These Irwin Wood Jigsaw Blades are made from Carbon steel for use in softer materials such as wood, laminated chipboard, and plastics. They have 3 Sided, fleam ground teeth for fast cut and clean finishes in all wood applications. T Shank for AEG, Bosch, DEWALT and Hitachi Jigsaws. These Irwin 10504223 (T101BR) Wood Jigsaw Blades provide straight, fine down cuts in plywood, laminated particleboard, hard and soft wood, plastics 4-30mm.
The DEWALT Series 60 Extreme Circular Saw Blade with laser cut expansion slots that help to reduce vibration and noise. The extra large sub micro grain carbide teeth remain sharper for much longer and can be resharpened up to 20 times. This stationary circular saw blade range can be used for cutting in natural wood, plywood, laminates, particleboard and MDF. Ideal for both table and mitre saws.The DEWALT DT410 Series 60 Circular Saw Blade has the following specification: Finish: Fast Rip.Blade Diameter: 216mm.Bore Size: 30mm.Tooth Count: 24.Plate Thickness: 1.8mm.Kerf Thickness: 2.6mm.Grind: ATBN.Rake Angle: -5°.
Cuts all metals including non ferrous, pipe conduit, stainless and sheet metal. Suitable for use with materials 1.5 to 10mm (1/16 inch to 3/8 inch) thick, dependent on the TPI of the blade. These blades have the following specification:Blade Type: Metal Cutting, 818R, 200mm x 18tpi. The Irwin IRW10504156 Sabre saw 818R metal cutting blades (200mm) comes in a pack of 5 with 18TPI.
The Irwin Construction Circular Saw Blade with expansion slots which dissipate heat and prevent warping. Its construction grade tungsten carbide tips retain their edge, and the plate is fully hardened for durability. The blade features alternate top bevel tooth grind (ATB) for cross cutting and ripping in all woods. Its corrosion resistant coating provides longer quality performance. Suitable for use with handheld corded machines.This IRWIN Construction Circular Saw Blade has the following specification: Blade Diameter: 184mm.Bore: 30mm.Teeth: 40.Kerf Thickness: 2.5mm.Tooth Config: ATB.
These Irwin Wood Jigsaw Blades are made from Carbon steel for use in softer materials such as wood, laminated chipboard, and plastics. They have 3 Sided, fleam ground teeth for fast cut and clean finishes in all wood applications. T Shank for AEG, Bosch, DEWALT and Hitachi Jigsaws. These Irwin 10504224 (T244D) Wood Jigsaw Blades provide very fast clean cuts in hard and soft wood, particleboard 6-60mm.
Irwin Multi Material Circular Saw Blade with construction grade tungsten carbide tips which retain their edge for longer and can be resharpened. Fully hardened plate with expansion slots help to dissipate heat and prevent warping. With Triple Chip Grind teeth (TCG) for an excellent cutting finish and a corrosion resistant coating for longer quality performance.This IRWIN Multi Material Circular Saw Blade has the following specifications: Blade Diameter: 160mm.Bore: 20mm.Teeth: 48.Kerf Thickness: 2.4mm.Tooth Config: TCG/Neg.
LENOX® Double Tang DIAMOND Reciprocating Saw Blade with a narrow kerf design for thinner, faster cuts. The cutting edge features nickel alloy brazed diamond particles that help to maintain sharpness, so it keeps on cutting long after conventional carbide grit fails. Fitted with a durable chrome alloy backing steel that provides extra stability. LENOX® DIAMOND Blades cut cleanly through cast iron, tile, granite and other abrasives, unlike bulky snap cutters which crush pipes and leave ragged, uneven cuts.1 x LENOX® Double Tang DIAMOND Reciprocating Saw Blade 225mm
The DEWALT DEWDT2160QZ HSS jigsaw blades are engineered to deliver a quality cut in a variety of ferrous and non-ferrous metals and are fully hardened high speed steel for increased durability.The blades have a T shank fitting for all T-shank Jigsaws. They are ideal for straight cuts in thin metal, non-ferrous metal, aluminium & sheet metal from 1.5 - 4mm thick.The DEWALT DEWDT2160QZ has the following specifications:Overall Length: 76mmLength: 50mmTooth Pitch: 1.2mmMax DOC: 4mmEquivalent Bosch Ref: T118A
Irwin Sabre Saw Blades 956R Nail Embedded Wood offer superior construction and design making them faster cutting and longer lasting. These blades cut nail embedded wood and are suitable for use with materials 5mm (3/16 Inch) and thicker. Length: 225mm.Teeth: 6 tpi.Irwin Sabre Saw Blades 956R Nail Embedded Wood Pack of 2. Length: 225mm.Teeth: 6 tpi.
These DEWALT HCS Jigsaw Blades are made from High Carbon Steel (HCS) and have been engineered to deliver a quality cut in a variety of materials, including wood, laminates and plastics.The DEWALT DT2165 (T101B) HCS Wood Jigsaw Blades are ideal for clean straight fine cuts in wood, chipboard, plywood, laminated chipboard & plastic up to 30mm thick.
Irwin Multi Material Circular Saw Blade with construction grade tungsten carbide tips which retain their edge for longer and can be resharpened. Fully hardened plate with expansion slots help to dissipate heat and prevent warping. With Triple Chip Grind teeth (TCG) for an excellent cutting finish and a corrosion resistant coating for longer quality performance.This IRWIN Multi Material Circular Saw Blade has the following specifications: Blade Diameter: 250mm.Bore: 30mm.Teeth: 84.Kerf Thickness: 2.5mm.Tooth Config: TCG/Neg.
The LENOX® General-Purpose Reciprocating Saw Blade Kit, contains a selection of blades that cover a wide range of applications. Each blade uses POWER BLAST TECHNOLOGY™ to increase blade life. High-speed blasting along the cutting edge strengthens the blade to reduce breaks and increase durability. Patented T2™ Technology reduces cutting forces on each tooth and optimises chip removal to allow efficient cutting in the widest range of materials. Supplied with a handy blade carry case and the following blades: 2 x 656R Nail Embedded Wood Cutting Reciprocating Saw Blades 150mm 6 TPI 2 x 624R Metal Cutting Reciprocating Saw Blades 150mm 24 TPI 2 x 818R Metal Cutting Reciprocating Saw Blades 200mm 18 TPI 2 x 810R General-Purpose Reciprocating Saw Blades 200mm 10 TPI 1 x 960R Demolition Reciprocating Saw Blade 225mm 10 TPI
The LENOX® DEMOLITION CT™ Reciprocating Saw Blade features carbide tipped teeth providing the highest performance in nail embedded wood. Each tooth is precision ground on multiple surfaces to cut through nails with ease. The high-performance carbide teeth are welded to the blade using the latest technology to increase durability and prevent tooth loss. Offering up to 10x longer life than standard bi-metal reciprocating saw blades. They have a tall, thick blade profile for maximum durability in tough demolition applications.1 x LENOX® 656RCT DEMOLITION CT™ Reciprocating Saw Blade 150mm 6 TPI
The DEWALT Series 40 Extra Fine Finish Circular Saw Blade is designed for use in stationary saws. With large, general purpose K10 carbide tips for cutting wood and non-ferrous metals. They can be resharpened up to 15 times. High precision laser manufacture ensures a flat blade body and engineered expansion slots prevent blade overheating and warping. These blades are designed with triple chip grind geometry which gives an excellent surface finish on the workpiece.This DEWALT Series 40 Circular Saw Blade has the following specification: Finish: Extra Fine.Blade Diameter: 216mm.Blade Bore: 30mm.Tooth Count: 80.Plate Thickness: 1.8mm.Kerf Thickness: 2.6mm.Grind Type: TCGN.Rake Angle: -5°.
The DEWALT bi-metal construction blades combine HCS and HSS for increased flexibility and durability. They can be used for fast cutting in wood, wood with nails and tough plastics. The universal shank fits all major brands including DEWALT, Bosch, Hitachi, Flex, Makita, Metabo and Skil.The DEWALT DEWDT2349QZ reciprocating blade is ideal to be used for fast cuts in wood with nails and tough plastics. The blade has a new Plunge point tip for accurate plunge.
The Starrett BU224S-5 Metal Cutting Jigsaw Blades with Unified Shank™, these blades will fit virtually all jigsaw machines. These blades feature 170% more weld contact area than standard bi-metal blades through the Unique™ solid state diffusion bonding process. This ensures exceptionally strong teeth, combined with the multiple cutting edges and split chip advantage, ensure that these blades typically last 25% longer than directly competing products. Supplied in a pack of 5. Specification: Length: 50mmWidth: 4.5mmThickness: 1mmTPI: 24Tooth: ScrollSet: Wavy Length dimension references tooth bearing section of the blades, the total length including shank is approximately 25mm longer.
These Irwin Wood Jigsaw Blades are made from Carbon steel for use in softer materials such as wood, laminated chipboard, and plastics. They have 3 Sided, fleam ground teeth for fast cut and clean finishes in all wood applications. T Shank for AEG, Bosch, DEWALT and Hitachi Jigsaws. These Irwin 10504228 (T234X) Wood Jigsaw Blades have progressive tooth spacing for straight, accurate cuts in thick and thin wood materials, hard and soft wood, particleboard and plywood 1-80mm.
DEWALT Construction Circular Saw Blade for use with portable machines to cut softwoods and composite materials. The impact resistant carbide teeth help to reduce the chance of chipping or breaking a tooth. With ultra-sharp cutting edges and Alternate Top Bevel (ATB) teeth to reduce splinters. The blade features a wedge shoulder to protect the carbide from nail impact. The fast, smooth cutting action and durable construction makes it ideal for demanding jobsite operations, rough timber and cutting through embedded nails.This DEWALT Construction Circular Saw Blade is for the cutting of rough timber, possibly with embedded nails. Specification: Blade Diameter: 160mmBlade Bore: 20mmTooth Count: 30Plate Thickness: 1.5mmKerf Thickness: 2.5mmGrind Type: ATBRake Angle: +10°
