ForgeFix ForgeFast Wood Screws have a universally accepted, Torx® compatible drive. Their recessed ribs provide improved countersinking and reduced surface dust, and their reinforced countersunk necks improve holding power. The screws have a patented drill and drive thread for reduced splitting of the timber, reduced 'jacking' and spinning of joined timber, increased pull-out and a firmer fix. A sharp point provides faster bite and is capable of piercing 0.8mm steel. The screws have an 'Elementech 400' coating providing an anti-corrosive metal finish, which lasts up to 6 times longer than standard zinc coatings. The coating is environmentally friendly and does not contain Cr6+. It is Salt Spray tested to 400 hours. The screws are suitable for interior use. Every box is supplied with a Torx® compatible bit.Size: 4.5 x 20mm.Box quantity: 200.
These ForgeFix ForgeFast Wood Screws have a universally accepted, Pozi compatible drive. They have 6 underhead lobes for improved countersinking and reduced surface dust, and reinforced countersunk necks which improve holding power. The screws have an anti-friction thread for reduced splitting of the timber, reduced 'jacking' and spinning of joined timber and improved drawing strength. The thread is serrated for improved pull-out and reduced torque when inserting the screw. The double cutting point allows faster drilling time and reduced clogging of wood dust and is capable of piercing 0.8mm steel. The screws have a 'Elementech 400' coating providing an anti-corrosive metal finish, which lasts up to 6 times longer than standard zinc coatings. The coating is environmentally friendly and does not contain Cr6+. It is Salt Spray tested to 400 hours. The screws are suitable for interior use.Size: 5.0 x 40mm.Box quantity: 200.
Cuprinol Garden Shades has been specially developed to colour and protect sheds, fences and other garden wood, with 6 years weather protection. Its special pigments ensure a rich colour and allow the natural texture of the woodgrain to shine through. It can also be applied on terracotta, brick and stone, to bring beautiful colours to the rest of the garden. It is water-based and harmless to plants and pets.This Cuprinol Garden Shades has the following specification: Colour: Cool Marble Size: 2.5 Litre
ForgeFix ForgeFast Wood Screws have a universally accepted, Torx® compatible drive. Their recessed ribs provide improved countersinking and reduced surface dust, and their reinforced countersunk necks improve holding power. The screws have a patented drill and drive thread for reduced splitting of the timber, reduced 'jacking' and spinning of joined timber, increased pull-out and a firmer fix. A sharp point provides faster bite and is capable of piercing 0.8mm steel. The screws have an 'Elementech 400' coating providing an anti-corrosive metal finish, which lasts up to 6 times longer than standard zinc coatings. The coating is environmentally friendly and does not contain Cr6+. It is Salt Spray tested to 400 hours. The screws are suitable for interior use. Every box is supplied with a Torx® compatible bit.Size: 5.0 x 80mm.Box quantity: 100.
These ForgeFix ForgeFast Wood Screws have a universally accepted, Pozi compatible drive. They have 6 underhead lobes for improved countersinking and reduced surface dust, and reinforced countersunk necks which improve holding power. The screws have an anti-friction thread for reduced splitting of the timber, reduced 'jacking' and spinning of joined timber and improved drawing strength. The thread is serrated for improved pull-out and reduced torque when inserting the screw. The double cutting point allows faster drilling time and reduced clogging of wood dust and is capable of piercing 0.8mm steel. The screws have an 'Elementech 400' coating providing an anti-corrosive metal finish, which lasts up to 6 times longer than standard zinc coatings. The coating is environmentally friendly and does not contain Cr6+. It is salt spray tested to 400 hours. The screws are suitable for interior and exterior use. Every tub is supplied with a Torx® compatible bit.Size: 4.0 x 60mm.Pack quantity: 700.
These ForgeFix ForgeFast Wood Screws have a universally accepted, Pozi compatible drive. They have 6 underhead lobes for improved countersinking and reduced surface dust, and reinforced countersunk necks which improve holding power. The screws have an anti-friction thread for reduced splitting of the timber, reduced 'jacking' and spinning of joined timber and improved drawing strength. The thread is serrated for improved pull-out and reduced torque when inserting the screw. The double cutting point allows faster drilling time and reduced clogging of wood dust and is capable of piercing 0.8mm steel. The screws have a 'Elementech 400' coating providing an anti-corrosive metal finish, which lasts up to 6 times longer than standard zinc coatings. The coating is environmentally friendly and does not contain Cr6+. It is Salt Spray tested to 400 hours. The screws are suitable for interior use.Size: 6.0 x 200mm.Box quantity: 100.
The Roughneck E-Z Read® Tape Measure is a premium grade product designed with the professional in mind. The outer casing is manufactured from a non-slip, shockproof rubber and is further complimented with a strong metal belt clip and powerful blade brake. The rustproof blade is nylon coated for maximum durability, with metric and imperial graduations and is fitted with a 3 rivet reinforced end hook. E-Z Read® blades, where every 1/8in is marked for easy reading, stud marking every 16in and truss marking every 40cm.This Roughneck E-Z Read® Tape Measure has metric and imperial graduations. Blade Length: 3m/10ftBlade Width: 16mm
The DEWALT Force Gilet is suitable to wear as an under or over layer garment. It features a lightweight padding that has a shower resistant nylon outer and a polyester/taffeta inner lining. Comfort stretch side panels and lowered back with centre zip fastening. With 2 hand pockets to lower front and a zipped breast pocket. It also has a reflective DEWALT logo on the chest and rear neck. Available in Sizes Medium - XXXLarge Material Composition: Nylon outer & Polyester/Taffeta innerDEWALT Force Black Lightweight Padded Gilet in Extra Extra Extra Large
The Stanley FatMax® Multi-Grip Groove Joint Pliers feature a push lock adjustment button, and ergonomic bi-material handles, providing a comfortable controlled grip. Drop forged, induction hardened jaws. 17 button locked positions ensure they fit a wide variety of nuts and fittings. Optimised jaw geometry for multiple gripping applications.1 x Stanley FatMax® Groove Joint Pliers 250mm - 51mm Capacity
The Stanley Tools FatMax® Clutch Lock F Clamps have a cast iron body which gives them strength and durability. Fitted with a stock lock to avoid any unexpected movements. The cold rolled steel reduces any bending or give, whilst the ergonomic handle makes it easy to grip and use. They even have soft soles/grips to avoid any marking or damage on the material/work surface.The Stanley Tools FatMax® Clutch Lock F Clamp has the following specification: Clamp Depth: 80mm.Clamp Capacity: 600mm.Clamping Force: 635kg.
The proper tool for driving hardened nails and cold chisels.One-piece steel hammer with Estwing's world famous blue shock reduction nylon vinyl grip.Weight: 1360g (3lb).
These Vitrex Essential Tile Spacers provide an easy way to achieve a more professional tiling finish. They ensure a constant and even spacing of tiles, allowing for the specified size in grout line. The tiles spacers have easily breakable legs for T-shape spacers. Supplied in a resealable bag.The Vitrex 102005 Essential Tile Spacers have the following specifications: Size: 2mm. Pack quantity: 1000.
This unique clamp is specially designed for closing gaps between floorboards before securing them in position. Extremely robust and compact, the clamps are standard equipment for professional flooring contractors, and they are designed to provide a long and reliable service life. The smooth operating bevel gears are fully enclosed in a solid grey iron casing for protection against dust and dirt. Features include strong spring loaded malleable iron cams, a high quality steel main screw and drop handle, and easy portability. Used in pairs, these clamps are easy to operate. When they are pushed down onto the joist, the spring loaded cams adjust automatically to create a positive grip on any joist between 38mm and 89mm (11/2 to 31/2) inches wide. The handle is then rotated to wind the shoe out against the floorboard until it is pushed fully home against the adjoining board and nailed before releasing the clamp.
Flap discs have been developed primarily as an alternative to sanding discs and can be fitted directly onto an angle grinder without a backing pad. Lasting up to 25 times longer than sanding discs they also provide a much better finish which will remain constant throughout the life of the disc. These zirconium flap discs suit the majority of metal grinding applications.Size. 115 x 22 x 60g. Medium.
Hammerite Direct To Rust Metal Paint can be painted directly onto rusty surfaces and, thanks to its special 3 in 1 formula, there is no need to use a primer or undercoat - saving you precious time! Hammerite forms a superior barrier that not only seals out moisture, but also gives long lasting protection, both inside and outside. Touch dry in an hour, Hammerite is corrosion resistant and is suitable for use on a wide range of exterior metal including gates, railings, drainpipes, guttering and garden furniture. Supplied as an aerosol for easy application. Protects for up to 5 years.HMMHFWAERO Direct to Rust Metal Paint has the following specifications:Finish: Hammered.Colour: White.Size: 400ml aerosol.
Flexipads 17096 Dual action orbital sander pad, 150 mm (6in) face to suit dust extraction machines. Medium density with 12mm foam layer. Perfect for Abranet and other 51 hole discs. Hole: 51 HoleType: ABRANETSize: 150 mm (6in)Thread: 5/16 UNFMax RPM: 10000 Made in Great Britain.
The DEWALT 16 Gauge Galvanised 20° Finish Nails have been designed for use with the DEWALT 16 gauge nailer, ensuring fewer jamming or fitment issues. DEWALT nails are made from inspected high quality steel to ensure reliability in performance. Galvanised nails reduce the likelihood of rust or staining.These DEWALT DNBA1644GZ 16 Gauge 20° Finish Nails have the following specification: Length: 44mm.Type: 20° Angled Nails.Finish: Galvanised.Gauge: 1.6 (16GA).Box Quantity: 2500.
The Shurtape Original Cloth Duck Tape® is ideal for fixing, binding, repairing, protecting, identifying and reinforcing tasks. It is strong, waterproof, tears easily and is for use both indoors and out. Ideal for hundreds of uses around the home, garage and garden with high strength adhesive - sticks firmly to most surfaces. Not suitable for total immersion in water.This Duck Tape® Original comes in the following: Colour: SilverWidth: 50mm (2in)Length: 25m
The Roughneck E-Z Read® Tape Measure is a premium grade product designed with the professional in mind. The outer casing is manufactured from a non-slip, shockproof rubber and is further complimented with a strong metal belt clip and powerful blade brake. The rustproof blade is nylon coated for maximum durability, with metric and imperial graduations and is fitted with a 3 rivet reinforced end hook. E-Z Read® blades, where every 1/8in is marked for easy reading, stud marking every 16in and truss marking every 40cm.This Roughneck E-Z Read® Tape Measure has metric and imperial graduations. Blade Length: 10m/33ftBlade Width: 30mm
This RST Drywall Putty Knife is a drywall lining tool. It has a comfortable soft touch handle which provides excellent grip.Flexible blade. Size: 15.2cm (6 inch).
Senco DuraSpin® Collated Screws for Drywall to Wood applications. Phillips No.2 drive, black phosphate finish, coarse thread, bugle head. 50 screws per strip. CE-marked (EN145566). Suitable for both cordless and mains operated machines.Senco DuraSpin® Collated Screws for Drywall to Wood. Size: 4.5 x 75mm.
Polycell Crack-Free Ceilings is a great way to restore cracked ceilings to a smooth, new-looking finish. Its flexible paint formulation uses Polyfilla technology to not only permanently cover cracks and stains, but prevent them from reappearing. For indoor use on plaster, plasterboard and masonry. Drying time: Surface dry in 2-3 hours (depending on conditions).Size: 5 litres. Finish: Matt.
Hammerite Direct To Rust Metal Paint can be painted directly onto rusty surfaces and, thanks to its special 3 in 1 formula, there is no need to use a primer or undercoat - saving you precious time! Hammerite forms a superior barrier that not only seals out moisture, but also gives long-lasting protection, both inside and outside. Touch dry in an hour, Hammerite is corrosion resistant and is suitable for use on a wide range of exterior metal including gates, railings, drainpipes, guttering and garden furniture. The paint has a subtle hammered effect with a metallic sheen. Protects for up to 8 years.This Hammerite ;Direct to Rust Metal Paint ;has the following specification: Finish: Hammered.Colour: Gold.Size: 250ml.
Masterplug Connector Strips are manufactured from thermoplastic. Snap-off spine design. Fully backed out screws to speed installations. Manufactured to BS EN 60998 2-1.10 x Masterplug Connector Strips 5A 12W
Silicone 200 Contractors is a cost effective acetoxy cure sealant that adheres to most smooth and non-porous materials. This product contains an anti-fungal compound to prevent mould growth in areas of high humidity. SILICONE 200 is mid to low modulus in nature. Conforms to BS5889. - Permanently flexible.- Anti-fungal formula - prevents mold growth.- Quick curing - low dirt pick up.- Low viscosity for fast application. Areas for Use: - Sealing glass to glass.- Sealing glass to aluminium and metal sealing.- Sealing around baths, showers, basins and other sanitary ware.- As an adhesive for fixing PVCu trims, cladding and panels.- Sealing around worktops and laminates.- Cap glazing to metal, timber and PVCu window frames, and pointing around window and doorframes.- For aluminium gutter sealing.- General draughtproofing.Colour: Translucent Size: 295ml
Ronseal Diamond Hard Floor Paint colours and protects interior wood, concrete and stone floors. It is hard-wearing and protects against knocks, scuffs, scrapes and spills. Resists flaking, peeling and chipping, bleach, alcohol, grease and dirt. Specification: Approx. Coverage: 12m² per litreApplication: Brush or RollerDrying Time: 4 HoursRecoat: 4-6 HoursRecommended Number of Coats: 3This Ronseal Diamond Hard Floor Paint has the following specification: Colour: BlackFinish: SatinSize: 2.5 Litre
Hammerite Direct To Rust Metal Paint can be painted directly onto rusty surfaces and, thanks to its special 3 in 1 formula, there is no need to use a primer or undercoat - saving you precious time! Hammerite forms a superior barrier that not only seals out moisture, but also gives long lasting protection, both inside and outside. Touch dry in an hour, Hammerite is corrosion resistant and is suitable for use on a wide range of exterior metal including gates, railings, drainpipes, guttering and garden furniture. Protects for up to 8 years.HMMSATBL750 Direct to Rust Metal Paint has the following specifications:Finish: Satin.Colour: Black.Size: 750ml.
Hammerite Direct To Rust Metal Paint can be painted directly onto rusty surfaces and, thanks to its special 3 in 1 formula, there is no need to use a primer or undercoat - saving you precious time! Hammerite forms a superior barrier that not only seals out moisture, but also gives long lasting protection, both inside and outside. Touch dry in an hour, Hammerite is corrosion resistant and is suitable for use on a wide range of exterior metal including gates, railings, drainpipes, guttering and garden furniture. Protects for up to 8 years.This Hammerite Direct to Rust Metal Paint has the following specifications: Finish: Smooth.Colour: ;Black.Size: 5 Litre.
Trend Craft Pro Two Fluted Tungsten Carbide Tipped straight cutters are suitable for a wide range of applications such as engraving, grooving, rebating and shallow morticing. They can be used on a wide range of materials such as softwoods, hardwoods, MDF, plywood and chipboard. All cutters are TCT and have a bottom cut feature. When deep cuts are required, more than one pass should be taken. Shank: 1/4inD - Diameter - 1/2in 12.7mmC - Cutting Length - 1 1/4 31.8mmT.C.T. 2 Flutes.
The HiKOKI C7 ST Circular Saw has a powerful motor and an adjustable steel base for cutting bevels up to 45°. Its dust blower ensures that the cutting line is easily visible and no riving knife enables easier plunge cutting. External brush caps allow easy maintenance and the spindle lock allows easy blade replacement. Supplied with: 1 x TCT Blade 216 x 30mm x 18T, 1 x Guide, 1 x Wrench & 1 x Carrying Case. Specification: Input Power: 240V: 1,710W, 110V: 1,560WNo Load Speed: 6,000/min. Max. Cutting Depth: @90° 62mm, @45° 47.5mmBlade: 185 x 30mm BoreWeight: 4.3kg1 x HiKOKI C7 ST Circular Saw 185mm 1710W 240V
The HiKOKI C7 ST Circular Saw has a powerful motor and an adjustable steel base for cutting bevels up to 45°. Its dust blower ensures that the cutting line is easily visible and no riving knife enables easier plunge cutting. External brush caps allow easy maintenance and the spindle lock allows easy blade replacement. Supplied with: 1 x TCT Blade 216 x 30mm x 18T, 1 x Guide, 1 x Wrench & 1 x Carrying Case. Specification: Input Power: 240V: 1,710W, 110V: 1,560WNo Load Speed: 6,000/min. Max. Cutting Depth: @90° 62mm, @45° 47.5mmBlade: 185 x 30mm BoreWeight: 4.3kg1 x HiKOKI C7 ST Circular Saw 185mm 1560W 110V
The Knipex CoBolt® compact bolt cutters give an exceptional cutting performance with minimum effort because of their effective lever action design. The lever action guarantees an extremely favourable lever ratio with low friction, and cutting performance is 30 times higher than the hand force applied (Requires 60% less effort). Cuts components like bolts, nails, rivets, etc. up to 6mm dia. The recess in the blade allows easier cutting of thicker wires, e. g. for anchor bolts in false ceilings. Cutting Capacity (mm): Piano: 3.6, Hard: 4.0, Soft: 6.0.
Faithfull aluminium oxide resin bonded onto a durable X-Weight cloth belt for high-speed industrial use on ferrous metals and hardwoods and suitable for both stock removal and finishing applications. The belts are bi-directional, and benefit from butt joints and smooth slot to ensure scuff-free performance.Pack of 3 Faithfull Cloth Sanding Belt 533 x 75mm Fine
The Faithfull Classic Tapered Mortice Pattern Mallets for general joinery work.Made from straight grained beech to provide the required weight and resistance against splitting.The morticed head and tapered handle maintain a perfect and secure fit.The striking surfaces of the head are angled toward the user and ensure a square-on delivery with each blow.Size: 127mm (5in) Weight: 540g
The Faithfull Carpenters Tool Kit has been specially commissioned to provide the essentials you need for working with wood. All the tools are made to the highest quality from the finest hardwood, brass and steel. The set includes: Traditional No.4 Smoothing Plane60.1/2 Block Plane230mm Try Square230mm Sliding BevelMortice and Marking Gauge They all come with the confidence of a 5-year guarantee. This is a super gift for the professional, enthusiast or apprentice. Presented in a hinged wooden case.
