Bolts & Nuts

332 products


  • Last stock! Forgefix Roofing Bolt Zp M6 X 30Mm Bag 25

    Forgefix Forgefix Roofing Bolt Zp M6 X 30Mm Bag 25

    5 in stock

    These Forgefix double slotted roofing bolts are supplied with square nuts and have a low profile mushroom head. Their bright zinc plated finish increases resistance to corrosion. The bolts are therefore suitable for both interior and exterior use, and can be exposed to weather conditions without the risk of rusting. APPLICATION:Used in many applications other than roofing, when joining products together.Use clearance drill sizes 1mm larger than bolt diameter. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminium and stainless steels by their oxide layers. With slotted screwdrivers it is important to ensure that the tip matches the width of the screw slot, otherwise you run the risk of damaging the screw head. Slotted screwdrivers are available with either Flared or Parallel tips. For the majority of uses the Flared tip is ideal but if the screw/bolt needs to be driven below the material surface a Parallel tip screwdriver should be used.Roofing Bolt ZP M6 x 30 Bag 25

    5 in stock

    £5.49

  • Metalmate Type A Washer Bright ZP 16mm (Box 100)

    Metalmate Metalmate Type A Washer Bright ZP 16mm (Box 100)

    20 in stock

    These METALMATE® Type A Washers have the following specification: Size: 16mmFinish: Bright Zinc PlatedBox Quantity: 100

    20 in stock

    £9.99

  • Last stock! Metalmate Type P Nylon Insert Nut ZP M4 (Box 1000)

    Metalmate Metalmate Type P Nylon Insert Nut ZP M4 (Box 1000)

    2 in stock

    These METALMATE® Type P Nylon Insert Nuts have the following specification: Size: M4Finish: Zinc PlatedClass: 8 SteelBox Quantity: 1,000

    2 in stock

    £16.99

  • Last stock! Metalmate Type T Nylon Insert Nut ZP M4 (Box 1000)

    Metalmate Metalmate Type T Nylon Insert Nut ZP M4 (Box 1000)

    5 in stock

    These METALMATE® Type T Nylon Insert Nuts have the following specification: Size: M4Finish: Zinc PlatedClass: 6 SteelBox Quantity: 1000

    5 in stock

    £12.99

  • Metalmate Repair Washer ZP 10mm x 38 x 1.50 (Box 100)

    Metalmate Metalmate Repair Washer ZP 10mm x 38 x 1.50 (Box 100)

    20 in stock

    These METALMATE® Repair Washers have the following specification: Size: 10mm x 38 x 1.50Finish: Zinc PlatedBox Quantity: 100

    20 in stock

    £10.49

  • Last stock! Metalmate High Tensile Set Screw ZP M12 x 40mm (Box 100)

    Metalmate Metalmate High Tensile Set Screw ZP M12 x 40mm (Box 100)

    5 in stock

    These METALMATE® High Tensile Set Screws have the following specification: Size: M12 x 40mmFinish: Zinc PlatedGrade: 8.8 SteelBox Quantity: 100

    5 in stock

    £24.99

  • Last stock! Metalmate Hexagon Full Nut ZP M20 (Box 50)

    Metalmate Metalmate Hexagon Full Nut ZP M20 (Box 50)

    2 in stock

    These METALMATE® Hexagon Full Nuts have the following specification: Size: M20Finish: Zinc PlatedClass: 8 SteelBox Quantity: 50

    2 in stock

    £29.49

  • Last stock! Metalmate Hexagon Full Nut ZP M5 (Box 1000)

    Metalmate Metalmate Hexagon Full Nut ZP M5 (Box 1000)

    5 in stock

    These METALMATE® Hexagon Full Nuts have the following specification: Size: M5Finish: Zinc PlatedClass: 8 SteelBox Quantity: 1,000

    5 in stock

    £11.49

  • Last stock! Metalmate Type T Nylon Insert Nut ZP M8 (Box 200)

    Metalmate Metalmate Type T Nylon Insert Nut ZP M8 (Box 200)

    3 in stock

    These METALMATE® Type T Nylon Insert Nuts have the following specification: Size: M8Finish: Zinc PlatedClass: 6 SteelBox Quantity: 200

    3 in stock

    £9.99

  • Metalmate Type A Washer Bright ZP 14mm (Box 100)

    Metalmate Metalmate Type A Washer Bright ZP 14mm (Box 100)

    15 in stock

    These METALMATE® Type A Washers have the following specification: Size: 14mmFinish: Bright Zinc PlatedBox Quantity: 100

    15 in stock

    £8.99

  • Last stock! Metalmate High Tensile Set Screw ZP M6 x 10mm (Box 500)

    Metalmate Metalmate High Tensile Set Screw ZP M6 x 10mm (Box 500)

    4 in stock

    These METALMATE® High Tensile Set Screws have the following specification: Size: M6 x 10mmFinish: Zinc PlatedGrade: 8.8 SteelBox Quantity: 500

    4 in stock

    £14.49

  • Last stock! Forgefix Roofing Bolt Zp M5 X 12Mm Bag 25

    Forgefix Forgefix Roofing Bolt Zp M5 X 12Mm Bag 25

    5 in stock

    These Forgefix double slotted roofing bolts are supplied with square nuts and have a low profile mushroom head. Their bright zinc plated finish increases resistance to corrosion. The bolts are therefore suitable for both interior and exterior use, and can be exposed to weather conditions without the risk of rusting. APPLICATION:Used in many applications other than roofing, when joining products together.Use clearance drill sizes 1mm larger than bolt diameter. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminium and stainless steels by their oxide layers. With slotted screwdrivers it is important to ensure that the tip matches the width of the screw slot, otherwise you run the risk of damaging the screw head. Slotted screwdrivers are available with either Flared or Parallel tips. For the majority of uses the Flared tip is ideal but if the screw/bolt needs to be driven below the material surface a Parallel tip screwdriver should be used.Roofing Bolt Zinc Plated M5 x 12 Bag 25

    5 in stock

    £3.99

  • Forgefix Carriage Bolt & Nut Zp M10 X 160Mm Bag 10

    Forgefix Forgefix Carriage Bolt & Nut Zp M10 X 160Mm Bag 10

    These Forgefix Carriage Bolts are Zinc Plated, and ideal for timber to timber joining. They come complete with a hex nut and are fully threaded to 100mm. Also known as 'Cup Square Hex Bolts', the square underneath the Cup stops rotation of the bolt when tightening. Conform to DIN 603 and DIN 934 standards. Available in a comprehensive range of sizes to suit most applications. APPLICATIONUsed mainly for fastening timber to timber and is extensively used for timber joist construction in house building and numerous decking applications. A Carriage Bolt, also known as a Coach Bolt or as a ‘Fully Threaded Cup Square Hex Bolt’, has a domed or countersunk head, and the shank is topped by a short square section under the head. The square section grips into the part being fixed (typically wood), preventing the bolt from turning when the nut is tightened. A rib neck Carriage Bolt has several longitudinal ribs instead of the square section, to grip into a metal part being fixed. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminium and stainless steels by their oxide layers.Carriage Bolt & Nut ZP M10 x 160 Bag 10

    £9.49

  • Last stock! Metalmate High Tensile Set Screw ZP M14 x 100mm (Box 25)

    Metalmate Metalmate High Tensile Set Screw ZP M14 x 100mm (Box 25)

    3 in stock

    These METALMATE® High Tensile Set Screws have the following specification: Size: M14 x 100mmFinish: Zinc PlatedGrade: 8.8 SteelBox Quantity: 25

    3 in stock

    £18.99

  • Last stock! Metalmate High Tensile Set Screw ZP M12 x 70mm (Box 50)

    Metalmate Metalmate High Tensile Set Screw ZP M12 x 70mm (Box 50)

    5 in stock

    These METALMATE® High Tensile Set Screws have the following specification: Size: M12 x 70mmFinish: Zinc PlatedGrade: 8.8 SteelBox Quantity: 50

    5 in stock

    £19.49

  • Last stock! Metalmate Type A Washer Bright ZP 5mm (Box 1000)

    Metalmate Metalmate Type A Washer Bright ZP 5mm (Box 1000)

    5 in stock

    These METALMATE® Type A Washers have the following specification: Size: 5mmFinish: Bright Zinc PlatedBox Quantity: 1,000

    5 in stock

    £9.49

  • Last stock! Forgefix Spring Washers Zp M10 Bag 100

    Forgefix Forgefix Spring Washers Zp M10 Bag 100

    3 in stock

    These Forgefix Spring Lock Washers ring-shaped, split at one point and bent into a helix. This shape means that the washer exerts a spring force between the fastener's head and the base item. The main purpose of the Spring Washer is to prevent loosening of the fastener by either movement or vibration.These washers are bright zinc plated for increased corrosion resistance. APPLICATIONIdeal for all manner of bolting applications where movement or vibration may cause loosening. Typical examples would be engineering and machinery.Can be used with all types of bolts and nuts. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminum and stainless steels by their oxide layers.Spring Washers ZP M10 Bag 100

    3 in stock

    £4.99

  • Last stock! Metalmate High Tensile Set Screw ZP M12 x 55mm (Box 50)

    Metalmate Metalmate High Tensile Set Screw ZP M12 x 55mm (Box 50)

    1 in stock

    These METALMATE® High Tensile Set Screws have the following specification: Size: M12 x 55mmFinish: Zinc PlatedGrade: 8.8 SteelBox Quantity: 50

    1 in stock

    £16.49

  • Metalmate Repair Washer ZP 10mm x 30 x 1.50 (Box 100)

    Metalmate Metalmate Repair Washer ZP 10mm x 30 x 1.50 (Box 100)

    20 in stock

    These METALMATE® Repair Washers have the following specification: Size: 10mm x 30 x 1.50Finish: Zinc PlatedBox Quantity: 100

    20 in stock

    £7.99

  • Last stock! Forgefix Techfast Bonded Epdm Washer 6.3 X 19Mm Box 100

    Forgefix Forgefix Techfast Bonded Epdm Washer 6.3 X 19Mm Box 100

    3 in stock

    Forgefix TechFast Bonded EPDM Washers provide a watertight seal. They offer protection against the weather, especially where moisture and condensation are a factor. The washer seals the hole created in the material being fixed and reduces the chance of corrosion. They are fire and corrosion resistant, protected by Elementech corrosion resistant coating, salt spray tested to 1000 hours. Comply with EU Safety, Health and Environmental requirements.These Forgefix TechFast Bonded EPDM Washers have the following specification: Size: 6.3 x 19mm

    3 in stock

    £7.49

  • Forgefix Roofing Bolt Zp M6 X 12Mm Bag 25

    Forgefix Forgefix Roofing Bolt Zp M6 X 12Mm Bag 25

    20 in stock

    These Forgefix double slotted roofing bolts are supplied with square nuts and have a low profile mushroom head. Their bright zinc plated finish increases resistance to corrosion. The bolts are therefore suitable for both interior and exterior use, and can be exposed to weather conditions without the risk of rusting. APPLICATION:Used in many applications other than roofing, when joining products together.Use clearance drill sizes 1mm larger than bolt diameter. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminium and stainless steels by their oxide layers. With slotted screwdrivers it is important to ensure that the tip matches the width of the screw slot, otherwise you run the risk of damaging the screw head. Slotted screwdrivers are available with either Flared or Parallel tips. For the majority of uses the Flared tip is ideal but if the screw/bolt needs to be driven below the material surface a Parallel tip screwdriver should be used.Roofing Bolt ZP M6 x 12 Bag 25

    20 in stock

    £4.49

  • Last stock! Metalmate High Tensile Set Screw ZP M16 x 100mm (Box 25)

    Metalmate Metalmate High Tensile Set Screw ZP M16 x 100mm (Box 25)

    5 in stock

    These METALMATE® High Tensile Set Screws have the following specification: Size: M16 x 100mmFinish: Zinc PlatedGrade: 8.8 SteelBox Quantity: 25

    5 in stock

    £22.99

  • Last stock! Forgefix Flat Mudguard Washers Zp M6 X 50Mm Bag 10

    Forgefix Forgefix Flat Mudguard Washers Zp M6 X 50Mm Bag 10

    5 in stock

    These Forgefix Flat Mudguard Washers have a large 50mm outside diameter. They are bright Zinc Plated for increased corrosion resistance. Washers provide a smooth surface for the nut or bolt to bear on, making it less likely to loosen as a result of an uneven fastening surface. The main purpose of a washer is to distribute the load under a bolt head or the nut face. APPLICATION:On all manner of bolting applications. Can be used with all types of bolts and nuts. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminum and stainless steels by their oxide layers.Flat Mudguard Washers ZP M6 x 50 Bag 10

    5 in stock

    £4.49

  • Metalmate High Tensile Set Screw ZP M10 x 100mm (Box 50)

    Metalmate Metalmate High Tensile Set Screw ZP M10 x 100mm (Box 50)

    15 in stock

    These METALMATE® High Tensile Set Screws have the following specification: Size: M10 x 100mmFinish: Zinc PlatedGrade: 8.8 SteelBox Quantity: 50

    15 in stock

    £17.99

Login

Forgot your password?

Don't have an account yet?
Create account