These Faithfull Welded Chains are manufactured from a mild steel with a Black Japanned finish. These chains are load tested, but not certified and should never be used for any overhead lifting, load binding or towing applications. Maximum load figures quoted are for guidance ONLY.Size: 5mm x 10m. Maximum Load: 160Kg.
The RIDGID® Micro IR-200 Non-Contact Infrared Thermometer provides simple, quick and accurate surface temperature readings at the push of a button. Simply squeeze the trigger and point the ultra-sharp dual class II lasers at the surface being measured. Ultra-Sharp Dual Class II Lasers easily identify the surface area being measured. Has a 30 to 1 Distance To Spot Ratio, this allows you to take more accurate measurements from a farther distance. With adjustable emissivity to accurately measure the temperature of virtually any surface. Uses audible and visual, high and low alarms to quickly alert user to temperatures outside of the ranges that are set. It has a bright backlit display which can be toggled on in poorly lit areas and can be mounted on a tripod for repeatable, precise temperature measurements. Specification Temperature Range: -50 to 1200°C (-58 to 2192°F),Distance To Spot Ratio: 30 to 1.Response Time: <150ms.Temperature Display: Current Temperature & MAX Temperature.Measurement Units: Fahrenheit & Celsius.Power Source: 1 x 9 Volt Battery (Included).Weight: 0.20kg.
Clamping with leverage Speed, safety and strength The original BESSEY lever clamps are lightweight, easy-to-handle, dimensionally stable, and torsion resistant. And the best thing is: they can clamp up to 5 x faster than conventional clamps. This is because they use the natural force of the lever, meaning that with just a small amount of effort they can quickly produce large clamping pressures. This is particularly valuable in situations where many clamps have to be applied in a short time, with no risk of loosening due to vibrations. Try it out! The lever clamp GH allows you to clamp up to 5 x faster than with conventional clamps. Rapid - Up to 5 x faster than conventional clampsSecure - Unaffected by vibrationsStrong - High clamping forceYour benefits at a glance: Secure ratchet mechanismThe ratchet mechanism ensures rapid, controlled, vibration free clamping. Hardened cam at the end of the lever ensures a long service life. Extremely sturdyFixed bracket and pressure plate are produced and tempered from a single piece, thus very torsion-resistant. This guarantees you maximum tensile strength and sturdiness. Forged sliding armThe sliding arm is serrated and made from tempered, drop-forged steel. For an extremely long service life. Ergonomically shaped clamping leverThe powder-coated clamping lever and the plastic-coated release lever are also remarkably ergonomic.The Bessey GH40 Lever Clamp has the following specification: Clamping Force: up to 8,000N.Opening: 400mm.Throat Depth: 120mm.Rail: 25 x 12mm.Weight: 2.41kg.
The Faithfull Shutter Padlocks can be used in a variety of situations and are ideal for security shutters, gates and bollards.The padlock has a brass body with stainless steel armoured casing. Its rotating shackle is made from hardened steel. It has a 6-pin security cylinder. This padlock is key retaining, meaning the key can only be removed when in the locked position. The shackle springs open when unlocked.Supplied complete with 3 keys.The Faithfull FAIPLB60SHUT 60mm Shutter Padlock has the following specifications: Body dimensions: Height: 52mm.Width: 60mm.Depth: 18mm. Shackle dimensions: Diameter: 9mm.Clearance: 15mm.
These Faithfull welded steel chains are made with the link side welded for extra strength. They have mild steel welded straight links made to form an A style short link chain. The chains are bright zinc plated and ideal for general purpose applications such as securing loads. Maximum load figures quoted are for guidance only. These chains are test load tested, but not certified and should never be used for any overhead lifting, load binding or towing applications.The Faithfull FAICHAL430 A link chain has the following dimensions:Thickness: 4mmLength: 30m
The Faithfull FAICHPOSTBAS is a plastic post base only. The base can be filled with water or sand for stability and has the following specifications:Colour: Black.Diameter: 30cm.
The Faithfull Fire Brigade Snap Hook is designed for the quick release and attachment of ropes and loops. This hook has a spring-loaded return mechanism, which allows it to be used where a quick but secure fixing is required. Chain accessories should never be used for any overhead lifting, load binding or towing applicationsThis Faithfull Fire Brigade Snap Hook has the following specifications: ; Link Diameter: 4mm. Length: 40mm. Finish: Zinc Plated. Quantity: 4.
These Faithfull welded steel chains are made with the link side welded for extra strength. They have mild steel welded straight links made to form an A style short link chain. The chains are bright zinc plated and ideal for general purpose applications such as securing loads. Maximum load figures quoted are for guidance only. These chains are test load tested, but not certified and should never be used for any overhead lifting, load binding or towing applications.The Faithfull FAICHAL330 A link chain has the following dimensions:Thickness: 3mmLength: 30m
DEWALT Smart Electric Vehicle Charging Station 400V 22kW 3 Phase for UK market. The anti-slip grip handle is easy to use. Built-in wi-fi/Bluetooth allows for app connectivity. The Dewalt app is free to download. With the app you can easily install and control charger. Once installed you can receive notifications, set up charging schedules and monitor costs easily.Supplied with mounting bracket and hardware.Specifications:Power Type: HardwiredOutput Cable and Connect Length: Type 2 5m 5G6.0mm2+1*0.5mm2 TPU cableRated Voltage: 380V ACMaximum Capacity：22KW 3PhaseCurrent: 16A-32ALED Indicator: YesIP Grade: IP65 for control boxWorking Temperature: -30 °C to + 50 °C
The ABUS 55 Series Brass Padlocks have inner components made from non-corrosive materials. Pin tumbler cylinder with anti-pick mushroom pins which resists picking, a hardened steel shackle which resists hacksaw attacks and is double bolted 30mm and above for increased shackle strength. Long shackle (HB) version available.This ABUS 55/40HB63 Brass Padlock has the following specification: ABUS Security Level: 4. Shackle Width: 21mm.Shackle Height: 63mm.Shackle Diameter: 6.5mm. Overall Width: 38mm.Overall Height: 102mm.Overall Depth: 13mm.
The ABUS 145 Series Aluminium Combination Padlocks feature resettable combinations. The lock body is made from solid aluminium with an anodized coating that is corrosion resistant. Fitted with a spring loaded steel shackle for better setting of the opening code. As the padlocks are secured by means of a 3-digit or 4-digit number combination that can be set individually, they are ideal for use in the leisure industry as there is no need to carry a key. They are also ideal for securing items of luggage or tool boxes. 20-30mm: 3 digit combination, to secure valuables/goods of lesser value or at a low risk of theft. 40mm: 4 digit combination, to secure valuables/goods of medium value or at an average risk of theft.Size : 20 mm.Colour : Green.
The ABUS 65 Series Marine Brass Padlocks have a body made from solid brass and a stainless steel shackle. The inner components are made from non-corrosive materials. Pin tumbler cylinder with anti-pick mushroom keys offers greater protection against manipulation. The padlock locks automatically, it does not require a key. They are suitable for low to medium security requirements and are also suitable where a strong requirement for service performance and longevity is required.This ABUS 65IB/50 Brass Marine Padlock is supplied carded and has the following specification: ABUS Security Level: 6. Shackle Width: 28mm.Shackle Height: 29mm.Shackle Diameter: 8mm. Overall Width: 50mm.Overall Height: 77mm.Overall Depth: 18mm.
HG Electronic Fly and Mosquito Eliminator is the quick and clean solution for getting rid of mosquitoes, flies and wasps. Our electric fly swatter prevents dirty stains caused by squashed insects, because the insects are electrocuted and stay intact. Batteries included.
The ABUS 85 Series Brass Padlocks have a soild brass lock body and high quality, rust-free inner components. Fitted with a hardened steel shackle; double bolted with NANO PROTECT™ shackle coating, 30mm and above. The precision pin cylinder features anti-pick mushroom pins and a paracentric keyway for increased protection against manipulation. Automatic locking, the padlock can be locked with a key, just push down the shackle. Ideal for securing a wide range of objects. Sizes 20-40mm: for securing valuables/goods of medium value or at an average risk of theft. Sizes 50-70mm: for securing valuables/goods of greater value or at a high risk of theft.This ABUS 85/50 Brass Padlock has the following specification: ABUS Security Level: 7.Keyed Alike Key Reference: 2747. Shackle Width: 29mm.Shackle Height: 28mm.Shackle Diameter: 8mm. Overall Width: 50mm.Overall Height: 77mm.Overall Depth: 17mm.
The ABUS 65 Series Brass Padlocks have a solid brass body and a hardened steel shackle with NANO PROTECT™ coating. The inner components are made from non-corrosive materials. The precision pin cylinder has mushroom counter pins with the paracentric key-way offering greater protection against manipulation. Automatic locking mechanism. Sizes 20-25mm are ideal for securing valuables / goods of lesser value or at a low risk of theft. Such as bags, suitcases, jewellery boxes, cash boxes, etc. Sizes 30-60mm are ideal for securing valuables / goods of medium value or at an average risk of theft. Such as chains, doors, gates, cupboards, lockers, toolboxes, cellar windows, sheds, switchboards, etc.This ABUS 65/30HB60 Brass Padlock has the following specification: ABUS Security Level: 4.Keyed Alike Key Reference: 6405. Shackle Width: 16mm.Shackle Height: 60mm.Shackle Diameter: 5mm. Overall Width: 30mm.Overall Height: 93mm.Overall Depth: 14mm. The cylinder can be re-keyed to match an existing key (Keyed Alike).
The ABUS 64TI Series TITALIUM™ Padlocks are ideal for medium to high risk of theft, recommended for a wide range of security requirements. All models in this series have a paracentric keyway and chrome plated cylinder cores. Hardened steel shackle, 30mm and above, with NANO PROTECT™ shackle coating which assures security and high corrosion resistance. TITALIUM™ is based on a special aluminium alloy, a mixture of materials is created that is extremely durable and lightweight; similar to the process used in aircraft construction. Compared to classic brass padlocks, the locks in the TITALIUM™ series are around 30% lighter but feature the same level of security making them excellent value for money. Sizes: 20 to 25mm, ideal for securing bags, suitcases, jewel cases, tool boxes, etc. Sizes 30mm and up, ideal for securing valuables/goods of medium value or at a an average risk of theft.This ABUS 64TI/50 TITALIUM™ Padlock and has the following specification: ABUS Security Level: 5.Keyed Alike Key Reference: KA6512. Shackle Width: 28mm.Shackle Height: 29mm.Shackle Diameter: 8mm. Overall Width: 50mm.Overall Height: 77mm.Overall Depth: 17mm.
The T.S.A. (Transport Security Administration) is an agency of the U.S. Department of Homeland Security which is responsible for the safety and security of the public travelling to the United States. The ABUS TSA Luggage locks allow the agency to open and search air passengers' luggage and then relock using a TSA master key. Specifications: Width: 33mm.Height: 37mm.Depth: 14mm. Shackle Width: 20.5mm.Shackle Height: 13mm.Shackle Diameter: 3mm.
The McAlpine ST90WH10-HP is a high-performance shower trap designed to efficiently remove waste water from a shower tray. It has a water seal of 90mm x 50mm and a 2" universal outlet, which can accommodate various plumbing configurations.
The high-flow design of the trap allows for quick and efficient drainage, ensuring that water does not accumulate in the shower tray. The trap also features a removable 110mm flange, which makes it easy to clean and maintain.
What sets the ST90WH10-HP apart from other McAlpine shower traps is that it has a white finish on its plastic components, giving it a cleaner and more polished look in comparison to other models that have exposed black plastic components.
Overall, the McAlpine ST90WH10-HP is a reliable and effective option for any shower installation, providing both performance, aesthetics and convenience.
・ Flanges available in White or Chrome Plated Plastic, or Chrome Plated Brass
・ Suitable for shower trays with a 90mm waste hole
・ 50mm Water Seal
・ 1½" BSP Thread
・ Supplied with 135° Bend - BSP coupling nut x 2" Universal
The Wiha SoftFinish electric slimFix Screwdrivers come with a high quality Chrome vanadium steel blade, through hardened with a black-finish. Insulation is moulded directly onto the blade. Individually tested at 10,000 V AC and approved for 1,000 V AC.Patented SoftFinish handle ensures work is kind to hands and muscles. Recommended by doctors and therapists at the German Campaign for Healthier Backs. slimFix handles have been specially developed for electric applications, blades are up to 33% slimmer. The unique Wiha handle-length concept provides optimum balance of torque and control. Manufactured according to IEC 60900. This 6 Piece Set contains the following: 4 x Slotted Screwdrivers: 3.5 x 100mm, 4.0 x 100mm & 5.5 x 125mm.2 x Phillips Screwdrivers: PH1 x 80mm & PH2 x 100mm.1 x PlusMinus Screwdriver: SL/PZ2 x 100mm.
Faithfull SDS MAX scaling chisel straight steels are produced to provide high performance in all types of modern large capacity drilling and hammer drilling machines. Manufactured using traditional forging skills such as hammer work on chisels and drop stamp forging of cutting blades, they fit the most popular machines used in the UK. Type: Scaling Chisel.Fitting: SDS Max.FAIMAXSC50Length: 400mm Width: 50mm
The ITL Insulated 3mm Cooker Knob Hex Driver for use on connector boxes. Made from injection moulded nylon 11 which exceeds the requirements of IEC 60900, the industry standard for live line working. In addition, this tool meets the requirements of Category 'C', which requires it to perform at extreme temperatures of -40°C to and70°C, making it unique in this category. These insulated tools are the toughest in the market, being virtually indestructible. With a lifetime warranty on both the tool and insulation, plus a 30 day no quibble money back guarantee.
Main Product Description:
Introducing the FloPlast 68mm Round Pipe Shoe in black, designed to fit seamlessly at the end of your gutter system. This versatile component can be used with various colors of the FloPlast Downpipe system, ensuring a cohesive look for your property. It's made from durable uPVC material, offering resistance to weather conditions and wear over time. With its angled design, it effectively diverts water away from the building, providing efficient drainage solutions. The FloPlast 68mm Round Pipe Shoe is an essential addition to any gutter system, ensuring reliable performance and ease of installation.
Features:
- Made from durable uPVC material for long-lasting performance
- Angled design for effective water diversion
- Available in multiple color options to match the FloPlast Downpipe system
- Lightweight for easy handling during installation
- Can be used with different colors of the FloPlast Downpipe system for a cohesive appearance
Benefits:
- Enhances the aesthetic appeal of your property by matching the color scheme of your gutter system
- Provides reliable drainage solutions by efficiently diverting water away from the building
- Long-lasting durability, resistant to weather conditions and wear over time
- Simple to install due to its lightweight nature and easy cutting capabilities using a fine-toothed saw
J-B Weld WaterWeld trade; Epoxy Putty will plug or seal leaks and patch holes and cracks in almost anything. Ideal for repairing plumbing, fuel tanks, tub and shower, drains, pool and spa, boats and portable water tanks; setup occurs even under water. After curing, it can be drilled, tapped, filed, sanded and painted. Works on fibreglass, PVC plastic, copper, brass, iron and aluminium. Resistant to water, oil, gas, diesel, hydraulic fluids and most other chemicals. Specifications: Bonding Strength: 1,300 PSI.Temperature Resistant: up to 148 deg;C (300 deg;F).Set Time: 25 Minutes.Cure Time: 1 Hour.Colour When Dry: Off White.Size: 57g.
The DEWALT Pozi Bits have a hardened core for extra strength and durability. The design features extra grip ribs that grip the screw and reduce slipping (specific bits only). They are tough quality, professional screwdriver bits. This display contains 21 Tic Tac boxes, each containing 25 x PZ2 25mm bits.
The Hep2O HD4A Spigot Elbow is designed for efficient plumbing connections. This 15 x 10mm elbow fitting is perfect for various plumbing applications, ensuring a secure and reliable connection.
High-Quality Material: Made from durable materials for long-lasting use.
Easy Installation: Designed for quick and straightforward installation.
Versatile Use: Suitable for a range of plumbing systems.
Compact Design: Space-saving design for tight installations.
Reliable Performance: Ensures a leak-free connection for peace of mind.
JG Speedfit brass female cylinder adaptor push-fit fitting that connects pipe to a female thread hot cylinder. The push-fit fitting is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works. Designed, manufactured and assembled in the UK. Safe flame-free installation, with no hot works, glue or flux Grip & Seal collet with stainless steel teeth and main O-Ring seal Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe Suitable for hot and cold water and central heating systems
JG Speedfit brass female cylinder adaptor push-fit fitting that connects pipe to a female thread hot cylinder. The push-fit fitting is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works. Designed, manufactured and assembled in the UK.
Safe flame-free installation, with no hot works, glue or flux
Grip & Seal collet with stainless steel teeth and main O-Ring seal
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water and central heating systems
JG Speedfit reducer push-fit fitting for the connection of plastic or copper pipe. The reduced spigot end allows for two Speedfit push-fit fittings to be joined, creating a swivel type connection while reducing the line size. Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release.
The JG Speedfit reducer push-fit fitting is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK.
Instant push-fit connection
Install and demount in seconds without tools
Safe flame-free installation, with no hot works, glue or flux
Grip & Seal collet with stainless steel teeth and main O-Ring seal
Twist & Lock mechanism secures fitting and adds compression
Non-toxic, resists corrosion and no scale build-up
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water and central heating systems
John Guest push-fit acetal female adaptor (BSP thread) fitting connects metric sized pipework to a BSP type fitting. Fast and simple to install, John Guest push-fit fittings create an instant push-fit connection and leak tight seal without the need for tools, hot works or sealing agents.
The unique collet locking design firmly and securely holds the pipe in place without deforming the pipe or restricting flow. Fittings are corrosion resistant and fully demountable, improving system performance and reducing system downtime during maintenance.
Manufactured in acetal copolymer, the fitting is suitable for water, potable liquids and intermittent hot water applications (up to 65°C max). All John Guest fittings are manufactured and assembled in the UK.
Rigid and hardwearing acetal copolymer material with an EDPM O-Ring
Suitable for potable liquids and intermittent hot water applications up to 65°C max (not suitable for air, pneumatic or vacuum applications)
Instant push-fit connection and leak tight seal
Connect, disconnect and reconnect in seconds without tools
No scale build up improves performance and equipment lifespan
Superior flow characteristics
Compatible with LLDPE or soft metal pipe/tubing
Pack of 5
The Hep20 Hep2o HX18 Straight Service Valve is designed for reliable plumbing applications. With a size of 15mm x 1/2", this valve ensures a secure and efficient flow control.
High-Quality Construction: Made from durable materials for long-lasting performance.
Easy Installation: Designed for straightforward fitting in various plumbing systems.
Versatile Use: Suitable for both residential and commercial plumbing needs.
Reliable Performance: Ensures consistent flow control and pressure management.
Compact Design: Space-saving design ideal for tight installation areas.
The RIDGID Heavy-Duty Straight Pipe Wrench has a sturdy, cast-iron housing and I-beam handle with full floating forged hook jaw, featuring self cleaning threads with replaceable hook and heel jaws.Specification: Size: 250mm (10in)Capacity: 40mm (1.1/2in)Weight: 0.8kg
The RIDGID Heavy-Duty Straight Pipe Wrench has a sturdy, cast-iron housing and I-beam handle with full floating forged hook jaw, featuring self cleaning threads with replaceable hook and heel jaws.RIDGID Heavy-Duty Straight Pipe Wrench Size: 900mm (36in)Capacity: 125mm (5in)Weight: 8.7kg
