Connectors for use with grease guns.Conical connector for use with all style of grease nipples, by inserting point into ball check.Ideal for damaged nipples.1/8in BSP Thread Connection.
ForgeFix Concrete Frame Screws are suitable for most masonry substrates including concrete and brickwork. Widely used for batten, window and door frame fixing. These specially designed self-tapping screws are virtually stress free, allowing close to edge applications. Its torx compatible head allows for increased torque control. With a high load capacity with interlocking thread into base material. Through fixing, eliminates the need for marking and re-positioning. Finish: Zinc Yellow Passivated. Box of 100 ForgeFix Concrete Frame Screw ZYP 7.5 x 132mm.
ForgeFix ForgeFast Wood Screws have a universally accepted, Torx® compatible drive. Their recessed ribs provide improved countersinking and reduced surface dust, and their reinforced countersunk necks improve holding power. The screws have a patented drill and drive thread for reduced splitting of the timber, reduced 'jacking' and spinning of joined timber, increased pull-out and a firmer fix. A sharp point provides faster bite and is capable of piercing 0.8mm steel. The screws have an 'Elementech 400' coating providing an anti-corrosive metal finish, which lasts up to 6 times longer than standard zinc coatings. The coating is environmentally friendly and does not contain Cr6+. It is Salt Spray tested to 400 hours. The screws are suitable for interior use. Every box is supplied with a Torx® compatible bit.Size: 5.0 x 40mm.Box quantity: 200.
These Forgefix Phillips, Single Coarse Thread (SCT) Drywall Screws have a black phosphate finish for increased durability. Their Bugle Head allows the screw to sink effortlessly into the dry lining without the need for countersinking, which in turn minimises the damage to the surface. They are supplied collated, with 50 screws per strip and 1,000 screws per box. APPLICATION:Designed for fitting dry lining to studding. Phosphate coatings are made up of thin crystalline layers of phosphate compounds that adhere to the surface of the fixing or fastener. The phosphate crystals are porous and can be formed from zinc, manganese, or iron phosphate solutions. Phosphate coatings offer good corrosion resistance and have an excellent ability to absorb supplementary coatings which improves appearance, corrosion resistance and resistance to abrasion. The Phillips screw has four simple tapered slots. It is designed so that a Phillips tip screwdriver can turn a screw with increasing torque. When the torque gets to be too strong for the tip then the screwdriver tip winds itself out of the screw thus preventing over-tightening and or damage to the screw head. Coarse thread screws (mainly drywall screws) have an extremely sharp point and are designed to penetrate plasterboard skin. The coarse thread eases in to the board then the timber baton holding the board firm.Drywall Collated Screw Phillips Bugle Head SCT 3.9 x 55mm Box 1000
These Forgefix Multi-Purpose Pozi Screws with countersunk heads are made from A2 stainless steel. They are ideal for use in and with many materials. APPLICATIONIdeal for use in sanitary locations and in marine environments. Stainless Steel does not corrode, rust or stain with water as ordinary steel does, but despite the name it is not fully stain-proof, most notably under low oxygen, high salinity, or poor circulation environments. Stainless steel is used where both the properties of steel and resistance to corrosion are required. The Pozidriv screw is similar in appearance to the classic Phillips cross-head, but in fact is very different. The Pozidriv has four additional points of contact, and does not have the rounded corners that the Phillips screw drive has. The biggest advantage it offers is that, when used with the correct tooling in good condition, it does not cam out, allowing great torque to be applied. The Pozidriv screw can easily be distinguished by a line embossed in the screw head at 45° to the slots for the driver. The screws' countersunk heads are designed to sink flush with substrates to leave a smooth surface finish. They have single threads, designed to offer higher pull out values and quicker insertion.Multi-Purpose Pozi Screw Countersunk ST Stainless Steel 5.0 x 40mm Box 200
These ForgeFix traditional slotted, single thread Wood Screws have countersunk heads and can be used in many internal and external applications. They have a solid brass construction to avoid corrosion. APPLICATION:Used for both decorative and in applications where the screw may come in to contact with the elements avoiding corrosion.Can be used with all manner of wall plugs. Slotted screw driver required. With Slotted screwdrivers it is important to ensure that the tip matches the width of the screw slot, otherwise you run the risk of damaging the screw head. Slotted screwdrivers are available with either Flared or Parallel tips. For the majority of uses the Flared tip is ideal but if the screw needs to be driven below the material surface a Parallel tip screwdriver should be used. Countersunk heads are designed to sink flush with substrates to leave a smooth surface finish. The single threads have been designed to offer higher pull out values and quicker insertion.Wood Screw Slotted Countersunk Solid Brass 1 x 6 Box 200
The ForgeFix TechFast Masonry CSK Screw is a self-tapping, no stress alternative to plastic plugs. With an easy 2-step installation: drill a hole in substrate and screw in with power tool. These screws have a countersunk head with TORX® compatible recess. Protected by an Elementech coating, fire and corrosion resistant. Salt spray tested to 1,000 hours. Complies with EU Safety, Health and Environmental requirements. Supplied with a T20 Impact Bit.Specification: Size: 6.3 x 101mmPack Quantity: Box of 100
ForgeFix ForgeFast Wood Screws have a universally accepted, Torx® compatible drive. Their recessed ribs provide improved countersinking and reduced surface dust, and their reinforced countersunk necks improve holding power. The screws have a patented drill and drive thread for reduced splitting of the timber, reduced 'jacking' and spinning of joined timber, increased pull-out and a firmer fix. A sharp point provides faster bite and is capable of piercing 0.8mm steel. The screws have an 'Elementech 400' coating providing an anti-corrosive metal finish, which lasts up to 6 times longer than standard zinc coatings. The coating is environmentally friendly and does not contain Cr6+. It is Salt Spray tested to 400 hours. The screws are suitable for interior use. Every box is supplied with a Torx® compatible bit.Size: 4.5 x 20mm.Box quantity: 200.
The Makita DJV181 Top Grip Jigsaw has a brushless motor with a soft no load function that automatically reduces the motor speed during idling to suppress the vibration of the machine body. Speed can be adjusted via the variable speed control dial. The jigsaw is fitted with a rigid aluminium base, that bevels from 0 to 45°, left and right. With a change lever for 3 orbital (pendulum) settings and straight cutting. Blade changing is simple and easy, thanks to the tool-less blade change feature. Other features include an improved dust extraction hose joint, blower function to clear wood dust from cutting line and a twin LED job light. Comes as a Bare Unit, No Battery or Charger. Specification Strokes at No Load: 800-3,500/min.Stroke Length: 26mmBevel Capacity: 45°Capacity: Steel: 10mm, Wood: 135mm, Aluminium: 20mmWeight: 2.5kg
These ForgeFix Don Quichotte Heavy Gauge Masonry Nails have the following specification: Size: 3.5 x 50mmFinish: Zinc GalvanisedPack Quantity: Box of 100
These Forgefix Through Bolts (also known as Wedge Anchors or Toothless Anchors) have a Zinc Yellow Passivated finish for durability and corrosion resistance. They are through-fixing, and extremely economical and quick to install. APPLICATIONIdeal for fixing brackets, cladding, restraints, racking, fabricated stairwells and industrial doors.Ensure the correct socket drive or spanner is used to ensure accurate installation. The Zinc Yellow Passivation process of electroplating is similar to the Galvanised and Zinc Plated processes but with the addition of a yellow dye. It provides a coating that is aesthetically pleasing, and which offers excellent resistance to corrosion.Through Bolt Zinc Yellow Passivated M12 x 80 Bag 5
Forgefix TechFast Timber to Steel CSK/Wing Screws are used to join timber to steel frame buildings. The screws are fitted with breakaway wings that create a clearance hole to protect thread from engaging timber when drilling through. Breakaway wings will ream a hole, then break-off when they contact the metal surface to be drilled. The thread will then engage with metal. They have a TORX® compatible insert for a higher transmission of power. With improved countersinking from recessed ribs. Fire and corrosion resistant. Complies with EU Safety, Health and Environmental requirements.These Forgefix TechFast Timber to Steel CSK/Wing Screws have the following specification: Size: 5.5 x 120mmClamping Thickness: 91mmEffective Thread Length: 92mmPack Size: 50Drill Tip: No.5 No.5 drill tip for self-drilling heavy gauge steel up to 12.5mm
These ForgeFix traditional slotted, single thread Wood Screws have countersunk heads and can be used in many internal and external applications. They have a solid brass construction to avoid corrosion. APPLICATION:Used for both decorative and in applications where the screw may come in to contact with the elements avoiding corrosion.Can be used with all manner of wall plugs. Slotted screw driver required. With Slotted screwdrivers it is important to ensure that the tip matches the width of the screw slot, otherwise you run the risk of damaging the screw head. Slotted screwdrivers are available with either Flared or Parallel tips. For the majority of uses the Flared tip is ideal but if the screw needs to be driven below the material surface a Parallel tip screwdriver should be used. Countersunk heads are designed to sink flush with substrates to leave a smooth surface finish. The single threads have been designed to offer higher pull out values and quicker insertion.Wood Screw Slotted Countersunk Solid Brass 3/4 x 4 Box 200
Makita DUC254Z BL LXT Chainsaw comes with a high chain speed for pruning and carving. Equipped with a maintenance-free brushless motor. A torque boost mode enables the cutting of thick branches by temporarily boosting current limiter. Its lightweight and design with top handle makes it easy to use. The battery protection system automatically shuts off power when the battery level is low. Only approved for commercial users with special training. Comes as a Bare Unit, NO battery or charger supplied. Specifications: Bar Length: 25cm.Chain Speed: 24m/s.Chain: Gauge: 0.043in.Chain Pitch: 3/8in.Chain Oil Tank: 0.14 litre.
Forgefix TechFast Timber to Steel CSK/Wing Screws are used to join timber to steel frame buildings. The screws are fitted with breakaway wings that create a clearance hole to protect thread from engaging timber when drilling through. Breakaway wings will ream a hole, then break-off when they contact the metal surface to be drilled. The thread will then engage with metal. They have a TORX® compatible insert for a higher transmission of power. With improved countersinking from recessed ribs. Fire and corrosion resistant. Complies with EU Safety, Health and Environmental requirements.These Forgefix TechFast Timber to Steel CSK/Wing Screws have the following specification: Size: 5.5 x 100mmClamping Thickness: 80mmEffective Thread Length: 79mmPack Size: 100Drill Tip: No.3 No.3 drill tip for self-drilling heavy gauge steel up to 5mm.
These Forgefix Pozi Carcass Screws have an extremely coarse single thread. The have a black phosphate coating for increased durability and a self drill point for easy installation. APPLICATION:Designed specifically for chipboard and MDF (medium density fibre) board and carcass assembly. Phosphate coatings are made up of thin crystalline layers of phosphate compounds that adhere to the surface of the fixing or fastener. The phosphate crystals are porous and can be formed from zinc, manganese, or iron phosphate solutions. Phosphate coatings offer good corrosion resistance and have an excellent ability to absorb supplementary coatings which improves appearance, corrosion resistance and resistance to abrasion. The Pozidriv screw is similar in appearance to the classic Phillips cross-head, but in fact is very different. The Pozidriv has four additional points of contact, and does not have the rounded corners that the Phillips screw drive has. The biggest advantage it offers is that, when used with the correct tooling in good condition, it does not cam out, allowing great torque to be applied. The Pozidriv screw can easily be distinguished by a line embossed in the screw head at 45° to the slots for the driver. Coarse thread screws have an extremely sharp point and are designed to penetrate plasterboard skin. The coarse thread eases in to the board then the timber baton holding the board firm.Carcass Screw Pozi SCT Black Phosphate 4.2 x 45mm Box 200
Lufkin diameter steel tape is graduated in diameter inches on one side permitting direct reading of diameters. The zero falls in same place on each side of blade and has a manual operation, yellow Clad blade. Specification Blade Length: 6ft (72in)Blade Width: 1/4in
A versatile measuring instrument with matt black die cast stock, brass locking screw and stainless steel blade with markings clearly etched on both sides, fitted with separate scriber.Also fitted with a steel blade, centre head and protractor set.
A Taper Wedge Masonry Drill Bit for use with Faithfull and other makes of dry diamond core bit systems, requiring the use of an 'A' taper pilot drill bit. Length: 200mm.
The Faithfull FAIDCKIT11 11 Piece Diamond Core Drill Kit is suitable for brick and concrete blocks etc. They are ideal for plumbing, electrical, engineering installation and general building tasks. All cores are 1⁄2 inch. BSP threaded with 8mm turbo segments. Set contains:5 x Diamond Cores with 8mm Turbo Segments, Sizes: 38mm, 52mm, 65mm, 117mm, 127mm.1 x SDS Plus Extension Adaptor 10mm x 115mm.1 x HEX Extension Adaptor 12mm x 88 mm.1 x SDS Plus Extension Adaptor 10mm x 240mm.1 x HEX Extension Adaptor 12mm x 240mm.1 x A-Taper Pilot Drill 10 x 200mm.1 x Extractor Drift Key. ROTARY USE ONLY – Must not be used on Percussion/Hammer mode. DO NOT USE DIAMOND CORES LARGER THAN 78mm IN DIAMETER WITH SDS PLUS DRILLS AS THIS MAY RESULT IN DAMAGE TO THE POWER TOOL OR SDS ADAPTOR. Diamond Cores give the best results when used with a purpose built core drilling machine
The Stanley FatMax® Tamper-proof TORX tip screwdrivers have a chrome vanadium steel bar which allows high torque and reduces the risk of tip breakage, and the handle is moulded directly to the shaft for a virtually unbreakable bond which gives long life and durability. The soft grip handle gives a perfect combination of great grip and reduced fatigue in use and is colour coded for easy identification of the right tip type for the application. The smooth domed end offers fast, comfortable spinning action and the large diameter handle offers higher torque when driving wood screws.Type - Tamper-proof TORXTip Size TTX10Blade Length 75mm (3in)
The Faithfull FAIOCP50205L has an efficient lever action pump for use with steel barrels. This heavy-duty pump features a diecast aluminium head and bung nut, with a zinc plated 38mm curved discharge spout and telescopic suction tube that adjusts to suit the barrel size. The Faithfull FAIOCP50205L is for use with petroleum based liquids only with the following specifications: Delivers: 300ml (10 fl oz) per stroke. Fits: 50 to 205 Litre (15 - 55 gal) drums.
The screwdrivers in this Stanley Tools 6 piece precision set have a soft cushion grip for comfort. They are supplied in a handy plastic storage case. The set contains the following: 2 x Phillips: PH0 and PH1.4 x Slotted: 1.4, 2.0, 2.4 and 3.0mm.
This Stanley Tools Ratchet Handle has 72 teeth and works in 5° increments. A quick-release button on the head enables quick socket change. Its ergonomic bi-material handle provides increased comfort and control. The head has a fully polished chrome plated finish for increased durability and rust resistance. A low profile switch lever prevents accidental switching and allows easy one-hand operation.
The Stanley DYNAGRIP™ Wood Chisel is fitted with a steel striking cap handle which can be used with a steel hammer. With a longer, soft grip handle for improved grip and control, forged high carbon steel blades for reassurance of strength and durability. The pre-sharpened blade is ready for immediate use.1 x Stanley DynaGrip™ Bevel Edge Chisel With Strike Cap 25mm (1in)
The Stanley PowerLock® Classic Pocket Tape has a Mylar® coated steel blade that is up to 10 times more resistant to abrasion than normal lacquered blades. Tipped by a super-strong 3 rivet, automatically adjustable, tru-zero end hook. Supplied in a high-impact, chrome plated ABS plastic case with a smooth, quick-grab autolocking mechanism and a conventional steel belt clip. Available with metric only or metric and imperial graduations.This Stanley PowerLock® Classic Pocket Tape has metric graduations only. Blade Length: 5mBlade Width: 19mmAccuracy: EC Class II
The Stanley FatMax® Thru tang bevel edge chisels have an ergonomic handle design incorporating a shatterproof polymer handle. The ergonomic soft grip longer handle is useful for maximum control, feels good in the hand and is comfortable in all applications. The friction welded bolster also gives strength and durability. The steel striking cap can be struck with a steel hammer for increased cutting force and the body resists most solvents. The ISO Standard Blade is made from high quality ball bearing grade steel EN31 and is fully ground and finished for ultimate sharpness and the full length blade guard provides added safety. This FatMax chisel range has a superior design - 50% stronger handle (than the old Dyna Grip Pro Chisel on side impact test) for extra reassurance and durability. The quality chrome alloy (ball bearing grade) steel provides superior edge retentionThe Stanley STA 0-16-261 FatMax® Thru Tang Chisel is 25mm (1 inch) in width and 155mm in length
The Stanley DYNAGRIP™ Wood Chisel is fitted with a steel striking cap handle which can be used with a steel hammer. With a longer, soft grip handle for improved grip and control, forged high carbon steel blades for reassurance of strength and durability. The pre-sharpened blade is ready for immediate use.1 x Stanley DynaGrip™ Bevel Edge Chisel With Strike Cap 18mm (3/4in)
The Stanley FatMax® Closed Case Long Tape has a 10mm wide stainless steel blade that resists rusting and has metric only graduations. Its closed case design helps to protect the blade and internal workings and has a non-slip rubber grip. The 3:1 gear ratio provides 3x faster rewind and a steel roller cage protects the case from being cut by the blade during retraction. There is also a corrosion resistant Tru-zero folding end hook for accurate measurements.The Stanley FatMax® Closed Case Steel Long Tape has metric graduations only. Blade Length: 30mBlade Width: 10mmAccuracy: EC Class II
The STANLEY FATMAX® XTREME™ Magnetic Box Beam Level is equipped with stronger rare earth magnets than previous models. Designed to provide durability and accuracy, providing you with the performance you need for every job. The patented continuous edge enables the ability to draw or scribe uninterrupted lines along the full length of the level. Whilst its fine milled primary edge provides 0.5mm/m accuracy, with a secondary edge accuracy of 0.8mm/m.Fully secured vial technology is designed to protect the vials against drop damage, while the 90% larger plumb vial provides an easier-to-see bubble for better visibility. The shock absorbing end caps are rubber moulded to protect the level from drop damage and feature raised anti-slip surface protectors to help protect against slipping and surface marking. Additionally, the end caps can be removed, making 90-degree markings and corner lines easier and more accurate. Strategically placed finger grab rails and wrap around handed grips are also incorporated for easier one handed use and better ergonomic design.
1 x STANLEY® FATMAX® XTREME™ Magnetic Box Beam Level 60cm
High leverage compound cutting action snips made from forged alloy steel. Chrome Molybdenum construction with serrated cutting edge to prevent slippage when cutting. The one handed automatic latch releases with the squeeze of the handles which are bi-material for extra comfort and grip. These snips cut up to 18 gauge steel and are suitable for cutting aluminium, sheet uPVC, wire mesh, leather, copper and plastic. 1 x Stanley Red Aviation Snip Left Cut 250mm (10in)
The DEWALT SDS-Plus EXTREME 2®Drill Bit is made from superior carbide grade for long life and greater durability. The hardened body adds further strength and helps to reduce breakage. Its optimised flute design provides efficient debris removal whilst the tip design ensures better bit penetration.This DEWALT SDS-Plus Extreme 2 Drill Bit has the following dimensions: Diameter: 6mmWorking Length: 50mmOverall Length: 110mmPack Quantity: 1
The Stanley Curved Jaw Mole Grips are ideal for gripping pipes or hexagon nuts. The forged and machined jaws offer maximum durability and there is also a built-in wire cutter. The body is chrome plated to resist corrosion and the knurled screw at the base of the handle adjusts the clamping pressure and the non-pinching pull jaw release lever improves safety and ease of opening.These Stanley Tools Curved Jaw Locking Pliers have the following specification: Length: 229mm (9in).
