The Masterplug SCT04134W 240 Volt cassette cable reel has a thermal cut out to stop cable overheating, a safety reset button, 4 sockets and 4 metres of 13 amp arctic cable. Manufactured to BS EN 61242.
This Masterplug Metal Clad Light Switch has been designed to perform at 10AX inductive loads. Manufactured in heavy gauge steel and finished with a scratch resistant epoxy powder-coating. Flat profile with rounded edges, colour coded terminals with backed out captive screws for ease of installation. Suitable for everyday use in a garage, shed, commercial and industrial environments. 1 x Masterplug Metal Clad 2-Way 2-Gang Light Switch
Masterplug Weatherproof IP54 enclosure supplied with 4 socket 10 metre extension lead. Ideal for temporary outdoor power solutions, such as for outdoor lighting/decorations.
Masterplug Handy garden extension lead. 15 metre cable complete with storage handle. The highly visible orange cable reduces the chances of tripping over it or cutting it when outdoors.
PlastiKote Glitter Effect Spray can be used as a top coat to create a stunning finish for a creative glitter effect. It is perfect for adding a touch of glamour and sophistication to boxes, frames and other small objects around the home. Suitable for: ceramic, china, glass, metal, papier mache, stone, terracotta, wicker and wood. Coverage: approximately 1m² per tin.Drying time: touch dry in 10 minutes, thoroughly dry in 2 hours.PKT173 Glitter Effect has teh following specifications:Colour: Silver. Pack size: 400ml.
The Facom Protwist® VDE Screwdriver has a gold coloured zinc coating, offering 100% more tip life. Its screwdriver handle material is 12% softer (SHORE rating) to ensure optimum comfort and control for the user. Moulded into the centre of the handle is an ergonomically designed ‘power channel’ that runs the length of the hand. This enables an improved grip and 10% increased torque transfer for more challenging tightening or unfastening requirements. With colour coded ends for ease of identification. Individually tested at 10,000V, these screwdrivers conform to EN 60900 Standards. This 6 Piece Set contains: 4 x Slotted Screwdrivers: 2.5 x 75, 3.5 x 75, 4 x 100, 5.5 x 125mm2 x Phillips Screwdrivers: PH1 x 100, PH2 x 125mm
Ronseal Garden Paint has been designed to add colour to the whole garden, and not just on wood. It can also be used on other garden substrates such as metal (primer may be needed), terracotta, brick and stone. It adds colour, waterproofs and improves water repellency. Its high solid content leads to a high film build and longer lasting protection. It is rainproof in an hour and will resist cracking and peeling. Available in many colours.The Ronseal Garden Paint, in Moroccan Red 2.5 litre, has been designed to add colour to the whole garden, and not just on wood. It can also be used on other garden substrates such as metal (primer may be needed), terracotta, brick and stone.It adds colour, waterproofs and improves water repellency. Its high solid content leads to a high film build and longer lasting protection.It is rainproof in an hour and will resist cracking and peeling. Specifications: Size: 2.5L.Colour: Moroccan Red.
PrimaPlus endfeed fittings are a premium copper fitting which can be used for a variety of installations including water and gas. Manufactured from copper to EN 1254 standard, and fully WRAS approved, you can be sure of a perfect fit each time. PrimaPlus fittings are also kite marked, ensuring that they are to the highest British standard, setting them apart from other manufacturers.
Kite marked approval BS Standard.
WRAS approved for use with drinking water.
Manufactured to EN 1254 standard.
Prima Classic endfeed fittings are great value trade copper fitting which can be used for a variety of installations including water and gas. Manufactured from copper to EN 1254 standard, and fully WRAS approved, you can be sure of a perfect fit each time.
WRAS approved for use with drinking water.
Manufactured to EN 1254 standard.
PrimaPlus Solder Ring fittings are a premium copper fitting with integrated solder. No need to add additional solder when installing, saving time.
PrimaPlus Solder Ring can be used for a variety of installations including water and gas. Manufactured from copper to EN 1254 standard, and fully WRAS approved, you can be sure of a perfect fit each time. PrimaPlus fittings are also kite marked, ensuring that they are to the highest British standard, setting them apart from other manufacturers.
Kite marked approval BS Standard.
WRAS approved for use with drinking water.
Manufactured to EN 1254 standard.
PrimaPlus endfeed fittings are a premium copper fitting which can be used for a variety of installations including water and gas. Manufactured from copper to EN 1254 standard, and fully WRAS approved, you can be sure of a perfect fit each time. PrimaPlus fittings are also kite marked, ensuring that they are to the highest British standard, setting them apart from other manufacturers.
Kite marked approval BS Standard.
WRAS approved for use with drinking water.
Manufactured to EN 1254 standard.
PrimaPlus Solder Ring fittings are a premium copper fitting with integrated solder. No need to add additional solder when installing, saving time.
PrimaPlus Solder Ring can be used for a variety of installations including water and gas. Manufactured from copper to EN 1254 standard, and fully WRAS approved, you can be sure of a perfect fit each time. PrimaPlus fittings are also kite marked, ensuring that they are to the highest British standard, setting them apart from other manufacturers.
Kite marked approval BS Standard.
WRAS approved for use with drinking water.
Manufactured to EN 1254 standard.
Prima Classic endfeed fittings are great value trade copper fitting which can be used for a variety of installations including water and gas. Manufactured from copper to EN 1254 standard, and fully WRAS approved, you can be sure of a perfect fit each time.
WRAS approved for use with drinking water.
Manufactured to EN 1254 standard.
PrimaPlus Solder Ring fittings are a premium copper fitting with integrated solder. No need to add additional solder when installing, saving time.
PrimaPlus Solder Ring can be used for a variety of installations including water and gas. Manufactured from copper to EN 1254 standard, and fully WRAS approved, you can be sure of a perfect fit each time. PrimaPlus fittings are also kite marked, ensuring that they are to the highest British standard, setting them apart from other manufacturers.
Kite marked approval BS Standard.
WRAS approved for use with drinking water.
Manufactured to EN 1254 standard.
PrimaPlus endfeed fittings are a premium copper fitting which can be used for a variety of installations including water and gas. Manufactured from copper to EN 1254 standard, and fully WRAS approved, you can be sure of a perfect fit each time. PrimaPlus fittings are also kite marked, ensuring that they are to the highest British standard, setting them apart from other manufacturers.
Kite marked approval BS Standard.
WRAS approved for use with drinking water.
Manufactured to EN 1254 standard.
Prima Classic endfeed fittings are great value trade copper fitting which can be used for a variety of installations including water and gas. Manufactured from copper to EN 1254 standard, and fully WRAS approved, you can be sure of a perfect fit each time.
WRAS approved for use with drinking water.
Manufactured to EN 1254 standard.
Prima Classic endfeed fittings are great value trade copper fitting which can be used for a variety of installations including water and gas. Manufactured from copper to EN 1254 standard, and fully WRAS approved, you can be sure of a perfect fit each time.
WRAS approved for use with drinking water.
Manufactured to EN 1254 standard.
PrimaPlus Solder Ring fittings are a premium copper fitting with integrated solder. No need to add additional solder when installing, saving time.
PrimaPlus Solder Ring can be used for a variety of installations including water and gas. Manufactured from copper to EN 1254 standard, and fully WRAS approved, you can be sure of a perfect fit each time. PrimaPlus fittings are also kite marked, ensuring that they are to the highest British standard, setting them apart from other manufacturers.
Kite marked approval BS Standard.
WRAS approved for use with drinking water.
Manufactured to EN 1254 standard.
PrimaPlus endfeed fittings are a premium copper fitting which can be used for a variety of installations including water and gas. Manufactured from copper to EN 1254 standard, and fully WRAS approved, you can be sure of a perfect fit each time. PrimaPlus fittings are also kite marked, ensuring that they are to the highest British standard, setting them apart from other manufacturers.
Kite marked approval BS Standard.
WRAS approved for use with drinking water.
Manufactured to EN 1254 standard.
PrimaPlus endfeed fittings are a premium copper fitting which can be used for a variety of installations including water and gas. Manufactured from copper to EN 1254 standard, and fully WRAS approved, you can be sure of a perfect fit each time. PrimaPlus fittings are also kite marked, ensuring that they are to the highest British standard, setting them apart from other manufacturers.
Kite marked approval BS Standard.
WRAS approved for use with drinking water.
Manufactured to EN 1254 standard.
These Forgefix Flat Repair Washers have a large 40mm outside diameter. They are bright Zinc Plated for increased corrosion resistance. Washers provide a smooth surface for the nut or bolt to bear on, making it less likely to loosen as a result of an uneven fastening surface. The main purpose of a washer is to distribute the load under a bolt head or the nut face. APPLICATION:On all manner of bolting applications. Can be used with all types of bolts and nuts. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminum and stainless steels by their oxide layers.Flat Repair Washers ZP M10 x 40mm Bag 10
Prima Classic endfeed fittings are great value trade copper fitting which can be used for a variety of installations including water and gas. Manufactured from copper to EN 1254 standard, and fully WRAS approved, you can be sure of a perfect fit each time.
WRAS approved for use with drinking water.
Manufactured to EN 1254 standard.
Prima Classic endfeed fittings are great value trade copper fitting which can be used for a variety of installations including water and gas. Manufactured from copper to EN 1254 standard, and fully WRAS approved, you can be sure of a perfect fit each time.
WRAS approved for use with drinking water.
Manufactured to EN 1254 standard.
PrimaPlus endfeed fittings are a premium copper fitting which can be used for a variety of installations including water and gas. Manufactured from copper to EN 1254 standard, and fully WRAS approved, you can be sure of a perfect fit each time. PrimaPlus fittings are also kite marked, ensuring that they are to the highest British standard, setting them apart from other manufacturers.
Kite marked approval BS Standard.
WRAS approved for use with drinking water.
Manufactured to EN 1254 standard.
Dormer Metric A002 TiN Jobber Drill Bits have a TiN tip coating for increased tool life and performance. It has a self-centring split point for superb hole quality and positional accuracy. It will drill steel, stainless, cast iron, ceramics, plastics and many other materials with ease. Made to DIN 338RN/BS328/ISO 235 standards. PLEASE NOTE ALL sizes under 2.0mm are NOT TiN Coated.Tip diameter: 10.50mm.Working length: 87mm.Overall length: 133mm.
The Bosch PRO SDS plus-5X Hammer Drill Bits are made from an embedded cross of high-quality tungsten carbide, the 4-cutter head offers convenience to professionals who need to drill accurate holes in reinforced concrete. Its 4 flutes channel dust away from the impact point, ensuring effective and long-lasting performance. Reinforced concrete is a common material in infrastructure, commercial and domestic construction, and workers such as electricians, plumbers or HVAC installers often need to drill into it. PRO SDS plus-5X Hammer Drill Bits are designed for this tough task.
1 x Bosch PRO SDS plus-5X Hammer Drill Bit 6.0 x 200 x 260mm
The Bosch D-TECT 200 C Professional Wall Scanner detects all common objects and illustrates them clearly, while making documentation easy. Equipped with Bosch Radar Technology and an improved user interface. Multiple views allow for conveniently choosing the best option for different applications, such as Spot View, making detection in hard-to-reach locations especially easy. To provide solid evidence, the wallscanner´s innovative screenshot feature enables quick documentation. The D-TECT 200 C Professional supports both indoor and outdoor jobs, prevents damage during drilling, and measures concrete coverage. Supplied with: 1 x Battery Adaptor, 1 x USB-C Cable, 1 x Hand Strap, 4 x AA 1.5 V LR6 Batteries and 1 x Pouch. Specifications: Max. Detection Depth: 200mm.Max. Dry Concrete Detection Depth: 200mm.Max. Early Age Concrete Detection Depth: 60mm.Max. Detection Depth in Other Wall Types: 80mm.Max. Wooden Substructures Detection Depth: 38mm.Accuracy: ± 5mm.Power Supply: 12V Li-ion or 4 x AA Batteries.Dust and Splash Protection:IP5XWeight: 0.7kg.
The CN2MLSTiE fan heaters are designed with a maximum surface temperature of 43�C, complying with NHS Estates Health Guidance Notes, to minimise the risk of burn injuries. Ideal for nurseries, hospitals and retirement homes, these fan heaters provide a high level of safety and controllability.
2kW rating
7-day timer, 6 heating periods per day
Cell battery to backup real time clock
Incorporates EC motor for improved energy efficiency
Quiet operation
Copy day function
Digital controls with easy-to-read display
4 large control buttons with tactile feedback
4 Operating modes: Programme, Boost, Setback & Manual
15-minute Boost feature
Comfort heat setting between 15�C to 35�C
Setback temperatures can be used for frost protection or maintaining a minimum room temperature between 4�C to 15�C
Automatic safety cut-out
Can set temperatures in degrees Celsius or Fahrenheit
Maintains temperature within 0.7 degrees
Electronic child lock
Mesh grille to prevent objects from being dropped into the heater
LED light indicator
Finished in white
Open Window Detection
Features open window detection which recognises a sudden temperature drop when a window is opened and turns the heating off to save energy. Once the window is closed, the temperature change triggers the heating to resume its normal operation.
Safety Monitoring
In the unlikely event of a fault, the safety monitoring will help prevent high surface temperatures and the light on the heater will flash indicating the nature of the fault.
Intelligent Fan Control
The fan speed of the heater automatically adjusts relative to the room�s temperature and heat output in order to achieve a warm control. This prevents the heater from blowing cold air.
The Bosch S 922 BF Flexible for Metal Reciprocating Saw Blade is optimised for fast cuts in metal pipes and profiles with a small diameter. Its tooth pitch (1.8mm) is specially designed for working at high speeds. BIM blade engineered for long lifetime when cutting regular-strength steel. Fits all S-shank reciprocating saws.Specifications:Overall Length: 150mmMax. Cutting Capacity: 100mmTPI: 14
Pack of 5 Bosch S 922 BF Flexible for Metal Reciprocating Saw Blades 150mm 14 TPI.
The Bosch 43 Piece Extra Hard Screwdriver Bit Set is all for all standard screwdriving tasks. The bits are color-coded so you can more easily find the one you need. Supplied in a sturdy plastic Pick and Click box, you can use it to keep your bits organized and protected. Contains:4 x 25mm Phillips Bits: PH1, PH2(x2), PH34 x 25mm Pozi Bits: PZ1, PZ2(x2), PZ38 x 25mm TORX Bits: T10, T15, T20(x2), T25, T27, T30, T408 x 25mm TORX Security Bits: T10, T15, T20(x2), T25, T27, T30, T404 x 25mm Hex Bits: 3, 4, 5, 6mm4 x 25mm Slotted Bits: 3, 4, 5, 6mm1 x 65mm Phillips Bit: PH21 x 65mm Pozi Bit: PZ23 x 65mm TORX: T15, T20, T251 x 65mm Slotted Bit: 6mm4 x Nut Setters: 6, 8, 10, 13mm1 x Bit Holder
The Bosch Basic for Metal Jigsaw Blade for straight cuts in metal. The fully hardened, high-grade HSS blade material is appropriate for cutting non-perforated metal sheets. Its milled, wavy-set teeth are ideal for cuts without special requirements. Fits all T-shank jigsaws.
Pack of 5 Bosch T 118 A Basic for Metal Jigsaw Blades 92mmThese blades have a very fine progressive tooth pitch (1.1-1.5mm) for cuts in very thin solid sheet metals with 1-3mm thickness.
The Bosch PRO SDS plus-5X Hammer Drill Bits are made from an embedded cross of high-quality tungsten carbide, the 4-cutter head offers convenience to professionals who need to drill accurate holes in reinforced concrete. Its 4 flutes channel dust away from the impact point, ensuring effective and long-lasting performance. Reinforced concrete is a common material in infrastructure, commercial and domestic construction, and workers such as electricians, plumbers or HVAC installers often need to drill into it. PRO SDS plus-5X Hammer Drill Bits are designed for this tough task.
1 x Bosch PRO SDS plus-5X Hammer Drill Bit 6.0 x 150 x 210mm
The 15 Piece Bosch PRO Router Bit Mixed Set for cabinet makers, joiners, carpenters, and all professionals working with routers who want to get precise, clean cuts in hardwood and wood composites with ease – time and again. Supplied in a transparent case. Contains: 1 x Flush Trim Bit, 1 x Flush Pattern Bit, 1 x Dovetail Bit, 1 x Chamfer Bit, 1 x Chamfer Bit, 1 x V-groove Bit, 1 x Slotting Cutter, 1 x Rebating Bit, 1 x Roman Ogee Bit, 1 x Cove Bit, 1 x Rounding Over Bit, 1 x Rounding Over Bit, 1 x Straight Bit 2 Cutter, 1 x Straight Bit 3 Cutter, 1 x Straight Bit 3 Cutter.
The Bosch S 644 D Top for Wood Reciprocating Saw Blade delivers clean curved and plunge cuts in wood. Sharp-ground teeth enable tear-free cuts. The fully tapered body provides easy access to hard-to-reach areas and enables curved cutting. Fits all S-shank reciprocating saws.Specifications:Overall Length: 150mmMax. Cutting Capacity: 100mmTPI: 6
Pack of 5 Bosch S 644 D Top for Wood Reciprocating Saw Blades 150mm 6 TPI
