This Faithfull Screwdriver Bit Set is a useful addition to any toolkit. The 30 screwdriver bits are made from S2 steel and include the most popular types and sizes. Also included is a square drive adaptor and a quick-release holder. Contents:7 x 25mm Pozi Bits: PZ0, PZ1, PZ2 (x4), PZ34 x 25mm Phillips Bits: PH0, PH1, PH2, PH35 x 25mm Slotted Bits: 3, 4, 5, 6, 7mm7 x 25mm Hex Bits: 2, 3, 4, 5, 6, 7, 8mm7 x 25mm TORX (Star) Security Bits: TTX10, TTX15, TTX20, TTX25, TTX27, TTX30, TTX401 x 1/4in Hex to 1/4in Square Drive Adaptor1 x 1/4in Quick-Release Magnetic Ejector Bit Holder Supplied in a sturdy plastic case.
The Irwin Metric HSS Cobalt Drill Bits are perfect for drilling stainless steel and other high alloy steels. They have 5% cobalt for higher heat and abrasion resistance and a heavy-duty web construction for strength and durability. The 135° split point begins drilling immediately, minimising bit walk and they are manufactured to DIN 338 Standards.The Irwin HSS Cobalt Drill Bits are supplied in a pack of 5. Specification: Diameter: 8.5mm.Total length: 117mm.Working length: 75mm.
Replacement Triangular Sanding Sheets for use with the Vitrex Long Reach Sander LRS700. Must be used in conjunction with the Vitrex LRSDH001 Delta Sander Head (Stock Code: VITLRSDH01). Easy to replace, Hook & Loop attachment.1 x Pack of 10 Vitrex Triangular Sanding Sheets, 180 Grit
Faithfull Standard masonry bits are for use in chucks up to 13mm capacity and are suitable for general purpose drilling including bricks, blocks and cement render when used in an impact or percussion drill. A roll formed and treated body with a heavy-duty Tungsten Carbide tip and fast spiral for quick waste removal.Manufactured to DIN 8039. Zinc plated finish and packed individually. Size.10 mm x 200 mm.
Ronseal Garden Paint has been designed to add colour to the whole garden, and not just on wood. It can also be used on other garden substrates such as metal (Primer may be needed), terracotta, brick and stone. Garden paint adds colour, waterproofs, and improves water repellency. Its high solid content leads to a high film build and longer lasting protection. It is rainproof in 1 hour and will resist cracking and peeling. Available in many colours.1 x Ronseal Garden Paint Sage 250ml
The Scan Fall arrest harness is a commonly used full body harness and comes with metal D-Ring attachment and leg straps. It is suitable for most work at height applications in the construction industry (scaffolders, steel erectors etc) and has fully adjustable leg, shoulder & chest straps. The rear dorsal plate slides upwards to keep the user upright after a fall and it has a robust metal front attachment point with polyester webbing and front and rear attachment. Conforms to EN 361 and comes in a storage bag. Over 7,000 falls from height in the workplace were reported to the UK health and Safety Executive during 2006-07, 24 of these were fatal. Falls from height are the most common cause of fatal injury and the second most common cause of major injuries, accounting for around 15% of all such injuries in the workplace.
The Union 2200S StrongBOLT 5 lever mortice sashlock is ideal for timber doors hinged on the left or right and they are suitable for doors up to 54mm thick. The deadbolt is locked or unlocked by the key from either side with the 20mm deadbolt for secure positive deadlocking and additional resistance against attack. 2200S features an anti-pick, anti-saw and anti-drill security, chamfered bolt design that increases the performance of the lock under side load testing. The chamfer of the bolt also makes drilling attack more difficult. Supplied with covered escutcheon to match forend. The StrongBOLT series of locks are recommended by insurance companies, kitemarked to BS3621: 2007 (British Standard) and have been approved by the police Secured by Design initiative. They are also covered by a 10 Year guarantee. The radius inner forend for ease of installation, can be installed into many UK mortices without the need for additional carpentry or spoiling the edge of the door. The anti-pick and keyhole protection prevents forced entry by picking and the lock has hardened steel pins that provide resistance to attack from sawing. Case Steel, red powder coat.Forend Stainless steel or brass finish.Striking Plate Finished to match forend.Face Plate supplied with square face plate which covers a radius inner forend.Deadbolt With hardened steel rollers.Latch Bolt Reversible.Follower 8mm square.Rebate Kit 2200REB 13mm or 26mm.Keying Groups Supplied to differ or to pass/keyed alike.Supplied with 2 steel nickel plated keys.Key Blank Number KB430.Finish: Polished Brass Case Size: 81mm x 109.6mm (3 in) Backset: 57mm This is the measurement from the edge of the door to the centre of the keyhole. Centre: 57mm This is the measurement from the centre of the follower, which operates the handles, to the centre of the keyhole. In the UK this is commonly 57mm.Boxed
The PlastiKote Twist & Spray Premium Satin Paint gives an enhanced, consistent coverage. The easy spray technology provides added control to make spray painting easier, faster and cleaner. Each coat is ultra-smooth, providing flawless coverage that dries quickly to a tough, durable finish. The paint can be recoated at anytime for simple, faster project completion. The can's large, comfortable finger pad requires 33% less finger pressure than other spray paint cans, and the twist and lock mechanism means there is no separate top to remove or replace after use. Its cap and button design shields the finger from paint for a cleaner spray painting process. Suitable for: wood, metal, plastic, stone, wicker and crafts. Drying Time: touch dry in 30-50 minutesCoverage: 2.23m² per canThis PlastiKote Twist & Spray has the following specifications: Finish: SatinColour: PistachioSize: 400ml
Replacement Blade for the ROU66805 Gorilla Fast Cut Folding Pruning Saw. The blade has impulse-hardened, triple ground teeth with a low friction PTFE coating for exceptional cutting performance. Specification: Blade Length: 180mmTeeth: 7 TPI
ForgeFix ForgeFast Wood Screws have a universally accepted, Torx® compatible drive. Their recessed ribs provide improved countersinking and reduced surface dust, and their reinforced countersunk necks improve holding power. The screws have a patented drill and drive thread for reduced splitting of the timber, reduced 'jacking' and spinning of joined timber, increased pull-out and a firmer fix. A sharp point provides faster bite and is capable of piercing 0.8mm steel. The screws have an 'Elementech 400' coating providing an anti-corrosive metal finish, which lasts up to 6 times longer than standard zinc coatings. The coating is environmentally friendly and does not contain Cr6+. It is Salt Spray tested to 400 hours. The screws are suitable for interior use. Every tub is supplied with a Torx® compatible bit.Size: 5.0 x 100mm.Pack quantity: 300.
These Forgefix Oval Lost Head Nails are versatile and ideal for use in general joinery. The nail head virtually disappears when punched below the timber surface, making them ideal for decorative type applications. The shape of the nail helps to prevent splitting of hard or brittle timber. The nails have a 'Bright' finish, which is simply the basic raw mild steel material, without any coating or finish. APPLICATION:General cross section of joinery applications. By aligning the nail with the wood grain, splitting is reduced.Oval Lost Head Nail Bright Finish 30mm Bag Weight 250g
These Forgefix Double Cliplock Pipe Clips are made from heat-resistant polypropylene, designed to withstand the temperature changes in central heating systems, and are effective with temperatures of up to 100°C (most pipes in domestic central heating systems operate at around 70°C). APPLICATION:Used when fitting most types of pipe work. Polypropylene, also known as polypropene, is a thermoplastic polymer used in a wide variety of applications. An addition polymer made from the monomer propylene, it is rugged and unusually resistant to many chemical solvents, bases and acids.Pipe Clip Double Cliplock 15mm Box 50
Recoil Inserts are made from high quality stainless steel wire, with a diamond shaped cross section wound to the shape of a spring thread. The insert, which is larger in diameter than the tapped hole, is compressed during installation then allowed to spring back permanently anchoring the insert in the tapped hole. Because of its larger diameter the recoil insert has a greater contact area and is normally stronger than the original thread.Size. M12 x 1.75 Pitch.Length. 1 1/2 x Diameter
The Irwin HSS Pro Drillbits are made from high performance, high speed steel. They have an 118° split point shape for increased performance and very good centring. The drillbits ensure precision starting, with no need to pre-punch or pilot drill. They penetrate the material quickly, requiring little effort and feed pressure. Manufactured to DIN 338 standards. DIN 338 drillbits are suitable for many trade and industrial applications in alloyed and un-alloyed steel, non-ferrous metal, cast iron and plastics.The Irwin HSS Reduced Shank Pro Drill Bit has the following specification: Diameter: 16.0mm.Working length: 120mm.Total length: 178mm.Shank diameter: 10mm.
The IRWIN Vise-Grip straight Jaw Locking Pliers are suitable for general purpose and provide maximum strength and gripping capacity. Adjusting screw that tightens to draw materials closer together and also provides controlled release. Adjusts to various sizes. Straight serrated jaws with quick-release lever. 7RC: Length: 178mm, Capacity: 38mm.10RC: Length: 254mm, Capacity: 48mm.These Irwin Vise-Grip Straight Jaw Locking Pliers have the following specification: Length: 254mm (10in).Capacity: 48mm.
These ForgeFix ForgeFast Wood Screws have a universally accepted, Pozi compatible drive. They have 6 underhead lobes for improved countersinking and reduced surface dust, and reinforced countersunk necks which improve holding power. The screws have an anti-friction thread for reduced splitting of the timber, reduced 'jacking' and spinning of joined timber and improved drawing strength. The thread is serrated for improved pull-out and reduced torque when inserting the screw. The double cutting point allows faster drilling time and reduced clogging of wood dust and is capable of piercing 0.8mm steel. The screws have an 'Elementech 400' coating providing an anti-corrosive metal finish, which lasts up to 6 times longer than standard zinc coatings. The coating is environmentally friendly and does not contain Cr6+. It is salt spray tested to 400 hours. The screws are suitable for interior and exterior use. Every tub is supplied with a Torx® compatible bit.Size: 5.0 x 50mm.Pack quantity: 600.
The Hultafors ST30/15 Satellite Tape has a 10mm ‘Matt Coat’ polyester coated steel blade that has graduations in both metric and imperial. Fitted with a unique triple action end-loop and fold-in claw that enables the tape to be anchored into or over a wide variety of objects and surfaces. With a closed case design that protects the blade and internal workings with a hard-wearing, high-impact ABS case, ultrasonically welded for added strength, that fits comfortably into the palm of your hand. Rewinding is made easy and comfortable with the sturdy winding handle and rotating winding knob, which can then be stored neatly back into the centre of the tape. There is also an ABS belt clip moulded on to the rear of the case. Made in Britain. Specification: Length: 30m/100ftBlade Width: 10mmAccuracy: EC Class II
Female Water Stop Hose Connector 1/2in. A popular quick-release brass water hose fitting for use around the garden. Manufactured from high-quality brass. Suitable for use with all 1/2in bore garden hoses and compatible with all other UK water fittings. It allows fittings to be attached or removed without turning off the water source.
These Forgefix Screw Eyes are Zinc Plated for increased resistance to corrosion. They simply screw directly into timber and similar materials. Drilling a pilot hole is advisable. The screws are also suitable for use with all types of wall plugs. APPLICATIONScrew Eyes are used to attach cables, wires and twine to numerous applications. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminum and stainless steels by their oxide layers.Screw Eyes ZP 45 x 10g Bag 10
The Faithfull Hobbyists Clamp has a slim compact section design that is an advantage in a limited space. The high quality cast body provides strength and durability. The handle, screw and swivel pad are plated to resist rust. Ideal for the craftsman or DIY enthusiast.Capacity: 75mm (3in) Throat depth: 32mm (1.1/4in)
Box of 100 MasonMate Hex Concrete Screwbolts M6 x 50mm. The MasonMate Hex Concrete Screwbolts are ideal for anchoring in concrete, blocks, brick and stone. Zinc plated for increased durability with a self-tapping thread design. M6 x 50mm (100)
Straight hydraulic grease nipple. Manufactured from high quality steel, case hardened and plated ZN3 zinc and clear. Head forms conform to DIN 71412Thread M10 x 1.5. (10mm).
The Irwin Cordless Multi-Purpose Drill Bits have been designed for cordless low /min multi-purpose drilling. In tests they produced between 90-129% more holes per battery charge than leading competitors. They have a four-facet ground carbide tip for lower drilling pressure and better centring and allow for combined drilling into wood and brickwork: the Cordless Drillbit is excellent for such drilling jobs - where you drill through wood into brickwork. Only one drillbit is needed to do the job and will drill a wide selection of different materials like: Brickwork, Ceramic Tiles, Breeze Block, Wood, Dry Wall, Gypsum Board, Limestone, Slate, Marble, Eternite and Plastics/Reinforced plastics.Irwin Multi-Purpose Cordless Drill Bit Set 5 Piece Sizes: 5, 5.5, 6, 8 and 10mm.
This Facom sliding T bar has a 1/2 inch drive to fit 1/2 inch sockets or extensions. The T bar slides and has a friction head which allows the bar to be used as a T or L handle. Grooves at either end of the bar prevent it from sliding out the drive. The long bar enables more leverage, and easy two-handed use, thus making tightening and loosening fastenings easier. The FCMS120A Sliding T Handle is 275mm long. Performance: Conforms to ISO 3315, DIN 3122, NF ISO 3315.
The Stabila 80 AS-2 Spirit Level is fitted with 3 high-quality Stabila vials for optimum readability. They are made from a highly transparent, hard-wearing acrylic glass with precision-ground inner contours and fluorescent vial liquid. Two vertical vials for quick readings in all positions. It has a rectangular aluminium profile with reinforcing ribs for high stability and a secure grip. The coated measuring surfaces help protect delicate surfaces from damage and plastic end caps protect the profile against impact. Fitted with anti-slip stoppers that prevent the level from slipping. The level is easy to clean thanks to its electrostatic powder coating. Stabila installation technology ensures long-term accuracy. They have a measuring accuracy of ±0.5 mm/m in a normal position and ±0.75 mm/m in reverse position.1 x Stabila 80 AS-2 Spirit Level 3 Vial 19170 60cm
These Faithfull Diagonal Cutters are manufactured from chrome vanadium steel and undergoing stringent high voltage tests in accordance to EN 60900:2012. All Faithfull VDE rated tools can be used safely when working on live electrical wires at voltages of up to 1,000 volts AC. These heavy-duty side cutters have induction hardened cutting edges for superior cutting and a high leverage design means that less effort is required when cutting. Length: 190mm (7in).Cutting Capacity: Hard Wire: 1.8mm.
Marshalltown Nylon Mason's Line is bonded and braided for greater durability. It is not affected by extreme moisture, dryness or mildew. The line is ideal for staking out sites before concreting, landscaping or laying bricks or blocks.This Marshalltown Bonded Nylon Mason's Line has the following specification: Length: 152m (500ft)Colour: Flecked White
These Forgefix General Purpose Pozi Screws with countersunk heads have an electro brassed finish for increased durability and to suit most internal and decorative requirements. They are versatile screws, ideal for use in and with many materials. APPLICATION:Ideal for use in many decorative installations.Can be used with various screw cover caps. The Electro brassed process of electroplating is similar to the 'Galvanised' and 'Zinc Plated' processes but with the addition of a dye. It offers an aesthetically pleasing finish that is resistant to corrosion. The Pozidriv screw is similar in appearance to the classic Phillips cross-head, but in fact is very different. The Pozidriv has four additional points of contact, and does not have the rounded corners that the Phillips screw drive has. The biggest advantage it offers is that, when used with the correct tooling in good condition, it does not cam out, allowing great torque to be applied. The Pozidriv screw can easily be distinguished by a line embossed in the screw head at 45° to the slots for the driver. The screws' countersunk heads are designed to sink flush with substrates to leave a smooth surface finish. They have twin threads to enable an easy start when driving.General Purpose Pozi Screw Countersunk TT Electro Brass 1.1/2 x 6 Box 200
The Lessmann Wheel Brushes are fitted with a 6mm shank. The tight filling wire and powerful running makes these brushes excellent tools. These encapsulated brushes have a long service life due to the bedding of wire in plastic, which also prevents end breakage. The brushes have a consistent working width.The Lessmann Knotted Wheel Brushes are ideal for removing underseal, rust, de-burring and roughening. It has the following specification: Wire Type: Steel.Diameter: 75mm.Width: 8mm.Shank: 6mm.Wire Gauge: 0.50.Max Speed: 20,000/rpm.
Angled hydraulic grease nipple. Manufactured from high quality steel, case hardened and plated ZN3 zinc and clear. Head forms conform to DIN 71412Angle 90 .Thread 1/8in BSP.
MEXCO XCEL Grade Wax Filled (Hex Fit) Tile Drill Bits offers maximum performance and cost per cut when drilling the hardest of man-made and natural decorative materials. No water is required due to the special wax filled core which melts, lubricates and cools when drilling. For use on high speed corded drills. Suitable for dry cutting.
1 x MEXCO XCEL Grade Wax Filled (Hex Fit) Tile Drill Bit 12mm
The Faithfull Magnetic Mini Level is manufactured from aluminium extrusion with a resilient powder-coated finish. Shockproof end caps protect the level if dropped. A flush-mounted magnet in the base permits hands-free measuring on steel surfaces. This compact, pocket-sized level, for making accurate horizontal surfaces, is fitted with a solid acrylic vial, accurate to ± 1.0mm/m. Ideal for projects such as fitting power sockets, switches and levelling pictures. Specification: Vials: 1Accuracy: ± 1.0mm/mLength: 100mm (4in) (115mm including end caps)Section Size: 21 x 50mm
