Roughneck Square shovel with D handle and is 36 inches long, the pressed steel blade is fully hardened to provide fast and long lasting work. Strong fibreglass handle. Tread on the blade helps increase grip and load pressure.
The Marshalltown EzyScreed™ Level is made from lightweight aluminium, with a dual-edge design. The sharp edge of the blade can be used for cutting concrete while the rounded edge can be used for floating. As well as screeding concrete this tool can also be used as a check rod or float. The handle has a built-in level for checking your work. Attach the handle to the bottom side of the screed for double the life.1 x Marshalltown EzyScreed™ Level 1.2m (4ft)
The Fiskars Solid™ Metal Shovel with a wide scoop for moving dirt, sand, gravel and other bulky materials. Its steel head is welded to a strong metal shaft for added durability. Fitted with a D-shaped handle fitting all hand sizes, with or without gloves. Fiskars Solid™ tools are effective, easy-to-use and offer affordable quality to get the job done.
Gorilla Tubs are flexible, which is the key to the millions of jobs they can perform. They are great for mixing small batches of plaster and mortar; if the mix dries, a few kicks to the flexible body will remove the muck easily. They can be carried with both handles in one hand, shaped for pouring, pressed flat to the floor for scooping, pushed flat against a wall for scraping wallpaper into, catching leaks and so on. Gorilla Tubs are extremely durable and long lasting. The handles have been EU tested and have a working weight of 100 kilos (220 lb), so really heavy loads can be carried between two people. Gorilla Tubs can be used as tool bags, water tubs, rubble removers, roofing, scaffold knuckles, collecting bits, broken glass carrier etc. Features:Infinitely Versatile.Super Flexible.Frost proof.UV Sunlight Proof.Handles CE Tested.Reinforced in key areas for durability.Ribbed profile for strength.The GORTUB75 Gorilla Tub Large Size 75 Litre (16 gal) has the following specification: Height: 37cm.Diameter: 57cm.Colour: Yellow.
The Faithfull Digging Bar is manufactured from high-grade heat-treated steel bar, digging bars have a hexagonal profile shank with a pencil point at one end, and a 50mm (2in) flat chisel edge at the other. Used for breaking rock or concrete and for levering heavy objects.1 x Faithfull Digging Bar 6.4kg 25mm x 1.5m
The screeding level is primarily designed for levelling out when laying fluid flooring materials, but it can also be used for laying patios and checking vertical edges.Manufactured from a quality aluminium rectangular profile, the level features sturdy plastic end caps, two handholds, and three vials (one horizontal, one vertical and one angled at 45°).
Roughneck Micro Shovel Round Point is ideal for use in confined spaces such as the bottom of trenches or shovelling bagged materials. Ideal for keeping in the car for snow or off road emergencies. The 14 gauge blade is manufactured from industrial strength steel. Lightweight fibreglass handle with ergonomic polypropylene YD grip. Power rings provide stronger blade to handle connection. Overall length: 685mm (27in).
These Roughneck Traditional Wrecking Bars are made from drop-forged alloy steel, hardened and tempered steel and with polished tips and hexagonal shank.1 x Roughneck Wrecking Bar 914mm (36in)
The Marshalltown Lightweight Flooring Shear has a lightweight, compact design that allows you to cut where you work without dust, noise, or electricity. Unique features include a movable aluminium fence for precise, repeatable 45 degree cuts, and an integrated handle for easy, single hand carrying. It is the essential tool for your next vinyl, laminate, or engineered wood flooring installation. Proudly made in the USA with Global Materials. Specification: Max. Cutting Width: 330mm (13in)Max. Cutting Thickness: 12mmJanka Hardness: 1,200Weight: 6kg
The Hultafors 109 Series Wrecking Bars are manufactured from hardened, high-alloy boron steel and have wide, ground contact surfaces and thin ends making them easy to use in narrow spaces and reducing the risk of leaving marks. The claw is optimised for pulling out nails.1 x Hultafors 109/36 Steel Wrecking Bar 900mm (36in)
Wrecking bars are an essential tool for all builders, carpenters and plumbers and widely used in factories, warehouses and the farming industry. Manufactured from octagonal steel cross section with hardened and tempered chisel and claw ends, which ensure maximum strength and durability. For opening packing cases, pulling out nails, levering off shuttering etc.Size: 900 x 19mm (36 x 3/4 in).
Can be used as a wrecking bar, nail puller and utility or ripping bar. The low profile wide, flattened claw fits further under the workpiece for increased prying power and it resists sinking into the support surface. Forged from high quality carbon steel.1 x Faithfull Tuff Bar 900mm (36in)
The Faithfull Round Mouth Shovel made from manganese steel for strength, and epoxy coated for rust prevention. The solid forged blade and socket are correctly tempered for strength and a tubular shaft is welded to the socket for a strong smooth join. Fitted with an MYD hilt with a wooden cross dowel for added comfort. Size: No.2. Specifications:Manufactured to BS3388: 2004.Tested to Rockwell hardness 42.50HRC.Load tested to 75KG.
The Faithfull Floor Scraper is used for removing grease and dirt from workshop floors, preparation areas and shopping arcades etc. The steel blade is designed not to damage tiled flooring or laminates and is fitted with fibreglass handles for strength and easy sterilisation.Fibreglass handle: 1450 x 25mm (57in x 1 in) Blade size: 300mm (12in)
The Faithfull combined feather edge and straight edge is made from extruded mill finished aluminium which is exceptionally light and manoeuvrable. Manufactured with one edge tapered and one flat edge. It can also be used as a straight edge for ruling and cutting. The models featuring the scale along the length are graduated in metric at 5 mm intervals and numbered every 50 mm. The ‘FE6FE’ has one edge sharply tapered and one flat edge.Size 3000mm (10 ft)Section: 93 x 25mm (3 5/8 x 1 in)
The Faithfull FAIPROEXTB18 pair of spare bolts are used as part of an external building profile. They are made from galvanised steel and 460mm (18in) in size.
This Faithfull Digging Bar is manufactured from high-grade heat-treated steel bar with one diamond point and one bent chisel point (2in). The bent chisel, or slate bar can be used for breaking rocks or as a lever for moving heavy objects.
The Faithfull all steel taper mouth shovel. Solid manganese steel forged blade and socket correctly tempered for strength. Powder coated for rust prevention. A tubular shaft is welded to the socket for a strong smooth join. The shaft is fitted with a metal YD hilt with a wooden cross dowel for added comfort. Specification: Size: No.2Blade: 300 x 240-215mm (12 x 9.1/2-8.1/2in)Shaft: 700mm (28in)
Edma Straight Vario Laminate / MDF Guillotine is perfect for straight cuts, in length and angled cuts, up to 90° in laminate flooring. It leaves a neat cut without damaging the laminate layer. It doesn't require re sharpening, no noise and no breathable dust is left behind. Comes with protective felt pads, 1 mini trestle for long boards, 1 waste collector, and removable board stopper for 210 mm cut. Maximum Cut: Straight: 320mm, Angled: 210mm.Maximum Thickness: 15mm.Weight: 12.45kg.
Wrecking bars are an essential tool for all builders, carpenters and plumbers and widely used in factories, warehouses and the farming industry. Manufactured from octagonal steel cross section with hardened and tempered chisel and claw ends, which ensure maximum strength and durability. For opening packing cases, pulling out nails, levering off shuttering etc.Size: 450 x 16mm (18 x 5/8 in).
For trimming roof slates to size. The slate cutting axe blade incorporates a spike for creating nail holes, and the handle is covered with a rubber grip for comfort. Available in R/H or L/H styles.The handle is offset for left hand use.
A heavy-duty, All-steel Square Mouth Contractor's Shovel. Solid forged blade and socket correctly tempered for strength. It has a metal YD handle with wooden cross piece. Size: No.2. Blade: 310 x 250mm (12 x 10in).
10 x 1m cable accessory kit which is ideal for gaining access to wire and cable under floorboards, in ceiling ducts and in wall cavities.Contents:10 x 1m reinforced polyester rods.Flexy extender.Ring end for pushing.Hook end for pulling.
Faithfull Cold chisels are made from high-quality grade steel which is hardened and ground to maximise safety and to ensure longer lasting cutting edges. For cutting brick, concrete and paving slabs . The cutting edge has an angle of approximately 60°.Size: 150 x 6mm (6 x 1/4 in).
Faithfull Cold chisels are made from high-quality grade steel which is hardened and ground to maximise safety and to ensure longer lasting cutting edges. For cutting brick, concrete and paving slabs . The cutting edge has an angle of approximately 60°.Size: 150 x 13mm (6 x 1/2 in).
These Faithfull Scutch combs fit into a scutch comb holder when preparing stone and masonry etc. The size of the scutch comb must be the same width as the comb holder being used. All Faithfull scutch combs are manufactured from high-quality chrome vanadium steel. Can also be used in scutch hammers.The Faithfull FAISC112N Scutch combs come in a pack of 5 and have the following dimensions:Size: 38mm (1 1/2 inch).
