The Faithfull Posthole Auger provides an easy non-mechanical means of creating holes when erecting fencing posts. When rotated in a clockwise direction the 150mm diameter thread bores a hole into the soil or clay, with an optional hole depth to suit the length of the post to be secured.
The Faithfull Floor Scraper is used for removing grease and dirt from workshop floors, preparation areas and shopping arcades etc. The steel blade is designed not to damage tiled flooring or laminates and is fitted with fibreglass handles for strength and easy sterilisation.Fibreglass handle: 1450 x 25mm (57 x 1 in) Blade size: 200mm (8in)
Faithfull heavy-duty crowbars, manufactured from high-grade heat-treated steel bar. Ideal for levering heavy objects, wrecking work and digging, the pinch point end allows easy penetration when breaking hard ground.1 x Faithfull Chisel & Point Crowbar 25mm x 1.2m
This Faithfull Paint Mixing Paddle has a 8mm hexagon shank for use in power drills of at least 400 watt and above. It is perfectly balanced and is quiet in operation. Mixes between 1-5 litres of paint. The overall length of 400mm with a 60mm diameter paddle allow access to most modern paint containers. Length: 400mm. Diameter: 60mm.
The Faithfull Adjustable Support Props are designed for use as an extra pair of hands when supporting ceiling boards and sheet materials during overhead fixing. They are adjustable to working heights ranging from 1.6m (63in) to 2.9m (114in). The feet at both ends swivel to accommodate sloping or uneven surfaces and improve grip. PLEASE NOTE that these props are for lightweight temporary support only and MUST NOT be confused with heavyweight equivalents which are designed to support heavy loads over extended periods. Maximum working load 60Kg (132lb) Vertical Maximum working load 20Kg (44lb) at 45deg Supplied with sturdy carry bag
The Faithfull Tough-Tarp Tarpaulin is 100% waterproof, frost and UV resistant. Integrally bonded with water repellent and UV resistant materials (not sprayed on as a secondary treatment), and manufactured with polyethylene film, using patented multi-layered, cross-laminated production technology. Puncture and tear resistant, in the unlikely case of damage, it will remain localised and not spread across the tarpaulin, making any damage easy to repair without needing to replace the tarpaulin.Made to withstand temperatures between -60 to & 60 degrees, the material will not crack or flake even at such extremes. Plus, the benefit of zero-fade technology ensures these tarpaulins stay functional and looking good for longer. Featuring ultrasonically welded eyelets, which are reinforced by rust resistant aluminium inserts and heat-sealed hems, ensuring the eyelets remain in place - even when placed under the highest pressure/tension.The lightest and strongest tarpaulins available in our range and backed by a five year guarantee, however these have been proven to last much longer. They will outlast normal, woven tarpaulins, by up to 3 times. Tested and fully REACH (Registration, Evaluation, Authorisation and Restriction of Chemicals) compliant, plus they’re 100% recyclable.The Faithfull Tough-Tarp Tarpaulin, in White, is 6 x 4m in dimension. is 100% waterproof, frost and UV resistant. The tarpaulin is integrally bonded with water repellent and UV resistant materials (not sprayed on as a secondary treatment), and manufactured with polyethylene film, using patented multi-layered, cross-laminated production technology.Puncture and tear resistant, in the unlikely case of damage, it will remain localised and not spread across the tarpaulin, making any damage easy to repair without needing to replace the tarpaulin.Made to withstand temperatures between -60 to & 60 degrees, the material will not crack or flake even at such extremes. Plus, the benefit of zero-fade technology ensures these tarpaulins stay functional and looking good for longer.Featuring ultrasonically welded eyelets, which are reinforced by rust resistant aluminium inserts and heat-sealed hems, ensuring the eyelets remain in place - even when placed under the highest pressure/tension. Tested and fully REACH (Registration, Evaluation, Authorisation and Restriction of Chemicals) compliant, plus they’re 100% recyclable. Specifications: Size: 6 x 4m.Colour: White.
Heavy section aluminium darbies are used for preparatory surface finishing of walls. They have a 16mm lipped edge and a rigid back support. With adjustable handles for enhanced user comfort and control.Length: 1200mm (4 ft)Section: 120 x 16 mm (4 3/4 x 5/8 in) Lip.
These Faithfull Scutch combs fit into a scutch comb holder when preparing stone and masonry etc. The size of the scutch comb must be the same width as the comb holder being used. All Faithfull scutch combs are manufactured from high-quality chrome vanadium steel. Can also be used in scutch hammers.The Faithfull FAISC1N Scutch combs come in a pack of 5 and have the following dimensions:Size: 25mm (1 inch).
Flex Tubs are ideal for use around the garden, home, on the building site, farm or stables. This lightweight, heavy-duty polyethylene, flexible tub features super-strong comfortable handles and is ideal for solids and fluids.Environmentally friendly Flex Tubs are manufactured from 100% recyclable material.Colour: BlackSize: 28 Litre (6 gal)
The Faithfull Tapered Fencing Spade is made from carbon manganese steel for added strength. The tubular steel shaft is welded to the socket to create a strong joint. The long handle makes it ideal for digging postholes. The shovel features high quality welds, with no open points to allow water to enter causing internal rust and a solid forged blade correctly tempered for a long working life.
The Faithfull is a professional quality plasterers tape for covering plasterboard joints and repairing cracks prior to plastering. Length: 90 metres (295ft).Width: 50mm (2in).
This Hultafors B 1500 Aluminium Pry Bar 1500mm 2.8kg is lighter and easier to work with, especially when working at shoulder height. Used for applications such as prizing items onto truck platforms and ripping up formwork. An aluminium tool does not rust, has better resistance to cold and is also more flexible than steel tools. It can be bent about three times as much as a steel tool without being deformed.
The Hultafors F430 Wrecking Bar is manufactured from aluminium with a cone-shaped point. Used when aligning flanges with bolt holes and for bending copper pipes with care. The bar is inserted in the pipe which is then heated up and bent to shape. This prevents damage to the actual pipe end. Very common when fitting car body components. Aluminium is easier and more comfortable to work with, does not rust and can handle the cold better.
Brick bolster made from drop-forged steel, heat-treated and tempered.With black powder-coated finish.The Roughneck ROU31992 Brick Bolster & Grip 102mm x 216mm (4in x 8.1/2in) 22mm Shank
The Hultafors 207 Steel Pinch Bar is made from 6-square high quality steel. It has a wide and thin chisel make it easy to use in narrow spaces. The long and cone shaped tip can be used for aligning flanges with bolt holes and the cone tip facilitates the installation of O-rings. The cone shaped tip is long and evenly grinded and both ends are unpainted to avoid discolouration.1 x Hultafors 207 Steel Pinch Bar 500mm (20in)
The Faithfull combined feather edge and straight edge is made from extruded mill finished aluminium which is exceptionally light and manoeuvrable. Manufactured with one edge tapered and one flat edge. It can also be used as a straight edge for ruling and cutting. The models featuring the scale along the length are graduated in metric at 5 mm intervals and numbered every 50 mm. The ‘FE6FE’ has one edge sharply tapered and one flat edge.This models features a metric scale along the length graduated at 5mm intervals and numbered every 50 mm. Size 1800mm (6 ft)Section: 93 x 25mm (3 5/8 x 1 in)
The Faithfull drywall taping knives are used for spreading jointing compound and when applying paper or fibreglass drywall tape, to cover joints in plasterboard. The knives feature a soft grip handle with a thumb rest and a flexible Blue Steel tapered shaped blade to assist when running in corners. Other common uses include applying covering over nail and screw indents, patching holes, and smoothing wall-coverings. Available in two widths of 200 or 300mm.The DWTAPE300 is 300mm wide
The scaffold key is used for aligning and tightening scaffold eye bolts. It has a hook at one end and a hardened tempered taper square at the other. Length: 300mm.
The Roughneck Utility Bars are manufactured from stamped alloy steel that has been hardened and tempered. They have a painted and powder coated finish with polished tips and an integral nail puller to remove embedded nails.1 x Roughneck Mini Utility Bar 175mm (7in)
Flex Tubs are ideal for use around the garden, home, on the building site, farm or stables. This lightweight, heavy-duty polyethylene, flexible tub features super-strong comfortable handles and is ideal for solids and fluids.Environmentally friendly Flex Tubs are manufactured from 100% recyclable material.Colour: YellowSize: 15 Litre (3 gal)
The Roughneck Heavy-Duty Pull Bar is a very well designed and strong tool it has a large flange to rest against the panel and a striking face protected by a nylon cap. Underneath is fully covered by soft felt to protect wood surfaces from scratches, scuffs or other damage. Bevelled end tip to allow prying for either lifting panels or pulling the last row tighter together.
These Roughneck Traditional Wrecking Bars are made from drop-forged alloy steel, hardened and tempered steel and with polished tips and hexagonal shank.1 x Roughneck Wrecking Bar 450mm (18in)
The Bulldog Wrecking Bar is perfect for levering up roofing timbers, floor tiles and slabs. Manufactured from one piece of solid steel with a hexagonal shaft for strength. Epoxy coated for rust resistant as well as further increasing the strength and quality of the tool. There is also a nail slot for nail removal.
The Faithfull Builder's Spazzle, also known as a Lute, is a lightweight landscaping tool ideal for levelling tarmac, concrete and loose materials such as soil and gravel. The strong but lightweight 600mm wide head is made from extruded aluminium and fitted to a 1.67m FSC® European ash wood handle. The wide head delivers faster smoothing of new asphalt to cover potholes when preparing for compacting with a tamper, roller or plate compactor and is perfect for pulling hot asphalt mix out evenly over the ground. Ideal for use by professional ground workers. Specification:Head Size: 605 x 95mmHandle Size: 1670 x 24.5mm
The Roughneck 64-961 5 Piece Bar Set contains the following; 2 x Utility Bars manufactured from stamped alloy steel that has been hardened and tempered. They have a painted and powder-coated finish with polished tips and an integral nail puller to remove embedded nails. Sizes: 1 x 175mm (7in) and 1 x 380mm (15in). 2 x Wrecking Bars made from drop-forged alloy steel, hardened and tempered, with polished tips and hexagonal shank. The 380mm (15in) bar has an upgraded 5/8in diameter. Sizes: 1 x 300mm (12in) and 1 x 380mm (15in). 1 x Gorilla Bar Junior with a low profile claw that fits further under the workpiece for increased prying power. The wider claw surface offers better control and resists sinking into the support surface. Made from drop-forged alloy steel, hardened and tempered, with polished tips and oval shaped for better control and strength. Size: 356mm (14in).
The Faithfull combined feather edge and straight edge is made from extruded mill finished aluminium which is exceptionally light and manoeuvrable. Manufactured with one edge tapered and one flat edge. It can also be used as a straight edge for ruling and cutting. The models featuring the scale along the length are graduated in metric at 5 mm intervals and numbered every 50 mm. The ‘FE6FE’ has one edge sharply tapered and one flat edge.Size 1200mm (4 ft)Section: 93 x 25mm (3 5/8 x 1 in)
The Stanley 200mm (8in) Stainless Steel Taping Knife has a bi-material handle for comfort and protection. Its stainless steel blade prevents rust and provides durability. The blade has been tapered from handle to tip provides flexibility. With a smooth zinc alloy cap for durability and hang hole in handle for easy storage.200mm (8in) Stainless Steel blade
The Roughneck Demolition & Lifting Bar increases safety, reducing the chance of injury. Ideal for lifting floorboards, removing ceiling boards, breaking pallets, removing roofing laths, lifting heavy objects and all types of demolition work. Also for lifting up large items (e.g slabs) with less risk of items dropping when prising up. The tusks are hardened and tempered and the heel rounded to distribute pressure over a larger area.
Large slate guillotine which cuts up to 12mm (1/2in) thick natural slates in one easy action. Suitable for cutting natural slate only. Overall length: 840mm (33in).Weight: 8.1kg (18lb).
Bulldog's Standard range of tools are designed with the usual attention to detail and strength, but lower in price than other ranges. This square mouth open socket shovel has a steel blade (size 2). It is light in weight, which makes it ideal for shovelling sand and aggregates. Its shaft is made from unlacquered American and German FSC ash wood and it has a T style handle. Forged in Britain. The BUL2SM2T has the following specifications: Size: No.2.Blade: 315 x 250mm (12.1/2 x 10in).Handle length: 711mm (28in).
The Faithfull FAIPROEXTB9 pair of spare bolts are used as part of an external building profile. They are made from galvanised steel and are 230mm (9in) in size.
For use in both domestic and industrial environments for removing grease, dirt and other remains that stick to tiled, concrete and laminate flooring. It has a double dip, washable, soft-grip fibreglass handle for maximum durability and strength. The stainless steel blade remains sharper for longer and will not rust.Blade: 200mm (8 in).
The Faithfull Round Fencing Tamper has an all steel construction with a small, round head. Suitable for fencing applications where access to a confined space is needed. It is ideal for use when compacting cement or earth around fence posts.
Roughneck 3 Piece Chisel and Bolster Set made from drop-forged steel, heat-treated and tempered. Each piece has a black powder-coated finish and a dual-component soft grip with safety guard. Set contains: 1 x Cold Chisel 25 x 254mm (1 x 10in)1 x Brick Bolster 70 x 216mm (2.3/4 x 8.1/2in)1 x Electrician's Bolster 76 x 254mm (3 x 10in)
