat-treated bodies for maximum strength.Size: 19 mm. Arbors to suit (available separately). Code Holesaw Size ShankBAH3834930 930 14-30 mm 3/8 Inch (8.5mm).BAH38341130 1130 14-30 mm 7/16 Inch (11.1mm).BAH38349100 9100 32-100 mm 3/8 Inch (8.5mm).BAH383411152 11152 32-210 mm 1/2 Inch (11.1mm).BAH383411152C 11152 32-210 mm 1/2 Inch (11.1mm).BAH383416152 16152 32-210 mm 5/8 Inch (15.4mm).
Bahco Sandflex® holesaws are made for high precision cutting of holes from 14 mm to 152 mm diameter in all sawable materials up to 38 mm thick. Suitable for use in portable electric or pneumatic tools, and in a wide variety of drilling, boring, milling and other machine tools. All saws have varipitch (4-6tpi) blades.Cutting edges are in high speed steel for extra hardness, with welded seams for accuracy of cut, and heat-treated bodies for maximum strength.Size: 140 mm. Arbors to suit (available separately). Code Holesaw Size ShankBAH3834930 930 14-30 mm 3/8 Inch (8.5mm).BAH38341130 1130 14-30 mm 7/16 Inch (11.1mm).BAH38349100 9100 32-100 mm 3/8 Inch (8.5mm).BAH383411152 11152 32-210 mm 1/2 Inch (11.1mm).BAH383411152C 11152 32-210 mm 1/2 Inch (11.1mm).BAH383416152 16152 32-210 mm 5/8 Inch (15.4mm).
A777 Metric Cobalt Jobber Drill Bits have a heavy-duty, 135° split point for use when greater heat is generated during drilling, e.g on higher tensile tougher materials and in particular the Aerospace Industry. Specification Flute Geometry: Standard Helix, Right hand spiral, Thick WebPoint Angle: 0.30 mm - 0.95 mm 118° Conical point1.00 mm to 1.40 mm inclusive 135° 4 facet point1.50 mm and above 135° split point sizes (Split point geometry to NAS 907 Areospace Specification type P3 Point) Surface Treatment: BronzeMaterial: HSCo Cobalt steel DIN 338 RN / BS328 / ISO 235Tip diameter: 5.0mmWorking length: 52mm.Overall length: 86mm.
Dormer A125 HSS Extra Length Drill is a general purpose extra length drill that is ideal for long reach and deep hole applications and capable of drilling up to 10 times its diameter.
Dormer A125 HSS Extra Length Drills with a standard helix and extra length bit. The straight shank enables the bit to be held securely in the majority of three or four jaw chucks. Used for general-purpose deep hole drilling. Tip diameter: 1/8in. Working length: 150mm.Overall length: 200mm.
Dormer A110 Imperial Long Series Drill Bits is a general purpose long reach drill. Ideal for drilling deep holes in a wide range of materials and are suitable for both hand and machine use. Manufactured to DIN 340RN/BS328/ISO 494 standards.Tip diameter: 3/16in. Working length: 87mm.Overall length: 132mm.
Dormer A100 Metric HSS jobber drills are suitable for use in the majority of general purpose engineering applications. They have good self-centring capability on a wide range of materials and are suitable for both hand and machine use. DIN338RNBS328ISO235Tip diameter: 4.70mm.Working length: 47mm.Overall length: 80mm.
The Dormer A002 Metric HSS-TiN Coated Jobber Drill Bits in Pouch Packs. Each bit has a pointed web and fluted tip design. The point design allows for efficient cutting, with a reduced axial force and allows for accurate centring. The web design provides optimised strength, rigidity and improves the feed of the drilling bit. The flutes allows for efficient chip form and evacuation. The bits have visible, tool in-situ marking that allows for easy identification. The optimised helix angle provides greater stiffness across the diameter range. The bright body improves cutting performance on ductile materials, and the Titanium Nitride coating resists flank and crater wear, and has low friction that allows for increased cutting speeds. Dormer A002 HSS-TiN Coated Jobber Drill 8.50mm. Pouch of 1. Tip Diameter: 8.50mm.Working Length: 75mm.Overall Length: 117mm.
Dormer Metric A002 TiN Jobber Drill Bits have a TiN tip coating for increased tool life and performance. It has a self-centring split point for superb hole quality and positional accuracy. It will drill steel, stainless, cast iron, ceramics, plastics and many other materials with ease. Made to DIN 338RN/BS328/ISO 235 standards. PLEASE NOTE ALL sizes under 2.0mm are NOT TiN Coated.Tip diameter: 4.10mm.Working length: 43mm.Overall length: 75mm.
The DEWALT Flat Wood Drill Bit is made from high quality chrome vanadium steel with a ground central point and cutting edges for accurate location and clean cutting. They also have a ground chip breaker to reduce splintering providing relatively clean holes and improved drilling efficiency. Ideal for rapid drilling of holes in wood. Suitable for natural hard and soft wood, chipboard and other man made materials.1 x DEWALT Flat Wood Drill Bit 10 x 160mm
