SBS80 Series Metric Sockets featuring the dynamic drive profile, for higher efficiency and an optimum grip without damaging the bolts and nuts. Manufactured from vanadium-extra steel with a nickel and matt chrome plated finish. 1/2in square drive.Size: 32mm.
SBS80 Series Metric Sockets featuring the dynamic drive profile, for higher efficiency and an optimum grip without damaging the bolts and nuts. Manufactured from vanadium-extra steel with a nickel and matt chrome plated finish. 1/2in square drive.Size: 27mm.
SBS80 Series Metric Sockets featuring the dynamic drive profile, for higher efficiency and an optimum grip without damaging the bolts and nuts. Manufactured from vanadium-extra steel with a nickel and matt chrome plated finish. 1/2in square drive.Size: 23mm.
SBS80 Series Metric Sockets featuring the dynamic drive profile, for higher efficiency and an optimum grip without damaging the bolts and nuts. Manufactured from vanadium-extra steel with a nickel and matt chrome plated finish. 1/2in square drive.Size: 22mm.
SBS80 Series Metric Sockets featuring the dynamic drive profile, for higher efficiency and an optimum grip without damaging the bolts and nuts. Manufactured from vanadium-extra steel with a nickel and matt chrome plated finish. 1/2in square drive.Size: 18mm.
The Bahco Handled Flat Second Cut File is for the same jobs as the hand file 100, but is sometimes preferred because its tapered shape enables the user to reach into angles and corners more easily. Slightly tapered in width and thickness. Suitable for general work on iron and steel. Double cut on both sides and single cut on both edges.1 x Bahco Handled Flat Second 1-110-08-2-2 Cut File 200mm (8in)
Bahco Handled Flat File 1-110 with soft-grip ERGO™ handle does the same job as hand files but are sometimes preferred because the tapered shape enables the user to reach into angles and corners more easily. Slightly tapered in width and thickness. Suitable for general work on iron and steel. Double cut on both sides and single cut on both edges. Second Cut: Approx 36 teeth per 25mm (Medium).Bastard Cut: Approx 26 teeth per 25mm (Coarse).
Bahco 1-106 series Hand files with Oberg cut are useful for all flat filing. The Oberg cut gives a high removal rate and smooth surface finish on most materials. The edges and surfaces are parallel. Surfaces single cut, bastard, with chipbreaking teeth. One edge single cut.Size 200mm (8in).
Bahco 1-106 series Hand files with Oberg cut are useful for all flat filing. The Oberg cut gives a high removal rate and smooth surface finish on most materials. The edges and surfaces are parallel. Surfaces single cut, bastard, with chipbreaking teeth. One edge single cut.Size 250mm (10in).
The Bahco Handled Hand Cut File 1-100 with a soft grip ERGO™ handle are perfect for filing flat surfaces, sharp corners and shoulders as well as for deburring. A double cut file may also be used for work on high-alloy tool steels. Also useful for the sharpening of heavy implements. High removal rate. Edges and surfaces parallel. Surfaces double cut, one edge uncut, one edge single cut. Second Cut: Approx 36 teeth per 25mm (Medium).Bastard Cut: Approx 26 teeth per 25mm (Coarse).Size 250mm (6in)Cut: hand second.With ergo- grip handle.
The Bahco Handled Hand Cut File 1-100 with a soft grip ERGO™ handle are perfect for filing flat surfaces, sharp corners and shoulders as well as for deburring. A double cut file may also be used for work on high-alloy tool steels. Also useful for the sharpening of heavy implements. High removal rate. Edges and surfaces parallel. Surfaces double cut, one edge uncut, one edge single cut. Second Cut: Approx 36 teeth per 25mm (Medium).Bastard Cut: Approx 26 teeth per 25mm (Coarse).Size 150mm (6in)Cut: hand bastard.With ergo grip handle.
The Bahco Handled Hand Cut File 1-100 with a soft grip ERGO™ handle are perfect for filing flat surfaces, sharp corners and shoulders as well as for deburring. A double cut file may also be used for work on high-alloy tool steels. Also useful for the sharpening of heavy implements. High removal rate. Edges and surfaces parallel. Surfaces double cut, one edge uncut, one edge single cut. Second Cut: Approx 36 teeth per 25mm (Medium).Bastard Cut: Approx 26 teeth per 25mm (Coarse).Size: 200mm (8in)Cut: hand secondWith ergo-grip handle.
The Bahco Handled Hand Cut File 1-100 with a soft grip ERGO™ handle are perfect for filing flat surfaces, sharp corners and shoulders as well as for deburring. A double cut file may also be used for work on high-alloy tool steels. Also useful for the sharpening of heavy implements. High removal rate. Edges and surfaces parallel. Surfaces double cut, one edge uncut, one edge single cut. Second Cut: Approx 36 teeth per 25mm (Medium).Bastard Cut: Approx 26 teeth per 25mm (Coarse).Size: 200mm (8in)Cut: hand bastardWith ergo-grip handle.
The Bahco Handled Hand Cut File 1-100 with a soft grip ERGO™ handle are perfect for filing flat surfaces, sharp corners and shoulders as well as for deburring. A double cut file may also be used for work on high-alloy tool steels. Also useful for the sharpening of heavy implements. High removal rate. Edges and surfaces parallel. Surfaces double cut, one edge uncut, one edge single cut. Second Cut: Approx 36 teeth per 25mm (Medium).Bastard Cut: Approx 26 teeth per 25mm (Coarse).Size 250mm (10in)Cut: hand bastardWith ergo-grip handle.
Tapered half-round cross section allows use on convex and concave surfaces. Suitable for deburring work. The edges and surfaces are tapered towards the point. 4in and 6in files are fully pointed, 8in and longer semi-pointed. Double cut.Size 200mm (8in)Cut: half round second.Tanged.
Tapered half-round cross section allows use on convex and concave surfaces. Suitable for deburring work. The edges and surfaces are tapered towards the point. 4in and 6in files are fully pointed, 8in and longer semi-pointed. Double cut.Size 150mm (6in)Cut: half round second.Tanged.
Tapered half-round cross section allows use on convex and concave surfaces. Suitable for deburring work. The edges and surfaces are tapered towards the point. 4in and 6in files are fully pointed, 8in and longer semi-pointed. Double cut.Size 100mm (4in)Cut: half-round second.Tanged.
Used for working in wood, plastic, plywood, wallboard and other soft materials with edges and surfaces tapered towards point. Coarse cut. Half round.Length: 200mm (8in).Tanged.
Surfaces taper to a point, flat and convex surfaces double cut. For fine filing and polishing jobs. Used by engravers, precision engineers, instrument makers, watchmakers and goldsmiths. Half round.Size: 16cm.Cut: 4 (dead smooth).Type: half round needle file.
Surfaces taper to a point, flat and convex surfaces double cut. For fine filing and polishing jobs. Used by engravers, precision engineers, instrument makers, watchmakers and goldsmiths. Half round.Size: 16cm.Cut: 2 (smooth).Type; half round needle file.
Surfaces taper to a point, flat and convex surfaces double cut. For fine filing and polishing jobs. Used by engravers, precision engineers, instrument makers, watchmakers and goldsmiths. Half round.Size: 16cm.Cut.: 0 (bastard).Type: half-round needle file.
Surfaces taper to a point, flat and convex surfaces double cut. For fine filing and polishing jobs. Used by engravers, precision engineers, instrument makers, watchmakers and goldsmiths. Half round.Size: 14cm.Cut: 2 (smooth).Type: half round needle file.
Surfaces taper to a point, flat and convex surfaces double cut. For fine filing and polishing jobs. Used by engravers, precision engineers, instrument makers, watchmakers and goldsmiths. Half round.Size: 14cm.Cut: 0 (bastard).Type: half round needle file.
Bahco Half Round Cut File with a tapered half-round cross section to allow use on convex and concave surfaces. The edges and surfaces are tapered towards the point. It has a double cut surface, and it suitable for deburring work. Smooth Cut: Approx 62 teeth per 25mm (Fine).Second Cut: Approx 36 teeth per 25mm (Medium).Bastard Cut: Approx 26 teeth per 25mm (Coarse).Size 200mm (8in)Cut: half-round bastard.Tanged.
Bahco Half Round Cut File with a tapered half-round cross section to allow use on convex and concave surfaces. The edges and surfaces are tapered towards the point. It has a double cut surface, and it suitable for deburring work. Smooth Cut: Approx 62 teeth per 25mm (Fine).Second Cut: Approx 36 teeth per 25mm (Medium).Bastard Cut: Approx 26 teeth per 25mm (Coarse).Size 150mm (6in)Cut: half round bastard.Tanged.
Bahco Half Round Cut File with a tapered half-round cross section to allow use on convex and concave surfaces. The edges and surfaces are tapered towards the point. It has a double cut surface, and it suitable for deburring work. Smooth Cut: Approx 62 teeth per 25mm (Fine).Second Cut: Approx 36 teeth per 25mm (Medium).Bastard Cut: Approx 26 teeth per 25mm (Coarse).Size 100mm (4in)Cut: half round bastard.Tanged.
Bahco Half Round Cut File with a tapered half-round cross section to allow use on convex and concave surfaces. The edges and surfaces are tapered towards the point. It has a double cut surface, and it suitable for deburring work. Smooth Cut: Approx 62 teeth per 25mm (Fine).Second Cut: Approx 36 teeth per 25mm (Medium).Bastard Cut: Approx 26 teeth per 25mm (Coarse).Size 300mm (12in)Cut: half-round bastard.Tanged.
Bahco Half Round Cut File with a tapered half-round cross section to allow use on convex and concave surfaces. The edges and surfaces are tapered towards the point. It has a double cut surface, and it suitable for deburring work. Smooth Cut: Approx 62 teeth per 25mm (Fine).Second Cut: Approx 36 teeth per 25mm (Medium).Bastard Cut: Approx 26 teeth per 25mm (Coarse).Size 250mm (10in)Cut: half-round bastard.Tanged.
Bahco General Purpose Axe with Fibreglass Handle is ideal for lighter applications. Reverse side of head suitable for use as a hammer. Comfortable 3-component handle with non-slip grip provides safety and long life. Weight: 1000g Handle Length: 380mm
This Bahco sports knife has a durable polyamide handle, with stainless steel blades and mechanism. The blade locks securely into position when fully unfolded and is only released with the unlock button. This avoids accidental folding. With a small hole on the back end, the knife allows for a safety strap to be attached, for added safety. The BAHGSK knife uses utility blades, which can be replaced when blunt.
The Bahco GS-76 Grass Shears with hardened blades, which are carefully set for self-grinding during use to ensure a good cutting edge. The precise spring mechanism ensures that the blades are kept aligned in use on grass, and the lever mechanism is designed for minimum effort in operating the shears. Three cutting head positions enable access to difficult-to-reach corners and edges which need trimming. The blades are solely made to cut grass. Length: 355mm.Weight: 435g.
This Bahco 'Classic' utility knife is a compact knife with a tough, full aluminium body. Blade change is available via the turning screw and the magnetic blade holder ensures easy blade changing. The blade is fully retractable, and the knife allows a strap to be attached for added safety.
This Bahco KG-Series knife has a fixed blade and has a tough, aluminium body. It features a magnetic blade holder, which allows for easy blade changing. The Bahco blade is made of carbon steel which ensures maximum sharpness with a long-life performance. The knife allows a strap to be attached for added safety.
For the same jobs as the hand file 100, but is sometimes preferred because its tapered shape enables the user to reach into angles and corners more easily. Slightly tapered in width and thickness. Suitable for general work on iron and steel. Double cut on both sides and single cut on both edges.Size 200mm (8in)Cut: flat smooth.Tanged.
For the same jobs as the hand file 100, but is sometimes preferred because its tapered shape enables the user to reach into angles and corners more easily. Slightly tapered in width and thickness. Suitable for general work on iron and steel. Double cut on both sides and single cut on both edges.Size 150mm (6in)Cut: flat smooth.Tanged.
For the same jobs as the hand file 100, but is sometimes preferred because its tapered shape enables the user to reach into angles and corners more easily. Slightly tapered in width and thickness. Suitable for general work on iron and steel. Double cut on both sides and single cut on both edges.Size 300mm (12in)Cut: flat smooth.Tanged.
