The Irwin 618R Sabre Saw Blades have superior construction and design making them faster cutting and longer lasting. Cuts all metals including non ferrous, pipe conduit, stainless and sheet metal. Suitable for use with materials 1.5 to 10 mm (1/16 inch to 3/8 inch) thick, dependent on the TPI of the blade. Length: 150mm.Teeth: 18 tpi.
The Irwin 10 piece set of T-shank jigsaw blades for AEG, Bosch, DEWALT and Hitachi Jigsaws for metal and wood cutting are manufactured from high quality materials. Contain the following pieces: 2 x 10504221 (T111C) Wood cutting 100mm 8 tpi.2 x 10504218 (T144D) Wood cutting 100mm 6 tpi (fast cut).2 x 10504219 (T101B) Wood cutting 100mm 10 tpi.1 x 10504222 (T101D) Wood cutting 100mm 6 tpi (clean cut).2 x 10504220 (T118A) Metal cutting 92mm Progressive 17 - 23 tpi.1 x 10504225 (T118B) Metal cutting 92mm Progressive 11 - 13 tpi.
Bandsaw Blade for general purpose rips and cross-cuts in wood and wood composites.The specially hardened teeth maintain an ultra sharp edge giving an excellent finish to the work.To fit DEWALT DW738 and DW739 Bandsaws. Blade Length: 2,095mm.Blade Width: 12.0mm.Tooth Pitch: 4.2mm.
The DEWALT XPC Jigsaw blades have a optimised tooth angle which provides long life and clean tear-free cuts at high speeds in all wood materials. With a thicker blade body, increased taper angle and optimised tooth geometry for greater accuracy and control of cut. They have a slim narrow angled tooth design for clean cutting with less material breakout. The Plunge Point™ tip allows for easy plunge cutting into all wood and wood substitute materials. Optimum tooth geometry provides increased blade and tooth strength and premium steel body for longer blade cutting life. Larger deeper gullets between teeth for easier wood chip removal and faster cutting. For use in hard and soft woods including laminates, plywood, chipboard and plastics.The DEWALT DT2209-QZ (T101D) XPC HCS Wood Jigsaw Blades provide clean and fast straight cuts in wood, chipboard and plastics.
The DEWALT Series 60 Extreme Circular Saw Blade with laser cut expansion slots that help to reduce vibration and noise. The extra large sub micro grain carbide teeth remain sharper for much longer and can be resharpened up to 20 times. This stationary circular saw blade range can be used for cutting in natural wood, plywood, laminates, particleboard and MDF. Ideal for both table and mitre saws.The DEWALT DT4322 Series 60 Circular Saw Blade has the following specification: Finish: General Purpose.Blade Diameter: 250mm.Bore Size: 30mm.Tooth Count: 40.Plate Thickness: 2.2mm.Kerf Thickness: 3.0mm.Grind: ATB.Rake Angle: +10°.
Irwin Jigsaw Metal Cutting Blades are made from fully hardened high speed steel for use in metal, aluminum, and no-ferrous metal. HSS milled teeth for a longer life and fast, even cuts in thin and thick meta metal. Straight cuts in thin metal, non-ferrous metal, sheet metal, aluminium 0.2-1 mm (1/64Inch -3/64in). Length: 92mm. Pitch: 36 Precise Cut. Supplied in a pack of 5.
The DEWALT Extreme Cement Saw Blade features synthetic PCD (Polycrystalline Diamond) tipped teeth. These PCD coated teeth provide 100% longer life in fibre cement than TCT tipped blades. The laser cut blade features anti-vibration body slots and precision ground tips. The blade design also helps to reduce dust production when cutting fibre cement materials. Suitable for cutting a range of materials including fibre cement board, laminate/pre finished flooring, MDF, plywood, etc.This DEWALT Extreme PCD Fibre Cement Saw Blade has the following specification: Blade Diameter: 250mm.Bore Size: 30mm.Tooth Count: 12.Kerf Thickness: 2.2mm.Plate Thickness: 1.6mm.Grind: FTOP.Rake Angle: 12°.
The Starrett BU424-5 ;Metal Cutting Jigsaw Blades with Unified Shank™ will fit virtually all jigsaw machines. These blades feature 170% more weld contact area than standard bi-metal blades through the Unique™ solid state diffusion bonding process. This ensures exceptionally strong teeth, combined with the multiple cutting edges and split chip advantage, ensure that these blades typically last 25% longer than directly competing products. Supplied in a pack of 5. Specification Length: 100mm.Width: 9.5mm.Thickness: 1mm.TPI: 24.Tooth: Regular.Set: Wavy. Length dimension references tooth bearing section of the blades, the total length including shank is approximately 25mm longer.
The Faithfull Sabre Saw Blade Set contains an assortment of high-quality blades manufactured for precision and stability when cutting. Their design and tooth geometry vary with regard to speed and the cutting application in which they are used for.Suitable for use with most all-purpose saws (pin fitting, manual or quick-release). The set are supplied in a handy storage case which can safely store a large quantity of sabre saw blades and can extend to accommodate larger blade lengths. Contains: 2 x S617K Sabre Saw Blades 150mm 3 TPI. Ideal for coarse wood, free of nails (20-100mm) and pruning green wood (dia. up to 100mm). Especially for curved cuts/plunge cuts. 2 x S922BF Sabre Saw Blades 150mm 14 TPI. Ideal for thick sheet metal (3-8mm), solid pipes/profiles (dia.10-100mm). 2 x S918E Sabre Saw Blades 150mm 18 TPI. Ideal for thin sheet metal (2-5mm) fine, closed pipes/profiles (dia.5-100mm). 2 x S611DF Bi-Metal Sabre Saw Blades 150mm 6 TPI. Ideal for use on wood, chipboard, wood with nails/metal, window frames and fibreglass/epoxy up to 100mm thick. 2 x S922HF Bi-Metal Sabre Saw Blades 150mm 10 TPI. Ideal for use on wood, plastic, non-ferrous metals and are perfect for wood embedded with nails - great for pallet repair. They will also cut composite materials such as plastic, pipe and carbon steel. Ideally suited for materials that are 3.2mm and thicker. Specifications: Length: 150mm.Pack Quantity: 10 piece.
The Starrett SB6-A Reciprocating Blade Kit contains a selection of unified shank 3X POWER Bi-Metal reciprocating blades. They provide up to three times the life and increased cutting rates compared to our previous line, setting a new level for performance and value on the market. With an optimised tooth pitch for a reduction in vibration, offering cleaner cuts and less fatigue. They are unbreakable; providing safety and reliability. Contains: 1 x B66 Wood Cutting Blade 152 x 19 x 0.89mm, 6 TPI1 x B610 Multipurpose Blade 152 x 19 x 0.90mm, 10 TPI1 x B614 Metal Cutting Blade 152 x 19 x 0.90mm, 14 TPI1 x B618 Metal Cutting Blade 152 x 19 x 0.90mm, 18 TPI1 x B624 Metal Cutting Blade 152 x 19 x 0.90mm, 24 TPI
DEWALT FlexVolt XR Circular Saw Blade with fine grade carbide tips and an ATB+R tooth configuration. This helps to reduce the cutting force required and offer increased efficiency for maximum cordless run time. The ultra-thin kerf design and optimised face shear provide fast, smooth cuts. The body features expansion slots for low vibration and reduced noise. Nail tough blade, perfect for cutting through nail embedded wood. Suited to the cutting of large and thick timbers and various other site materials. Optimised for use with FlexVolt Power Tools.This DEWALT FlexVolt XR Circular Saw Blade has the following specification: Application: Ripping, Crosscutting.Finish: Fine.Blade Diameter: 190mm.Bore: 30mm.Teeth: 60.Kerf Thickness: 1.55mm.Plate Thickness: 0.99mm.Grind: ATB+R.Rake Angle: 25°.
The Irwin Construction Circular Saw Blade with expansion slots which dissipate heat and prevent warping. Its construction grade tungsten carbide tips retain their edge, and the plate is fully hardened for durability. The blade features alternate top bevel tooth grind (ATB) for cross cutting and ripping in all woods. Its corrosion resistant coating provides longer quality performance. Suitable for use with handheld corded machines.This IRWIN Construction Circular Saw Blade has the following specification: Blade Diameter: 210mm.Bore: 30mm.Teeth: 40.Kerf Thickness: 2.5mm.Tooth Config: ATB.
DEWALT FlexVolt XR Circular Saw Blade with fine grade carbide tips and an ATB+R tooth configuration. This helps to reduce the cutting force required and offer increased efficiency for maximum cordless run time. The ultra-thin kerf design and optimised face shear provide fast, smooth cuts. The body features expansion slots for low vibration and reduced noise. Nail tough blade, perfect for cutting through nail embedded wood. Suited to the cutting of large and thick timbers and various other site materials. Optimised for use with FlexVolt Power Tools.This DEWALT FlexVolt XR Circular Saw Blade has the following specification: Application: Ripping.Finish: General Purpose.Blade Diameter: 190mm.Bore: 30mm.Teeth: 24.Kerf Thickness: 1.55mm.Plate Thickness: 0.99mm.Grind: ATB+R.Rake Angle: 25°.
The Irwin Construction Circular Saw Blade with expansion slots which dissipate heat and prevent warping. Its construction grade tungsten carbide tips retain their edge, and the plate is fully hardened for durability. The blade features alternate top bevel tooth grind (ATB) for cross cutting and ripping in all woods. Its corrosion resistant coating provides longer quality performance. Suitable for use with handheld corded machines.This IRWIN Construction Circular Saw Blade has the following specification: Blade Diameter: 180mm.Bore: 30mm.Teeth: 24.Kerf Thickness: 2.5mm.Tooth Config: ATB.
The DEWALT Series 60 Extreme Circular Saw Blade with laser cut expansion slots that help to reduce vibration and noise. The extra large sub micro grain carbide teeth remain sharper for much longer and can be resharpened up to 20 times. This stationary circular saw blade range can be used for cutting in natural wood, plywood, laminates, particleboard and MDF. Ideal for both table and mitre saws.The DEWALT DT4321 Series 60 Circular Saw Blade has the following specification: Finish: Fast Rip.Blade Diameter: 250mm.Bore Size: 30mm.Tooth Count: 30.Plate Thickness: 3.0mm.Kerf Thickness: 2.2mm.Grind: ATB.Rake Angle: +10°.
The DEWALT Series 40 Circular Saw Blade is designed for use in stationary saws. With large, general purpose K10 carbide tips for cutting wood and non-ferrous metals. They can be resharpened up to 15 times. High precision laser manufacture ensures a flat blade body and engineered expansion slots prevent blade overheating and warping. These blades are designed with Alternate Top Bevel (ATB) teeth to reduce splinters.The DEWALT DEWDT4031QZ circular saw blade has the following specifications: Finish: General Purpose.Blade Diameter: 184mm.Bore Size: 16mm.Tooth Count: 28.Plate Thickness: 1.7mm.Kerf Thickness: 2.6mm.Grind Geometry: ATB Rake Angle: +25°.
The DEWALT HCS Progressor Tooth Jigsaw Blades are ideal for fast cutting of different material thicknesses with a single blade. The blades are made from high carbon steel for increased durability with a T shank fitting for all T-shank Jigsaws. The PROGRESSOR Blade can be used for woods, chipboard, plywood and fibre boards up to 65mm thick.1 x Pack of 5 DEWALT DT2057 HCS Progressor Tooth Jigsaw Blades T234X
Faithfull Professional TCT Circular Saw Blade with 7mm Tungsten Carbide Tipped teeth to ensure a long working life and accuracy of cut. Each blade has laser cut expansion slots to improve their performance by reducing heat build up. Specially manufactured for use with mitre saws and radial arm saws. For safety purposes, a zero degree blade must be used to avoid kickback when cutting timber by means of lowering the blade onto the workpiece.This Faithfull TCT Circular Saw Blade has the following specification: Blade Diameter: 250mm.Bore: 30mm.Teeth: 80.Bush: 25 & 16mm.Rake: ZERO.
Faithfull Professional Triple Chip Ground TCT Circular Saw Blade with 7mm Tungsten Carbide Tipped teeth to ensure a long working life and accuracy of cut. Each blade has laser cut expansion slots to improve their performance by reducing heat build up. Negative rake blade (NEG) is advisable when the blade is taken to the workpiece. This blade has triple angle ground teeth and negative rake for use with Mitre Saws and Radial Arm Saws when cutting laminates and aluminium.This Faithfull TCT Circular Saw Blade has the following specification: Blade Diameter: 250mm.Bore: 30mm.Teeth: 60.Bush: 25 & 16mm.Rake: TCG NEG.
Faithfull Professional TCT Circular Saw Blade with 7mm Tungsten Carbide Tipped teeth to ensure a long working life and accuracy of cut. Suitable for cutting wood with the odd nail. All the blades in this range fit most popular makes of power machines.This Faithfull TCT Circular Saw Blade has the following specification: Blade Diameter: 184mm.Bore: 30mm.Teeth: 14.Rake: NEG.
Faithfull Professional Triple Chip Ground TCT Circular Saw Blade with 7mm Tungsten Carbide Tipped teeth to ensure a long working life and accuracy of cut. Each blade has laser cut expansion slots to improve their performance by reducing heat build up. Negative rake blade (NEG) is advisable when the blade is taken to the workpiece. This blade has triple angle ground teeth and negative rake for use with Mitre Saws and Radial Arm Saws when cutting laminates and aluminium.This Faithfull TCT Circular Saw Blade has the following specification: Blade Diameter: 216mm.Bore: 30mm.Teeth: 48.Rake: TCG NEG.
Faithfull Professional TCT Circular Saw Blade with 7mm Tungsten Carbide Tipped teeth to ensure a long working life and accuracy of cut. Each blade has laser cut expansion slots to improve their performance by reducing heat build up. Available in a variety of sizes with different tooth counts that allow the user to select the correct blade for the job in hand. All the blades in this range fit most popular makes of power machines.This Faithfull TCT Circular Saw Blade has the following specification: Application: Fine Finish.Blade Diameter: 300mm.Bore: 30mm.Teeth: 60.Rake: POS.
Faithfull Professional TCT Circular Saw Blade with 7mm Tungsten Carbide Tipped teeth to ensure a long working life and accuracy of cut. Each blade has laser cut expansion slots to improve their performance by reducing heat build up. Available in a variety of sizes with different tooth counts that allow the user to select the correct blade for the job in hand. All the blades in this range fit most popular makes of power machines.This Faithfull TCT Circular Saw Blade has the following specification: Application: Fine Cross Cut.Blade Diameter: 254mm.Bore: 30mm.Teeth: 40.Bush: 25 & 16mm.Rake: POS.
Faithfull Professional TCT Circular Saw Blade with 7mm Tungsten Carbide Tipped teeth to ensure a long working life and accuracy of cut. Each blade has laser cut expansion slots to improve their performance by reducing heat build up. Available in a variety of sizes with different tooth counts that allow the user to select the correct blade for the job in hand. All the blades in this range fit most popular makes of power machines.This Faithfull TCT Circular Saw Blade has the following specification: Application: Fine Cross Cut.Blade Diameter: 300mm.Bore: 30mm.Teeth: 40.Rake: POS.
Faithfull Professional TCT Circular Saw Blade with 7mm Tungsten Carbide Tipped teeth to ensure a long working life and accuracy of cut. Each blade has laser cut expansion slots to improve their performance by reducing heat build up. Available in a variety of sizes with different tooth counts that allow the user to select the correct blade for the job in hand. All the blades in this range fit most popular makes of power machines.This Faithfull TCT Circular Saw Blade has the following specification: Application: General Purpose.Blade Diameter: 254mm.Bore: 30mm.Teeth: 30.Bush: 25 & 16mm.Rake: POS.
Faithfull Professional TCT Circular Saw Blade with 7mm Tungsten Carbide Tipped teeth to ensure a long working life and accuracy of cut. Each blade has laser cut expansion slots to improve their performance by reducing heat build up. Available in a variety of sizes with different tooth counts that allow the user to select the correct blade for the job in hand. All the blades in this range fit most popular makes of power machines.This Faithfull TCT Circular Saw Blade has the following specification: Application: Fast Rip.Blade Diameter: 230mm.Bore: 30mm.Teeth: 20.Rake: POS.
Faithfull Professional TCT Circular Saw Blade with 7mm Tungsten Carbide Tipped teeth to ensure a long working life and accuracy of cut. Each blade has laser cut expansion slots to improve their performance by reducing heat build up. Available in a variety of sizes with different tooth counts that allow the user to select the correct blade for the job in hand. All the blades in this range fit most popular makes of power machines.This Faithfull TCT Circular Saw Blade has the following specification: Application: Fast Rip.Blade Diameter: 200mm.Bore: 30mm.Teeth: 24.Bush: 25 & 16mm.Rake: POS.
Faithfull Professional TCT Circular Saw Blade with 7mm Tungsten Carbide Tipped teeth to ensure a long working life and accuracy of cut. Each blade has laser cut expansion slots to improve their performance by reducing heat build up. Available in a variety of sizes with different tooth counts that allow the user to select the correct blade for the job in hand. All the blades in this range fit most popular makes of power machines.This Faithfull TCT Circular Saw Blade has the following specification: Application: Fast Rip.Blade Diameter: 190mm.Bore: 30mm.Teeth: 24.Bush: 20 & 16mm.Rake: POS.
Faithfull Professional TCT Circular Saw Blade with 7mm Tungsten Carbide Tipped teeth to ensure a long working life and accuracy of cut. Each blade has laser cut expansion slots to improve their performance by reducing heat build up. Available in a variety of sizes with different tooth counts that allow the user to select the correct blade for the job in hand. All the blades in this range fit most popular makes of power machines.This Faithfull TCT Circular Saw Blade has the following specification: Application: Fast Rip.Blade Diameter: 190mm.Bore: 16mm.Teeth: 12.Rake: POS.
Faithfull Professional TCT Circular Saw Blade with 7mm Tungsten Carbide Tipped teeth to ensure a long working life and accuracy of cut. Each blade has laser cut expansion slots to improve their performance by reducing heat build up. Available in a variety of sizes with different tooth counts that allow the user to select the correct blade for the job in hand. All the blades in this range fit most popular makes of power machines.This Faithfull TCT Circular Saw Blade has the following specification: Application: Fine Cross Cut.Blade Diameter: 180mm.Bore: 16mm.Teeth: 40.Rake: POS.
Faithfull Professional TCT Circular Saw Blade with 7mm Tungsten Carbide Tipped teeth to ensure a long working life and accuracy of cut. Each blade has laser cut expansion slots to improve their performance by reducing heat build up. Available in a variety of sizes with different tooth counts that allow the user to select the correct blade for the job in hand. All the blades in this range fit most popular makes of power machines.This Faithfull TCT Circular Saw Blade has the following specification: Application: Fast Rip.Blade Diameter: 180mm.Bore: 30mm.Teeth: 24.Bush: 20mm.Rake: POS.
Faithfull Professional TCT Circular Saw Blade with 7mm Tungsten Carbide Tipped teeth to ensure a long working life and accuracy of cut. Each blade has laser cut expansion slots to improve their performance by reducing heat build up. Available in a variety of sizes with different tooth counts that allow the user to select the correct blade for the job in hand. All the blades in this range fit most popular makes of power machines.This Faithfull TCT Circular Saw Blade has the following specification: Blade Diameter: 180mm.Bore: 16mm.Teeth: 40.Bush: 20mm.Rake: POS.
Faithfull Professional TCT Circular Saw Blade with 7mm Tungsten Carbide Tipped teeth to ensure a long working life and accuracy of cut. Each blade has laser cut expansion slots to improve their performance by reducing heat build up. Available in a variety of sizes with different tooth counts that allow the user to select the correct blade for the job in hand. All the blades in this range fit most popular makes of power machines.This Faithfull TCT Circular Saw Blade has the following specification: Application: Fast Rip.Blade Diameter: 165mm.Bore: 30mm.Teeth: 18.Bush: 20 & 16mm.Rake: POS.
Faithfull Professional TCT Circular Saw Blade with 7mm Tungsten Carbide Tipped teeth to ensure a long working life and accuracy of cut. Each blade has laser cut expansion slots to improve their performance by reducing heat build up. Available in a variety of sizes with different tooth counts that allow the user to select the correct blade for the job in hand. All the blades in this range fit most popular makes of power machines.This Faithfull TCT Circular Saw Blade has the following specification: Application: Fast Rip.Blade Diameter: 160mm.Bore: 30mm.Teeth: 16.Bush: 20 & 16mm.Rake: POS.
Faithfull Professional TCT Circular Saw Blade with 7mm Tungsten Carbide Tipped teeth to ensure a long working life and accuracy of cut. Each blade has laser cut expansion slots to improve their performance by reducing heat build up. Available in a variety of sizes with different tooth counts that allow the user to select the correct blade for the job in hand. All the blades in this range fit most popular makes of power machines.This Faithfull TCT Circular Saw Blade has the following specification: Application: Fast Rip.Blade Diameter: 160mm.Bore: 30mm.Teeth: 24.Bush: 28.6, 20 & 16mm.Rake: POS.
