DIY aluminium sprit level with unbreakable, highly transparent and durable block vials with a sensitivity of 10 mm/m and a tolerance of ± 0.75 mm/m in normal position (inverted 1.0 mm/m). The low viscosity vial fluid is a coloured oil mixture giving the bubble the best possible conditions for movement. Resistant to UV light and temperature fluctuations. The bubble is not affected by static electricity as the fluid is anti-static.Length 400mm (16 in).
DIY aluminium sprit level with unbreakable, highly transparent and durable block vials with a sensitivity of 10 mm/m and a tolerance of ± 0.75 mm/m in normal position (inverted 1.0 mm/m). The low viscosity vial fluid is a coloured oil mixture giving the bubble the best possible conditions for movement. Resistant to UV light and temperature fluctuations. The bubble is not affected by static electricity as the fluid is anti-static.Length 600mm (24 in)
DIY aluminium sprit level with unbreakable, highly transparent and durable block vials with a sensitivity of 10 mm/m and a tolerance of ± 0.75 mm/m in normal position (inverted 1.0 mm/m). The low viscosity vial fluid is a coloured oil mixture giving the bubble the best possible conditions for movement. Resistant to UV light and temperature fluctuations. The bubble is not affected by static electricity as the fluid is anti-static.Length 800mm (32 in)
The T Block Combi Hammer is an ergonomically designed hammer that increases precision and reduces strain. The head is filled with small steel bearings to cushion the shock and reduce recoil, the shaft is made from steel with an ergonomically designed rubber grip. The counterweight in the handle impedes rotation, thus improving balance and control of the hammer.1 x Hultafors Small T Block Combi Deadblow Hammer 238g (0.5lb)
The Hultafors HULSMV20 Bevel square with stainless steel blade and aluminium stock has milled working surfaces for the copying and transfer of angles to work pieces. The square has a screw for locking blade at end of stock for improved accessibility and is 200mm in length.
A Hultafors Spare Dvardala Axe Handle. Increase the life span for your axe by changing the handle when needed. Made from American hickory, treated with linseed oil.
The Hultafors SPP 18A Auto-Lock Snap-Off Knife made for all-round use such as cutting plastic, paperboard and stripping cables. Its 1mm thick metal rail blade provides additional stability. Specifications: Total Length: 157mm.Blade Width: 18mm.Blade Length: 100mm.
The Hultafors SPP 18W Snap-Off Knife made for all-round use such as cutting plastic, paperboard and stripping cables. Specifications: Total Length: 157mm.Blade Width: 18mm.Blade Length: 100mm.
The Hultafors SPP 25A Auto-Lock Snap-Off Knife made for cutting thick carpets or insulation. Its 1mm thick metal rail blade provides additional stability. Specifications: Total Length: 157mm.Blade Width: 18mm.Blade Length: 100mm.
The Hultafors SPP 18W Snap-Off Knife made for all-round use such as cutting plastic, paperboard and stripping cables. Specifications: Total Length: 157mm.Blade Width: 18mm.Blade Length: 100mm.
The Hultafors SRP 18A Auto Lock Snap-Off Knife has an ergonomic rubberised grip. Its symmetric design allows for both right and left-handed usage. Tapered for better visibility, access and control. Made of durable plastic with a steel core and a 1mm (0.039in) thick metal blade rail for greater stability. Additionally, the knife can hold a dispenser with 3 spare blades. Ideal for all-round use such as cutting drywall, insulation and wood.
The Hultafors SRP 18W Snap-Off Knife is made of durable PC-plastic (polycarbonate) with a steel core for added stability. It is tapered for better visibility, access and control. It also has an ergonomic, rubberised grip and a 1mm thick metal blade rail for additional stability. Suitable for all-round use such as cutting plasterboard, insulation, aqua panel and wood. It comes with 4 blades, 1 in the blade rail and the extra 3 in the dispenser that the knife holds.
The Hultafors SRP 25A Snap-Off Knife is made of durable PC-plastic (polycarbonate) with a steel core for added stability. A 1mm thick metal blade rail provides additional stability. Ideal for cutting thick carpets or insulation.The symmetric design for right and left-handed usage and is fitted with a rubberised grip for improved comfort and control. Tapered for better visibility, access and control. Use the angled tip as a guide for measuring 45 degree and 90 degree.It comes with 4 blades, 1 in the blade rail and the extra 3 in the dispenser the knife holds. Specifications: Total Length: 186mm.Blade Width: 25mm.Blade Length: 125mm.
The Hultafors ST30/15 Satellite Tape has a 10mm ‘Matt Coat’ polyester coated steel blade that has graduations in both metric and imperial. Fitted with a unique triple action end-loop and fold-in claw that enables the tape to be anchored into or over a wide variety of objects and surfaces. With a closed case design that protects the blade and internal workings with a hard-wearing, high-impact ABS case, ultrasonically welded for added strength, that fits comfortably into the palm of your hand. Rewinding is made easy and comfortable with the sturdy winding handle and rotating winding knob, which can then be stored neatly back into the centre of the tape. There is also an ABS belt clip moulded on to the rear of the case. Made in Britain. Specification: Length: 30m/100ftBlade Width: 10mmAccuracy: EC Class II
Steel scale in hardened stainless steel with matt chrome-plated surface for anti-glare reading. Graduated in millimetres along the upper edge, and half millimetres on lower edge. The reverse side is blank. Manufactured in hardened stainless steel for extra durability, graduated in millimetres on the upper edge, half millimetres on the lower edge and decimetre figures in red with a tolerance ± 0.3mmLength: 1000mm (39 in)Width: 35mmThickness: 1.5mm
Steel scale in hardened stainless steel with matt chrome-plated surface for anti-glare reading. Graduated in millimetres along the upper edge, and half millimetres on lower edge. The reverse side is blank. Manufactured in hardened stainless steel for extra durability, graduated in millimetres on the upper edge, half millimetres on the lower edge and decimetre figures in red with a tolerance ± 0.3mmLength: 600mm (24 in) Width: 28.5mmThickness: 1.2mm
The Hultafors STFS Non-Rebound Hammer has a striking head filled with damping steel balls that dampen vibrations and reduce recoil. The nylon strikers are gentle on workpieces. It has a steel shaft with an ergonomic Santoprene rubber handle.Hultafors STFS30 Non-Rebound Hammer
The Hultafors STFS Non-Rebound Hammer has a striking head filled with damping steel balls that dampen vibrations and reduce recoil. The nylon strikers are gentle on workpieces. It has a steel shaft with an ergonomic Santoprene rubber handle.Hultafors STFS40 Non-Rebound Hammer
The Hultafors STFS Non-Rebound Hammer has a striking head filled with damping steel balls that dampen vibrations and reduce recoil. The nylon strikers are gentle on workpieces. It has a steel shaft with an ergonomic Santoprene rubber handle.Hultafors STFS50 Non-Rebound Hammer
Hultafors STL Ruler, comes in tempered stainless steel, and has a matt chromeplated surface for anti-glare reading. The ruler is graduated in millimetres along the upper edge and half-millimetres along the lower edge. The reverse side is blank. Specification:Tolerance: ±0.3 mm/m.The Hultafors STL 150 Ruler, comes in tempered stainless steel, and has a matt chromeplated surface for anti-glare reading. The ruler is graduated in millimetres along the upper edge and half-millimetres along the lower edge. The reverse side is blank, the ruler is both metric and imperial. Specification: Size: 150mm (6in).Tolerance: ±0.3 mm/m
Hultafors STL Ruler, comes in tempered stainless steel, and has a matt chromeplated surface for anti-glare reading. The ruler is graduated in millimetres along the upper edge and half-millimetres along the lower edge. The reverse side is blank. Specification:Tolerance: ±0.3 mm/m.This Hultafors STL 300 Ruler comes in tempered stainless steel, and has a matt chromeplated surface for anti-glare for more accurate reading. The ruler is graduated in millimetres along the upper edge and half-millimetres along the lower edge. The reverse side is blank. (Metric and Imperial). Specification: Size: 300mm (12in).Tolerance: ±0.3 mm/m.
The Hultafors Stubby Slotted Screwdriver measuring 6.5 x 25mm is made for professional use, developed together with craftsmen. The blade is manufactured from high-quality hardened steel for long life. Fitted with a durable PPC plastic handle with a coating of age-resistant and easy-to-grip rubber. This long rubber-coated handle ensures grip for precision and maximal transmission of power. Permanent marking of type and size on the top as well as the handle’s colour make it easy for the user to select the right screwdriver. The handle’s design prevents the screwdriver from rolling on inclined surfaces. There is also a hole in the handle for hanging or securing.
The T block ball pein hammer is an ergonomically designed hammer that increases precision and reduces strain. The head is filled with small steel bearings to cushion the shock and reduce recoil. The counterweight in the handle impedes rotation, thus improving balance and control of the hammer.1 x Hulfafors T Block Ball Pein Hammer Large
The T block ball pein hammer is an ergonomically designed hammer that increases precision and reduces strain. The head is filled with small steel bearings to cushion the shock and reduce recoil. The counterweight in the handle impedes rotation, thus improving balance and control of the hammer.1 x Hulfafors T Block Ball Pein Hammer Medium
The Hulfafors Talmeter is a unique marking and measuring tool. Hard-wearing steel tape, that is scaled in millimetres, with ABS plastic casing. Combined measuring and marking edges that quickly and easily measure and mark both external and internal lengths. The tape and extender can be replaced and are available as spare parts. The tape also measure diameters using the scale on the reverse of the tape and it also has a compass function which is useful when marking round shapes. The scale is always locked in normal position and the extender is easy to open out and retract with the easy-to-hold sliding carriage. USING THE MARKING MEASURE. With a marking measure, you do not need to convert the measurements you have taken into units of measurement. Instead, all there is to it, is to fit in the combined marking and measuring edges between the measurement points on the object being measured. The scale is automatically fixed at this length and with the help of the same measuring and marking edges, you can then etch the length on to the work-piece. You can do it once or several times and with unwavering precision. You do not even need to see properly in order to make exact measurements and markings.Hulfafors Talmeter Marking Measure Tape. Tape Length: 3 Metre. Tape Width: 16mm.
The Hulfafors Talmeter is a unique marking and measuring tool. Hard-wearing steel tape, that is scaled in millimetres, with ABS plastic casing. Combined measuring and marking edges that quickly and easily measure and mark both external and internal lengths. The tape and extender can be replaced and are available as spare parts. The tape also measure diameters using the scale on the reverse of the tape and it also has a compass function which is useful when marking round shapes. The scale is always locked in normal position and the extender is easy to open out and retract with the easy-to-hold sliding carriage. USING THE MARKING MEASURE. With a marking measure, you do not need to convert the measurements you have taken into units of measurement. Instead, all there is to it, is to fit in the combined marking and measuring edges between the measurement points on the object being measured. The scale is automatically fixed at this length and with the help of the same measuring and marking edges, you can then etch the length on to the work-piece. You can do it once or several times and with unwavering precision. You do not even need to see properly in order to make exact measurements and markings.Hulfafors Talmeter Marking Measure Tape. Tape Length: 6 Metre. Tape Width: 25mm.
The Hultafors Talmeter Tapes Display Tray is supplied with 12 x Talmeter Tapes 3m (Width 16mm). The Talmeter is a unique marking and measuring tool. It is a hard-wearing steel tape, that is scaled in millimetres, with an ABS plastic casing. With combined measuring and marking edges that quickly and easily measure and mark both external and internal lengths. The tape and extender can be replaced and are available as spare parts. It can also measure diameters using the scale on the reverse of the tape. It also has a compass function which is useful when marking round shapes.
The Hultafors TB600 Bricklayer's Hammer has an ergonomic design that has been forged as one piece for increased durability with a vibration damping urethane plug. The steel shaft with I-beam provides increased durability. It is fitted with a tempered square striking face and a strong ground chisel with a notch for pulling out nails. The right angle and shape of chisel for safe splitting of bricks. The handle is fitted with a distinct end stop to ensure a secure grip and has a rubber cover to provide a comfortable grip.
The Hultafors TC Curved Claw Hammer is forged in one piece for increased durability. Fitted with a vibration damping urethane plug. The thin, strong claw provides easy access without leaving marks. In addition, it is rounded to prevent it tearing your trousers. Ergonomically designed handle with clear end stop and a secure grip.
