Bathroom / Toilet Extractor Fan with over-run timer
_Mains 230/240V AC. Extractor fan suitable for small bathroom situation.
_Timer over-run continues to run fan after room light is switched off (permanent live required)
_22 litres per second / 80 cubic metres per hour extract rate. 15 watts power consumption.
_Sound output 48dB(A) @ 3m. IP22
_156mm wide x 156mm high x 48mm deep. 99mm spigot that extends for 53mm
Airvent White Kitchen Extractor Fan with Pullcord 6'' 150mm - Wall or Window
_Mains voltage 230/240V AC 50Hz
_Extraction rate 68 litres per second, 245 cubic metres per hour
_Power consumption: 25 watts, Sound output: only 45dB(A) @ 3m
_Pullcord switch
_IP22 rated, CE approved
This model incorporates a condensation (humidity) sensor which automatically switches the fan on when the condensation level builds up. Once the condensation clears the fan turns off. Airvent are part of the Vent Axia group Dimensions: 224mm wide x 224mm tall x 15mm deep (beyond installed surface). 145mm diameter spigot, extends for 110mm. For connection to 150mm / 6 inch ducting
_Mains voltage 230/240V AC 50Hz
_Extraction rate 63 litres per second, 228 cubic metres per hour
_Power consumption: 25watts, Sound output: only 45dB(A) @ 3m
_Double spring operated backdraught shutter
_IP44 rated, CE approved
Airvent 435403 - Kitchen Extractor Fan 6''/150mm - Low Profile/Slimline - With Integral Butterfly Style Shutters
_Mains 230/240V AC 50Hz. Power consumption: 25 watts
_Extraction rate 63 litres per second, 228 cubic metres per hour
_Sound output: 40dB(A) @ 3m. Double spring operated backdraught shutter
_IP44 rated. CE approved
_Dimensions: 224mm wide x 224mm tall x 15mm deep (beyond installed surface). 145mm diameter spigot, extends for 110mm. For connection to 150mm / 6 inch ducting
Low voltage (SELV) 12V extractor fan with separate transformer. This fan is suitable for use within zone 1, shower enclosures etc, providing the transformer unit is located outwith zone 2, e.g. in an adjacent cupboard or loftspace. This model incorporates a run-on timer which operates in connection with the room light switch. When the light is switched on the fan starts, when the light is switched off the fan continues to run for the pre-set period. Permanent live, switched live and neutral wires (3 cores + earth) are required at the transformer position in order to function correctly. Suitable for ceiling mounting as long as the ducting is kept shorter than 1.5m. Fan dimensions: 160mm wide x 160mm tall x 10mm deep (beyond installed surface). 99mm diameter spigot, extends for 80mm. For connection to 100mm / 4\ ducting. Transformer dimensions: 149mm wide x 88mm tall x 67mm deep
_21 litres per second, 75 cubic metres per hour extraction rate
_For use with fluorescent lamp wattages 4-8, 13, 15, 18-20, 25-65 & 80 Watt
_Manufactured to BS EN 60155
AIRVENT Kitchen/Utility Room Axial Extract Fan with over run timer and internal shutters, suitable for panel, wall or window mounting when using the appropriate accessory, such as tube or flexi ducting and an external grille. This listing is for the fan only. Requires two live wires!
_AIRVENT Kitchen/Utility Room Axial Extract Fan with over run timer and internal shutters, suitable for panel, wall or window mounting
_Requires 2 Live Wires: A Switched Live and a Permanent Live as well as a Neutral
_No Earth Required as Double Insulated
Square White Fan Grille to fit onto 150mm 6" Ducting. The Grille has a circular spigot on the rear to fix onto your solid or flexible ducting. There are screw holes in each corner and fixed slats at a slight gradient. The front of the grille measures approx 19cm square. The round spigot at the back has a diameter of slightly under 150mm and a depth of approx 2cm. The cover has an overall depth of approx 3cm and has curved edges to give a neat finish.
_Premium Plastic Grille with Rounded Edges - 19cm Square
_Round Spigot At Rear - 147cm diameter to fit onto 150mm ducting
_Curved Edges to Give a Neat Finish
_Screw Holes in Each Corner
_Fixed Slats at a Slight Gradient
Airvent 401901 Wall Fixing Kit in White for 4'' Extractor Fan
_Kit consists of an External Fixed Grille and a Length of 4" Solid Tube
_Grille is White with Fixed Louvres with a 4" Round Spigot to Rear
_Solid Tube is approx 4" in diameter and approx 35cm long
White Ducting that stretches out to approx 3m long. The ducting is approx 6" in diameter. Commonly used with extractor fans and larger tumble dryers/air conditioning units
