Bahco Handled Round File 1-230 is fitted with a ERGO™ handle. These files are perfect for filing circular openings or concave surfaces. Tapered towards the point, 8in files are semi-pointed and double cut. Second Cut: Approx. 36 teeth per 25mm (Medium).Bastard Cut: Approx. 26 teeth per 25mm (Coarse).Bahco Handled Round Bastard File 1-230-08-1-2 Size: 200mm (8in).Cut: Round Bastard File.
Bahco Handled Half Round Cut File with a ERGO™ handle is a tapered half round file with cross section which allows use on convex and concave surfaces, suitable for deburring work. The edges and surfaces are tapered towards the point. 8in file are semi-pointed. Double cut. Second Cut: Approx 36 teeth per 25mm (Medium).Bastard Cut: Approx 26 teeth per 25mm (Coarse).Bahco Handled Half Round Second Cut File 1-210-08-2-2 Size: 200mm (8in).Cut: Half Round Second Cut.
Bahco Handled Half Round Cut File with a ERGO™ handle is a tapered half round file with cross section which allows use on convex and concave surfaces, suitable for deburring work. The edges and surfaces are tapered towards the point. 8in file are semi-pointed. Double cut. Second Cut: Approx 36 teeth per 25mm (Medium).Bastard Cut: Approx 26 teeth per 25mm (Coarse).Bahco Handled Half Round Bastard Cut File 1-210-08-1-2 Size: 200mm (8in).Cut: Half Round Bastard.
Bahco Handled Three-Square Second Cut File 1-170 with an ERGO™ handle. These three-square files are ideal for deburring and filing angles and internal corners. Also for filing of holes and large fillets as well as concave surfaces. Its tapered surfaces make it well suited for flat filing. It has an equilateral triangle, tapered shape towards the point, and double cut surfaces. The two component handle gives comfort and control during use. It also incorporates a handy hanging slot. Size: 200mm (8in).Cut: Second Cut.
Handled square files with double cut teeth for filing slots, keyways, grooves, rectangular holes, internal corners and for fine-adjustment of cutting tools. The bi-material handle gives comfort and control during use. It also incorporates a handy hanging slot.Slightly tapered towards tip for surface filing.Second Cut: Approx 36 teeth per 25mm (Medium).
Handled square files with double cut teeth for filing slots, keyways, grooves, rectangular holes, internal corners and for fine-adjustment of cutting tools. The bi-material handle gives comfort and control during use. It also incorporates a handy hanging slot.Slightly tapered towards tip for surface filing.Ideal for filing grooves, rectangular holes, internal corners and fine adjustment of cutting tools. 6 inch square handled second cut file.
SBS60 series sockets featuring the dynamic drive profile, for higher efficiency and an optimal grip without damaging the bolts and nuts. Manufactured from vanadium-extra steel, with nickel and matt chrome-plated finish.1/4in square drive. DIN 3124 / ISO 2725. 1/4in 10 DIN 3120 / ISO 1174.Size: 9mm.
SBS60 series sockets featuring the dynamic drive profile, for higher efficiency and an optimal grip without damaging the bolts and nuts. Manufactured from vanadium-extra steel, with nickel and matt chrome-plated finish.1/4in square drive. DIN 3124 / ISO 2725. 1/4in 10 DIN 3120 / ISO 1174.Size: 8mm.
SBS60 series sockets featuring the dynamic drive profile, for higher efficiency and an optimal grip without damaging the bolts and nuts. Manufactured from vanadium-extra steel, with nickel and matt chrome-plated finish.1/4in square drive. DIN 3124 / ISO 2725. 1/4in 10 DIN 3120 / ISO 1174.Size: 7mm.
SBS60 series sockets featuring the dynamic drive profile, for higher efficiency and an optimal grip without damaging the bolts and nuts. Manufactured from vanadium-extra steel, with nickel and matt chrome-plated finish.1/4in square drive. DIN 3124 / ISO 2725. 1/4in 10 DIN 3120 / ISO 1174.Size: 6mm.
SBS60 series sockets featuring the dynamic drive profile, for higher efficiency and an optimal grip without damaging the bolts and nuts. Manufactured from vanadium-extra steel, with nickel and matt chrome-plated finish.1/4in square drive. DIN 3124 / ISO 2725. 1/4in 10 DIN 3120 / ISO 1174.Size: 5mm.
SBS60 series sockets featuring the dynamic drive profile, for higher efficiency and an optimal grip without damaging the bolts and nuts. Manufactured from vanadium-extra steel, with nickel and matt chrome-plated finish.1/4in square drive. DIN 3124 / ISO 2725. 1/4in 10 DIN 3120 / ISO 1174.Size: 14mm.
SBS60 series sockets featuring the dynamic drive profile, for higher efficiency and an optimal grip without damaging the bolts and nuts. Manufactured from vanadium-extra steel, with nickel and matt chrome-plated finish.1/4in square drive. DIN 3124 / ISO 2725. 1/4in 10 DIN 3120 / ISO 1174.Size: 13mm.
SBS60 series sockets featuring the dynamic drive profile, for higher efficiency and an optimal grip without damaging the bolts and nuts. Manufactured from vanadium-extra steel, with nickel and matt chrome-plated finish.1/4in square drive. DIN 3124 / ISO 2725. 1/4in 10 DIN 3120 / ISO 1174.Size: 12mm.
SBS60 series sockets featuring the dynamic drive profile, for higher efficiency and an optimal grip without damaging the bolts and nuts. Manufactured from vanadium-extra steel, with nickel and matt chrome-plated finish.1/4in square drive. DIN 3124 / ISO 2725. 1/4in 10 DIN 3120 / ISO 1174.Size: 11mm.
SBS60 series sockets featuring the dynamic drive profile, for higher efficiency and an optimal grip without damaging the bolts and nuts. Manufactured from vanadium-extra steel, with nickel and matt chrome-plated finish.1/4in square drive. DIN 3124 / ISO 2725. 1/4in 10 DIN 3120 / ISO 1174.Size: 10mm.
SBS80 Series Metric Sockets featuring the dynamic drive profile, for higher efficiency and an optimum grip without damaging the bolts and nuts. Manufactured from vanadium-extra steel with a nickel and matt chrome plated finish. 1/2in square drive.Size: 9mm.
SBS80 Series Metric Sockets featuring the dynamic drive profile, for higher efficiency and an optimum grip without damaging the bolts and nuts. Manufactured from vanadium-extra steel with a nickel and matt chrome plated finish. 1/2in square drive.Size: 32mm.
SBS80 Series Metric Sockets featuring the dynamic drive profile, for higher efficiency and an optimum grip without damaging the bolts and nuts. Manufactured from vanadium-extra steel with a nickel and matt chrome plated finish. 1/2in square drive.Size: 27mm.
SBS80 Series Metric Sockets featuring the dynamic drive profile, for higher efficiency and an optimum grip without damaging the bolts and nuts. Manufactured from vanadium-extra steel with a nickel and matt chrome plated finish. 1/2in square drive.Size: 23mm.
SBS80 Series Metric Sockets featuring the dynamic drive profile, for higher efficiency and an optimum grip without damaging the bolts and nuts. Manufactured from vanadium-extra steel with a nickel and matt chrome plated finish. 1/2in square drive.Size: 22mm.
SBS80 Series Metric Sockets featuring the dynamic drive profile, for higher efficiency and an optimum grip without damaging the bolts and nuts. Manufactured from vanadium-extra steel with a nickel and matt chrome plated finish. 1/2in square drive.Size: 18mm.
The Bahco Handled Flat Second Cut File is for the same jobs as the hand file 100, but is sometimes preferred because its tapered shape enables the user to reach into angles and corners more easily. Slightly tapered in width and thickness. Suitable for general work on iron and steel. Double cut on both sides and single cut on both edges.1 x Bahco Handled Flat Second 1-110-08-2-2 Cut File 200mm (8in)
Bahco Handled Flat File 1-110 with soft-grip ERGO™ handle does the same job as hand files but are sometimes preferred because the tapered shape enables the user to reach into angles and corners more easily. Slightly tapered in width and thickness. Suitable for general work on iron and steel. Double cut on both sides and single cut on both edges. Second Cut: Approx 36 teeth per 25mm (Medium).Bastard Cut: Approx 26 teeth per 25mm (Coarse).
Bahco 1-106 series Hand files with Oberg cut are useful for all flat filing. The Oberg cut gives a high removal rate and smooth surface finish on most materials. The edges and surfaces are parallel. Surfaces single cut, bastard, with chipbreaking teeth. One edge single cut.Size 200mm (8in).
Bahco 1-106 series Hand files with Oberg cut are useful for all flat filing. The Oberg cut gives a high removal rate and smooth surface finish on most materials. The edges and surfaces are parallel. Surfaces single cut, bastard, with chipbreaking teeth. One edge single cut.Size 250mm (10in).
The Bahco Handled Hand Cut File 1-100 with a soft grip ERGO™ handle are perfect for filing flat surfaces, sharp corners and shoulders as well as for deburring. A double cut file may also be used for work on high-alloy tool steels. Also useful for the sharpening of heavy implements. High removal rate. Edges and surfaces parallel. Surfaces double cut, one edge uncut, one edge single cut. Second Cut: Approx 36 teeth per 25mm (Medium).Bastard Cut: Approx 26 teeth per 25mm (Coarse).Size 250mm (6in)Cut: hand second.With ergo- grip handle.
The Bahco Handled Hand Cut File 1-100 with a soft grip ERGO™ handle are perfect for filing flat surfaces, sharp corners and shoulders as well as for deburring. A double cut file may also be used for work on high-alloy tool steels. Also useful for the sharpening of heavy implements. High removal rate. Edges and surfaces parallel. Surfaces double cut, one edge uncut, one edge single cut. Second Cut: Approx 36 teeth per 25mm (Medium).Bastard Cut: Approx 26 teeth per 25mm (Coarse).Size 150mm (6in)Cut: hand bastard.With ergo grip handle.
The Bahco Handled Hand Cut File 1-100 with a soft grip ERGO™ handle are perfect for filing flat surfaces, sharp corners and shoulders as well as for deburring. A double cut file may also be used for work on high-alloy tool steels. Also useful for the sharpening of heavy implements. High removal rate. Edges and surfaces parallel. Surfaces double cut, one edge uncut, one edge single cut. Second Cut: Approx 36 teeth per 25mm (Medium).Bastard Cut: Approx 26 teeth per 25mm (Coarse).Size: 200mm (8in)Cut: hand secondWith ergo-grip handle.
The Bahco Handled Hand Cut File 1-100 with a soft grip ERGO™ handle are perfect for filing flat surfaces, sharp corners and shoulders as well as for deburring. A double cut file may also be used for work on high-alloy tool steels. Also useful for the sharpening of heavy implements. High removal rate. Edges and surfaces parallel. Surfaces double cut, one edge uncut, one edge single cut. Second Cut: Approx 36 teeth per 25mm (Medium).Bastard Cut: Approx 26 teeth per 25mm (Coarse).Size: 200mm (8in)Cut: hand bastardWith ergo-grip handle.
The Bahco Handled Hand Cut File 1-100 with a soft grip ERGO™ handle are perfect for filing flat surfaces, sharp corners and shoulders as well as for deburring. A double cut file may also be used for work on high-alloy tool steels. Also useful for the sharpening of heavy implements. High removal rate. Edges and surfaces parallel. Surfaces double cut, one edge uncut, one edge single cut. Second Cut: Approx 36 teeth per 25mm (Medium).Bastard Cut: Approx 26 teeth per 25mm (Coarse).Size 250mm (10in)Cut: hand bastardWith ergo-grip handle.
Tapered half-round cross section allows use on convex and concave surfaces. Suitable for deburring work. The edges and surfaces are tapered towards the point. 4in and 6in files are fully pointed, 8in and longer semi-pointed. Double cut.Size 200mm (8in)Cut: half round second.Tanged.
Tapered half-round cross section allows use on convex and concave surfaces. Suitable for deburring work. The edges and surfaces are tapered towards the point. 4in and 6in files are fully pointed, 8in and longer semi-pointed. Double cut.Size 150mm (6in)Cut: half round second.Tanged.
Tapered half-round cross section allows use on convex and concave surfaces. Suitable for deburring work. The edges and surfaces are tapered towards the point. 4in and 6in files are fully pointed, 8in and longer semi-pointed. Double cut.Size 100mm (4in)Cut: half-round second.Tanged.
Used for working in wood, plastic, plywood, wallboard and other soft materials with edges and surfaces tapered towards point. Coarse cut. Half round.Length: 200mm (8in).Tanged.
Surfaces taper to a point, flat and convex surfaces double cut. For fine filing and polishing jobs. Used by engravers, precision engineers, instrument makers, watchmakers and goldsmiths. Half round.Size: 16cm.Cut: 4 (dead smooth).Type: half round needle file.
