The Bahco Radiator Valve Ratchet Set for installation and removal of heating valve nipples, tank connectors and short tap extensions. It comes with all the fittings, covering from small to large. Stepped along the length of the key for different internal hexagon and internal lug valve sizes. All components in the set have a chrome plated surface finish. Contains: 1 x Ratchet, 1 x Square Drive and 1 x Stepped Key in a practical plastic pouch. Conforms to ISO 3315 / DIN 3122 / ISO 1174-2 / DIN 3120 Sizes Covered: 3/8, 7/16, 1/2, 3/4 & 1in
The DEWALT Protector™ Safety Glasses have an ergonomic, ultralight design that provides an extremely comfortable fit for both men and women. ToughCoat™ hard coated lenses, provides tough protection against scratches. The distortion free lens reduces eye fatigue and is made from polycarbonate, to protect against impact resistance. The rubber-tipped temples provide a secure, comfortable fit. Conform to EN1661F standards. Offer 99.9% UVA/UVB Protection.These DEWALT Protector™ Safety Glasses have Clear lenses.
These Knipex 7201160 diagonal cutters are constructed from chrome vanadium solid style forged top quality steel with precision non-slip tips for added strength and durability. With high quality material and precise workmanship, these pliers give long service. The cutting edge tips provide a clean cut in soft materials - eg. thin copper wires. The narrow head style is ideal for use in confined areas. Like most of the Knipex range of pliers, all components have oil hardened edges, vanadium electric steel hardened forged to approximately 62 HRc. They are ideal for cutting soft wire close to a flat surface with the bevelled blade. The cutters have polished heads and plastic PVC dipped coated handles for added durability and comfort. Knipex 7201160 diagonal cutters are ideal for all trade or DIY applications and especially the electrical trade. These Knipex diagonal cutters are 160mm in length and are ideal for plastics and lead applications as they are flush cutting. High quality material and precise workmanship guarantee long service life. Length: 160mm (6 1/4 in).Soft materials only.
Flexovit powerfile sanding belts are made from tough and sharp high performance Aluminium Oxide making this product extremely durable, long lasting and suitable for use on a variety of surfaces. Suitable for use on wood, paint and metal. Size: 454 x 13mm.Packed in 4s
The Komelon PowerBlade™ II Pocket Tape has a Dura NY nylon coated steel dual printed blade with vertical blade markings on the reverse and patented hi-vis blade printing. The Dura NY nylon coating offers superior quality that lasts up to 15x longer. Its ergonomically designed ABS case with a moulded rubber grip provides increased comfort. The edges of the blade have been deburred. It also has a magnetic end hook. Available with both metric and imperial graduations or metric only.This Komelon PowerBlade™ II Pocket Tape has metric graduations only. Blade Length: 8mBlade Width: 27mmAccuracy: EC Class II
These Lindstrom Diagonal cutting nippers have an oval head. They are produced from high performance ball bearing steel which is black oxidised for increased durability. The numerically controlled machine grinding guarantees edge and angle accuracy and contact, which increases tool reliability and consistency. The edges are precision induction hardened to 63-65 HRC. The handles have a return spring and are sleeved. Ideal for wire harness work, and standard printed circuit board assembly. Oval heads are the most common type of nipper head. It combines strength and durability, can withstand and distribute the impact of cutting and is utilised in a myriad of applications.Length (A): 112mm (4.1/2in). Blade length (B): 12.5mm (0.5 in). Head width (C): 12.5mm (0.5 in). Head depth (D): 6.0mm (0.24 in). Tip width: (F): 1.2mm (0.05 in). Cutting capacity: 0.3-1.6mm. Cutting edge: Micro-bevel. The Micro-Bevel cut is designed to meet the requirements of the electronic assembly industry. Leads are ‘pinched’, allowing less altitude and a smaller overall surface area. Because of its design, it has a wide cutting range and variety of uses.
A professional knife featuring a top quality stainless steel blade attached with brass rivets to a hardwood handle. The blade is through tanged for heavy-duty application. For stripping paint, removing putty and also for debeading UPVC windows.Chisel Knife. Blade Width: 38mm (1.1/2in)
These Lindstrom Diagonal cutting nippers have an oval head. They are produced from high performance ball bearing steel which is black oxidised for increased durability. The numerically controlled machine grinding guarantees edge and angle accuracy and contact, which increases tool reliability and consistency. The edges are precision induction hardened to 63-65 HRC. The handles have a return spring and are sleeved. Ideal for wire harness work, and standard printed circuit board assembly. Oval heads are the most common type of nipper head. It combines strength and durability, can withstand and distribute the impact of cutting and is utilised in a myriad of applications.Length (A): 110 mm (4.3/8 in). Blade length (B): 10mm (0.39 in). Head width (C): 10mm (0.39 in). Head depth (D): 6mm (0.24 in). Tip width: (F): 0.8mm (0.03 in).Cutting Capacity: 0.1-1.0mm. Cutting edge: Ultra flush. The Ultra flush cutter virtually eliminates the pinch that other cutters make. The cutters configure two flat planes, with a barely discernible line separating each of these planar surfaces. They are perfect for use in close tolerance electronic and medical device assembly, where concerns about final lead-end configuration and mechanical shock transmission are a top priority.
The Starrett Deep Cut Bi-Metal Holesaws combine the tried and tested tooth form used on the previous Dual Pitch Holesaw, with a new tooth material for enhanced heat and wear resistance. The Deep Cut saw also features an increased hole saw depth of 51mm (2in), and is ideal for cutting metal of more than 3mm thickness, tubes with a wall thickness of greater than 3mm and wood up to 51mm (2in) thick. Cutting Depth: 51mm.Starrett DCH177M Deep Cut Bi Metal Holesaw has the following specification: Diameter: 177mm (6.31/32in).
The Starrett Deep Cut Bi-Metal Holesaws combine the tried and tested tooth form used on the previous Dual Pitch Holesaw, with a new tooth material for enhanced heat and wear resistance. The Deep Cut saw also features an increased hole saw depth of 51mm (2in), and is ideal for cutting metal of more than 3mm thickness, tubes with a wall thickness of greater than 3mm and wood up to 51mm (2in) thick. Cutting Depth: 51mm.Starrett DCH0338 Deep Cut Bi Metal Holesaw has the following specification: Diameter: 86mm (3.3/8in).
The Starrett Deep Cut Bi-Metal Holesaws combine the tried and tested tooth form used on the previous Dual Pitch Holesaw, with a new tooth material for enhanced heat and wear resistance. The Deep Cut saw also features an increased hole saw depth of 51mm (2in), and is ideal for cutting metal of more than 3mm thickness, tubes with a wall thickness of greater than 3mm and wood up to 51mm (2in) thick. Cutting Depth: 51mm.Starrett DCH0212 Deep Cut Bi Metal Holesaw has the following specification: Diameter: 64mm (2.1/2in).
The Starrett Deep Cut Bi-Metal Holesaws combine the tried and tested tooth form used on the previous Dual Pitch Holesaw, with a new tooth material for enhanced heat and wear resistance. The Deep Cut saw also features an increased hole saw depth of 51mm (2in), and is ideal for cutting metal of more than 3mm thickness, tubes with a wall thickness of greater than 3mm and wood up to 51mm (2in) thick. Cutting Depth: 51mm.Starrett DCH0334 Deep Cut Bi Metal Holesaw has the following specification: Diameter: 95mm (3.3/4in).
The Starrett Deep Cut Bi-Metal Holesaws combine the tried and tested tooth form used on the previous Dual Pitch Holesaw, with a new tooth material for enhanced heat and wear resistance. The Deep Cut saw also features an increased hole saw depth of 51mm (2in), and is ideal for cutting metal of more than 3mm thickness, tubes with a wall thickness of greater than 3mm and wood up to 51mm (2in) thick. Cutting Depth: 51mm.Starrett DCH210M Deep Cut Bi Metal Holesaw has the following specification: Diameter: 210mm (8.9/32in).
The Starrett Deep Cut Bi-Metal Holesaws combine the tried and tested tooth form used on the previous Dual Pitch Holesaw, with a new tooth material for enhanced heat and wear resistance. The Deep Cut saw also features an increased hole saw depth of 51mm (2in), and is ideal for cutting metal of more than 3mm thickness, tubes with a wall thickness of greater than 3mm and wood up to 51mm (2in) thick. Cutting Depth: 51mm.Starrett DCH0218 Deep Cut Bi Metal Holesaw has the following specification: Diameter: 54mm (2.1/8in).
Bahco D/S14 1/2in drive impact socket set with a a black finish and made from high performance alloy steel. To be used with machines, for maxium safety use clamping springs. Conforms to DIN 3121-G 12,5 ISO 1174 standards. Supplied in a carry case with a 1 piece removable three section plastic box. Size: 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 21, 22, 24 and 27mm.
The Starrett Deep Cut Bi-Metal Holesaws combine the tried and tested tooth form used on the previous Dual Pitch Holesaw, with a new tooth material for enhanced heat and wear resistance. The Deep Cut saw also features an increased hole saw depth of 51mm (2in), and is ideal for cutting metal of more than 3mm thickness, tubes with a wall thickness of greater than 3mm and wood up to 51mm (2in) thick. Cutting Depth: 51mm.Starrett DCH0034 Deep Cut Bi-Metal Holesaw has the following specification: Diameter: 19mm (3/4in).
The Starrett Deep Cut Bi-Metal Holesaws combine the tried and tested tooth form used on the previous Dual Pitch Holesaw, with a new tooth material for enhanced heat and wear resistance. The Deep Cut saw also features an increased hole saw depth of 51mm (2in), and is ideal for cutting metal of more than 3mm thickness, tubes with a wall thickness of greater than 3mm and wood up to 51mm (2in) thick. Cutting Depth: 51mm.Starrett DCH160M Deep Cut Bi Metal Holesaw has the following specification: Diameter: 160mm (6.5/16in).
The Starrett Deep Cut Bi-Metal Holesaws combine the tried and tested tooth form used on the previous Dual Pitch Holesaw, with a new tooth material for enhanced heat and wear resistance. The Deep Cut saw also features an increased hole saw depth of 51mm (2in), and is ideal for cutting metal of more than 3mm thickness, tubes with a wall thickness of greater than 3mm and wood up to 51mm (2in) thick. Cutting Depth: 51mm.Starrett DCH0600 Deep Cut Bi Metal Holesaw has the following specification: Diameter: 152mm (6in).
The Starrett Deep Cut Bi-Metal Holesaws combine the tried and tested tooth form used on the previous Dual Pitch Holesaw, with a new tooth material for enhanced heat and wear resistance. The Deep Cut saw also features an increased hole saw depth of 51mm (2in), and is ideal for cutting metal of more than 3mm thickness, tubes with a wall thickness of greater than 3mm and wood up to 51mm (2in) thick. Cutting Depth: 51mm.Starrett DCH0138 Deep Cut Bi Metal Holesaw has the following specification: Diameter: 35mm (1.3/8in).
The Starrett Deep Cut Bi-Metal Holesaws combine the tried and tested tooth form used on the previous Dual Pitch Holesaw, with a new tooth material for enhanced heat and wear resistance. The Deep Cut saw also features an increased hole saw depth of 51mm (2in), and is ideal for cutting metal of more than 3mm thickness, tubes with a wall thickness of greater than 3mm and wood up to 51mm (2in) thick. Cutting Depth: 51mm.Starrett DCH0078 Deep Cut Bi Metal Holesaw has the following specification: Diameter: 22mm (7/8in).
The Starrett Deep Cut Bi-Metal Holesaws combine the tried and tested tooth form used on the previous Dual Pitch Holesaw, with a new tooth material for enhanced heat and wear resistance. The Deep Cut saw also features an increased hole saw depth of 51mm (2in), and is ideal for cutting metal of more than 3mm thickness, tubes with a wall thickness of greater than 3mm and wood up to 51mm (2in) thick. Cutting Depth: 51mm.Starrett DCH0400 Deep Cut Bi Metal Holesaw has the following specification: Diameter: 102mm (4in).
The Starrett Deep Cut Bi-Metal Holesaws combine the tried and tested tooth form used on the previous Dual Pitch Holesaw, with a new tooth material for enhanced heat and wear resistance. The Deep Cut saw also features an increased hole saw depth of 51mm (2in), and is ideal for cutting metal of more than 3mm thickness, tubes with a wall thickness of greater than 3mm and wood up to 51mm (2in) thick. Cutting Depth: 51mm.Starrett DCH0134 Deep Cut Bi Metal Holesaw has the following specification: Diameter: 44mm (1.3/4in).
Knipex concentrate their knowledge and expertise on pliers, wrenches and cutters. This is the only way to justify there claim they are the best supplier in terms of quality, innovation and efficiency. Knipex products satisfy the highest expectations in terms of performance, ergonomics and service life. There products are designed to meet the requirements of professional users, who must be able to rely on their tools in day-to-day work. With over a thousand separate styles and sizes. Knipex offer a complete range of pliers for almost every application in trade and industry. The breadth and depth of their range ensures that the best tool can always be found for every application. Particular attention is paid to ergonomic criteria in the production of their pliers and cutters, above all in the form of effort-reducing constructions and a handle design which is ideally suited to the moving hand and ensures minimum fatigue and safe work. The Knipex KPX975110 are a professional tool for cutting and stripping unshielded ribbon, telephone cables and for crimping 6 and 8 pole western plugs type RJ 11/12 (9.65 mm width) and type RJ 45 (11.68 mm width). Exact crimping process due to parallel crimping and repetitive, high crimping quality due to integral lock. There is a built in Stripping device for round cables. The KPX975110 are fitted with cushion grip handles for added grip and user comfort. Capacity RJ 11/12 (6-poles) 9.65 mm and RJ 45 (8-poles) 11.68 mmLength 7 15/32-inches Weight 12 ounces
These Knipex 97 21 Crimping Pliers for cutting cables, stripping wires and crimping insulated and non-insulated terminals, connectors and plug type connectors. With threaded holes for cutting copper and brass threaded screws. M2.6 - M3 - M3.5 - M4 - M5. For insulated terminals and cable connectors of 0.5 - 6.0mm².
The Purdy® Colossus™ Sleeve is made from an exclusive formulation of 100% polyamide. They lay paint off very smoothly and carry a remarkable amount of material to the surface without dripping or splattering. This sleeve rolls one-third further than traditional lambskin roller covers and backrolls over 10,000 ft², other products wear out in less than half the time. Perfect for rolling a great deal of new drywall quickly. Colossus™ Roller Sleeves hold and release more paint than any other Purdy® roller fabric. Designed for heavy-duty painting projects. Also great for stucco, T1-11 siding, brick or rough-textured walls.This Purdy® Colossus™ Sleeve has the following specification: Material: 100% woven polyamideSize: 305mm (12in)Nap Depth: 25mm (1in)Core: 38mm (1.1/2in)
The Knipex 87 01 Cobra® Series Water Pump Pliers have automatic adjustment and can be opened and adjusted directly at the workpiece with one hand. These cobra pliers close with a push of a button and provide a good strong grip on any job application. The integrated spring of the automatic adjustment is shielded in the handles for user safety and the gripping surfaces have special hardened teeth which are hardened to approx. 61 HRC. They are low wearing but offer a secure gripping action. With fine adjustment, which ensures optimum adjustment to differently sized workpieces, user-friendly handle position and a secure catching of the hinge bolt any unintentional shifting in use is avoided. The box-joint design is high in stability and the double guide will hold securely on nuts or bolts without slipping on the workpiece. Low hand force is required. These Knipex Water Pump pliers have a user friendly guard to prevent the operators fingers being pinched. The pliers are made from strong chrome vanadium electric steel that has been forged and then oil-hardened for added strength and durability. These pliers have PVC dipped handles for user comfort and a positive grip.Knipex 87 01 400 Cobra® Water Pump Pliers PVC Grip 400mm ;
A highly durable, solvent-borne, highly translucent satin woodstain. Cetol Filter 7 is a highly translucent satin exterior woodstain for windows and doors. It can be used as a maintenance coat for existing woodstain systems or over a base stain of Cetol HLS on new or bare timbers. Cetol Filter 7 is an exterior woodstain for windows and doors, either as a one-coat maintenance application for existing woodstain systems or two coats over a base stain of Cetol HLS on new or bare timbers. Its advanced UV light absorbers provide superior protection from the damaging effects of sunlight on timber. It is not, however, suitable for decking or other areas subjected to high levels of abrasion.The Sikkens SIKCF7PLO25 Cetol Filter 7 Plus Translucent Woodstain comes in the following:Colour: Light OakSize: 2.5 litre
Bahco Chalk Powder is suitable for use with Bahco chalk line as well as other makes. The chalk is available in blue, red, white and yellow. Weight: 227g.The BAHCLYELLOW chalk powder has the following specifications:Colour: Yellow. Weight: 227g.
Flexovit cloth sanding belts are made from tough and sharp high performance Aluminium Oxide. This product is extremely durable, long lasting and suitable for use on a variety of surfaces. Available in multiple sizes to suit most brands of belt sanders, and suitable for use on wood, paint and metal.Pack of 2 Flexovit Cloth Sanding Belts 610 x 100mm 80g Medium
Knipex CoBolt® S Compact Bolt Cutters are specially designed for small hands. Made from forged heavy-duty, chrome vanadium steel and oil-hardened multiple times. With precision cutting edges that have been induction hardened, approx. 64 HRC, ideal for cutting soft and hard wire as well as piano wire. Cuts components such as bolts, nails, rivets etc. up to Ø4.4mm. The efficient joint design ensures exceptional cutting performance with little effort. The microstructure on cutters keeps the material to be cut in a good insertion position for optimal use of the mechanics. There is also a gripping surface below the joint for gripping and pulling wires with a diameter from 1.0mm. Fitted with ergonomically PVC coated styled handles for added grip and comfort. Specification: Length: 160mmCutting Capacity Ø: Soft Wire 5.3mm, Medium-Hard Wire 4.4mm, Hard Wire 3.2mm, Piano Wire 3mm
The Knipex 03 01 series traditional combination pliers are equipped with hardened cutting edges for hard or soft wire up to 2.5mm diameter. The pliers have all the signs of Knipex technology and quality. The oil hardened and tempered construction will give these pliers a longer working life. Knipex 03 01 series combination pliers have separately induction hardened cutting edges that are hardened to approximately 60HRc. They have polished heads and PVC dipped handles. These Knipex pliers have gripping zones for flat and round material. This gives the pliers added grip and makes them ideal for home use, DIY or trade applications. They come in 160, 180 and 200mm versions.These Knipex Combination Pliers ;have the following specification: Length: 200mm (8in).Cutting ;Capacity: Hard: 2.5mm, Medium Hard: 3.8mm, Multi-Strand: 13.0mm.
Sikkens Cetol HLS Plus Translucent Woodstain is a low build, solvent-borne semi - gloss woodstain that can be used both as a base stain and as a finishing coat. It is highly translucent to bring out the beauty of woodgrain, it protects against mould and algae and is resistant to UV radiation, peeling and cracking. Cetol HLS Plus is also microporous and water-repellent It can be used as a finishing coat on exterior softwood and hardwood substrates such as cladding, fascias, soffits, rough sawn timber and fencing. As a base stain, Cetol HLS plus is readily absorbed into timber to provide a sound base for finishing coats. It can be used alone as a system on cladding, decking and garden furniture or as a base stain before the application of Cetol Filter 7 plus or Cetol THB plus on windows and doors. However it should not be used alone as a finish for hardwood timbers.The Sikkens SIKCHLSPLO25 Cetol HLS Plus Translucent Woodstain comes in the following:Colour: Light OakSize: 2.5 litre
The Knipex 71 Series CoBolt® Compact Bolt Cutters have a lever action mechanism which guarantees an extremely favourable lever ratio with low friction, and cutting performance is 20 times higher than the hand force applied (requires 60 % less effort). CoBolt® compact bolt cutters are ideal for piano wire or for soft solid wire, bolts, nails, rivets and screws. Induction-hardened and with precision cutting edges. Edge hardness approximately 64HRc for added strength and durability, they have exceptional cutting performance with minimal physical effort because of the lever action.This Knipex CoBolt® Compact Bolt Cutter is fitted with ergonomic multi-component grips for added grip and comfort. Opening spring and locking device are integrated in the handles also for comfortable work and protected transport. It has the following specification: Length: 200mm.Cutting Capacity (mm): Soft Wire: 6, Medium-Hard Wire: 5.2, Hard Wire 4, Piano Wire: 3.6.
The Knipex 46 11 series of external straight circlip pliers are constructed from chrome vanadium solid style forged top quality steel with precision non-slip tips for added strength and durability. With opening spring. The slim head style allows use in confined areas. Like most of the Knipex range of pliers, all components are oil-hardened with polished heads and plastic coated handles. Knipex circlip pliers are ideal for all trade or DIY applications and especially the automotive trade.Bore size: 19 - 60 mm. External Straight - length 180 mm.
The Knipex 95 12 200 cable shears with twin cutting edges are ideal for cutting copper and aluminium cables, single and multiple wire cables but are not suitable for steel wire and hard drawn copper conductors. These Knipex cable shears have precision ground and hardened blades, that will give the user a good professional finish to any job application, with clean and smooth cutting without crushing and deformation of the desired material. The 95 12 200 200mm cable cutters can be easily operated with one-hand, low effort required due to high transmission ratio and new blade geometry, there is a protective guard to help stop pinching of the hands, an adjustable screw joint for tension settings. Made from high-grade vanadium special tool steel, that has been forged and then oil-hardened, for a longer, robust working life. Length: 200mm (8in).Cutting Capacity: 20mm.These Knipex Cable Shears are fitted with PVC coated handles for added comfort and grip.
The Flexovit Clipper® 115mm Multi-Materials Cutting Discs can be used for cutting brick, metal, pipe, floor tiles etc. Supplied in a handy tin with 10 discs. Manufactured to EN 12413 Standards. Specification: Size: 115 x 22.23mm BoreThickness: 1.0mmMax. Cutting Speed: 13,300/min 80 m/s
