The Bulldog Insulated Treaded Cable Layer is the perfect tool for any contractor in need of a reliable and heavy-duty cable laying shovel. Forged from one piece of steel with an epoxy paint coating to provide optimum protection against corrosive substances, the shovel has round corner blades to reduce penetration damage to underground pipes and cables. The treads on this tool enable you to use more force and also acts as boot protection. Fitted with a one piece, heavy-duty fibreglass YD handle. Manufactured to BS8020. Individually tested to 10,000 volts, guaranteed to 1,000 volts, and supplied with a Certificate of Conformity.
Ash Handle with Plastic 'D' Grip. Is an ideal tool for shoveling out or backfilling trenches, concrete mixing, working tarmac and moving cement chippings etc. With an unvarnished hardwood shaft for strength and durability. The Standard Contractor range is designed with the usual Bulldog attention to detail but aimed at the budget-conscious contractor. Size: No.2. Blade: 315 x 250mm.
Roughneck Cold Chisel made from drop-forged steel, heat-treated and tempered. They have a black powder-coated finish.Roughneck ROU31980 Cold Chisel 254 x 25mm (10 inch x 1.inch) 19mm Shank.
This Edma Universal Slaters hammer is hand forged with a leather handle. It features a nail puller and has left and right bevels. The hammer has a polished finish. Weight: 650g.
The Faithfull open socket round mouth shovel fitted with a long straight handle traditionally used in the West Country. Blade: 300 x 275mm (12 x 11in).Handle: 1300mm (52in).
The Roughneck Bonsai Moulding Bar™ is made from forged alloy steel that has been hardened and tempered. With a painted finish and polished tips. It has an extra wide chisel blade for removing mouldings, architraves, picture rails and skirting boards without damaging the surrounding surface. There is also a nail removing head and a heel that can be struck with a hammer.
The Roughneck Fencing Pins have a top hook for securing rope or hazard tape when marking off areas where work is in progress or where general access is restricted. They are fully painted black to protect against rust. The tips are hardened for use in hard ground.5 x Roughneck Fencing Pins 12mm x 1300mm
The Roughneck Utility Bars are manufactured from stamped alloy steel that has been hardened and tempered. They have a painted and powder coated finish with polished tips and an integral nail puller to remove embedded nails.1 x Roughneck Utility Bar 380mm (15in)
Brick bolster made from drop-forged steel, heat-treated and tempered.With black powder-coated finish.The Roughneck ROU31992 Brick Bolster & Grip 102mm x 216mm (4in x 8.1/2in) 22mm Shank
This Roughneck Fencing Maul is ideal for driving home wooden fencing posts. The large round striking face makes it much easier and safer than using a sledgehammer. Cast head with double round striking faces. Solid core fibreglass handle with polypropylene jacket for shock absorbance. Double injected TPR soft-grip handle for added comfort fixed with industrial grade epoxy for longer lasting bond.1 x Roughneck Fencing Maul 4.53kg (10lb)
Flex Tubs are ideal for use around the garden, home, on the building site, farm or stables. This lightweight, heavy-duty polyethylene, flexible tub features super-strong comfortable handles and is ideal for solids and fluids.Environmentally friendly Flex Tubs are manufactured from 100% recyclable material.Colour: YellowSize: 15 Litre (3 gal)
The Faithfull hand operated wall coating sprayer is ideal for applying Tyrolean and Roughcast wall covering material on both interior and exterior walls. It is supplied with an easy to remove reducer plate for small area and re-touching work. An adjustable pressure bar allows for texture control. The casing and reducer plate are made from stainless steel for rust prevention. A replacement comb roller is available.
Quality chrome vanadium steel, increased strength and durability for all metalwork tasks from chipping and shaping wrought iron, cast iron, steel, brass, bronze, copper and aluminium to cutting bolts, nuts and rivets. Quenched and tempered to precise specifications for added safety.Size: 200 x 22mm (8 x 7/8 in).
The Bulldog Square Punner (tamper) has a one piece head design and a large, square, solid-cast head. The handle is made from tubular steel. It is ideal for finishing work on asphalt surface, to tamp up close to walls and corners where mechanical rollers leave ridges or cannot get access. Part of Bulldog's Premier Agricultural Tool range, manufactured to the highest possible specification to guarantee quality. Made In Britain.
The Hultafors 207 Steel Pinch Bar is made from 6-square high quality steel. It has a wide and thin chisel make it easy to use in narrow spaces. The long and cone shaped tip can be used for aligning flanges with bolt holes and the cone tip facilitates the installation of O-rings. The cone shaped tip is long and evenly grinded and both ends are unpainted to avoid discolouration.1 x Hultafors 207 Steel Pinch Bar 600mm (24in)
This BlueSpot lightweight and weatherproof Tarpaulin is mould and mildew resistant, with rust-proof grommets. Its welded hems provide extra strength.Ideal for storage and transportation purposes. Ideal for the following applications: Roof rack coverBoat coverPool or sandpit coverPicnics and campingOutdoor shelterHaystack coverActual size 2600 x 1650mm (102 x 66in)
High-quality maganese steel, forged square mouthed shovel with an extra long socket for added strength. The FSC European Ash shaft is securely riveted to the socket and has a T-Handle. Size: 000.Shaft: 700mm (28in).Blade: 265 x 200mm (10.5 x 8in).
The Roughneck Laminate Flooring Cutter is a sturdy product offering a fast, dust and noise free alternative to a power or handsaw for laminate flooring. All metal construction with guillotine action blade. It can provide a clean cut at 90° on 150mm (6in) or 200mm (8in) boards up to 11mm (7/16in) thick.
Scutch combs are designed to fit into a scutch comb holder when preparing stone and masonry etc. The size of the scutch comb must be the same width as the comb holder being used. These Roughneck Scutch Combs are made from strong carbon steel, which is zinc coated for increased resistance to corrosion. They are contractor grade and come with a lifetime guarantee. Size: 25mm (1 inch).Pack of 5
The Roughneck Gorilla Moulding Bar has a wide jaw end, ideal for scraping and prying trim from walls. The head features a striking face allowing the bevelled jaws to be punched deep into the material to pry out embedded nails. Drop-forged hardened and tempered steel construction for extreme strength and durability. It also has polished tips and 2 x nail removers.1 x Roughneck Gorilla Moulding Bar 250mm (10in)
These Faithfull Sanding Sheets have notched ends to enable fitting to most clip-in type pole sanders. Ideal for use on drywall. Specification: Size: 280 x 100mmGrit: 120Pack Size: 25
Open ended cranked podger spanners manufactured from chrome alloy steel with a corrosion resistant black finish.The tapered end is generally used for hole alignment.Size 19mm.Length 281mm.
This Combination Podger Scaffold Spanner has a hardened and tempered handle which has a tapered square end suitable for use on scaffold eye bolts and hex whitworth sockets.Length: 250mm.Size 7/16 in Whitworth.
Short bent aluminium reversible ratchet podger, made of super-light, super-strong aircraft aluminium. It weighs only 140g (5oz)- half the weight of the same spanner in steel, and has a hole for attaching a lanyard. It has a flush box for use when space is restricted, and a flick switch for quickly changing the direction of the head. Reversible box-type socket, 19mm on one side for use on aluminium beam bolts, and a 21mm (7/16 W) on the other. Length: 240mm (9.1/2in).
The Matabi Construplus 7 Sprayer is specially developed for the construction industry. It is made from maximum strength materials and has Viton seals, PE filters and PP nozzles, which are suitable for use with many different chemical products. This versatile sprayer is suitable for many uses, including:ShutteringWaterproofingCleaningDescalingDegreasingMachinery maintenance. The sprayer is supplied with 2 nozzles. One nozzle has an elbow and is resistant to acids and strong chemicals. The other is a disc nozzle which is suitable for emulsions, oil emulsions and organic releasing agents. It also comes with a 0.42m extension and a 0.25m flexible tube. Specifications: Total capacity: 7 Litres.Working capacity: 5 Litres.Lance length: 0.58m.Hose length: 1.3m.
The DEWALT Pro Mixing Paddle has a unique design that reduces drag and wear on a power drill by 20%. It also enables splatter-free operation by pulling material down into the centre of the mixer head, versus throwing it against the bucket. This mixing action virtually eliminates the introduction of air bubbles. Made from durable carbon steel that has been plated for corrosion protection and easy clean-up. Fitted with a universal mixing attachment. Ideal for drywall joint compound, grout, plaster, paint etc. Specification: Shaft: 1/2inLength: 812mm (32in)Mixing Head: 177mm (7in)
The DEWALT Mixer Adaptor is made from heavy-duty, plated carbon steel. It adapts a Hex shaft to a threaded attachment. Fits any size Hex shaft mixer. Supplied with a Hex key.
Forged from chrome vanadium steel for increased strength and durability. Blade holds its edge longer and therefore needs less sharpening.Less grinding equals longer life. Hardened, quenched and tempered to precise specifications for added safety. Modified parabolic striking end for greater resistance to mushrooming and chipping.Bi-Material handguard for increased comfort and protection from overstrike. Size: 300 x 25mm (12 x 1 in).
The Roughneck Trenching Tamper has a reinforced cast iron head with a perfectly flat face. They have strong but lightweight fibreglass handles with soft cushion grip for comfort.This Roughneck Earth Rammer (Tamper) has the following specification: Head Weight: 6.3kg (13.8lb).Head Size: 250mm² (10in²).Handle Length: 1.06m (42in).
Designed to give a professional finish to joints between bricks. Made from high carbon steel, hard tempered and polished. Convenient double ended cranked design. Made in USA.Size 12 and 16mm (1/2 and 5/8 in).
Designed for clearing out mortar from between brickwork prior to pointing. The strong aluminium handle is contoured to fit the hand and squared off at the end. With 2 large hard-wearing wheels and replaceable point. Size: 8.1/2in x 3in