These Forgefix round coaxial cable clips have hardened masonry nails for increased efficiency, and which will fix into timber, block work and mortar.They are specifically designed for and will suit most TV and Satellite installations. Size: 6-7mm.Cable Clip Round Coax Brown 6-7mm Box 100
These ForgeFix ForgeFast Wood Screws have a universally accepted, Pozi compatible drive. They have 6 underhead lobes for improved countersinking and reduced surface dust, and reinforced countersunk necks which improve holding power. The screws have an anti-friction thread for reduced splitting of the timber, reduced 'jacking' and spinning of joined timber and improved drawing strength. The thread is serrated for improved pull-out and reduced torque when inserting the screw. The double cutting point allows faster drilling time and reduced clogging of wood dust and is capable of piercing 0.8mm steel. The screws have a 'Elementech 400' coating providing an anti-corrosive metal finish, which lasts up to 6 times longer than standard zinc coatings. The coating is environmentally friendly and does not contain Cr6+. It is Salt Spray tested to 400 hours. The screws are suitable for interior use.Size: 4.5 x 60 mm.Box quantity: 100.
ForgeFix ForgeFast Wood Screws have a universally accepted, Torx® compatible drive. Their recessed ribs provide improved countersinking and reduced surface dust, and their reinforced countersunk necks improve holding power. The screws have a patented drill and drive thread for reduced splitting of the timber, reduced 'jacking' and spinning of joined timber, increased pull-out and a firmer fix. A sharp point provides faster bite and is capable of piercing 0.8mm steel. The screws have an 'Elementech 400' coating providing an anti-corrosive metal finish, which lasts up to 6 times longer than standard zinc coatings. The coating is environmentally friendly and does not contain Cr6+. It is Salt Spray tested to 400 hours. The screws are suitable for interior use. Every box is supplied with a Torx® compatible bit.Size: 4.5 x 50mm.Box quantity: 200.
These Forgefix Oval Lost Head Nails are versatile and ideal for use in general joinery. The nail head virtually disappears when punched below the timber surface, making them ideal for decorative type applications. The shape of the nail helps to prevent splitting of hard or brittle timber. The nails have a 'Bright' finish, which is simply the basic raw mild steel material, without any coating or finish. APPLICATION:General cross section of joinery applications. By aligning the nail with the wood grain, splitting is reduced.Oval Lost Head Nail Bright Finish 75mm Bag Weight 250g
These Forgefix Screw Eyes are Zinc Plated for increased resistance to corrosion. They simply screw directly into timber and similar materials. Drilling a pilot hole is advisable. The screws are also suitable for use with all types of wall plugs. APPLICATIONScrew Eyes are used to attach cables, wires and twine to numerous applications. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminum and stainless steels by their oxide layers.Screw Eyes ZP 25 x 4Ga Bag 10
Forgefix TechFast Roofing Sheets to Steel Hex Screws are used for joining metal roofing panels to steel frame buildings. The screws are fire resistant and corrosion resistant. Protected by Elementech corrosion resistant coating, salt spray tested to 1000 hours. Complies with EU Safety, Health and Environmental requirements. They are supplied with 16mm EPDM rubber washers.These Forgefix TechFast Roofing Sheets to Steel Hex Screws have the following specification: Size: 5.5 x 50mmEffective Thread Length: 33mmPack Size: 100Drill Tip: No.3 No.3 drill tip for self-drilling in heavy gauge steel up to 5mm.
These ForgeFix Don Quichotte Heavy Gauge Masonry Nails have the following specification: Size: 3.5 x 80mmFinish: Zinc GalvanisedPack Quantity: Box of 100
Main Product Description:
The FloPlast 114mm Square Union Bracket in brown is a high-quality, cost-effective solution for connecting two lengths of gutter together in a run. It is made from PVC-U, a material that is not easily ignitable and does not support combustion, ensuring safety and durability. The bracket comes with a pre-lubricated seal for improved performance and ease of installation.
Features:
- Made from non-combustible PVC-U material
- Pre-lubricated gutter seals for smooth operation
Benefits:
- Enhanced safety due to non-combustible properties
- Easy installation with pre-lubricated seals
The Roughneck Pallet Buster is ideal for demolishing all types of pallets. It’s basic functions are based on the very popular and best selling Demolition & lifting Bar but with a number of major improvements. Such as a more convenient head to handle angle and a longer handle resulting in the need to bend less for ease of operation. The jaw spacing has been increased to work on Euro pallets as well as incorporating a nail remover. Supplied with a double injected soft grip handle for comfortable use.
The Apache APKHT TWO Black Holster Trousers are an upgrade on the old reliable APKHT style. With the same great qualities, the trouser has just been modernised for additional comfort. Made from a 64% polyester, 33% cotton and 3% elastane, stretch fabric with a stretch yoke and gusset. This is to give you greater ease of movement for when you are on site all day. Double layer material on the thigh increases garment durability. It also features durable cordura branded knee pad pockets, hem and holster pockets. The elasticated waist allows the trouser to move with you. The fit has been slimmed down very slightly taking you to a regular fit. Specifications: Material Composition: 64% Polyester, 33% Cotton 3% elastane.Material Weight: 280 GSM.
FatMax® VDE Long Nose Pliers manufactured to exacting European standards individually tested to 10,000 volts and approved for working around live circuits that do not exceed 1,000 volts. The bi-material handles offer the user improved control and grip, incorporating slip guard shoulders for additional safety. They are made from a heat treated, high chrome steel forging for long life and have hand ground, induction hardened blades. DIN/ASO/ANSI compliant. Ideal for maximising grip and manoeuvring of small objects in confined spaces.Length: 200mm (8 in)
SafetySure RCD Plugs and Adaptors fully comply with BS 7071 & BS 1363. The RCD Plug & Adaptors are clam packed. No wiring needed - it simply plugs in Electrically latched - reset on power loss Technical Data: Rated voltage 230V AC 50Hz - Max operating current: 13A (3A inductive) - Rated trip current: 30mA - Typical trip speed
Choose this stop end to cap off pipework as part of a temporary or permanent installation. Part of the JG Speedfit plastic push-fit system, the 22mm stop end is easy to fit, and is demountable without tools – it can be quickly removed whenever you need to resume work or extend the system.
The stop end is really useful if you have to pause your job for any reason, or if the water needs to be turned back on overnight. It’s also very helpful when pressure-testing a system before appliances are connected.
• Caps off pipework quickly and easily
• Install in seconds by hand – just push it fully onto the pipe
• Tool-free demounting means you can resume work quickly
• Suitable for hot and cold water services, central heating systems and combi systems
• Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
• Minimum operating temperature of 20 °C
• Maximum operating temperature of 105 °C
• Maximum operating pressure at minimum temperature of 12 bar
• Maximum operating pressure at maximum temperature of 3 bar
• BS EN 7291 Parts 1, 2, 3 and S
• WRAS-approved
Technical specification
Brand JG Speedfit
Colour White
Material Plastic
Manufacturer ID PSE4622W
Warranty (years) 50
Diameter (mm) 22
Pack Size 2
Fitting Type Stop End
1 x ITL Insulated 1/2in Drive Socket (6 Point) 13mm. The ITL Insulated 1/2in Drive Socket (6 Point) are made from injection moulded nylon 11, which exceeds the requirements of IEC 60900, the industry standard for live line working. In addition, they meet the requirements of Category 'C', which requires it to perform at extreme temperatures of -40°C to ;70°C, making it unique in this category. 13mm
Command™ Outdoor Decorating Clips provide an innovative solution for hanging decorations and other lightweight objects in your garden and around the outside of your home. 3M stretch-release technology provides a strong hold and removes cleanly. Hang lights and small decorations outside without causing damage to surfaces. They’re easy to apply and remove - leaving no holes, marks or sticky residue. Rearranging them is as easy as applying a Command™ Water-Resistant Refill Strip, so you can take them down, move and reuse them again and again. These all-season, all-weather strips hold strongly to a variety of surfaces including solid, hollow and painted walls, as well as other smooth materials including wood, UPVC and glass. Contains: 20 x Clear Outdoor Decorating Clips24 x Water-Resistant Refill Strips
1 x ITL Insulated Inspection Mirror. The ITL Insulated Inspection Mirror with bent hosel to help inspect hard to reach places. Made from injection moulded nylon 11, which exceeds the requirements of IEC 60900, the industry standard for live line working. In addition, this tool meets the requirements of Category 'C', which requires it to perform at extreme temperatures of -40°C to ;70°C, making it unique in this category. These insulated tools are the toughest in the market, being virtually indestructible. With a lifetime warranty on both the tool and insulation. Small
The ABUS T65AL Series Coloured Padlocks have a precision extruded, cut and drilled pure aluminium body which is light and strong, through hardened shackle, zinc plated brass lock mechanism which prevents chemical corrosion and a rust-free, 5-pin tumbler mechanism. The padlock's coloured coating is a special formula which allows you to write your name or other information using coloured pens or permanent markers. Specifiation ABUS Security Level: 5. Shackle Width: 22mm.Shackle Height: 22.5mm.Shackle Diameter: 6.5mm. Overall Width: 40mm.Overall Height: 62mm.Overall Depth: 15mm.1 x ABUS T65AL/40mm My Lock Aluminium Padlock Yellow Keyed Alike Key Reference: 6401.
The McAlpine Stainless Steel Strainer Plug is a plumbing accessory designed to prevent debris from clogging the drain pipe in sinks or basins. This strainer plug has a stainless steel construction which makes it durable and resistant to corrosion. It has a domed shape with small perforations on the surface which allows water to pass through while catching larger debris like food scraps or hair. The strainer plug is easy to install and remove, and it comes with a chain for easy retrieval. This product is suitable for use in both commercial and residential settings.
・ Mounted on Card with Hanging Slot
・ Stainless Steel Strainer Plug
・ Supplied with Rubber Seal
The Starrett TCT Stainless Steel Holesaws are ideal for cutting high alloy and stainless steels, non-ferrous light metals and reinforced fabrics at much faster speeds than is possible with a bi-metal holesaw. Tough tungsten carbide tipped teeth have a positive cutting angle which provides fast and efficient removal of chips and swarf. They have a solid one-piece construction, with complete assembly including arbor and pilot drill. A split-point drill bit allows for faster penetration and self-centring helping keep the drill on target and to prevent wandering. Fitted with ejector spring for easy core removal. Ideal for production cutting, and particularly suitable for use in drills with limited speed control. Recommended for cutting sheet metal up to 3mm (1/8in) thick.
The Starrett Fractional Display Caliper is lightweight, comfortable, and easy to use. Made from hardened stainless steel, it has a slim profile and a clear LCD display, reads 0.01mm, .0005in or 1/64in. The display includes function buttons for zeroing and unit switching (mm, inch, F). A fine adjustment thumb wheel allows for easy measuring and a lock screw to secures the slide position. To save battery life it has an auto-off after 5 minutes. It also features a low battery warning system with flashing display and a USB port for data output. Comes with: a battery cover wrench for easy access and a hardwearing case. Conforms to DIN862 standard. Specifications: Power: Single SR44/LR44 Long-life Battery.Max. Measuring Speed: 1.5m/sec or 60in/sec.1 x Starrett Fractional Display Caliper 200mm.
The Starrett Deep Cut Bi-Metal Holesaws combine the tried and tested tooth form used on the previous Dual Pitch Holesaw, with a new tooth material for enhanced heat and wear resistance. The Deep Cut saw also features an increased hole saw depth of 51mm (2in), and is ideal for cutting metal of more than 3mm thickness, tubes with a wall thickness of greater than 3mm and wood up to 51mm (2in) thick. Cutting Depth: 51mm.Starrett DCH0178 Deep Cut Bi Metal Holesaw has the following specification: Diameter: 48mm (1.7/8in).
Precision ground, super-efficient bi-metal blade which is faster and lasts longer on tough materials. The high-speed steel cutting edge is welded to a tough alloy steel back providing optimum tool life together with a high resistance to breakage. Blade cross section 13 x 0.65 mm (1/2 x 0.025 Inch).Pack of 2 Starrett Bi-Metal Unique Safe-Flex Hacksaw Blades 300mm (12in) x 18 TPI.
The Starrett SDS Plus Arbor comes with a high speed pilot drill. Allows the arbor to be used in SDS-Plus rotary hammer drills, with the hammer action turned off. The Starrett A1-1 SDS Plus Arbor made for use with holesaws ranging from 32-210mm. Quick-Hitch arbors feature two locating pins inserted into the holesaw cap to prevent the holesaw overtightening on the screw thread. This allows easy and instant holesaw changes, without tools and without removing the arbor from the chuck. Specifications: Holesaw Pairing: FCH and CT.Holesaw Diameter: 32-210mm (1.1/4-8.9/32in).Arbor Shank Sizes: 11mm (7/16in) hex (excluding SDS-Plus Arbors).Screw Thread: 5/8in-18.Chuck Size: 13mm (1/2in).Drill: HSS Drill Length: 79mm (3.1/8in).
The Starrett Fractional Display Caliper is lightweight, comfortable, and easy to use. Made from hardened stainless steel, it has a slim profile and a clear LCD display, reads 0.01mm, .0005in or 1/64in. The display includes function buttons for zeroing and unit switching (mm, inch, F). A fine adjustment thumb wheel allows for easy measuring and a lock screw to secures the slide position. To save battery life it has an auto-off after 5 minutes. It also features a low battery warning system with flashing display and a USB port for data output. Comes with: a battery cover wrench for easy access and a hardwearing case. Conforms to DIN862 standard. Specifications: Power: Single SR44/LR44 Long-life Battery.Max. Measuring Speed: 1.5m/sec or 60in/sec.1 x Starrett Fractional Display Caliper 300mm.
Starrett Tungsten Carbide Tipped Fast Cut Multi Purpose Holesaws are the perfect tool for users from construction and installation engineers to the diy enthusiast. Offering very fast cutting times, and outstanding life,these MPH saws will power through wood, MDF, plastics and ceramic wall tiles. Advantages: Carbide tipped teeth for outstanding cutting performance and product durability. Smooth cut, with minimal heat build up. Cutting depth 54 mm (2 1/8in), allowing use for cutting through strapping and joists. Suitable for use in mains and battery powered tools. Multiple uses - cutting wood, mdf, plastics, ceramic wall tiles and building bricks.The increased cutting depth allows for cutting through strapping and joists
The Starrett Deep Cut Bi-Metal Holesaws combine the tried and tested tooth form used on the previous Dual Pitch Holesaw, with a new tooth material for enhanced heat and wear resistance. The Deep Cut saw also features an increased hole saw depth of 51mm (2in), and is ideal for cutting metal of more than 3mm thickness, tubes with a wall thickness of greater than 3mm and wood up to 51mm (2in) thick. Cutting Depth: 51mm.Starrett DCH0434 Deep Cut Bi Metal Holesaw has the following specification: Diameter: 121mm (4.3/4in).
The Starrett SDS Plus 4 Point Drill Bit comes with high performance carbide tips and a cross head design for consistent performance. This head design provides 4 vertical debris removal channels for faster material penetration and maximum debris removal. The drill body offers superior strength thanks to its specialised heat treatment, enabling it to withstand the most demanding of applications. PGM certified.This Starrett SDS Plus 4 Point Drill Bit has the following specifications: Diameter: 16mm.Overall Length: 460mm.Working Length: 400mm.
Starrett Tungsten Carbide Tipped Fast Cut Multi Purpose Holesaws are the perfect tool for users from construction and installation engineers to the diy enthusiast. Offering very fast cutting times, and outstanding life,these MPH saws will power through wood, MDF, plastics and ceramic wall tiles. Advantages: Carbide tipped teeth for outstanding cutting performance and product durability. Smooth cut, with minimal heat build up. Cutting depth 54 mm (2 1/8in), allowing use for cutting through strapping and joists. Suitable for use in mains and battery powered tools. Multiple uses - cutting wood, mdf, plastics, ceramic wall tiles and building bricks.The increased cutting depth allows for cutting through strapping and joists. Size: 20mm
These Starrett Bi-Metal Reciprocating Blades have the following specification: ID: BT12610-5Application: 3X POWER - MultipurposeApplication Material Thickness: 13-63mm (1/2-2.1/2in)Dimensions: 300 x 19 x 1.30mm (12 x 3/4 x 0.050in)TPI: 6-10 Blade Shape: TaperedPack: Plastic TubePack Quantity: 5
The Starrett Fractional Display Caliper is lightweight, comfortable, and easy to use. Made from hardened stainless steel, it has a slim profile and a clear LCD display, reads 0.01mm, .0005in or 1/64in. The display includes function buttons for zeroing and unit switching (mm, inch, F). A fine adjustment thumb wheel allows for easy measuring and a lock screw to secures the slide position. To save battery life it has an auto-off after 5 minutes. It also features a low battery warning system with flashing display and a USB port for data output. Comes with: a battery cover wrench for easy access and a hardwearing case. Conforms to DIN862 standard. Specifications: Power: Single SR44/LR44 Long-life Battery.Max. Measuring Speed: 1.5m/sec or 60in/sec.1 x Starrett Fractional Display Caliper 150mm.
Starrett Tungsten Carbide Tipped Fast Cut Multi Purpose Holesaws are the perfect tool for users from construction and installation engineers to the diy enthusiast. Offering very fast cutting times, and outstanding life,these MPH saws will power through wood, MDF, plastics and ceramic wall tiles. Advantages: Carbide tipped teeth for outstanding cutting performance and product durability. Smooth cut, with minimal heat build up. Cutting depth 54 mm (2 1/8in), allowing use for cutting through strapping and joists. Suitable for use in mains and battery powered tools. Multiple uses - cutting wood, mdf, plastics, ceramic wall tiles and building bricks.The increased cutting depth allows for cutting through strapping and joists
The Starrett Deep Cut Bi-Metal Holesaws combine the tried and tested tooth form used on the previous Dual Pitch Holesaw, with a new tooth material for enhanced heat and wear resistance. The Deep Cut saw also features an increased hole saw depth of 51mm (2in), and is ideal for cutting metal of more than 3mm thickness, tubes with a wall thickness of greater than 3mm and wood up to 51mm (2in) thick. Cutting Depth: 51mm.Starrett DCH0414 Deep Cut Bi Metal Holesaw has the following specification: Diameter: 108mm (4.1/4in).
The Starrett Deep Cut Bi-Metal Holesaws combine the tried and tested tooth form used on the previous Dual Pitch Holesaw, with a new tooth material for enhanced heat and wear resistance. The Deep Cut saw also features an increased hole saw depth of 51mm (2in), and is ideal for cutting metal of more than 3mm thickness, tubes with a wall thickness of greater than 3mm and wood up to 51mm (2in) thick. Cutting Depth: 51mm.Starrett DCH068M Deep Cut Bi Metal Holesaw has the following specification: Diameter: 68mm (2.11/16in).
Starrett Tungsten Carbide Tipped Fast Cut Multi Purpose Holesaws are the perfect tool for users from construction and installation engineers to the diy enthusiast. Offering very fast cutting times, and outstanding life,these MPH saws will power through wood, MDF, plastics and ceramic wall tiles. Advantages: Carbide tipped teeth for outstanding cutting performance and product durability. Smooth cut, with minimal heat build up. Cutting depth 54 mm (2 1/8in), allowing use for cutting through strapping and joists. Suitable for use in mains and battery powered tools. Multiple uses - cutting wood, mdf, plastics, ceramic wall tiles and building bricks.The increased cutting depth allows for cutting through strapping and joists. Size: 22mm
The CarPlan Re-Usable Car Dehumidifier helps to prevent in-car condensation, clouded windows, mould and mildew. Contains Silica Drying Gel which absorbs humidity and excess moisture from inside your vehicle. Reusable simply place in the microwave for 6 mins to refresh. The built-in indicators lets you know when the dehumidifier needs refreshing. Also suitable for drawers and cupboards.
