Consort Claudgen SLPIR Motion-Activated Runback Timer Overview
The Consort Claudgen SLPIR motion-activated runback timer is a part of an electric heater control system that allows your heater to increase the room temperature, from up to five metres away.
If the motion detector triggered by a predetermined time, then the heater will either switch off or the temperature will be held at a lower background level.
This motion-activated runback timer can provides heating control for multiple SL heaters or SL receivers within the RF signal range.
Key Features
Controller acts as a run-back timer where a full heating period is activated when the controller detects movement
Warranty: 1 year
Max. motion sensor range: 5m
Detection area: 60 degrees vertical, 120 degrees horizontal
Choice of 4 time periods: 5, 15, 30 and 60 minutes
Comfort heat setting between 15�C and 35�C
Controls multiple SL heaters or SL receivers within the RF signal range
Fits onto most standard single gang box
4 segment light indicator, which counts down the time
SLVT Wireless Controller (Run-back Timer and Adjustable Thermostat)
In addition to the run-back timer function, the SLVT offers temperature control and an easy-to-read digital display showing the room temperature.
The SLVT has four status indicators and two operating modes which are set prior to the controller�s installation. It offers temperature control where users can set their comfort temperature using either one of the temperature control buttons, however, they cannot increased it beyond the maximum comfort temperature set by the building owners or operators. In Temperature and Timer mode, it acts as a 4-stage run-back timer where the heating period will be active until the run-back timer expires. There is a choice of three time periods available: 5, 15 or 30 minutes. When the button is pressed four times, this takes the run-back time period to 20, 60 or 120 minutes. In Temperature Control mode, it features temperature control for comfort and setback periods.
Can operate multiple SL heaters
Display screen shows actual room temperature, except briefly when either of the two control buttons are pressed, the new target room temperature is then temporarily displayed
Can set display for either Celsius or Fahrenheit
Can set maximum comfort temperature
Variable comfort control for user to adjust the room temperature below the maximum comfort temperature
2 operating modes:
� Temperature and Timer Control: Controller acts as a 4 stage run-back timer where heating period will be active until run-back timer expires. Target room temperature can be set using the temperature control buttons.
� Temperature Control: Features temperature control for comfort and setback periods.
Choice of 3 time periods in Timer mode: 5, 15 or 30 minutes
Comfort temperature will maintain the set room temperature
Setback temperatures can be used for frost protection or maintaining a minimum room temperature
4 light indicators around the button to show the status of the controller
Easy operation
Fits onto any standard single gang box
External input available to connect to any voltage free contact such as timers or BMS
Can be powered by either mains 240V or 12VDC which allows SELV (Separated Extra Low Voltage) installation*
* Power adapter not supplied
SLVT�s Operating Modes
In Temperature and Timer mode, it acts as a 4-stage run-back timer where the heating period will be active until the run-back timer expires. There is a choice of three time periods available: 5, 15 or 30 minutes. When the button is pressed four times, this takes the run-back time period to 20, 60 or 120 minutes. Target room temperature can be set using the temperature control buttons.
In Temperature Control mode, it features temperature control for comfort and setback periods which can also be used in conjunction with the Timer mode.
Screenzone Commercial Recessed Air Curtains
Designed to fit above a doorway in a suspended ceiling, the Screenzone recessed air curtains provides a discreet welcoming curtain of warmth for doorways in shops, hotels, offices and commercial premises. Overall energy savings are likely when the heater is sited above a frequently opened external door as the airstream can prevent heat loss.
RAC0603, RAC0604 & RAC1006
3kW, 4.5kW or 6kW rating.
Single phase models.
Will fit a recess as shallow as 210mm (155mm unit depth plus 55mm free air).
Supplied with remote switch HE8407.
3 heat settings.
Fan only setting for air circulation.
Automatic safety cut-out for thermal overload protection.
Supplied with white grille.
RAC1306, RAC1309, RAC1312, RAC1509, RAC1512, RAC1514 & RAC1516
6kW, 9kW, 12kW, 14kW or 16kW rating
Will fit a recess as shallow as 230mm (175mm unit depth plus 55mm free air)
Energy efficient brushless motor.
Supplied with HE8408 remote switch.
Multiple heaters can be controlled from one switch.
Optional ACMC (Air Curtain Master Controller) and ACTS (Air Curtain Temperature Sensor) available.
ACTS must be used in conjunction with ACMC.
2 heat settings, 2 fan speeds with remote switch.
8 heat settings, 8 fan speeds with optional ACMC.
Fan only setting for air circulation.
Automatic safety cut-out for thermal overload protection.
Safety monitoring feature: This feature will detect and display the nature of the fault on the display screen on ACMC controller. If ACMC controller is not used, the LED indicator light located under the heater cover will flash indicating the nature of the fault.
Compatible with Building Management Systems.
Finished in white.
Screenzone Commercial Recessed Air Curtains
Designed to fit above a doorway in a suspended ceiling, the Screenzone recessed air curtains provides a discreet welcoming curtain of warmth for doorways in shops, hotels, offices and commercial premises. Overall energy savings are likely when the heater is sited above a frequently opened external door as the airstream can prevent heat loss.
RAC0603, RAC0604 & RAC1006
3kW, 4.5kW or 6kW rating.
Single phase models.
Will fit a recess as shallow as 210mm (155mm unit depth plus 55mm free air).
Supplied with remote switch HE8407.
3 heat settings.
Fan only setting for air circulation.
Automatic safety cut-out for thermal overload protection.
Supplied with white grille.
RAC1306, RAC1309, RAC1312, RAC1509, RAC1512, RAC1514 & RAC1516
6kW, 9kW, 12kW, 14kW or 16kW rating
Will fit a recess as shallow as 230mm (175mm unit depth plus 55mm free air)
Energy efficient brushless motor.
Supplied with HE8408 remote switch.
Multiple heaters can be controlled from one switch.
Optional ACMC (Air Curtain Master Controller) and ACTS (Air Curtain Temperature Sensor) available.
ACTS must be used in conjunction with ACMC.
2 heat settings, 2 fan speeds with remote switch.
8 heat settings, 8 fan speeds with optional ACMC.
Fan only setting for air circulation.
Automatic safety cut-out for thermal overload protection.
Safety monitoring feature: This feature will detect and display the nature of the fault on the display screen on ACMC controller. If ACMC controller is not used, the LED indicator light located under the heater cover will flash indicating the nature of the fault.
Compatible with Building Management Systems.
Finished in white.
Screenzone Commercial Recessed Air Curtains
Designed to fit above a doorway in a suspended ceiling, the Screenzone recessed air curtains provides a discreet welcoming curtain of warmth for doorways in shops, hotels, offices and commercial premises. Overall energy savings are likely when the heater is sited above a frequently opened external door as the airstream can prevent heat loss.
RAC0603, RAC0604 & RAC1006
3kW, 4.5kW or 6kW rating.
Single phase models.
Will fit a recess as shallow as 210mm (155mm unit depth plus 55mm free air).
Supplied with remote switch HE8407.
3 heat settings.
Fan only setting for air circulation.
Automatic safety cut-out for thermal overload protection.
Supplied with white grille.
RAC1306, RAC1309, RAC1312, RAC1509, RAC1512, RAC1514 & RAC1516
6kW, 9kW, 12kW, 14kW or 16kW rating
Will fit a recess as shallow as 230mm (175mm unit depth plus 55mm free air)
Energy efficient brushless motor.
Supplied with HE8408 remote switch.
Multiple heaters can be controlled from one switch.
Optional ACMC (Air Curtain Master Controller) and ACTS (Air Curtain Temperature Sensor) available.
ACTS must be used in conjunction with ACMC.
2 heat settings, 2 fan speeds with remote switch.
8 heat settings, 8 fan speeds with optional ACMC.
Fan only setting for air circulation.
Automatic safety cut-out for thermal overload protection.
Safety monitoring feature: This feature will detect and display the nature of the fault on the display screen on ACMC controller. If ACMC controller is not used, the LED indicator light located under the heater cover will flash indicating the nature of the fault.
Compatible with Building Management Systems.
Finished in white.
Screenzone Commercial Recessed Air Curtains
Designed to fit above a doorway in a suspended ceiling, the Screenzone recessed air curtains provides a discreet welcoming curtain of warmth for doorways in shops, hotels, offices and commercial premises. Overall energy savings are likely when the heater is sited above a frequently opened external door as the airstream can prevent heat loss.
RAC0603, RAC0604 & RAC1006
3kW, 4.5kW or 6kW rating.
Single phase models.
Will fit a recess as shallow as 210mm (155mm unit depth plus 55mm free air).
Supplied with remote switch HE8407.
3 heat settings.
Fan only setting for air circulation.
Automatic safety cut-out for thermal overload protection.
Supplied with white grille.
RAC1306, RAC1309, RAC1312, RAC1509, RAC1512, RAC1514 & RAC1516
6kW, 9kW, 12kW, 14kW or 16kW rating
Will fit a recess as shallow as 230mm (175mm unit depth plus 55mm free air)
Energy efficient brushless motor.
Supplied with HE8408 remote switch.
Multiple heaters can be controlled from one switch.
Optional ACMC (Air Curtain Master Controller) and ACTS (Air Curtain Temperature Sensor) available.
ACTS must be used in conjunction with ACMC.
2 heat settings, 2 fan speeds with remote switch.
8 heat settings, 8 fan speeds with optional ACMC.
Fan only setting for air circulation.
Automatic safety cut-out for thermal overload protection.
Safety monitoring feature: This feature will detect and display the nature of the fault on the display screen on ACMC controller. If ACMC controller is not used, the LED indicator light located under the heater cover will flash indicating the nature of the fault.
Compatible with Building Management Systems.
Finished in white.
Surface ceiling fan heaters are suitable for supermarket and showroom areas or where heat is required locally. They are designed to be suspended via its integral anchorage points and with a completely enclosed housing ensuring ease of installation. Recessed ceiling heaters are designed for discreet positioning in a suspended 600mm standard ceiling panel. They are ideal to heat areas where wall and floor space is at a premium such as shops and offices.
RX Ceiling Fan Heaters
3kW, 4.5kW or 6kW rating
Compatible with advanced single zone controllers*
Fan only setting for air circulation
Wider operation range
Quiet operation
Sealed heater box for improved energy efficiency
Will fit shallow 210mm recess
Safety monitoring feature: The light on the heater will flash indicating the nature of the fault
LED indicator light
SL Ceiling Fan Heaters
3kW, 4.5kW or 6kW rating
Compatible with any Consort wireless controller
Quiet operation
Sealed heater box for improved energy efficiency
Will fit shallow 210mm recess
LED indicator light
* Advanced single zone controllers: CRXSL, CRXSLWIFI, HRXSL and LC wireless controllers
All wireless controllers are to be purchased separately.
Surface ceiling fan heaters are suitable for supermarket and showroom areas or where heat is required locally. They are designed to be suspended via its integral anchorage points and with a completely enclosed housing ensuring ease of installation. Recessed ceiling heaters are designed for discreet positioning in a suspended 600mm standard ceiling panel. They are ideal to heat areas where wall and floor space is at a premium such as shops and offices.
RX Ceiling Fan Heaters
3kW, 4.5kW or 6kW rating
Compatible with advanced single zone controllers*
Fan only setting for air circulation
Wider operation range
Quiet operation
Sealed heater box for improved energy efficiency
Will fit shallow 210mm recess
Safety monitoring feature: The light on the heater will flash indicating the nature of the fault
LED indicator light
SL Ceiling Fan Heaters
3kW, 4.5kW or 6kW rating
Compatible with any Consort wireless controller
Quiet operation
Sealed heater box for improved energy efficiency
Will fit shallow 210mm recess
LED indicator light
* Advanced single zone controllers: CRXSL, CRXSLWIFI, HRXSL and LC wireless controllers
All wireless controllers are to be purchased separately.
Surface ceiling fan heaters are suitable for supermarket and showroom areas or where heat is required locally. They are designed to be suspended via its integral anchorage points and with a completely enclosed housing ensuring ease of installation. Recessed ceiling heaters are designed for discreet positioning in a suspended 600mm standard ceiling panel. They are ideal to heat areas where wall and floor space is at a premium such as shops and offices.
RX Ceiling Fan Heaters
3kW, 4.5kW or 6kW rating
Compatible with advanced single zone controllers*
Fan only setting for air circulation
Wider operation range
Quiet operation
Sealed heater box for improved energy efficiency
Will fit shallow 210mm recess
Safety monitoring feature: The light on the heater will flash indicating the nature of the fault
LED indicator light
SL Ceiling Fan Heaters
3kW, 4.5kW or 6kW rating
Compatible with any Consort wireless controller
Quiet operation
Sealed heater box for improved energy efficiency
Will fit shallow 210mm recess
LED indicator light
* Advanced single zone controllers: CRXSL, CRXSLWIFI, HRXSL and LC wireless controllers
All wireless controllers are to be purchased separately.
Surface ceiling fan heaters are suitable for supermarket and showroom areas or where heat is required locally. They are designed to be suspended via its integral anchorage points and with a completely enclosed housing ensuring ease of installation. Recessed ceiling heaters are designed for discreet positioning in a suspended 600mm standard ceiling panel. They are ideal to heat areas where wall and floor space is at a premium such as shops and offices.
RX Ceiling Fan Heaters
3kW, 4.5kW or 6kW rating
Compatible with advanced single zone controllers*
Fan only setting for air circulation
Wider operation range
Quiet operation
Sealed heater box for improved energy efficiency
Will fit shallow 210mm recess
Safety monitoring feature: The light on the heater will flash indicating the nature of the fault
LED indicator light
SL Ceiling Fan Heaters
3kW, 4.5kW or 6kW rating
Compatible with any Consort wireless controller
Quiet operation
Sealed heater box for improved energy efficiency
Will fit shallow 210mm recess
LED indicator light
* Advanced single zone controllers: CRXSL, CRXSLWIFI, HRXSL and LC wireless controllers
All wireless controllers are to be purchased separately.
Surface ceiling fan heaters are suitable for supermarket and showroom areas or where heat is required locally. They are designed to be suspended via its integral anchorage points and with a completely enclosed housing ensuring ease of installation. Recessed ceiling heaters are designed for discreet positioning in a suspended 600mm standard ceiling panel. They are ideal to heat areas where wall and floor space is at a premium such as shops and offices.
RX Ceiling Fan Heaters
3kW, 4.5kW or 6kW rating
Compatible with advanced single zone controllers*
Fan only setting for air circulation
Wider operation range
Quiet operation
Sealed heater box for improved energy efficiency
Will fit shallow 210mm recess
Safety monitoring feature: The light on the heater will flash indicating the nature of the fault
LED indicator light
SL Ceiling Fan Heaters
3kW, 4.5kW or 6kW rating
Compatible with any Consort wireless controller
Quiet operation
Sealed heater box for improved energy efficiency
Will fit shallow 210mm recess
LED indicator light
* Advanced single zone controllers: CRXSL, CRXSLWIFI, HRXSL and LC wireless controllers
All wireless controllers are to be purchased separately.
Surface ceiling fan heaters are suitable for supermarket and showroom areas or where heat is required locally. They are designed to be suspended via its integral anchorage points and with a completely enclosed housing ensuring ease of installation. Recessed ceiling heaters are designed for discreet positioning in a suspended 600mm standard ceiling panel. They are ideal to heat areas where wall and floor space is at a premium such as shops and offices.
RX Ceiling Fan Heaters
3kW, 4.5kW or 6kW rating
Compatible with advanced single zone controllers*
Fan only setting for air circulation
Wider operation range
Quiet operation
Sealed heater box for improved energy efficiency
Will fit shallow 210mm recess
Safety monitoring feature: The light on the heater will flash indicating the nature of the fault
LED indicator light
SL Ceiling Fan Heaters
3kW, 4.5kW or 6kW rating
Compatible with any Consort wireless controller
Quiet operation
Sealed heater box for improved energy efficiency
Will fit shallow 210mm recess
LED indicator light
* Advanced single zone controllers: CRXSL, CRXSLWIFI, HRXSL and LC wireless controllers
All wireless controllers are to be purchased separately.
Toweldry Towel Rails including Low Surface Temperature models � 30W
Ideal for bathrooms, kitchens and laundries, our heated towel rails deliver the luxury of warm, dry towels � all day, every day � economically and safely.
The range offers models to suit individual needs including Low Surface Temperature models suitable for retirement homes, hospitals and schools as well as domestic environments.
The 30W towel rails comply with NHS Estates Health Guidance Notes and have a maximum surface temperature of 43�C when uncovered.
30W LST
Adjustable wall brackets.
Very economical to run.
Fitted with 1m supply cable.
Double Insulated Class II appliance, which eliminates the need for supplementary bonding.
IP24 rated.
Finished in white.
Toweldry Towel Rails including Low Surface Temperature models � 80W
Ideal for bathrooms, kitchens and laundries, our heated towel rails deliver the luxury of warm, dry towels � all day, every day � economically and safely.
The range offers models to suit individual needs including Low Surface Temperature models suitable for retirement homes, hospitals and schools as well as domestic environments.
The 30W towel rails comply with NHS Estates Health Guidance Notes and have a maximum surface temperature of 43�C when uncovered.
80W rating.
Adjustable wall brackets.
Very economical to run.
Fitted with 1m supply cable.
Double Insulated Class II appliance, which eliminates the need for supplementary bonding.
IP24 rated.
Finished in white.
40w Heated Towel Rail in white with adjustable wall brackets and fitted cable. Double insulated Class II appliance eliminating the need for supplementary bonding. Dimensions: 410mm(h) x 85mm(d) x 460mm(w) (3kg)
Our 3kW commercial fan heaters provides comfort heating while working in garages and workshops.
3kW rating.
Supplied with HRXSL controller.
Single phase only.
Option to select room temperature measurement on controller or on heater when used with HRXSL or optional CRXSL controller.
Electronic fault monitoring.
One controller can operate multiple heaters in single zone configuration.
Instant directional warmth.
1 fan speed, 3 heat settings.
Fan only setting for air circulation.
Wall mounted with multi-directional brackets supplied (180� horizontal, 45� vertical).
Can be controlled by simpler SL controllers if required. This would, however, reduce the functionality.
Finished in matt black.
CG2N Wall-Mounted Convector Guard
CG2N is a wall-mounted convector guard ideal where extra protection is required for wall-mounted convector heaters � for example, heavy traffic corridors, classrooms, workshops etc.
Designed to fit a wide range of 2kW convector heaters.
Provides extra mechanical protection and safety.
Can be retrofitted.
Reduces RF range on SL heaters.
Finished in white.
Wall-mounted downflow fan heater with 7-day timer
The new Consort DF2E Heatflow is a downflow fan heater with a digital variable thermostat. It features a 7-day programme, 6 temperature settings per day, comfort and setback temperature/frost protection settings and automatic overheat safety cut-out. It provides rapid warmth and an adjustable heat output (1kW or 2kW).
Heating capacity: 1kW, 2kW (depending on pre-setting)
Up to 2kW heat output for fast heating
Digital variable thermostat
7-day programme/6 temperature settings per day
Open window detection
Cell battery to backup real time clock
4 operating modes
Copy day function
Safety monitoring feature: The heater will detect and show the nature of the fault on the display screen
Child lock feature
Reduces heat output to 1kW when approaching target temperature
Maintains temperature within 0.5�C
Automatic safety cut-out
Can set temperatures in degrees Celsius and Fahrenheit
Double insulated class II appliance
Large LCD
Fitted with 0.7m cable
Finished in white
Technical Specifications
Supply voltage: 230V-240V, 50Hz
Ideal for outdoors, bathrooms and other wet areas. Suitable for any commercial premises where a heating cycle is required to be operational only when a controller is activated.
The SLPBWP is an IP65 rated waterproof run-back timer and thermostat which allows the heaters to operate only when the controller is activated.
IP65 rated
Can operate multiple SL heaters
3 operating modes:
Basic: Switches the heater on and off when button is pressed.
Timer: Controller acts as a run-back timer where heating period will be active until run-back timer expires.
Temperature control: Features temperature control for comfort and setback periods.
Choice of 3 total time periods in Timer mode: 15, 30 or 60 minutes
Comfort heat setting between 15�C to 35�C
Setback temperatures can be used for frost protection or maintaining a minimum room temperature 0�C to 15�C
1 light indicator around the button to show the status of the controller
Easy operation
External input available to connect to any voltage free contact such as timers or BMS
Can be powered by either mains 240V or 12VDC which allows SELV (Separated Extra Low Voltage) installation.
* Power adapter not supplied.
SLPBWP�s Operating Modes
The SLPBWP has one control button, a status indicator and operating modes which are set prior to the controller�s installation.
Basic mode: The controller simply switches the heater on and off when the button is pressed.
Timer mode: It acts as a run-back timer where the heating period will be active until the run-back timer expires.
Temperature Control mode: It features temperature control for comfort and setback periods which can also be used in conjunction with the Timer mode.
These heaters are IP55 rated making them totally weatherproof.
They are ideal for heating a patio, terrace or an outdoor smoking area. The heaters utilise the high energy, shortwave output of quartz halogen lamps. The anodised aluminium reflector ensures the heat is directed to a specific area and the glass-free front ensures maximum thermal efficiency. These features make the QZWP a significantly more environmentally friendly product for heating outdoor areas compared to gas heaters, which are far less efficient as much of the heat dissipates into the atmosphere.
The QZWP is clean, silent, and odourless and is virtually maintenance free. The running costs are very low, working out approximately a third of the total running costs of gas systems.
1.5kW, 3kW or 4.5kW rating
Can be wall or overhead mounted
Weatherproof � IP55 rated
Instant heat
Ideal for outdoor use
Lamp life of 5,000+ hours
Wall mounting brackets to allow heat to be directed
Optional Softstart Control available � QSC3 or QSC6
Fitted with 2.8m of supply cable
1.5kW model includes a parasol bracket
Fitted guard included
Replaceable lamp
Finished in black
PSL Panel Heaters
Consort�s wireless control panel heaters are efficiently designed to provide energy savings and total comfort. The panel heaters are very slim and contemporary in design. They have strengthened grilles to increase durability. The wall mounting system features a new snap-on bracket which allows easy installation, cleaning and decorating.
0.5kW, 0.75kW, 1kW,1.25kW, 1.5kW or 2kW rating
Compatible with any Consort wireless controller
Very quiet operation
Automatic safety cut-out
Strengthened grille for increased durability
Splash proof to IP24 for use in bathrooms and other damp areas
Snap-on bracket for easy installation and decorating
LED light indicator
Fitted with 1.1m of supply cable
Finished in white
All wireless controllers are to be purchased separately.
PSL Panel Heaters
Consort�s wireless control panel heaters are efficiently designed to provide energy savings and total comfort. The panel heaters are very slim and contemporary in design. They have strengthened grilles to increase durability. The wall mounting system features a new snap-on bracket which allows easy installation, cleaning and decorating.
0.5kW, 0.75kW, 1kW,1.25kW, 1.5kW or 2kW rating
Compatible with any Consort wireless controller
Very quiet operation
Automatic safety cut-out
Strengthened grille for increased durability
Splash proof to IP24 for use in bathrooms and other damp areas
Snap-on bracket for easy installation and decorating
LED light indicator
Fitted with 1.1m of supply cable
Finished in white
All wireless controllers are to be purchased separately.
PSL Panel Heaters
Consort�s wireless control panel heaters are efficiently designed to provide energy savings and total comfort. The panel heaters are very slim and contemporary in design. They have strengthened grilles to increase durability. The wall mounting system features a new snap-on bracket which allows easy installation, cleaning and decorating.
0.5kW, 0.75kW, 1kW,1.25kW, 1.5kW or 2kW rating
Compatible with any Consort wireless controller
Very quiet operation
Automatic safety cut-out
Strengthened grille for increased durability
Splash proof to IP24 for use in bathrooms and other damp areas
Snap-on bracket for easy installation and decorating
LED light indicator
Fitted with 1.1m of supply cable
Finished in white
All wireless controllers are to be purchased separately.
PSL Panel Heaters
Consort�s wireless control panel heaters are efficiently designed to provide energy savings and total comfort. The panel heaters are very slim and contemporary in design. They have strengthened grilles to increase durability. The wall mounting system features a new snap-on bracket which allows easy installation, cleaning and decorating.
0.5kW, 0.75kW, 1kW,1.25kW, 1.5kW or 2kW rating
Compatible with any Consort wireless controller
Very quiet operation
Automatic safety cut-out
Strengthened grille for increased durability
Splash proof to IP24 for use in bathrooms and other damp areas
Snap-on bracket for easy installation and decorating
LED light indicator
Fitted with 1.1m of supply cable
Finished in white
All wireless controllers are to be purchased separately.
PSL Panel Heaters
Consort�s wireless control panel heaters are efficiently designed to provide energy savings and total comfort. The panel heaters are very slim and contemporary in design. They have strengthened grilles to increase durability. The wall mounting system features a new snap-on bracket which allows easy installation, cleaning and decorating.
0.5kW, 0.75kW, 1kW,1.25kW, 1.5kW or 2kW rating
Compatible with any Consort wireless controller
Very quiet operation
Automatic safety cut-out
Strengthened grille for increased durability
Splash proof to IP24 for use in bathrooms and other damp areas
Snap-on bracket for easy installation and decorating
LED light indicator
Fitted with 1.1m of supply cable
Finished in white
All wireless controllers are to be purchased separately.
PSL Panel Heaters
Consort�s wireless control panel heaters are efficiently designed to provide energy savings and total comfort. The panel heaters are very slim and contemporary in design. They have strengthened grilles to increase durability. The wall mounting system features a new snap-on bracket which allows easy installation, cleaning and decorating.
0.5kW, 0.75kW, 1kW,1.25kW, 1.5kW or 2kW rating
Compatible with any Consort wireless controller
Very quiet operation
Automatic safety cut-out
Strengthened grille for increased durability
Splash proof to IP24 for use in bathrooms and other damp areas
Snap-on bracket for easy installation and decorating
LED light indicator
Fitted with 1.1m of supply cable
Finished in white
All wireless controllers are to be purchased separately.
The SLPBWIFI wireless controller has WiFi capability which when being used, connects SL Consort heaters to the Consort Connect app so that they can be remotely controlled. The Connect app provides complete heating control remotely, with programming and energy saving features, including the ability to view energy consumption statistics in the last day, week, month and year.
Can operate multiple SL heaters.
1 operating mode with basic on/off function when being used without WiFi.
Only works with 2.4GHz WiFi network.
With in-built occupancy sensor.
Easy operation.
Powered by 230 � 240V AC.
Fits onto most types of standard single gang boxes.
Features and functions when being used with WiFi:
4 operating modes: Manual, Frost protection, Boost & Automatic timer.
15-minutes Boost feature providing maximum comfort quickly.
4 light indicators located around the button and blue indicator in the bottom corner showing status of the controller.
7-day timer with 24 heating periods per day.
Self-learning control ability utilising occupancy and temperature sensors.
Ability to view energy consumption statistics.
Open window tracking and response capability.
Comfort heat setting between 4�C to 35�C.
Setback temperatures can be used for frost protection or maintaining a minimum room temperature 4�C to 15�C.
Lock function with 4-digit pin code to prevent accidental or purposeful changes to settings.
Warning:
This product is NOT suitable for use with a metal back box with 4 fixings. A metal back box with 2 fittings can be used. As the images below are for illustrations only, please ignore the depth of the back boxes.
Gorilla Contact Adhesive has a flexible, fast-setting, waterproof formula, making it suitable for both indoor and outdoor use. It forms a crystal clear, permanent bond. Bonds: metal, glass, fabric, wood, ceramic, leather, paper, rubber, plastic and more.
Pack of 2
Gorilla Contact Adhesive has a flexible, fast-setting, waterproof formula, making it suitable for both indoor and outdoor use. It forms a crystal clear, permanent bond. Bonds: metal, glass, fabric, wood, ceramic, leather, paper, rubber, plastic and more.
Pack of 3
The Bahco Contractor's Bi-Metal Holesaw Set contains Sandflex® bi-metal holesaws that are specifically designed for metal cutting but can also be used in most materials such as wood and plastics. Bi-metal construction with 8% cobalt. Supplied in a handy plastic case. This 11 Piece Set contains: 4 x 20mm Holesaws4 x 25mm Holesaws1 x Arbor*2 x Replacement Drill Bits Specification: Max. Cutting Depth: 38mm *Arbour requires a power drill with 10mm chuck.
The Cooker Cable Outlet Plate is designed for safe and efficient electrical installations. This durable plate ensures a secure connection for your cooker cable, making it an essential component for any kitchen setup.
High-Quality Material: Built to last with robust construction.
Easy Installation: Designed for quick and hassle-free setup.
Versatile Use: Suitable for various cooker types and electrical systems.
Safety First: Ensures secure connections to prevent electrical hazards.
Compact Design: Fits seamlessly into your kitchen decor.
This Deta Vimark Cooker Control Unit is made from durable, moulded plastic and has a smooth, curved profile with a red rocker. It allows for the isolation of hardwired cookers. There is also an additional socket allowing the use of another appliance. Suitable for internal use. Designed to complement other products from the Deta Vimark range.
The Copper Float 6" is designed for reliable performance in various water applications. Its durable construction ensures longevity and efficiency.
High-Quality Copper Material for Durability
6" Size Ideal for Various Water Systems
Easy to Install and Maintain
Perfect for Use in Tanks and Pools
Corrosion-Resistant for Long-Lasting Use
The Copper Float 8" is designed for effective water management in various applications. Its durable construction ensures reliability and longevity.
High-Quality Copper Material for Durability
8" Size Ideal for Various Water Applications
Easy to Install and Maintain
Corrosion Resistant for Long-Lasting Use
Perfect for Use in Tanks and Water Systems
Copydex adhesive can be used for repairing carpets, matting, clothing, upholstery and many other fabrics as well as general home use. Safe and easy-to-use, solvent-free. Ideal for: Paper, card, wood, plastics, metal, cork, fabric, carpets, leather, canvas and many more materials. Available in tubes and bottles.Size: 125 ml Bottle.
