The Facom 6-Point Stubby Impact Socket are made from Chrome Molybdenum steel, tempered via a heat treatment for increased durability. Coated with manganese phosphate for higher protection and corrosion resistance. Its cross hole design prevents unintentional separation of adapter and socket. The stubby design gives greater accessibility in tight or hard to reach applications due to 25% shorter length.1 x Facom 6-Point Stubby Impact Socket 1/2in Drive 21mm
These Facom 44 open-end wrenches/spanners come in metric sizes and are finished in satin chrome, which is both attractive and hard-wearing. The wrenches are double-ended with two different, fixed size heads. The wrench is flat, with heads slightly tilted away from the axis of the handle. This allows a greater range of movement, making them ideal for use in confined spaces. Performance: conform to ISO 10102, DIN 3110, NF ISO 3318 and NF ISO 10102.The FCM441011 Open End Spanner has the following specifications:Head sizes: 10 x 11mm.Length: 152mm.Weight: 47g.
The Facom 440 OGV® metric combination wrenches combine high mechanical performance with compact design, complying with aeronautical standards. Ring clearance is designed for better access to recessed or closely spaced screws and the 12-point OGV® profile of the 15º angled ring head allows for a high torque without damaging the nut. The wrenches have optimised open end / handle geometry, offering increased accessibility and feature ground contact faces. Finished in satin chrome. Industrial and automotive: Conforms to ISO 691, NF ISO 691, ISO 7738, NF ISO 7738, ISO 3318, NF ISO 3318, ISO 1711-1, NF ISO 1711-1 and NF E74-306.Aerospace : Conforms to SAE AS 954E.The FCM4404 Combination Spanner has the following specifications:Head size: 4mm.Length: 106mm.
The Facom 'S' extensions have a 1/2 inch drive to fit 1/2 inch sockets or ratchets. Their extra length means that hard-to-reach bolts and other fasteners are easily accessed for loosening or tightening. The extensions are finished in polished chrome. Performance: Conform to ISO 3316, DIN 3123 and NF ISO 3316.The FCM208 extension has the following specifications:Length: 75.0mm.Weight: 130g.
The Facom Long Metric Head Torx® Hex Key comes packed in a compact wallet for easy selection of the dimesion required. They are also complant with Torx® and Resistorx® specifications. The hex keys in this set have long spherical heads. Sizes: T10, T15, T20, T25, T27, T30, T40 & T45.
These Facom 12-point OGV sockets have a 3/8 inch drive to fit 3/8 inch ratchets. The sockets are long-reach, and their OGV profile allows tightening torque to be applied to the sides, rather than to the angles of the nut/bolt. They are an excellent choice for tightening/loosening harder to reach nuts, bolts and other fasteners. Available in a range of different metric sizes. Performance: conform to ISO 2725-1, DIN 3124 and NF ISO 2725-1.The FCMJ13LA Deep Socket has the following specifications:Socket size: 13.0mm.Length: 55mm.
3 Piece DEWALT Compound Action Pliers Set. All pliers feature induction hardened cutting blades for 70% more cutting power over standard cutting pliers. Fitted with bi-material handles for a strong grip and added comfort. Contains:1 x Compound Action Diagonal Pliers 190mm.1 x Compound Action Linesman Pliers 200mm.1 x Compound Action Long Nose Pliers 190mm.
The Airmaster PTC Floor Standing Heater is made with a ceramic element for quick efficient heating. It has two heat settings (1,000W/2,000W) which can be switched off for use as a cooling fan during hot weather. Fitted with a comfortable carry handle for easy positioning/repositioning. Suitable for heating rooms/workspaces up to 30m³. Specifications: Input Voltage: 240V (50Hz).Output Rating: 1,000W/2,000W.Dimensions: 190 x 215 x 158mm.IP Rating: IP55.Cable Length: 1.6m.
These Forgefix Pozidriv Self-Tapping Screws are zinc plated for increased resistance to corrosion. Their Pan Head, with a flat under head surface makes the screw ideal to lay flat on sheet material of all types, thus reducing deformation. The screws tap their own thread in a pre-drilled pilot hole, in sheet metal. The screws are single threaded to resist pull-out. APPLICATIONIdeal for use in many DIY, ironmongery, engineering, electrical and plumbing applications. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminum and stainless steels by their oxide layers. The Pozidriv screw is similar in appearance to the classic Phillips cross-head, but in fact is very different. The Pozidriv has four additional points of contact, and does not have the rounded corners that the Phillips screw drive has. The biggest advantage it offers is that, when used with the correct tooling in good condition, it does not cam out, allowing great torque to be applied. The Pozidriv screw can easily be distinguished by a line embossed in the screw head at 45° to the slots for the driver.Self Tapping Screw Pozi Pan Head ZP 3/4 x 8 Box 200
The DEWALT Compact Series Tape Measure easily fits in your hand, tool box or pocket. The durable, coated steel blade is ideal for use in tough conditions. 3m of extended reach allows easy one person work. It also enables you to measure without blade kinking. Fitted with a finger brake for ultimate blade control, helping you to get the job done quickly and easily.Accuracy: EC Class II.
1 x DEWALT Compact Tape Measure 5m/16ft (Width 28mm).
These Forgefix Universal Fixing Plugs are made from 100% Nylon, providing excellent strength and durability. They are quick and easy to install and provide quicker and greater expansion than normal wall plugs.APPLICATIONSpecially designed for use with lightweight blockwork, aerated hollow block and plasterboard.Suitable for fixing all manner of lightweight fixtures such as shelving, batons, brackets and many other applications.Universal Fixing Plug M6 x 38 Bag 25
These Forgefix Screw Cup Washers have a solid brass finish to avoid corrosion. They are quick and easy to install, with no need to countersink screws. APPLICATIONTo enable flush finish in numerous joinery installations.Can be used with most screw types.Screw Cup Washers Solid Brass Polished No.10 Bag 200
The DEWALT Compact Series Tape Measure easily fits in your hand, tool box or pocket. The durable, coated steel blade is ideal for use in tough conditions. 3m of extended reach allows easy one person work. It also enables you to measure without blade kinking. Fitted with a finger brake for ultimate blade control, helping you to get the job done quickly and easily.Accuracy: EC Class II.
1 x DEWALT Compact Series Tape Measure 8m (Width 28mm) (Metric Only).
These Forgefix Sleeve Anchors are through fixing, for ease of use and speed of installation. Their sleeve wedge cones are designed to give maximum expansion even in shallow anchoring depths. They have a reduced outside sleeve diameter compared to thread size for smaller hole sizes, offering reduced stress in base materials. The anchors are Zinc Yellow Passivated for increased resistance to corrosion and have hexagonal heads. Also known as 'Loose Bolt' sleeve anchors. APPLICATIONWidely used for fixing balustrades, handrails, racking and holding down machinery, plus many more installation applications.Ensure the correct socket drive or spanner is used to ensure accurate installation. The Zinc Yellow Passivation process of electroplating is similar to the 'Galvanised' and 'Zinc Plated' processes but with the addition of a yellow dye. It provides a coating that is aesthetically pleasing, and which offers excellent resistance to corrosion. The hexagonal head has been designed for use with spanners or sockets and offers maximum torque when used with these tools.Sleeve Anchor Fixing Hex Bolt M12 x 129 Bag 5
These Forgefix Twist Nails are a unique twisted shank nail for attaching metalwork joists, hangers, straps etc. The twisted shank assists in absorbing movement that may occur in construction. They have a sheradised finish for corrosion resistance. This finish is a thermal diffusion process, in which Zinc powder is vaporised and diffuses to the surface of the Twist Nail to form a sacrificial corrosion protective Zinc/Iron alloy coating, thus dramatically increasing the nails' durability. APPLICATION:The Twist Nail is the most popular construction nail used in fixing of joist hangers, restraining straps and Galvanised banding.Twist Nails Sheradised 30mm Bag Weight 2.5kg
These Forgefix, Multi-Purpose Pozi Compatible Screws feature a countersunk, pozidrive compatible, recessed head. They have a zinc yellow passivated finish offering more corrosion resistance than zinc plated products, thanks to an additional passivation process.They offer quick and easy insertion due to an extra deep insert bit recess, enabling a firmer, more positive drive. The single thread, and special wax coating, increase speed and ease of insertion. The single thread design also provides increased holding power, particularly when used with particle boards like MDF.The Forgefix screws are highly versatile and immensely popular, these single thread screws are perfect for a whole host of fixing needs, and are ideal for fixing into a range of substrates including softwoods, hardwoods, chipboards and fibreboards.They are suitable for numerous ironmongery, joinery, electrical and plumbing applications.Supplied in a handy ForgePack.
ForgePack of 20 ForgeFix Multi-Purpose Pozi Screws CSK ST ZYP 4.0 x 25mm
These Forgefix Phillips, single thread Drywall Screws have a black phosphate finish for increased durability. The screws come complete with a Phillips No.2 insert bit. Their Bugle Head allows the screw to sink effortlessly into the dry lining without the need for countersinking, which in turn minimises the damage to the surface. APPLICATION:Designed for fitting dry linings to studding. Phosphate coatings are made up of thin crystalline layers of phosphate compounds that adhere to the surface of the fixing or fastener. The phosphate crystals are porous and can be formed from zinc, manganese, or iron phosphate solutions. Phosphate coatings offer good corrosion resistance and have an excellent ability to absorb supplementary coatings which improves appearance, corrosion resistance and resistance to abrasion. The Phillips screw has four simple tapered slots. It is designed so that a Phillips tip screwdriver can turn a Phillips screw with increasing torque. When the torque gets to be too strong for the tip then the screwdriver tip winds itself out of the screw thus preventing over-tightening and or damage to the screw head. Coarse thread screws (mainly drywall screws) have an extremely sharp point and are designed to penetrate plasterboard skin. The coarse thread eases in to the board then the timber baton holding the board firm.Drywall Screw Phillips Bugle Head SCT Black Phosphate 4.2 x 65mm Bulk 500
The ForgeFix TechFast Masonry CSK Screw is a self-tapping, no stress alternative to plastic plugs. With an easy 2-step installation: drill a hole in substrate and screw in with power tool. These screws have a countersunk head with TORX® compatible recess. Protected by an Elementech coating, fire and corrosion resistant. Salt spray tested to 1,000 hours. Complies with EU Safety, Health and Environmental requirements. Supplied with a T20 Impact Bit.Specification: Size: 6.3 x 57mmPack Quantity: Box of 100
The DEWALT TOUGHSERIES Tape Measure allows you to conveniently measure from any angle. The double-sided blade features a Rip-Shield blade coating that provides increased durability. 16ft of extended reach allows you to easily execute long measurements without assistance. Its ultra-tough housing keeps the tape safe and secure. It's able to survive drops up 30 metres. Fitted with a magnet for easy attachment and measuring from metal surfaces.Accuracy: EC Class II.
1 x DEWALT TOUGHSERIES Tape Measure 5m/16ft (Width 32mm).
ForgeFix ForgeFast Wood Screws have a universally accepted, Torx® compatible drive. Their recessed ribs provide improved countersinking and reduced surface dust, and their reinforced countersunk necks improve holding power. The screws have a patented drill and drive thread for reduced splitting of the timber, reduced 'jacking' and spinning of joined timber, increased pull-out and a firmer fix. A sharp point provides faster bite and is capable of piercing 0.8mm steel. The screws have an 'Elementech 400' coating providing an anti-corrosive metal finish, which lasts up to 6 times longer than standard zinc coatings. The coating is environmentally friendly and does not contain Cr6+. It is Salt Spray tested to 400 hours. The screws are suitable for interior use. Every box is supplied with a Torx® compatible bit.Size: 5.0 x 20mm.Box quantity: 200.
These Forgefix single thread Coach Screws are Zinc plated for increased corrosion resistance. Their hex head enables higher torque capability when tightening, and increased speed of use with socket drivers. These Coach Screws conform to DIN 571 standards. APPLICATION:Used widely in heavier timber installations and for fixing timber to masonry. Also popular as a fixing for satellite dish installation together with a rimmed or rimless wall plug. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust which (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity. Single thread screws have been designed to offer higher pull out values and quicker insertion.
Bag of 10 ForgeFix Coach Screws Hexagon Head Single Thread ZP M10 x 40mm
These Forgefix General Purpose Pozi Screws with countersunk heads have an electro brassed finish for increased durability and to suit most internal and decorative requirements. They are versatile screws, ideal for use in and with many materials. APPLICATION:Ideal for use in many decorative installations.Can be used with various screw cover caps. The Electro brassed process of electroplating is similar to the 'Galvanised' and 'Zinc Plated' processes but with the addition of a dye. It offers an aesthetically pleasing finish that is resistant to corrosion. The Pozidriv screw is similar in appearance to the classic Phillips cross-head, but in fact is very different. The Pozidriv has four additional points of contact, and does not have the rounded corners that the Phillips screw drive has. The biggest advantage it offers is that, when used with the correct tooling in good condition, it does not cam out, allowing great torque to be applied. The Pozidriv screw can easily be distinguished by a line embossed in the screw head at 45° to the slots for the driver. The screws' countersunk heads are designed to sink flush with substrates to leave a smooth surface finish. They have twin threads to enable an easy start when driving.General Purpose Pozi Screw Countersunk TT Electro Brass 5/8 x 6 Box 200
Forgefix Hex Head Lightning Bolts provide a virtually stress-free fixing for close to edge applications. They are self-threading and allow quick and easy installation of most masonry fixing applications. They can simply be screwed into a pre-drilled hole, without the need for a sleeve or plug. The bolts are through-fixing, eliminating the need for marking and re-positioning. They have a high load capacity due to the thread interlocking into the base material. The bolts have an 'Elementech' coating for superior anti-corrosion, which has been salt spray tested to 1,000 hours. Applications: Widely used for fixing battens, balustrades, handrails, racking and holding down machinery, plus many more installation applications. Suitable for most masonry substrates including concrete and brickwork but also for hollow block or bricks due to the nature of the thread type anchoring along the total length of the fixing.Specifications: Size: M12 x 200mm.Pack quantity: 5.
These Forgefix Set Screws are made from grade 8.8 steel and are zinc plated for increased resistance to corrosion. They are fully threaded and conform to DIN 933 standards.Can be used with many Nut types and washers. APPLICATION:For fastening together numerous types of material or to be fastened in to pre-tapped holes.Widely used in many engineering applications. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminum and stainless steels by their oxide layers.High Tensile Set Screw Zinc Plated M10 x 30 Bag 10
ForgeFix ForgeFast Wood Screws have a universally accepted, Torx® compatible drive. Their recessed ribs provide improved countersinking and reduced surface dust, and their reinforced countersunk necks improve holding power. The screws have a patented drill and drive thread for reduced splitting of the timber, reduced 'jacking' and spinning of joined timber, increased pull-out and a firmer fix. A sharp point provides faster bite and is capable of piercing 0.8mm steel. The screws have an 'Elementech 400' coating providing an anti-corrosive metal finish, which lasts up to 6 times longer than standard zinc coatings. The coating is environmentally friendly and does not contain Cr6+. It is Salt Spray tested to 400 hours. The screws are suitable for interior use. Every box is supplied with a Torx® compatible bit.Size: 4.0 x 25mm.Box quantity: 200.
The DEWALT Compact Series Tape Measure easily fits in your hand, tool box or pocket. The durable, coated steel blade is ideal for use in tough conditions. 3m of extended reach allows easy one person work. It also enables you to measure without blade kinking. Fitted with a finger brake for ultimate blade control, helping you to get the job done quickly and easily.Accuracy: EC Class II.
1 x DEWALT Compact Series Tape Measure 8m/26ft (Width 28mm).
These Forgefix High Tensile Hex Head Bolts are made from 8.8 grade steel. The bolts are part threaded and conform to DIN 933 standards. The hexagonal head has been designed for use with spanners or sockets and offers maximum torque when used with these tools. APPLICATION:For fastening together numerous types of material or to be fastened into pre-tapped holes. Widely used in many engineering applications. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrityHigh Tensile Bolts ZP M10 x 130 Bag 10
The ForgeFix TechFast Masonry CSK Screw is a self-tapping, no stress alternative to plastic plugs. With an easy 2-step installation: drill a hole in substrate and screw in with power tool. These screws have a countersunk head with TORX® compatible recess. Protected by an Elementech coating, fire and corrosion resistant. Salt spray tested to 1,000 hours. Complies with EU Safety, Health and Environmental requirements. Supplied with a T20 Impact Bit.Specification: Size: 4.8 x 57mmPack Quantity: Box of 100
The ForgeFix TechFast Masonry Hex Screw is a self-tapping, no stress alternative to plastic plugs. With an easy 2-step installation: drill a hole in substrate and screw in with a power tool. These screws have an 8mm Hex head with TORX® compatible recess. Protected by an Elementech coating, fire and corrosion resistant. Salt spray tested to 1,000 hours. Complies with EU Safety, Health and Environmental requirements. Supplied with a T27 Impact Bit.Specification: Size: 6.3 x 82mmHead Type: 8mm HexPack Quantity: Box of 100
These Forgefix Multi-Purpose Pozi Screws with countersunk heads are made from A2 stainless steel. They are ideal for use in and with many materials. APPLICATIONIdeal for use in sanitary locations and in marine environments. Stainless Steel does not corrode, rust or stain with water as ordinary steel does, but despite the name it is not fully stain-proof, most notably under low oxygen, high salinity, or poor circulation environments. Stainless steel is used where both the properties of steel and resistance to corrosion are required. The Pozidriv screw is similar in appearance to the classic Phillips cross-head, but in fact is very different. The Pozidriv has four additional points of contact, and does not have the rounded corners that the Phillips screw drive has. The biggest advantage it offers is that, when used with the correct tooling in good condition, it does not cam out, allowing great torque to be applied. The Pozidriv screw can easily be distinguished by a line embossed in the screw head at 45° to the slots for the driver. The screws' countersunk heads are designed to sink flush with substrates to leave a smooth surface finish. They have single threads, designed to offer higher pull out values and quicker insertion.Multi-Purpose Pozi Screw Countersunk ST Stainless Steel 4.0 x 40mm Box 200
Forgefix TechFast Composite Panels to Steel Hex Screws are used to join composite panels to steel frame buildings. They have a specially designed compression control thread to prevent damage and denting of panels. They are fire and corrosion resistant, protected by Elementech corrosion resistant coating, salt spray tested to 1000 hours. Complies with EU Safety, Health and Environmental requirements. They are supplied with 16mm EPDM rubber washers.These Forgefix TechFast Composite Panels to Steel Hex Screws have the following specification: Size: 5.5 x 85mmInsulation Thickness: 37-50mmPack Size: 100Drill Tip: No.5 No.5 drill tip for self-drilling in heavy gauge steel up to 12.5mm.
The ForgeFix Spectre Screws are advanced multipurpose wood screws with double countersunk heads and pozi compatible recess. They have a sawtooth thread design to prevent splitting and reamer to prevent jacking. The screws have a zinc yellow passivated finish for excellent resistance to corrosion. The zinc yellow passivation process of electroplating is similar to the 'galvanised' and 'zinc plated' processes but with the addition of a yellow dye. It offers an aesthetically pleasing finish.Specification: Size: 3.5 x 20mmThread: Fully threadedPack Quantity: Box of 200
This Forgefix fixing band is medium-duty, flexible and strong with pre-punched holes for fixing bolts and screws. It is pre-galvanised and PVC coated to provide resistance against corrosion and heat. It is easy to cut and bend. Supplied in 10m rolls in a dispensing box.Available in red, black or white. APPLICATION:Ideal for fixing, supporting cable, ducting and many more superficial installations.White Plastic Coated Pre-Galvanised Band 12mm x 0,8 x 10m Box 1
The ForgeFix Spectre Screws are advanced multipurpose wood screws with double countersunk heads and pozi compatible recess. They have a sawtooth thread design to prevent splitting and reamer to prevent jacking. The screws have a zinc yellow passivated finish for excellent resistance to corrosion. The zinc yellow passivation process of electroplating is similar to the 'galvanised' and 'zinc plated' processes but with the addition of a yellow dye. It offers an aesthetically pleasing finish.Specification: Size: 4.5 x 60mmThread: 36mm lengthPack Quantity: Box of 100
This Airmaster Tubular Heater is built with a strong steel construction and high quality powder coating, ensures the heat is evenly distributed through the heater body. Fitted with an internal thermostat. Pre-wired. An ideal heating solution where a low cost background heat is required. Comes complete with brackets for wall mounting. Specifications: Input Voltage: 240V (50Hz).Output Rating: 120W.Dimensions:: 610 x 100 x 80mm.IP Rating: IP55.Cable Length: 1m.
