The Faithfull Pry Bar/Nail Lifter has been manufactured from high quality carbon steel and has a 90º angle head for rapid nail removal. It has a small profile for removal of nails in confined spaces, and a wide, flat claw provides a firm base to prevent sideways movement. Designed for pulling nails, prying, and general dismantling of timber constructions.
The Stanley STHT2-28042 Mixing Paddle is a hexagonal rod that will fit a standard drill and is perfect for mixing compound, paint and other materials. The mixer has wings and a protective extension so they do not come in to contact with the bucket. Specification Length: 400mm.Diameter: 80mm.Maximum Capacity: 10kg.Minimum Capacity: 5kg.
The Vitrex Mixing Paddles are designed to mix sticky and viscous materials, such as tile adhesive, bonding mortar, jointing compound, ready mixed plaster, floor screed and fillers. Suitable for use with the MIX850 Power Mixer and MIX1400 Power Mixer.The Vitrex MIXADH140 Mixing Paddle has the following specifications: Blade Diameter: 140mm.Length: 600mm.
Wrecking bars are an essential tool for all builders, carpenters and plumbers and widely used in factories, warehouses and the farming industry. Manufactured from octagonal steel cross section with hardened and tempered chisel and claw ends, which ensure maximum strength and durability. For opening packing cases, pulling out nails, levering off shuttering etc.Size: 750 x 19mm (30 x 3/4 in).
The Hultafors H 700 B Aluminium Bending Bar is made with a bent tip. Originally produced to test wheel bearings on cars, but also used by locksmiths to adjust door fittings. As aluminium does not rust, it has a better resistance to extreme temperatures and is also more flexible than steel tools.
The Faithfull Pick Axe has a high quality solid eye navy pick head with chisel and point for the breaking of concrete. This tool is virtually unbreakable and incorporates a soft-grip, non-slip fibreglass handle.
This Roughneck® Round Shovel has a sharp serrated edge, ideal for digging in compacted ground, slicing through roots and opening bulk bags or bags of cement. Built to last, it is manufactured from heavy-duty, carbon steel with a corrosion-resistant, tumble lacquered finish. With a tubular fibreglass shaft for reduced overall weight and fitted with a soft grip, D-shaped handle for comfort in use. Treads on the blade allow for increased pressure to be applied with reduced risk of slippage. The Power Ring socket, steel-reinforced plug, provides a stronger blade to handle connection. Specification: Blade Width: 225mmOverall Length: 1070mm (42in)
The IRWIN carbide tipped mortar rake kit is a power tool accessory for the fast and efficient removal of mortar and cement joints in brickwork repointing applications and for chasing out channels for the installation of cable, pipes and switchboxes. Supplied with 3 aluminum reduction rings (41mm, 42.5mm and 43mm), meaning that the sole plate fits the most popular angle grinders on the market. The sole plate ensures consistent clearance depth and is adjustable for variable clearance depths. It is less intrusive to surrounding brickwork and is a good alternative to working with demolition chisels or grinding discs, which can easily cause damage.Please read the instruction manual carefully before using the mortar rake. Only use mortar rakes with adaptor and sole plate.The IRW10507267 Mortar Rake Starter Kit comes with the following:1 x Sole plate. 2 x 3-cutters (8mm). 1 x Adaptor.3 x Aluminium reduction rings (41mm, 42.5mm and 43mm).
The Sievert 50mm 86kW Power Burner is a heavy-duty, lightweight power burner with extremely strong windproof flames capable of withstanding the severest weather conditions. Ideal for drying, bitumen laying, detail and field torching and other demanding applications. For use with PRMS3509, PRMS3510 or PRMS3511.
The Broadfix Flat Packers have been manufactured with a high percentage of post-consumer recycled material. As they are made from plastic they will not swell, shrink or rot, they are completely waterproof. Capable of withstanding higher compressive loads than traditional timber flat packers. This also makes them more economical. They are colour coded depending on size, for easy identification. Sometimes referred to as a glazing packer or shim, and is a great multi-purpose shim. They are ideal for narrower shimming jobs. Stack to the required depth, slide in and you're done. The micro ridged surface prevents slippage under load.The Broadfix Flat Packers Mixed Bag has the following specification: Size: 100 x 28mm, Thickness: 1-6mm.Number of Pieces: 120 Pieces Total (20 each of 1-6mm).
The Stanley FatMax® Spring Steel Wrecking Bars is an ideal tool for all builders, carpenters and plumbers and is widely used in factories, warehouses and the farming industry. Manufactured from round spring steel, which is hardened and tempered to ensure maximum strength and durability, and with double ended claw ends. Ideal for opening packing cases, pulling out nails, levering off, shuttering etc.1 x Stanley FatMax® Spring Steel Wrecking Bar 900mm (36in)
This RST Drywall Putty Knife is a drywall lining tool. It has a comfortable soft touch handle which provides excellent grip.Flexible blade. Size: 15.2cm (6 inch).
This RST Drywall Putty Knife is a drywall lining tool. It has a comfortable soft touch handle which provides excellent grip.Flexible blade. Size: 5cm (2 inch).
The Roughneck MUTT PRO Multipurpose Demolition Scraper is ideal for cutting, chopping, digging, edging, scraping, trenching and much more. It has a durable, corrosion-resistant solid fibreglass core shaft with comfortable double-injected D-grip handle. The forged steel, heat-treated blade is powder-coated with a polished tip to offer greater resistance to corrosion and can be re-sharpened to maintain the cutting edge. Blade Size: 100mm (4in)
The Roughneck Micro Pick/Cutter Mattock Set is perfect for working in confined spaces. The set contains one micro pick - ideal for hard ground and removing mortar, and one cutter mattock - ideal for soft ground and cutting roots. Both are fitted with a strong yet lightweight, fibreglass core handle that features a soft grip for added comfort. The heads are drop-forged, heat-treated and powder coated for maximum strength and durability.
The Roughneck Pick Mattock has a head made from roll forged alloy steel, hardened and tempered and with a black painted finish. Pointed pick at one end and mattock on the other, ideal for cutting roots and breaking up soil. The fibreglass handle has a solid core and polypropylene cover. Supplied in a handy carry box.
The Rougneck Micro Pick Mattock is made from drop-forged steel, hardened and tempered with black painted finish. It has a pointed pick at one end and a mattock at the other. The fibreglass handle is strong yet lightweight, and the soft rubber grip provides comfort. They are ideal for use in confined spaces, such as in trenches, or between beddings, and can easily be carried in tool bags.
The Roughneck Bonsai Claw Bar™ is made from drop-forged alloy steel that has been hardened and tempered. With a painted finish and polished tips. Its low profile claw design means it can easily fit into small spaces. There is also a nail removing head and a heel that can be struck with a hammer.
The Roughneck Tarmac Rake has an all steel construction with 16 welded round teeth. Its long tubular steel handle is fitted with a soft grip for increased comfort during prolonged use.
Roughneck 3 Piece Bolster & Chisel Set with Non-Slip Guards is manufactured from drop-forged and heat-treated superior quality chrome vanadium steel to ensure outstanding toughness and long-life performance. The 45 degree single chamfer cutting edge offers the optimal balance between cutting performance and longevity. Each piece is equipped with a patented non-slip guard that securely locks onto the shaft. Eliminates the age-old problem of grips slipping up the shaft during impact. Additionally, the guard can be removed within seconds to improve access in tight areas or to aid flush cutting. This 3 piece set contains: 1 x Cold Chisel with Non-Slip Hand Guard: 25 x 279mm (1 x 11in)2 x Brick Bolsters with Non-Slip Hand Guards: 76 x 279mm (3 x 11in) and 102 x 279mm (4 x 11in)
The Faithfull round mouth No 2 shovel pressed from high-quality manganese steel and fitted with an FSC European Ash shaft 700mm (28in) and T hilt. Socket polished for comfort in use. Size: No.2.Blade: 300 x 240mm (12 x 9.1/2in).Shaft: 700mm (28in).
This R.S.T. Taping Knife is suitable for drywall lining. It has a soft touch handle for increased user comfort.The blade is made from blued steel. Size: 200mm (8 inch).
The R.S.T. Drywall Scratcher has a steel construction and is fitted with a soft touch handle for increased user comfort. Used for scratching plaster undercoat making it easier for the new plaster to stick. Blade Size: 150 x 250mm (6 x 10in)
The Bulldog Insulated Pick Handle incorporates a protective collar to stop your hand from slipping. Made from one piece of heavy-duty fibreglass for superior strength and durability. This tool can be used in conjunction with a number of pick heads. Please note: pick handles are tested to BS8020/2011 for insulating purposes only. We cannot take responsibility for any tool heads used in conjunction with this handle, or which may alter the properties of the handle.
The Roughneck Gorilla Fencing Maul™ is ideal for driving home wooden fence posts. The large round striking face makes it much easier and safer than using a sledge hammer. It has a cast head with double round striking faces. The solid core, high density fibreglass handle is fitted with a polypropylene jacket for shock absorbency. The treble injected TPE soft-grip handle provides added comfort. The handle is fixed by threading through the head and hence offering an extremely strong and permanent fixing.
The Roughneck Auger Type Posthole Digger is made from heavy gauge metal for extra strength and has a long, tubular T-handle for easy application. Ideal for digging and scooping out a hole of 150mm (6in) diameter. Its hardened blade will cut through most soils and clays.
The Roughneck Double Ended Nail Puller is manufactured from drop-forged alloy steel, hardened and tempered with a hexagonal shank. With a black painted finish and an integral nail puller to aid the removal of embedded nails.
This Roughneck Pinch Point Crowbar has a drop forged steel construction with heat treated working areas, and a black finish with polished tips. They have a pinch point for easier penetration, lifting, digging, breaking, wrecking etc.
The Roughneck Ground Breaking Bar is ideal for use in locations and jobs where a normal crowbar is not sufficient or a pick not accurate enough. This heavy-duty bar is made up of an inner solid crowbar with a chisel tip, drop forged, heat treated and hardened. A weight slides up and down the central bar and exerts blows on the target material. It is ideal for breaking up hard ground, rocks, concrete slabs, asphalt etc. For extra impact, the end stopper can be removed to allow the weight to drop from a greater height.
3 piece Cold Chisel set is a top quality set made from chrome vanadium steel for increased strength and durability. For cutting and shaping wrought iron, cast iron, steel, brass, bronze, copper and aluminium and for cutting bolts, nuts and rivets. Contains 1 of each: 140 x 10mm (5.1/2 x 3/8in), 150 x 13mm (6 x 1/2in) and 170 x 16mm (6.3/4 x 5/8in).
