The DEWALT DCF900 XR High Torque Impact Wrench has an efficient brushless motor delivers high performance, extends tool life and allows for much shorter design. Its variable trigger provides complete control over all applications.The compact design enables easy access in confined areas. Fitted with a comfortable rubber XR grip and switch for greater application comfort and maximum control. An ultra-bright white LED work light with a delay feature improves visibility. Brightness control allows dimming or turn off to suit the working conditions. Specifications: Bit Holder: 1/2in Square Drive.No Load Speed: 0-2,300/min.Impact Rate: 18,000/bpm.Max. Torque: 1,396Nm, Breakaway Torque: 1,898Nm.Weight: 2.8kg (without battery).The DEWALT DCF900P2T XR Brushless 1/2in High Torque Impact Wrench is supplied with: 2 x 18V 5.0Ah Li-ion Batteries1 x Multi-Voltage Charger1 x TSTAK Kitbox
The DEWALT DCF900 XR High Torque Impact Wrench has an efficient brushless motor delivers high performance, extends tool life and allows for much shorter design. Its variable trigger provides complete control over all applications.The compact design enables easy access in confined areas. Fitted with a comfortable rubber XR grip and switch for greater application comfort and maximum control. An ultra-bright white LED work light with a delay feature improves visibility. Brightness control allows dimming or turn off to suit the working conditions. Specifications: Bit Holder: 1/2in Square Drive.No Load Speed: 0-2,300/min.Impact Rate: 18,000/bpm.Max. Torque: 1,396Nm, Breakaway Torque: 1,898Nm.Weight: 2.8kg (without battery).The DEWALT DCF900N XR Brushless 1/2in High Torque Impact Wrench comes as a bare unit, NO battery or charger supplied.
The DEWALT DCF892 XR Impact Wrench has an efficient brushless motor and 1/2in square drive plus detent pin allowing for quick socket changes. Its variable speed trigger provides complete control over all applications and tactile 4-mode select feature, a selection of different modes and speed settings for ultimate performance. * Mode 1 Low Speed: tool operates at a reduced speed and outputs approximately 160Nm, reverse tool operates at normal speed.* Mode 2 Mid Speed: tool operates at a reduced speed and outputs approximately 400Nm, reverse tool operates at normal speed.* Mode 3 High Speed: tool operates at normal speed, reverse tool operates at normal speed.* Mode 4 Precision Wrench: tool pauses before impacting to help prevent over-tightening, reverse tool lowers speed when fastening is loose to help prevent run-off. Its ultra-compact design enables easy access in confined areas. Fitted with a comfortable rubber XR grip and switch for greater application comfort and maximum control. An ultra-bright white LED work light with a delay feature improves visibility. Brightness control allows dimming or turn off to suit the working conditions. Specification: Bit Holder: 1/2in Detent PinNo Load Speed: 0-2,000/min.Impact Rate: 0-3,250/bpmMax. Torque: 812NmBreakaway Torque: 1152NmWeight: 1.6kg (without battery)The DEWALT DCF892P2T XR Brushless High Torque 1/2in Impact Wrench is supplied with: 2 x 18V 5.0Ah Li-ion Batteries1 x Charger1 x TSTAK Kitbox
The DEWALT DCF892 XR Impact Wrench has an efficient brushless motor and 1/2in square drive plus detent pin allowing for quick socket changes. Its variable speed trigger provides complete control over all applications and tactile 4-mode select feature, a selection of different modes and speed settings for ultimate performance. * Mode 1 Low Speed: tool operates at a reduced speed and outputs approximately 160Nm, reverse tool operates at normal speed.* Mode 2 Mid Speed: tool operates at a reduced speed and outputs approximately 400Nm, reverse tool operates at normal speed.* Mode 3 High Speed: tool operates at normal speed, reverse tool operates at normal speed.* Mode 4 Precision Wrench: tool pauses before impacting to help prevent over-tightening, reverse tool lowers speed when fastening is loose to help prevent run-off. Its ultra-compact design enables easy access in confined areas. Fitted with a comfortable rubber XR grip and switch for greater application comfort and maximum control. An ultra-bright white LED work light with a delay feature improves visibility. Brightness control allows dimming or turn off to suit the working conditions. Specification: Bit Holder: 1/2in Detent PinNo Load Speed: 0-2,000/min.Impact Rate: 0-3,250/bpmMax. Torque: 812NmBreakaway Torque: 1152NmWeight: 1.6kg (without battery)The DEWALT DCF892N XR Brushless High Torque 1/2in Impact Wrench is supplied as a Bare Unit - No Battery or Charger.
The DEWALT DCF891 XR 1/2in Hog Ring Anvil Impact Wrench was designed to comfortably handle various fastening projects. Choose between 4 modes to allow for reliable high-level performance, operability, and versatility. The compact ergonomic design offers easy maneuverability without sacrificing power. Fitted with an LED work light for visibility in dimly lit spaces. Specifications: Bit Holder: 1/2in Hog Ring Anvil.No Load Speed: 0-2,000/min.Impact Rate: 0-3,250/bpm.Max. Torque: 812Nm.Max. Bolt Diameter: M4.The DEWALT DCF891N XR Brushless 1/2in Hog Ring Anvil Impact Wrench is supplied as a Bare Unit - No Battery or Charger.
The DEWALT DCF891 XR 1/2in Hog Ring Anvil Impact Wrench was designed to comfortably handle various fastening projects. Choose between 4 modes to allow for reliable high-level performance, operability, and versatility. The compact ergonomic design offers easy maneuverability without sacrificing power. Fitted with an LED work light for visibility in dimly lit spaces. Specifications: Bit Holder: 1/2in Hog Ring Anvil.No Load Speed: 0-2,000/min.Impact Rate: 0-3,250/bpm.Max. Torque: 812Nm.Max. Bolt Diameter: M4.The DEWALT DCF891H2T XR BL 1/2in HR Anvil Impact Wrench was designed to comfortably handle various fastening projects. Choose between 4 modes to allow for reliable high-level performance, operability, and versatility.The compact ergonomic design offers easy maneuverability without sacrificing power. Fitted with an LED work light for visibility in dimly lit spaces. It is supplied with:2 x 18V POWERSTACK Li-ion Batteries 5.0Ah.1 x DCB1104 Charger.1 x TSTAK Heavy-duty Kitbox. Specifications: Bit Holder: 1/2in Hog Ring Anvil.No Load Speed: 0-2,000/min.Impact Rate: 0-3,250/bpm.Max. Torque: 812Nm.Max. Bolt Diameter: M4.
The DEWALT DCF512 XR 1/2in Open Head Ratchet has a brushless motor that delivers up to 95Nm Torque, ideal for use with a wide variety of fastener sizes and applications. It has a variable speed trigger that helps you alter output based on the application. The narrow motor design ensures easier access into tight spaces. Ergonomic soft grips increase comfort and reduce fatique. Its glass-filled nylon housing provides added strength and protects from oils and solvents. There is also a bright LED work light, ideal when working in dark spaces. Specification: No Load Speed: 250/min.Max. Fastening Torque: 95NmLength: 388mmThe DEWALT DCF512N XR 1/2in Open Head Ratchet comes as a Bare Unit, NO battery or charger supplied.
The DEWALT DCF512 XR 1/2in Open Head Ratchet has a brushless motor that delivers up to 95Nm Torque, ideal for use with a wide variety of fastener sizes and applications. It has a variable speed trigger that helps you alter output based on the application. The narrow motor design ensures easier access into tight spaces. Ergonomic soft grips increase comfort and reduce fatique. Its glass-filled nylon housing provides added strength and protects from oils and solvents. There is also a bright LED work light, ideal when working in dark spaces. Specification: No Load Speed: 250/min.Max. Fastening Torque: 95NmLength: 388mmThe DEWALT DCF512D1 XR 1/2in Open Head Ratchet is supplied with: 1 x 18V 2.0Ah Li-ion Battery1 x DCB112 Charger1 x Soft Tool Bag
The DEWALT DCE825NG18 Spot & Cross Green Laser is compatible with 12V and 18V XR Slide Type Li-ion Batteries that provide extra-long run time and the convenience of rechargeable power tool batteries. A green beam laser diode provides full brightness for visibility and extended working range. It has a variable blink sequence for manual mode and a full-time pulse mode allows use with a detector. Fitted with a locking pendulum that helps to prevent damage to internal components. Supplied with: 1 x Laser Target, 1 x Wall Mount Bracket and 1 x TSTAK Compatible Box. Supplied as a Bare Unit - No Battery or Charger. Specification: Accuracy: ± 3mm @10mWorking Range: 30m (50m with detector)Thread: 1/4in and 5/8inLaser Class: 2
The DEWALT DCF504 XR 1/4in Open Head Ratchet has a brushless motor that delivers up to 95Nm Torque, ideal for use with a wide variety of fastener sizes and applications. It has a variable speed trigger that helps you alter output based on the application. The narrow motor design ensures easier access into tight spaces. Ergonomic soft grips increase comfort and reduce fatique. Its glass-filled nylon housing provides added strength and protects from oils and solvents. There is also a bright LED work light, ideal when working in dark spaces. Specification: No Load Speed: 250/min.Max. Fastening Torque: 95NmLength: 345mmThe DEWALT DCF504N XR 1/4in Open Head Ratchet comes as a Bare Unit, NO battery or charger supplied.
The DEWALT DCF504 XR 1/4in Open Head Ratchet has a brushless motor that delivers up to 95Nm Torque, ideal for use with a wide variety of fastener sizes and applications. It has a variable speed trigger that helps you alter output based on the application. The narrow motor design ensures easier access into tight spaces. Ergonomic soft grips increase comfort and reduce fatique. Its glass-filled nylon housing provides added strength and protects from oils and solvents. There is also a bright LED work light, ideal when working in dark spaces. Specification: No Load Speed: 250/min.Max. Fastening Torque: 95NmLength: 345mmThe DEWALT DCF504D1 XR 1/4in Open Head Ratchet is supplied: 1 x 12V 2.0Ah Li-ion Battery1 x DCB112 Charger1 x Soft Tool Bag
The DEWALT DCD805 XR Brushless G3 Combi has been engineered to give the greatest performance on the toughest jobsites, the 2 speed and 15 torque settings give the ultimate control over drilling and fastening applications. Its ultra-compact, lightweight design allows use in confined spaces, and fitted with an ergonomic, overmould rubber grip improving the user's comfort. The enhanced pivoting LED positioned on the foot offers greater visibility in dark, and confined spaces. POWERSTACK batteries deliver 50% more power* with a 25% smaller** footprint and work with all DEWALT 18V XR tools. * Regarding 50% more power: vs DCB183 battery, not in application.** Regarding 25% smaller pack and a more compact footprint: vs DCB183 battery. Specification: Chuck: 13mm.No Load Speed: 0-650/2,000/min.Impact Rate: 34,000/bpm.Max. Torque: 90Nm.Capacity: Steel 13mm, Masonry 13mm, Wood 55mm.The DEWALT DCD805H2T XR BL G3 Combi is supplied with: 2 x 18V 5.0Ah POWERSTACK Li-ion Batteries1 x POWERSTACK Compact Charger1 x TSTAK Carry Case
The DEWALT DCF503 XR 3/8in Open Head Ratchet has a brushless motor that delivers up to 81Nm Torque, ideal for use with a wide variety of fastener sizes and applications. It has a variable speed trigger that helps you alter output based on the application. The narrow motor design ensures easier access into tight spaces. Ergonomic soft grips increase comfort and reduce fatique. Its glass-filled nylon housing provides added strength and protects from oils and solvents. There is also a bright LED work light, ideal when working in dark spaces. Specification: No Load Speed: 250/min.Max. Fastening Torque: 81NmLength: 345mmThis DEWALT DCF503N XR 3/8in Open Head Ratchet comes as a Bare Unit, NO battery or charger supplied.
The DEWALT DCD805 XR Brushless G3 Combi has been engineered to give the greatest performance on the toughest jobsites, the 2 speed and 15 torque settings give the ultimate control over drilling and fastening applications. Its ultra-compact, lightweight design allows use in confined spaces, and fitted with an ergonomic, overmould rubber grip improving the user's comfort. The enhanced pivoting LED positioned on the foot offers greater visibility in dark, and confined spaces. POWERSTACK batteries deliver 50% more power* with a 25% smaller** footprint and work with all DEWALT 18V XR tools. * Regarding 50% more power: vs DCB183 battery, not in application.** Regarding 25% smaller pack and a more compact footprint: vs DCB183 battery. Specification: Chuck: 13mm.No Load Speed: 0-650/2,000/min.Impact Rate: 34,000/bpm.Max. Torque: 90Nm.Capacity: Steel 13mm, Masonry 13mm, Wood 55mm.The DEWALT DCD805E2T XR Brushless G3 Combi is supplied with: 2 x 18V 2.0Ah POWERSTACK Li-ion Batteries1 x POWERSTACK Compact Charger1 x TSTAK Carry Case
DEWALT DCD1623 XR Brushless Magnetic Drill with 2 speed mechanical transmission and 5 electronic variable speeds for optimal drilling speed with both small and large diameter bits. Its brushless motor provides corded drill performance and forward/reverse options make it convenient for tapping. The drill is fitted with a permanent magnet, with 9,9 KN of holding force to prevent accidental magnet deactivation. Lift-off detection detects excess rotation and automatically cuts power for increased user protection. There is also an on board LED light to illuminate the work surface. Comes as a Bare Unit, NO battery or charger supplied. Specification: No Load Speed: 130-810/min.Magnetic Adhesion: 9.9KNMax Capacity: Diameter: 50mm, Depth: 50mmHeight: 345.4mmWeight (with Battery): 14.3kg
The DEWALT DCF503 XR 3/8in Open Head Ratchet has a brushless motor that delivers up to 81Nm Torque, ideal for use with a wide variety of fastener sizes and applications. It has a variable speed trigger that helps you alter output based on the application. The narrow motor design ensures easier access into tight spaces. Ergonomic soft grips increase comfort and reduce fatique. Its glass-filled nylon housing provides added strength and protects from oils and solvents. There is also a bright LED work light, ideal when working in dark spaces. Specification: No Load Speed: 250/min.Max. Fastening Torque: 81NmLength: 345mmThe DEWALT DCF503D1 XR 3/8in Open Head Ratchet is supplied with: 1 x 12V 2.0Ah Li-ion Battery1 x DCB112 Charger1 x Soft Tool Bag
The DEWALT XR FlexVolt Slide Li-ion Battery stands at the forefront of cordless technology. The world’s first convertible 18/54V battery, offering unprecedented levels of power. Provides the unique ability to power heavy-duty construction power tools whilst still being compatible with existing DEWALT XR 18V products and offering increased run time. It offers users increased run time, over any of the 18V XR 4.0Ah or 5.0Ah Li-ion batteries.1 x DEWALT DCB549 XR FlexVolt Slide Battery 18/54V 15.0/5.0Ah.
The DEWALT DCE581N XR Caulk Gun has a variable speed dial and variable speed trigger for precise control of material flow. Its durable plunger rod has an auto-retract, anti-drip feature. The contoured grip has a rubber overmould that enables comfortable use and handling. There is also an LED light for improved visibility of application. Supplied as a Bare Unit - No Battery or Charger. Specification: Carrier Size: 300-600mlPush Speed: 584 mm/min.Push Force: 2,500N (254kg)Weight: 2.2kg
The DEWALT DCE555 XR Drywall Cut Out Tool has a brushless motor enabling fast and clean cutting on a variety of wall paneling. It’s forward-positioned on-off button enables easy actuation. Tool-free bit change enables fast bit change without the need for a wrench.Comes as a Bare Unit, NO battery or charger supplied. Supplied with: 1 x Drywall Cutting Bit, 1 x General Purpose Bit, 1 x 6.4mm (1/8in) Collet, 1 x 3.2mm (1/4in) Collet and 1 x Adjustable Depth Stop. Specifications: Collect Size: 1/4in, 1/8in.No Load Speed: 26,000/min.Weight: 1.1kg (without battery).
The DEWALT DCD999 XR XRP Combi Drill has been engineered for speed and durability. A variable speed trigger provides total control over all applications. It also features an electronic clutch with 11 position adjustable torque control for optimised precision when screw driving. The all metal chuck priovides improved grip on drilling and screwdriving accessories.FlexVolt ADVANTAGE technology. This unique electronic module features pack identification technology. This enables the tool to recognise when an XR FLEXVOLT battery is attached and then unlocks even more power.A foot LED with delay feature, provides improved visibility and flashlight functionality. Specifications: Chuck Capacity: 1.5-13mm.No Load Speed: 0-500/1,500/2,250/min.Impact Rate: 38,250/bpm.Max. Torque: 67Nm.Max. Drilling Capacity: Metal 15mm, Wood 55mm, Masonry 13mm.Weight: 1.6kg (without battery).The DEWALT DCD999H2T XR XRP Combi Drill is supplied with: 2 x 18V POWERSTACK Li-ion Batteries 5.0Ah1 x DCB1104 Charger1 x Magnetic Bit Holder1 x Side Handle1 x Belt Hook1 x TSTAK Heavy-duty Kitbox
The DEWALT DCB116 XR FlexVolt Fast Charger can charge 12V XR, 18V XR and 54V XR FlexVolt batteries. A latching mechanism holds the battery in place securely for safety and ease when charging. Its improved state of charge indicator gives the user full control and understanding of the charge in hand. The charger can be wall mounted, ideal for use in workshops as it saves worktop space and doesn't need storing away after every use.
The DEWALT D36000 Wet Tile Saw has a lightweight design, making it easy for one person to transport and set up. A plunge feature enables quick and easy cuts, with an integrated 45 degree/22.5 degree feature for quick angle cuts. There is also an edge guide with two positions (90 degree and 45 degree) for quick corner cuts. Its stainless steel rail system is integrated into the tile saw frame, ensuring accurate cuts. In order to minimise over-spray and mist, the dual water nozzles can be adjusted for optimal water placement on the blade. Rear and side attachments can be attached to catch overspray keeping the water in the pan. Supplied with a removable cutting cart for easy cleaning of the tile saw. Specification: Input Power: 240V 1,600W, 110V 1,500WNo Load Speed: 4,200/min.Max. Cut of Depth: 940mmBlade Ø x Bore: 250 x 25.4mmWeight: 45kgDEWALT D36000 Wet Tile Saw 110V Version
The DEWALT DCB1102E2 XR POWERSTACK Starter Kit contains the following: 2 x 18V 2.0Ah DCBP034 XR POWERSTACK Slide Batteries. The DEWALT DCBP034 XR POWERSTACK Slide Battery is 25% smaller and 15% lighter than the DEWALT DCB183 18V XR 2.0Ah battery, making it easier to use in tight workspaces. Stacked pouch cell battery technology provides a low impedance construction, meaning that the rate of flow of electrons is much higher thanks to the innovative internal pouch battery connectors and electrodes. Providing a greater surface area vs a traditional cylindrical battery cell type. It also benefits from superior thermal performance, vs cylindrical batteries. This increases battery durability, improves the cycle life and results. Works with the complete line of 18V XR tools and chargers, bringing a new lease of life and power to existing power tools. 1 x DCB1102 Charger.
The DEWALT DCD703L2T XR Multi-head Drill Driver has a brushless motor for efficient performance and run time. Its compact, lightweight design incorporates an ergonomic grip handle. Supplied with 4 different heads: Off Set head allows the user to get into very tight areas, Right Angle head, Traditional Chuck for day-to-day drilling and a Drop & Load Screwdriver head. Specification: No Load Speed: 1,500/min.Max. Torque: 57.5NmCapacity: Wood 20mm, Metal 10mmWeight: 0.7kg
