The Hultafors RKR GH Rope Knife is fitted with a friction grip and serrated blade made from 2.0mm stainless steel that has been hardened to 57–59 HRC. The cutting edge has been sharpened in several stages and 60mm of the blade is serrated to increase cutting power. It has been optimised for cutting through hard or tough surfaces as well as ropes and strapping band, especially where tension to the material is applied. The handle is made from super-durable PP plastic and fitted with a Santoprene friction grip. Supplied with a holster that can be attached around a button on your work clothes so that it does not come loose whilst still being easy to remove. Blade Length: 93mm.Overall Length: 209mm.This Hultafors RKR GH Rope Knife is supplied carded.
The Hultafors RL Chalk Line Reel 50m is made from hard and durable polystyrene plastic. With an extra strong cord ideal for demanding outdoor work. The line is 3mm in diameter and has a rupture limit of 55kg. No messy pouring of chalk, the bottle slots into the chalk line reel. Holds 700g of chalk, including a standard bottle.
This Hultafors RN30/79 Ranger Tape has both metric and imperial measurements. Blade Length: 30m/100ftBlade Width: 13mmAccuracy: EC Class II The Hultafors Ranger Tape is a heavy-duty, open frame surveyor's tape with a spade handle grip, which is ultrasonically welded for added strength. It has a PVC overcoated, fibreglass blade that is electronically non-conductive when dry, corrosion-resistant and resistant to breakage. Features both metric and imperial measurements. The twin mouth rollers, low friction centre bearing, long winding lever and easy-grip winding handle, all ensure that a smooth and effective rewind is achieved. Its long winding lever and easy grip knob make rewinding easier and faster. There is also a corrosion-resistant end-piece. Made in Britain.
The Hultafors Ranger Tape is a heavy-duty, open frame surveyor's tape with a spade handle grip, which is ultrasonically welded for added strength. It has a PVC overcoated fibreglass blade that is electronically non-conductive when dry, corrosion resistant and resistant to breakage. Features both metric and imperial measurements. The twin mouth rollers, low friction centre bearing, long winding lever and easy-grip winding handle, all ensure that a smooth and effective rewind is achieved. Its long winding lever and easy grip knob make rewinding easier and faster. There is also a corrosion resistant end-piece. Accuracy: EC Class IIMade in Britain
This Hultafors Square has been developed to be both light and durable. Ideal for anyone who often carries a square in their pocket. There is also a hole for attaching the tool to a safety lanyard or for wall hanging. Its precision cut blade and riveting have very small tolerances to provide high precision; angle tolerance ±0.06° (±1 mm/m). The millimeter graduations have been laser etched with very high contrast and abrasion resistance. The blade is 45mm wide to accommodate work with standard stud dimensions. Custom made riveting and a 1mm thick high-strength stainless steel blade increase durability, ideal for tough working environments. Made in Europe with full control over working conditions and sustainability. 1 x Hultafors S20L Lightweight Square 20cm.
This Hultafors Square has been built for precision and durability. Excellent for construction, workshops and carpentry work. Unique assembly technology with strong custom riveting and a 1.5mm thick high-strength stainless steel blade. This provides an extremely durable design which can withstand tough working environments and will last a long time. The stock is made of fully anodized aluminum with a 18mm thick handle. Its high strength stainless steel blade is 45mm wide and 1.5mm thick. This accommodates work with standard stud dimensions and a center line makes it easy to quickly mark out both sides of a stud. It also has scribing notches spaced 5mm apart, these can be used to draw or cut a line parallel along an edge. The precision cut blade and riveting have very small tolerances to provide high precision; angle tolerance ±0.03° (±0.5 mm/m). Made in Europe with full control over working conditions and sustainability. 1 x Hultafors S20P Professional Square 20cm.
This Hultafors Square has been developed to be both light and durable. Ideal for anyone who often carries a square in their pocket. There is also a hole for attaching the tool to a safety lanyard or for wall hanging. Its precision cut blade and riveting have very small tolerances to provide high precision; angle tolerance ±0.06° (±1 mm/m). The millimeter graduations have been laser etched with very high contrast and abrasion resistance. The blade is 45mm wide to accommodate work with standard stud dimensions. Custom made riveting and a 1mm thick high-strength stainless steel blade increase durability, ideal for tough working environments. Made in Europe with full control over working conditions and sustainability. 1 x Hultafors S25L Lightweight Square 25cm.
This Hultafors Square has been built for precision and durability. Excellent for construction, workshops and carpentry work. Unique assembly technology with strong custom riveting and a 1.5mm thick high-strength stainless steel blade. This provides an extremely durable design which can withstand tough working environments and will last a long time. The stock is made of fully anodized aluminum with a 18mm thick handle. Its high strength stainless steel blade is 45mm wide and 1.5mm thick. This accommodates work with standard stud dimensions and a center line makes it easy to quickly mark out both sides of a stud. It also has scribing notches spaced 5mm apart, these can be used to draw or cut a line parallel along an edge. The precision cut blade and riveting have very small tolerances to provide high precision; angle tolerance ±0.03° (±0.5 mm/m). Made in Europe with full control over working conditions and sustainability. 1 x Hultafors S25P Square Professional 25cm.
This Hultafors Square has been developed to be both light and durable. Ideal for anyone who often carries a square in their pocket. There is also a hole for attaching the tool to a safety lanyard or for wall hanging. Its precision cut blade and riveting have very small tolerances to provide high precision; angle tolerance ±0.06° (±1 mm/m). The millimeter graduations have been laser etched with very high contrast and abrasion resistance. The blade is 45mm wide to accommodate work with standard stud dimensions. Custom made riveting and a 1mm thick high-strength stainless steel blade increase durability, ideal for tough working environments. Made in Europe with full control over working conditions and sustainability. 1 x Hultafors S30L Lightweight Square 30cm.
This Hultafors Square has been built for precision and durability. Excellent for construction, workshops and carpentry work. Unique assembly technology with strong custom riveting and a 1.5mm thick high-strength stainless steel blade. This provides an extremely durable design which can withstand tough working environments and will last a long time. The stock is made of fully anodized aluminum with a 18mm thick handle. Its high strength stainless steel blade is 45mm wide and 1.5mm thick. This accommodates work with standard stud dimensions and a center line makes it easy to quickly mark out both sides of a stud. It also has scribing notches spaced 5mm apart, these can be used to draw or cut a line parallel along an edge. The precision cut blade and riveting have very small tolerances to provide high precision; angle tolerance ±0.03° (±0.5 mm/m). Made in Europe with full control over working conditions and sustainability. 1 x Hultafors S30P Square Professional 30cm.
This Hultafors Safety Knife is a dull pointed knife designed to minimise sticking injuries. The knife blade is made from 2.5mm Japanese knife carbon steel that has been hardened to 58-60 HRC and the cutting edge has been sharpened in several stages with a final honing on a leather strop. The handle and supplied holster are made of extra durable PP plastic. A unique method for attaching the holster around a button on work clothes means it does not loosen, but is easy to remove. Blade Length: 88mm.Overall Length: 203mm.Supplied loose.
Hultafors Set of 5 Scandinavian Butt Chisels which are ready for tough precision and all-round use, from adjusting and fitting to prying and demolishing. The chisel has a perfectly sharpened high-quality Japanese steel blade with heavy-duty handle designed for hard hammer blows. The blade is rust protected by Electrophoretic Deposition (EPD). They are an everyday chisel, sharp, reliable and always at hand. Comes with one of each size: 32mm, 25mm, 18mm, 12mm and 6mm. Each chisel is supplied in a ventilated ABS holster to protect the user and cutting edge during transportation.
The Hultafors 6 Piece Screwdriver Set made for professional use, developed together with craftsmen. The blade is manufactured from high-quality hardened steel for long life. Fitted with a durable PPC plastic handle with a coating of age-resistant and easy-to-grip rubber. This long rubber-coated handle ensures grip for precision and maximal transmission of power. Permanent marking of type and size on the top as well as the handle’s colour make it easy for the user to select the right screwdriver. The handle’s design prevents the screwdriver from rolling on inclined surfaces. There is also a hole in the handle for hanging or securing. Contains the following: 2 x Phillips Screwdrivers: PH1 x 80mm & PH2 x 100mm. 2 x Pozidriv Screwdrivers: PZ1 x 80mm & PZ2 x 100mm. 4 x Slotted Screwdrivers: 4.0 x 100mm & 5.5 x 125mm.
Square with fibreglass reinforced ABS plastic stock and millimetre scale along the top and bottom edge of the blade. Stainless steel blade measuring 20 cm x 1.0 mm x 45 mm which has a deep-etched, extremely hard-wearing scale.The stock is made of fibreglass reinforced ABS plastic with an 18 mm wide milled working surface.
The Hultafors Spirit Level Bag protects your spirit level during transport and storage. Its padded construction keeps your level protected from accidental bumps and drops during transport and storage. It also helps to prolong the lifespan of your spirit level.
1 x Hultafors Short Spirit Level BagSpecification:Dimensions: 68 x 18 x 4cm
This Hultafors PRSS Short Tape has a polyester coated stainless-steel blade and a stainless-steel spring, and is made for work in wet environments. The tape is graduated using highly accurate inkjet printing to give you optimal contrast, and precision when measuring. It comes with a smooth blade return action and bump-stop with an anti-wear function protecting the blade and end-hook. The end-hook adjusts itself for internal measuring, while the casing is made from high impact ABS plastics, rubber-coated for a better grip and impact resistance. Type approved according to EU Class I.Hultafors Short Stainless Steel Tape PRSS 4m has a polyester coated stainless-steel blade and a stainless-steel spring, and is made for work in wet environments. The tape is graduated using highly accurate inkjet printing to give you optimal contrast, and precision when measuring. It comes with a smooth blade return action and bump-stop with an anti-wear function protecting the blade and end-hook. The end-hook adjusts itself for internal measuring, while the casing is made from high impact ABS plastics, rubber-coated for a better grip and impact resistance. It comes with a metal belt clip. Type approved according to EU Class I. Specifications: Blade Length: 4m. (Metric only).Blade Width: 19mm.
This Hultafors PRSS Short Tape has a polyester coated stainless-steel blade and a stainless-steel spring, and is made for work in wet environments. The tape is graduated using highly accurate inkjet printing to give you optimal contrast, and precision when measuring. It comes with a smooth blade return action and bump-stop with an anti-wear function protecting the blade and end-hook. The end-hook adjusts itself for internal measuring, while the casing is made from high impact ABS plastics, rubber-coated for a better grip and impact resistance. Type approved according to EU Class I.The Hultafors 350503 Short Stainless Steel Tape PRSS measures up to 6m with a detachable belt clip, 2m longer than the GRPHUL350403. The tape has a polyester coated stainless-steel blade and a stainless-steel spring, and is made for work in wet environments. The tape is graduated using highly accurate inkjet printing to give you optimal contrast, and precision when measuring. It comes with a smooth blade return action and bump-stop with an anti-wear function protecting the blade and end-hook. The end hook adjusts itself for internal measuring, while the casing is made from high impact ABS plastics, rubber-coated for a better grip and impact resistance. Its's quick-release function makes it easier to release the 25mm wide tape with one hand. The tape is metric only, and is type approved according to EU Class I. Specifications: Size: 25mm x 6m.
The Hultafors SKR Safety Knife has a dull point, developed and adapted to minimise sticking injuries. Its blade is made from German knife steel, 2.5mm stainless steel which has been hardened to 57–59 HRC. Both the handle and holster are made from super-durable PP plastic. The holster can be attached to both a belt and a button on your work clothes. If your belt is thick, cut away the small pin on the cover.
This Hultafors Short Tape has a yellow, polyester coated steel blade, graduated using wear resistant ink jet print. It is fitted with a strong stainless steel end piece and reinforcement plate. Its smooth blade return action, and bump stop with anti-wear function further increase blade durability. If needed, the blade can be replaced. Its slim case is made from durable, high impact ABS plastic, with a metal hole hanger for a strap, enabling safe work at heights. The short tape has a distinct brake that causes no blade movement. Type approved as per EU Class I.This Stanley Hultafors SL3ME Short Tape Steel SL has a yellow, polyester coated steel blade, graduated using wear resistant ink jet print. It is fitted with a strong stainless steel end piece and reinforcement plate. Its smooth blade return action, and bump stop with anti-wear function further increase blade durability. If needed, the blade can be replaced. Its slim case is made from durable, high impact ABS plastic, with a metal hole hanger for a strap, enabling safe work at heights. The short tape has a distinct brake that causes no blade movement. Type approved as per EU Class I. The SL3ME has metric and imperial graduations. Specification:Blade Length: 3m/10ft.Blade Width: 16mm.Accuracy: Class I.
This Hultafors Short Tape has a yellow, polyester coated steel blade, graduated using wear resistant ink jet print. It is fitted with a strong stainless steel end piece and reinforcement plate. Its smooth blade return action, and bump stop with anti-wear function further increase blade durability. If needed, the blade can be replaced. Its slim case is made from durable, high impact ABS plastic, with a metal hole hanger for a strap, enabling safe work at heights. The short tape has a distinct brake that causes no blade movement. Type approved as per EU Class I.This Hultafors SL5ME Short Tape has a yellow, polyester coated steel blade, graduated using wear resistant ink jet print. Fitted with a strong stainless steel end piece and reinforcement plate. Its smooth blade return action, and bump stop with anti-wear function further increase blade durability. If needed, the blade can be replaced. Its slim case is made from durable, high impact ABS plastic, with a metal hole hanger for a strap, enabling safe work at heights. The short tape has a distinct brake that causes no blade movement. Type approved as per EU Class I. Has both metric and imperial graduations. Specification:Blade Length: 5m/16ft.Blade Width: 19mm.Accuracy: Class I.
The Hultafors Sliding Bevel offers multiple smart features. The 20cm blade includes a durable, laser-etched millimetre scale and angle markings (0-90°) on both sides. The pointed end has a scribing notch, while the other end features a flattened edge, both designed for easy transfer of length measurements with a knife or pencil. The flat edge also includes its own length scale for depth measurements.Our sliding bevel features a unique, extra-strong locking mechanism at the end of the stock. The ergonomically designed knob ensures a reliable lock when transferring the measured angle or length between workpieces.The construction is robust yet compact, making it easy to fit in a tool pocket. The laser-cut blade is made of stainless steel, and the stock is made of certified anodized aluminium, which has a CO2 footprint that is only a quarter of the global average. Manufacturing takes place in Europe.
DIY aluminium sprit level with unbreakable, highly transparent and durable block vials with a sensitivity of 10 mm/m and a tolerance of ± 0.75 mm/m in normal position (inverted 1.0 mm/m). The low viscosity vial fluid is a coloured oil mixture giving the bubble the best possible conditions for movement. Resistant to UV light and temperature fluctuations. The bubble is not affected by static electricity as the fluid is anti-static.Length 1000mm (40 in)
DIY aluminium sprit level with unbreakable, highly transparent and durable block vials with a sensitivity of 10 mm/m and a tolerance of ± 0.75 mm/m in normal position (inverted 1.0 mm/m). The low viscosity vial fluid is a coloured oil mixture giving the bubble the best possible conditions for movement. Resistant to UV light and temperature fluctuations. The bubble is not affected by static electricity as the fluid is anti-static.Length 1200mm (48 in)
DIY aluminium sprit level with unbreakable, highly transparent and durable block vials with a sensitivity of 10 mm/m and a tolerance of ± 0.75 mm/m in normal position (inverted 1.0 mm/m). The low viscosity vial fluid is a coloured oil mixture giving the bubble the best possible conditions for movement. Resistant to UV light and temperature fluctuations. The bubble is not affected by static electricity as the fluid is anti-static.Length 1500mm (60 in)
DIY aluminium sprit level with unbreakable, highly transparent and durable block vials with a sensitivity of 10 mm/m and a tolerance of ± 0.75 mm/m in normal position (inverted 1.0 mm/m). The low viscosity vial fluid is a coloured oil mixture giving the bubble the best possible conditions for movement. Resistant to UV light and temperature fluctuations. The bubble is not affected by static electricity as the fluid is anti-static.Length 1800mm (72 in)
DIY aluminium sprit level with unbreakable, highly transparent and durable block vials with a sensitivity of 10 mm/m and a tolerance of ± 0.75 mm/m in normal position (inverted 1.0 mm/m). The low viscosity vial fluid is a coloured oil mixture giving the bubble the best possible conditions for movement. Resistant to UV light and temperature fluctuations. The bubble is not affected by static electricity as the fluid is anti-static.Length 300mm (12 in)
