The DEWALT DCK2104L2T XR Brushless Twin Pack, contains the following: 1 x 12V DCF801 XR Brushless Sub-Compact Impact Driver with 3 electronic speeds for greater control when working on precise applications. Precision Drive mode is ideal for fine screw work, preventing the screw head or material from being damaged. Compatible with existing 10.8V and 12V slide on batteries. No Load Speed: 0-950/0-1,950/0-2,850/min.Impact Rate: 0-3,600/bpm.Max. Torque: 163Nm.Weight: 0.8kg. (1.76lbs). 1 x 12V DCH072 XR SDS Plus Hammer Drill, a brushless motor for improved run time, and durability. Ideal for drilling anchors, and fixing holes into concrete, brick and masonry. The drill has an ultra-compact design with overmoulded handle and grip areas to enhance grip, and comfort. There is also a bright, white LED with a delay feature for improved visibility. No Load Speed: 910/min.Impact Rate: 4,280/bpm.Impact Energy: 1.1 joules.Capacity: Concrete 14mm, Wood 13mm, Metal 10mm.Weight: 1.7kg (without battery). (3.75lbs). Also supplied with: 2 x 12V 3.0Ah Li-ion Batteries, 1 x Multi-Voltage XR Charger & 1 x TSTAK Kit Box.
The DEWALT DCK2102L2T XR Brushless Twin Pack, contains the following: 1 x 12V DCD706 XR Brushless Sub-Compact Combi Drill has an extremely compact design, with a length of 168mm, allowing you to get into even smaller tight spaces. The Drill has a 15 position adjustable torque control for consistent screwdriving, into a wide variety of materials. Chuck: 10mm Keyless.No Load Speed: 0-425/0-1,500/min.Impact Rate: 25,500/bpm.Max. Torque: 57.5Nm, 15 Settings.Capacity: Masonry/Steel 10mm, Wood 20mm.Weight: 1.2kg. (2.65lbs). 1 x 12V DCH072 XR SDS Plus Hammer Drill has a brushless motor for improved run time and durability. Ideal for drilling anchors, and fixing holes into concrete, brick and masonry. The Hammer Drill has an ultra-compact design with overmoulded handle and grip areas to enhance grip and comfort. There is also a bright, white LED with a delay feature for improved visibility. No Load Speed: 910/min.Impact Rate: 4,280/bpm.Impact Energy: 1.1 joules.Capacity: Concrete 14mm, Wood 13mm, Metal 10mm.Weight: 1.7kg (without battery) (3.75lbs). Also supplied with: 2 x 12V 3.0Ah Li-ion Batteries, 1 x Multi-Voltage XR Charger & 1 x TSTAK Kit Box.
The DEWALT DCK2050E2T XR Brushless POWERSTACK Twin Kit contains the following: 1 x 18V DCD805E2T XR Brushless G3 Combi with an ultra-compact, lightweight design for use in confined spaces. An enhanced pivoting LED positioned on the foot offers greater visibility in dark and confined spaces. POWERSTACK batteries deliver 50% more power with a 25% smaller footprint and work with all DEWALT 18V XR tools. Chuck: 13mmNo Load Speed: 0-650/2,000/min.Impact Rate: 34,000/bpmMax. Torque: 90NmCapacity: Steel 13mm, Masonry 13mm, Wood 55mmWeight: 1.3kg 1 x DCF850 XR Brushless Impact Driver with a 3 mode switch for enhanced control. POWERSTACK batteries deliver 50% more power with a 25% smaller footprint and work with all DEWALT 18V XR tools. Bit Holder: 6.35mm (1/4in)No Load Speed: 0-1,000/2,800/3,250/min.Impact Rate: 3,800/bpmMax. Torque: 205NmWeight: 0.9kg 2 x 18V 2.0Ah Li-ion XR POWERSTACK Slide Batteries. 25% smaller and 15% lighter than the DEWALT DCB183 18V XR 2.0Ah battery, making it easier to use in tight workspaces. Stacked pouch cell battery technology provides a low impedance construction, meaning that the rate of flow of electrons is much higher thanks to the innovative internal pouch battery connectors and electrodes, providing a greater surface area vs a traditional cylindrical battery cell type. It also benefits from superior thermal performance vs cylindrical batteries. This increases battery durability, improves the cycle life and results. Also comes with 1 x TSTAK Kitbox.
The DEWALT DCK2052H2 POWERSTACK Twin Kit, contains the following: 1 x 18V DCD999 XR XRP Combi Drill with FlexVolt ADVANTAGE technology. This unique electronic module features pack identification technology. This enables the tool to recognise when an XR FLEXVOLT battery is attached and can unlock even more power. A foot LED with delay feature, provides improved visibility and flashlight functionality. Chuck Capacity: 1.5-13mm.No Load Speed: 0-500/1,500/2,250/min.Impact Rate: 38,250/bpm.Max. Torque: 67Nm.Max. Drilling Capacity: Metal 15mm, Wood 55mm, Masonry 13mm.Weight: 1.6kg (without battery). 1 x 18V DCF850 XR Brushless Impact Driver comes with a 3 mode switch for enhanced control including Precision Drive which prevents damage to the material and fastener in smaller jobs. POWERSTACK batteries deliver 50% more power with a 25% smaller footprint and work with all DEWALT 18V XR tools. Bit Holder: 6.35mm (1/4in).No Load Speed: 0-1,000/2,800/3,250/min.Impact Rate: 3,800/bpm.Max. Torque: 205Nm.Weight: 0.9kg. Also supplied with: 1 x DCB1104 Charger, 2 x 18V POWERSTACK Li-ion Batteries 5.0Ah & 1 x TSTAK Heavy-duty Kitbox.
The DEWALT DCK2052H1 Twin Kit contains the following: 1 x 18V DCD999 XR XRP Combi Drill comes with FlexVolt ADVANTAGE technology. This unique electronic module features pack identification technology. This enables the tool to recognise when an XR FLEXVOLT battery is attached and to then unlock even more power. A foot LED with delay feature, provides improved visibility and flashlight functionality. Chuck Capacity: 1.5-13mm.No Load Speed: 0-500/1,500/2,250/min.Impact Rate: 38,250/bpm.Max. Torque: 67Nm.Max. Drilling Capacity: Metal 15mm, Wood 55mm, Masonry 13mm.Weight: 1.6kg (without battery). 1 x 18V DCF850E2T XR Brushless Impact Driver comes with a 3 mode switch for enhanced control including Precision Drive which prevents damage to the material and fastener in smaller jobs. POWERSTACK batteries deliver 50% more power with a 25% smaller footprint and they work with all DEWALT 18V XR tools. Bit Holder: 6.35mm (1/4in).No Load Speed: 0-1,000/2,800/3,250/min.Impact Rate: 3,800/bpm.Max. Torque: 205Nm.Weight: 0.9kg. It is supplied with: 1 x 18V POWERSTACK Li-ion Batteries 1.7Ah. 1 x 18V POWERSTACK Li-ion Batteries 5.0Ah. 1 x DCB1104 Charger. 1 x TSTAK Heavy-duty Kitbox.
The DEWALT DCF922 XR Impact Wrench has an efficient brushless motor and 1/2in square drive with detent pin for quick socket changes. Its variable speed trigger provides complete control over all applications and tactile 4-mode select feature, a selection of different modes and speed settings for ultimate performance. * Mode 1 Low Speed: tool operates at a reduced speed and outputs approximately 160Nm, reverse tool operates at normal speed.* Mode 2 Mid Speed: tool operates at a reduced speed and outputs approximately 400Nm, reverse tool operates at normal speed.* Mode 3 High Speed: tool operates at normal speed, reverse tool operates at normal speed.* Mode 4 Precision Wrench: tool pauses before impacting to help prevent over-tightening, reverse tool lowers speed when fastening is loose to help prevent run-off. Its ultra-compact design enables easy access in confined areas. Fitted with a comfortable rubber XR grip and switch for greater application comfort and maximum control. An ultra-bright white LED work light with a delay feature improves visibility. Brightness control allows dimming or turn off to suit the working conditions. Specification: Bit Holder: 1/2in Detent PinNo Load Speed: 2,500/min.Impact Rate: 3,600/bpmMax. Fastening Torque: 406NmNut Busting Torque: 610NmWeight: 1.1kg (without battery)The DEWALT DCF922D2T XR Brushless Impact Wrench is supplied with: 2 x 18V 2.0Ah Li-ion Batteries1 x Charger1 x TSTAK Kitbox
The DEWALT DCF922 XR Impact Wrench has an efficient brushless motor and 1/2in square drive with detent pin for quick socket changes. Its variable speed trigger provides complete control over all applications and tactile 4-mode select feature, a selection of different modes and speed settings for ultimate performance. * Mode 1 Low Speed: tool operates at a reduced speed and outputs approximately 160Nm, reverse tool operates at normal speed.* Mode 2 Mid Speed: tool operates at a reduced speed and outputs approximately 400Nm, reverse tool operates at normal speed.* Mode 3 High Speed: tool operates at normal speed, reverse tool operates at normal speed.* Mode 4 Precision Wrench: tool pauses before impacting to help prevent over-tightening, reverse tool lowers speed when fastening is loose to help prevent run-off. Its ultra-compact design enables easy access in confined areas. Fitted with a comfortable rubber XR grip and switch for greater application comfort and maximum control. An ultra-bright white LED work light with a delay feature improves visibility. Brightness control allows dimming or turn off to suit the working conditions. Specification: Bit Holder: 1/2in Detent PinNo Load Speed: 2,500/min.Impact Rate: 3,600/bpmMax. Fastening Torque: 406NmNut Busting Torque: 610NmWeight: 1.1kg (without battery)The DEWALT DCF922N XR Brushless 1/2in Impact Wrench is supplied as a Bare Unit - No Battery or Charger.
The DEWALT DCH892 XR FlexVolt SDS Max Chipping Hammer has been designed to tackle a variety of demolition jobs. Engineered for fast chipping on hard concrete, its brushless motor can handle a wide variety of applications whilst maintaining a consistent speed under load with constant-speed electronics. Built for comfortable operation, an anti vibration system helps reduce vibration felt by the user at the handles. This highly maneuverable, midweight tool can be used for can be used for horizontal chipping in upper or lower wall areas and concrete surface preparation applications. Wireless Tool Control compatible. This allows the tool to be wirelessly paired with another Wireless Tool Control enabled device for automatic activation and shut down via the app. Comes as a Bare Unit, NO battery or charger supplied. Specification: Impact Rate: 0-2,210/bpmImpact Energy: 19.4 joulesWeight: 8.9kg
The DEWALT DCF921 XR Impact Wrench has an efficient brushless motor and 1/2in square drive with hog ring for quick socket changes. A hole in the anvil enables the securing of sockets with a retaining pin/rubber O-ring, making it the ideal impact wrench for scaffolders. Its variable speed trigger provides complete control over all applications and tactile 4-mode select feature, a selection of different modes and speed settings for ultimate performance. * Mode 1 Low Speed: tool operates at a reduced speed and outputs approximately 160Nm, reverse tool operates at normal speed.* Mode 2 Mid Speed: tool operates at a reduced speed and outputs approximately 400Nm, reverse tool operates at normal speed.* Mode 3 High Speed: tool operates at normal speed, reverse tool operates at normal speed.* Mode 4 Precision Wrench: tool pauses before impacting to help prevent over-tightening, reverse tool lowers speed when fastening is loose to help prevent run-off. Its ultra-compact design enables easy access in confined areas. Fitted with a comfortable rubber XR grip and switch for greater application comfort and maximum control. An ultra-bright white LED work light with a delay feature improves visibility. Brightness control allows dimming or turn off to suit the working conditions. Comes with a 1 Year Warranty. Specifications: Bit Holder: 1/2in Hog Ring.No Load Speed: 2,500/min.Impact Rate: 3,600/bpm.Max. Fastening Torque: 406Nm.Nut Busting Torque: 610Nm.Weight: 1.1kg (without battery).The DEWALT DCF921P2T XR Brushless 1/2in Impact Wrench is supplied with: 2 x 18V 5.0Ah Li-ion Batteries1 x Charger1 x TSTAK Kitbox
The DEWALT DCH273 XR Brushless SDS Plus Hammer has a category-leading high speed drilling performance at more than 90 holes (10 x 80mm) per charge. The hammer comes with a rotation stop mode for light chiselling in plaster, tiles and render, and impact stop mode for rotary only drilling in wood and metal. Fitted with an electronic clutch for consistently high torque and improved durability, and ideal for drilling anchors and fixing holes into concrete, brick and masonry from 4 to 24mm. Its compact, lightweight and ergonomic design provide improved comfort and support during extended operating periods. It also has a bright white LED with delay feature for improved visibility. Specifications: Modes: Rotary, SDS Hammer, Chisel only.No Load Speed: 0-1,100/min.Impact Rate: 0-4,600/bpm with 2.1 joules.Capacity: Wood 26mm, Metal 13mm, Masonry 24mm.Weight: 3.1kg.The DEWALT DCH273H2T XR Brushless SDS Plus 3 Mode Hammer has a category-leading high speed drilling performance at more than 90 holes (10 x 80mm) per charge. The hammer comes with a rotation stop mode for light chiselling in plaster, tiles and render, and impact stop mode for rotary only drilling in wood and metal. Fitted with an electronic clutch for consistently high torque and improved durability, and ideal for drilling anchors and fixing holes into concrete, brick and masonry from 4 to 24mm.Its compact, lightweight and ergonomic design provide improved comfort and support during extended operating periods. It also has a bright white LED with delay feature for improved visibility. It is supplied with the following specifications: 2 x 18V POWERSTACK Li-ion Batteries 5.0Ah.1 x DCB1104 Multi-Voltage XR Li-ion Charger.1 x Belt Hook.1 x Multi-Position Side Handle.1 x TSTAK Heavy-duty Kitbox.
The DEWALT DCH072 XR SDS Plus Hammer Drill has a brushless motor for improved run time and durability. Ideal for drilling anchors and fixing holes into concrete, brick and masonry. It has an ultra-compact design with overmoulded handle and grip areas to enhance grip and comfort. There is also a bright, white LED with a delay feature for improved visibility. Specification: No Load Speed: 910/min.Impact Rate: 4,280/bpm with 1.1 joulesCapacity: Concrete 14mm, Wood 13mm, Metal 10mmWeight: 1.7kg (without battery)The DEWALT DCH072L2 XR Brushless SDS-Plus Hammer Drill is supplied with: 2 x 12V 3.0Ah Li-ion Batteries1 x Charger
The DEWALT DCG440N XR FlexVolt Angle Grinder has a high-power brushless motor for extended durability, efficiency and power. An advanced electronic control module enables soft start and effective braking. The handle incorporates overmoulded grips and a side handle for ultimate usability and comfort. An E-Clutch and Kickback-Brake ensure maximum user protection. Fitted with a keyless guard allows for quick and easy guard adjustments, without tools. Dust guards and power off electronic overload protection, guard against harsh working conditions. Supplied as a Bare Unit - No Battery or Charger. Specification: No Load Speed: 6,500/min.Disc Diameter: 180mmMax. Depth of Cut: 55mmSpindle: M14/22.23mmWeight: 2.2kg
The DEWALT DCG409VS XR FlexVolt Advantage Grinder uses intelligent electronics to sense what battery is in the tool. Both power and torque are increased when using XR FlexVolt batteries. This grinder providing up to 42% more power when used with XR batteries compared to standard 18V packs.An adjustable variable speed dial allows the user to pre-set speeds for more control and correct application. The brushless motor provides increased run time and durability while an electronic soft start allows for a more controlled start-up. This DEWALT product has protective mesh dust guards offering additional protection against motor contamination and increasing tool durability. Its electronic brake and clutch work quickly to keep you safe and the rubber overmoulded rear and side handles increase user comfort and control.Comes as a Bare Unit, NO battery or charger provided. Supplied with: 1 x 2-Position Side Handle, 1 x Keyless Protective Guard, 1 x Hex Key, 1 x Inner Disc Flange, 1 x Outer Disc Flange and 1 x TSTAK Kitbox. Specifications: No Load Speed: 3,000-9,000/min.Max. Disc Diameter: 125mm.Spindle Thread: M14.Weight: 1.8kg (without battery).
The DEWALT DCG409 XR Advantage Grinder has a brushless motor provides increased run time and durability. An electronic soft start allows for a more controlled start-up. Protective mesh dust guards offer additional protection by protecting against motor contamination, increasing tool durability.FlexVolt ADVANTAGE technology. This unique electronic module features pack identification technology. This enables the tool to recognise when an XR FLEXVOLT battery is attached and unlock even more power.Its electronic brake and clutch work quickly to keep you safe. The rubber overmoulded rear and side handles increase user comfort and control. Supplied as standard: 1 x 2-Position Side Handle1 x Keyless Protective Guard1 x Hex Key1 x Inner Disc Flange1 x Outer Disc Flange Specification: No Load Speed: 9,000/min.Max. Disc Diameter: 125mmSpindle Thread: M14Weight: 1.8kg (without battery)The DEWALT DCG409H2T XR Advantage Grinder 125mm has a brushless motor provides increased run time and durability. An electronic soft start allows for a more controlled start-up. Protective mesh dust guards offer additional protection by protecting against motor contamination, increasing tool durability.FlexVolt ADVANTAGE technology. This unique electronic module features pack identification technology. This enables the tool to recognise when an XR FLEXVOLT battery is attached and unlock even more power.Its electronic brake and clutch work quickly to keep you safe. The rubber overmoulded rear and side handles increase user comfort and control. Supplied with:2 x 18V POWERSTACK Li-ion Batteries 5.0Ah.1 x DCB1104 Charger.1 x 2-Position Side Handle.1 x Keyless Protective Guard.1 x Hex Key.1 x Inner Disc Flange.1 x Outer Disc Flange.1 x TSTAK Heavy-duty Kitbox. Specifications: No Load Speed: 9,000/min.Max. Disc Diameter: 125mm.Spindle Thread: M14.Weight: 1.8kg (without battery).
The DEWALT DCF923 XR Impact Wrench has an efficient brushless motor and 3/8in square drive with hog ring for quick socket changes. Its variable speed trigger provides complete control over all applications and tactile 4-mode select feature, a selection of different modes and speed settings for ultimate performance. * Mode 1 Low Speed: tool operates at a reduced speed and outputs approximately 160Nm, reverse tool operates at normal speed.* Mode 2 Mid Speed: tool operates at a reduced speed and outputs approximately 400Nm, reverse tool operates at normal speed.* Mode 3 High Speed: tool operates at normal speed, reverse tool operates at normal speed.* Mode 4 Precision Wrench: tool pauses before impacting to help prevent over-tightening, reverse tool lowers speed when fastening is loose to help prevent run-off. Its ultra-compact design enables easy access in confined areas. Fitted with a comfortable rubber XR grip and switch for greater application comfort and maximum control. An ultra-bright white LED work light with a delay feature improves visibility. Brightness control allows dimming or turn off to suit the working conditions. Supplied as a Bare Unit - No Battery or Charger. Specification: Bit Holder: 3/8in Hog RingNo Load Speed: 2,500/min.Impact Rate: 3,600/bpmMax. Fastening Torque: 406NmNut Busting Torque: 610NmWeight: 1.1kg (without battery)
The DEWALT DCF922 XR Impact Wrench has an efficient brushless motor and 1/2in square drive with detent pin for quick socket changes. Its variable speed trigger provides complete control over all applications and tactile 4-mode select feature, a selection of different modes and speed settings for ultimate performance. * Mode 1 Low Speed: tool operates at a reduced speed and outputs approximately 160Nm, reverse tool operates at normal speed.* Mode 2 Mid Speed: tool operates at a reduced speed and outputs approximately 400Nm, reverse tool operates at normal speed.* Mode 3 High Speed: tool operates at normal speed, reverse tool operates at normal speed.* Mode 4 Precision Wrench: tool pauses before impacting to help prevent over-tightening, reverse tool lowers speed when fastening is loose to help prevent run-off. Its ultra-compact design enables easy access in confined areas. Fitted with a comfortable rubber XR grip and switch for greater application comfort and maximum control. An ultra-bright white LED work light with a delay feature improves visibility. Brightness control allows dimming or turn off to suit the working conditions. Specification: Bit Holder: 1/2in Detent PinNo Load Speed: 2,500/min.Impact Rate: 3,600/bpmMax. Fastening Torque: 406NmNut Busting Torque: 610NmWeight: 1.1kg (without battery)The DEWALT DCF922P2T XR Brushless 1/2in Impact Wrench is supplied with: 2 x 18V 5.0Ah Li-ion Batteries1 x Charger1 x TSTAK Kitbox
The DEWALT DCF891 XR 1/2in Hog Ring Anvil Impact Wrench was designed to comfortably handle various fastening projects. Choose between 4 modes to allow for reliable high-level performance, operability, and versatility. The compact ergonomic design offers easy maneuverability without sacrificing power. Fitted with an LED work light for visibility in dimly lit spaces. Specifications: Bit Holder: 1/2in Hog Ring Anvil.No Load Speed: 0-2,000/min.Impact Rate: 0-3,250/bpm.Max. Torque: 812Nm.Max. Bolt Diameter: M4.The DEWALT DCF891P2T XR Brushless Impact Wrench is supplied with the following: 2 x 18V 5.0Ah Li-ion Batteries1 x Charger1 x TSTAK Kitbox
The DEWALT DCF900 XR High Torque Impact Wrench has an efficient brushless motor delivers high performance, extends tool life and allows for much shorter design. Its variable trigger provides complete control over all applications.The compact design enables easy access in confined areas. Fitted with a comfortable rubber XR grip and switch for greater application comfort and maximum control. An ultra-bright white LED work light with a delay feature improves visibility. Brightness control allows dimming or turn off to suit the working conditions. Specifications: Bit Holder: 1/2in Square Drive.No Load Speed: 0-2,300/min.Impact Rate: 18,000/bpm.Max. Torque: 1,396Nm, Breakaway Torque: 1,898Nm.Weight: 2.8kg (without battery).The DEWALT DCF900H2T XR Brushless 1/2in High Torque Impact Wrench is supplied with: 2 x 5.0Ah POWERSTACK Li-ion Batteries.1 x Multi-Voltage Charger.1 x TSTAK Kitbox.
DEWALT DCF850E2T XR Brushless Impact Driver with a 3 mode switch for enhanced control including Precision Drive which prevents damage to the material and fastener in smaller jobs. Its compact design makes it ideal for a wide range of applications in construction, industrial and automotive environments. The LED ring light delivers the best visibility in the toughest environments. POWERSTACK batteries deliver 50% more power* with a 25% smaller** footprint and work with all of the 18V XR tools you already have. * Regarding 50% more power: vs DCB183 battery, not in application. ** Regarding 25% smaller pack and a more compact footprint: vs DCB183 battery. Supplied with: 2 x 18V 2.0Ah POWERSTACK Li-ion Batteries, 1 x Charger and 1 x TSTAK Kitbox. Specification: Bit Holder: 6.35mm (1/4in)No Load Speed: 0-1,000/2,800/3,250/min.Impact Rate: 3,800/bpmMax. Torque: 205NmWeight: 0.9kg
The DEWALT DCF921 XR Impact Wrench has an efficient brushless motor and 1/2in square drive with hog ring for quick socket changes. A hole in the anvil enables the securing of sockets with a retaining pin/rubber O-ring, making it the ideal impact wrench for scaffolders. Its variable speed trigger provides complete control over all applications and tactile 4-mode select feature, a selection of different modes and speed settings for ultimate performance. * Mode 1 Low Speed: tool operates at a reduced speed and outputs approximately 160Nm, reverse tool operates at normal speed.* Mode 2 Mid Speed: tool operates at a reduced speed and outputs approximately 400Nm, reverse tool operates at normal speed.* Mode 3 High Speed: tool operates at normal speed, reverse tool operates at normal speed.* Mode 4 Precision Wrench: tool pauses before impacting to help prevent over-tightening, reverse tool lowers speed when fastening is loose to help prevent run-off. Its ultra-compact design enables easy access in confined areas. Fitted with a comfortable rubber XR grip and switch for greater application comfort and maximum control. An ultra-bright white LED work light with a delay feature improves visibility. Brightness control allows dimming or turn off to suit the working conditions. Comes with a 1 Year Warranty. Specifications: Bit Holder: 1/2in Hog Ring.No Load Speed: 2,500/min.Impact Rate: 3,600/bpm.Max. Fastening Torque: 406Nm.Nut Busting Torque: 610Nm.Weight: 1.1kg (without battery).The DEWALT DCF921N XR Brushless 1/2in Impact Wrench is supplied as a Bare Unit - No Battery or Charger.
The DEWALT DCF921 XR Impact Wrench has an efficient brushless motor and 1/2in square drive with hog ring for quick socket changes. A hole in the anvil enables the securing of sockets with a retaining pin/rubber O-ring, making it the ideal impact wrench for scaffolders. Its variable speed trigger provides complete control over all applications and tactile 4-mode select feature, a selection of different modes and speed settings for ultimate performance. * Mode 1 Low Speed: tool operates at a reduced speed and outputs approximately 160Nm, reverse tool operates at normal speed.* Mode 2 Mid Speed: tool operates at a reduced speed and outputs approximately 400Nm, reverse tool operates at normal speed.* Mode 3 High Speed: tool operates at normal speed, reverse tool operates at normal speed.* Mode 4 Precision Wrench: tool pauses before impacting to help prevent over-tightening, reverse tool lowers speed when fastening is loose to help prevent run-off. Its ultra-compact design enables easy access in confined areas. Fitted with a comfortable rubber XR grip and switch for greater application comfort and maximum control. An ultra-bright white LED work light with a delay feature improves visibility. Brightness control allows dimming or turn off to suit the working conditions. Comes with a 1 Year Warranty. Specifications: Bit Holder: 1/2in Hog Ring.No Load Speed: 2,500/min.Impact Rate: 3,600/bpm.Max. Fastening Torque: 406Nm.Nut Busting Torque: 610Nm.Weight: 1.1kg (without battery).The DEWALT DCF921H2T XR BL 1/2in Impact Wrench has an efficient brushless motor and 1/2in square drive with hog ring for quick socket changes. A hole in the anvil enables the securing of sockets with a retaining pin/rubber O-ring, making it the ideal impact wrench for scaffolders.Its variable speed trigger provides complete control over all applications and tactile 4-mode select feature, a selection of different modes and speed settings for ultimate performance. * Mode 1 Low Speed: tool operates at a reduced speed and outputs approximately 160Nm, reverse tool operates at normal speed.* Mode 2 Mid Speed: tool operates at a reduced speed and outputs approximately 400Nm, reverse tool operates at normal speed.* Mode 3 High Speed: tool operates at normal speed, reverse tool operates at normal speed.* Mode 4 Precision Wrench: tool pauses before impacting to help prevent over-tightening, reverse tool lowers speed when fastening is loose to help prevent run-off. Its ultra-compact design enables easy access in confined areas. Fitted with a comfortable rubber XR grip and switch for greater application comfort and maximum control. An ultra-bright white LED work light with a delay feature improves visibility. Brightness control allows dimming or turn off to suit the working conditions. Comes with a 1 Year Warranty. It is supplied with:2 x 18V POWERSTACK Li-ion Batteries 5.0Ah.1 x DCB1104 Charger.1 x TSTAK Heavy-duty Kitbox. Specifications: Bit Holder: 1/2in Hog Ring.No Load Speed: 2,500/min.Impact Rate: 3,600/bpm.Max. Fastening Torque: 406Nm.Nut Busting Torque: 610Nm.Weight: 1.1kg (without battery).
The DEWALT DCF921 XR Impact Wrench has an efficient brushless motor and 1/2in square drive with hog ring for quick socket changes. A hole in the anvil enables the securing of sockets with a retaining pin/rubber O-ring, making it the ideal impact wrench for scaffolders. Its variable speed trigger provides complete control over all applications and tactile 4-mode select feature, a selection of different modes and speed settings for ultimate performance. * Mode 1 Low Speed: tool operates at a reduced speed and outputs approximately 160Nm, reverse tool operates at normal speed.* Mode 2 Mid Speed: tool operates at a reduced speed and outputs approximately 400Nm, reverse tool operates at normal speed.* Mode 3 High Speed: tool operates at normal speed, reverse tool operates at normal speed.* Mode 4 Precision Wrench: tool pauses before impacting to help prevent over-tightening, reverse tool lowers speed when fastening is loose to help prevent run-off. Its ultra-compact design enables easy access in confined areas. Fitted with a comfortable rubber XR grip and switch for greater application comfort and maximum control. An ultra-bright white LED work light with a delay feature improves visibility. Brightness control allows dimming or turn off to suit the working conditions. Comes with a 1 Year Warranty. Specifications: Bit Holder: 1/2in Hog Ring.No Load Speed: 2,500/min.Impact Rate: 3,600/bpm.Max. Fastening Torque: 406Nm.Nut Busting Torque: 610Nm.Weight: 1.1kg (without battery).The DEWALT DCF921D2T XR Brushless 1/2in Impact Wrench is supplied with: 2 x 18V 2.0Ah Li-ion Batteries1 x Charger1 x TSTAK Kitbox
The DEWALT DCF513 XR 3/8in Open Head Ratchet has a brushless motor that delivers up to 81Nm Torque, ideal for use with a wide variety of fastener sizes and applications. It also has a variable speed trigger that helps you alter output based on the application. The narrow motor design ensures easier access into tight spaces. Ergonomic soft grips increase comfort and reduce fatique. Its glass-filled nylon housing provides added strength and protects from oils and solvents. There is also a bright LED work light, ideal when working in dark spaces. Comes as a Bare Unit, NO battery or charger supplied. Specification: No Load Speed: 250/min.Max. Fastening Torque: 81NmLength: 360mmWeight: 1.08kg (without battery)
The DEWALT DCF900 XR High Torque Impact Wrench has an efficient brushless motor delivers high performance, extends tool life and allows for much shorter design. Its variable trigger provides complete control over all applications.The compact design enables easy access in confined areas. Fitted with a comfortable rubber XR grip and switch for greater application comfort and maximum control. An ultra-bright white LED work light with a delay feature improves visibility. Brightness control allows dimming or turn off to suit the working conditions. Specifications: Bit Holder: 1/2in Square Drive.No Load Speed: 0-2,300/min.Impact Rate: 18,000/bpm.Max. Torque: 1,396Nm, Breakaway Torque: 1,898Nm.Weight: 2.8kg (without battery).The DEWALT DCF900P2T XR Brushless 1/2in High Torque Impact Wrench is supplied with: 2 x 18V 5.0Ah Li-ion Batteries1 x Multi-Voltage Charger1 x TSTAK Kitbox
