The popular Eclique 2 from Varilight is now available in a grid format. This means you can now mix masters, slaves and ordinary switches all on the same plate
_Varilight Eclique 2 PowerGrid Insert
_2 Way Push-On Push-Off. Allows 2 way dimming when linked to a slave on the same circuit.
_Wattage: 100W of LED.
_Available in polished chrome or stainless steel finishes.
Standard V-Pro dimmers have a push-on/push-off switch action with rotary dimming. You can change the driving modes and adjust the minimum brightness with pushes of the dimmer control and using signals from the lamps. You can view the programming instructions on the dimmer leaflet or, alternatively, you can view Varilight video on YouTube using this link:- https://www.youtube.com/watch?v=Id1E2hQpX-w . V-Pro series dimmers are designed for use with LEDs and they are also suitable for halogen and incandescent lighting, most dimmable electronic transformers and with no minimum load, are suitable for dimmable low energy lighting. The V-Pro Series, eliminates Dimmer Buzz For GLS Bulbs, GU10 Lamps, and LV Transformers Including Trailing Edge Loads and is equipped with Self Re-setting Overload Protection, so is able to handle overload situations, for example, if the wattage of the bulbs/lamps are accidentally too high on a circuit. This is achieved by the dimmer cutting out before there is any damage, (if the watts are grossly overloaded), until the load is reduced. The dimmer also contains a heat sensor which again stops damage to the dimmer, if it becomes too hot. Please adhere to maximum rating listed on the Varilight datasheets on their website or copy and paste the link for the V-Pro instruction leaflet: - http://www.varilight.co.uk/leaflets/VARILIGHT%20V-Pro%20Dimmer%20Instructions%20776.pdf .These dimmers do not work with lighting panels (LED or CFL) and are not suitable for wire-wound "toroidal" transformers. Please note that only good quality dimmable LEDs should be used. If this dimmer is purchased and the LED lamps are not compatible, the dimmer is not faulty so cannot be returned, but a better quality LED lamp/bulb should be fitted instead. Trailing and Leading Edge Dimmer, please refer to instructions provided with the dimmer, which explains all 3 dimming modes.
_Dimmable LED load 10w-120w (per dimmer)
_Suitable for 1-10 good quality LED lamps per dimmer module
_For Incandescent bulbs, mains, eco and L/V halogen bulbs please click on the link in the product description below.
_V-Pro dimmer are suitable for dimmable LEDs, dimmable ESLs, electronic transformers, trailing edge, standard bulbs, GU10 and mains halogen
_Fits a 25 mm wall box
Only suitable for use with Varilight PowerGrid plates, not suitable for other grid plate makes (different size to MK).
_Retractive Switch
_10A Multi-Way Push Retractive Switch
_Modules suitable for all PowerGrid frontplates
_Multi-way circuits
_Suitable for controlling both mains and low voltage lighting
Varilight 100W V-Pro Power Grid dimmer insert suitable for dimming LED downlights and GU10 LEDs.
_Varilight PowerGrid Insert
_2 Way Push-On Push-Off
_Wattage: 100W of LED.
_Extending flexibility and choice for the Varilight range
Varilight 100W V-Pro Power Grid dimmer insert suitable for dimming LED downlights and GU10 LEDs.
_Varilight PowerGrid Insert
_2 Way Push-On Push-Off
_Wattage: 100W of LED.
_Extending flexibility and choice for the Varilight range
Varilight V-Pro for Standard and LED loads We have carefully selected our products that are quality standard of great value. With us you are always in good hands.
_Dimmable LED load 10w-120w (per dimmer)
_Suitable for 1-10 good quality LED lamps per dimmer module
_For Incandescent bulbs, mains, eco and L/V halogen bulbs please click on the link in the product description below.
_V-Pro dimmer are suitable for dimmable LEDs, dimmable ESLs, electronic transformers, trailing edge, standard bulbs, GU10 and mains halogen
_Fits a 25 mm wall box
The Varilight Georgian range has a roped finish on the edge of the plate. Covered by the Varilight 10 year guaranty. Single plate size: 95mm x 95mm. Double plate size: 95mm x 155mm. 13A Plug sockets: Require a 25mm deep wall box. USB sockets are 2.1A. Rocker Light Switches: 2 way (unless stated as intermediate), 10A rated and require a 16mm deep wall box. Halogen & LED Dimmers: 2 Way. Please check product title for dimmer spec and maximum and minimum load. Require a 25mm wall box. Shaver Socket: Require a 47mm deep wall box. Dual Voltage Shaver Socket 240V/115V. Cooker Switch: Require a 35mm deep wall box. 45 Amp Double pole. Fused Spur: Require a 25mm deep wall box. 13 Amp Double pole. TV Socket: Require a 16mm deep wall box. TV socket for use with male co-axial plugs. Fan Isolator: Require a 16mm deep wall box. 10A Fan Isolating Switch (3 Pole). Triple pole switching. DataGrid Plates: Clip in any combination of DataGrid modules (need to be bought from us separately). Compatible with all standard Euro data modules (Varilight, Triax, RetroTouch etc). Create your own data combinations. Touch/Remote LED Dimmers: V-Pro IR (infra-red) Dimmers. 0-100W (1-10 LEDs). Require a 25mm deep wall box. V-Pro intelligent dimming technology. Touch control or remote control from dedicated handset (not included, Varilight YRC8 can be bought separately), or can use a spare button on an existing handset (e.g. TV remote). 1-way or multi-way when used with V-Pro IR dimming slave unit(s). Soft start feature and intelligent overload protection. Touch Slaves: Can not be used on their own, must be used with a master dimmer to make a 2 way or multi-way circuit. Require a 25mm deep wall box.
_Fan Isolating Rocker Switch
_10A Fan Isolating Switch (3 Pole)
_Triple pole switching
_Wide rocker for easy operation
_Roped edge faceplate
The Varilight Screwless low profile collection offers minimalism with style and a flawless finish. The plate just clips on after installation. Each switch does need to be earthed and is designed to fit into UK standard wall boxes. Covered by the Varilight 10 year guaranty. Single plate size: 86mm x 86mm. Double plate size: 86mm x 147mm. 13A Plug sockets: Require a 35mm deep wall box. USBÕs are 2.1A. Rocker & Toggle Light Switches: 2 way (unless stated as intermediate), 10A rated and require a 25mm deep wall box. Halogen & LED Dimmers: 2 Way. Please check product title for dimmer spec and maximum and minimum load. Require a 35mm wall box. 5 Amp Socket: Require a 35mm deep wall box. Shaver Socket: Require a 47mm deep wall box. Dual Voltage Shaver Socket 240V/115V. Suitable for use in bathrooms, toilets and shower rooms (IP41). Cooker Switch: Require a 35mm deep wall box. 45 Amp Double pole. Fused Spur: Require a 35mm deep wall box. 13 Amp Double pole. TV Socket: Require a 25mm deep wall box. 20 Amp: Require a 25mm deep wall box. Fan Isolator: Require a 35mm deep wall box. 10A Fan Isolating Switch (3 Pole). DataGrid Plates: Clip in any combination of DataGrid modules (need to be bought from us separately). Compatible with all standard Euro data modules (Varilight, Triax, RetroTouch etc). Create your own data combinations. Touch/Remote LED Dimmers: V-Pro IR (infra-red) Dimmers. 0-100W (1-10 LEDs). Require a 35mm deep wall box. V-Pro intelligent dimming technology. Touch control or remote control from dedicated handset (not included, Varilight YRC8 can be bought separately), or can use a spare button on an existing handset (e.g. TV remote). 1-way or multi-way when used with V-Pro IR dimming slave unit(s). Soft start feature and intelligent overload protection. Touch Slaves: Can not be used on their own, must be used with a master dimmer to make a 2 way or multi-way circuit. Require a 35mm deep wall box.
_2-Way Rocker Switch
_4-Gang 10A 1- or 2-Way Rocker Switch (Twin Plate)
_1- or 2-way switching
_Suitable for controlling both mains and low voltage lighting
_Sleek, low-profile screwless faceplate
JYP401.CU. Varilight goal is to provide customers with many high quality products and satisfy the needs of all customers. To achieve this, Varilight will spend more time using and designing the products.
_Can be connected 1 way or 2 way. Push on / push off. V-Pro intelligent dimming technology
_Programmable leading / trailing edge. Soft start feature and intelligent overload protection . Adjustable minimum brightness setting and choice of driving modes
_Not suitable for use with fluorescent bulbs and tubes, flat panel fittings, wire-wound or toroidal transformers or electric motors
_0 - 120 watt LED. 300 watt traditional halogen.
_Manufactured to BS EN 60669-2-1. CE approved
The British made Varilight V-Pro is an award winning, high quality universal dimmer switch that is compatible with LED lamps and downlights. This includes mains voltage GU10 LEDs and integrated LED downlights, it also works with CFL, halogen and incandescent.
_Available in 1, 2, 3 or 4 gang options.
_1 way or 2 way operation. Allows dimming from 1 side of the room and switching from another. If 2 way dimming is required then see the Varilight Eclique range were a master and slave touch dimmer can be used.
_Control knob has push on / off function.
_With soft start and automatic overload protection.
Only suitable for use with Varilight PowerGrid plates, not suitable for other grid plate makes (different size to MK).
_20A Switch
_20A 1-Way Double Pole Switch 'Cooker Hood'
_Modules suitable for all PowerGrid frontplates
_Engraved with 'Cooker Hood' to enable easier identification
_Double pole switching
The British made Varilight V-Pro is an award winning, high quality universal dimmer switch that is compatible with LED lamps and downlights. This includes mains voltage GU10 LEDs and integrated LED downlights, it also works with CFL, halogen and incandescent.
_Available in 1, 2, 3 or 4 gang options.
_1 way or 2 way operation. Allows dimming from 1 side of the room and switching from another. If 2 way dimming is required then see the Varilight Eclique range were a master and slave touch dimmer can be used.
_Control knob has push on / off function.
_With soft start and automatic overload protection.
The British made Varilight V-Pro is an award winning, high quality universal dimmer switch that is compatible with LED lamps and downlights. This includes mains voltage GU10 LEDs and integrated LED downlights, it also works with CFL, halogen and incandescent.
_Available in 1, 2, 3 or 4 gang options.
_1 way or 2 way operation. Allows dimming from 1 side of the room and switching from another. If 2 way dimming is required then see the Varilight Eclique range were a master and slave touch dimmer can be used.
_Control knob has push on / off function.
_With soft start and automatic overload protection.
Classic Brushed Steel 1-Gang 2-Way Push-On/Off Rotary LED Dimmer 1 x 0-120W (1-10 LEDs)
_Power and brightness: 120 watts at 230v
_Finish: Brushed Steel
_Dimensions: 47mm x 91mm x 91mm
Ultraflat Polished Chrome 2-Gang 2-Way Push-On/Off Rotary LED Dimmer 2 x 0-120W (1-10 LEDs)
_Power and brightness: 120 watts at 230v
_Finish: Chrome
_Dimensions: 47mm x 89mm x 89mm
WSD3 Varilight Matrix 3-Gang Double Plate Flexible Dimmer System Kit Containing Unpopulated Classic Matt Chrome (Brushed Steel Effect) Curved Edge Plate, 3x Brushed Steel Dimmer Knobs, 3x Fixing Nuts, and a Tool For Assembling This Matrix Product
_Choose from 1&2 Gang Single and 1, 2, 3, & 4 Gang Double Plates
_Varilight's Matrix Flexible Dimmer System Kit
_Create your own bespoke dimmer module configurations
_Cut down on dimmer module wastage with this unique kit
_Included is an assembly tool to fasten chosen dimmer module to plate
_Curved edge faceplate
_Fits in a 25mm Deep Wall Box, depending on choice of dimmer module
_88 x 148 MM
2-Gang 13A Single Pole Switched Socket with 1x USB A & 1x USB C Charging Ports
_Load Rating:13A Socket, 20W Shared USB Charging
_Varilight are a UK manufacturer with a 10 year warranty on all products.
_Complete range of switches and sockets available in each finish.
The Varilight Urban range features a contemporary bevel-edge plate style with an 8mm depth from front to back of plate. Covered by the Varilight 10 year guaranty. Single plate size: 91mm x 91mm. Double plate size: 91mm x 150mm. 13A Plug sockets: Require a 25mm deep wall box. USBÕs are 2.1A. Rocker Light Switches: 2 way (unless stated as intermediate), 10A rated and require a 16mm deep wall box. Halogen & LED Dimmers: 2 Way. Please check product title for dimmer spec and maximum and minimum load. Require a 25mm wall box. 5 Amp Socket: Require a 25mm deep wall box. Shaver Socket: Require a 47mm deep wall box. Dual Voltage Shaver Socket 240V/115V. Suitable for use in bathrooms, toilets and shower rooms (IP41). 240V accepts British and Continental round pin and Australia flat-pin. 115V accepts Continental two-pin and America NEMA. Cooker Switch: Require a 35mm deep wall box. 45 Amp Double pole. Fused Spur: Require a 25mm deep wall box. 13 Amp Double pole. TV Socket: Require a 16mm deep wall box. TV socket for use with male co-axial plugs. Fan Isolator: Require a 16mm deep wall box. 10A Fan Isolating Switch (3 Pole). Triple pole switching. DataGrid Plates: Clip in any combination of DataGrid modules (need to be bought from us separately). Compatible with all standard Euro data modules (Varilight, Triax, RetroTouch etc). Create your own data combinations. Touch/Remote LED Dimmers: V-Pro IR (infra-red) Dimmers. 0-100W (1-10 LEDs). Require a 25mm deep wall box. V-Pro intelligent dimming technology. Touch control or remote control from dedicated handset (not included, Varilight YRC8 can be bought separately), or can use a spare button on an existing handset (e.g. TV remote). 1-way or multi-way when used with V-Pro IR dimming slave unit(s). Soft start feature and intelligent overload protection. Touch Slaves: Can not be used on their own, must be used with a master dimmer to make a 2 way or multi-way circuit. Require a 25mm deep wall box.
_2-Way Rocker Switch
_3-Gang 10A 1- or 2-Way Rocker Switch
_1- or 2-way switching
_Suitable for controlling both mains and low voltage lighting
_Bevelled edge faceplate
The Varilight Urban range features a contemporary bevel-edge plate style with an 8mm depth from front to back of plate. Covered by the Varilight 10 year guaranty. Single plate size: 91mm x 91mm. Double plate size: 91mm x 150mm. 13A Plug sockets: Require a 25mm deep wall box. USBÕs are 2.1A. Rocker Light Switches: 2 way (unless stated as intermediate), 10A rated and require a 16mm deep wall box. Halogen & LED Dimmers: 2 Way. Please check product title for dimmer spec and maximum and minimum load. Require a 25mm wall box. 5 Amp Socket: Require a 25mm deep wall box. Shaver Socket: Require a 47mm deep wall box. Dual Voltage Shaver Socket 240V/115V. Suitable for use in bathrooms, toilets and shower rooms (IP41). 240V accepts British and Continental round pin and Australia flat-pin. 115V accepts Continental two-pin and America NEMA. Cooker Switch: Require a 35mm deep wall box. 45 Amp Double pole. Fused Spur: Require a 25mm deep wall box. 13 Amp Double pole. TV Socket: Require a 16mm deep wall box. TV socket for use with male co-axial plugs. Fan Isolator: Require a 16mm deep wall box. 10A Fan Isolating Switch (3 Pole). Triple pole switching. DataGrid Plates: Clip in any combination of DataGrid modules (need to be bought from us separately). Compatible with all standard Euro data modules (Varilight, Triax, RetroTouch etc). Create your own data combinations. Touch/Remote LED Dimmers: V-Pro IR (infra-red) Dimmers. 0-100W (1-10 LEDs). Require a 25mm deep wall box. V-Pro intelligent dimming technology. Touch control or remote control from dedicated handset (not included, Varilight YRC8 can be bought separately), or can use a spare button on an existing handset (e.g. TV remote). 1-way or multi-way when used with V-Pro IR dimming slave unit(s). Soft start feature and intelligent overload protection. Touch Slaves: Can not be used on their own, must be used with a master dimmer to make a 2 way or multi-way circuit. Require a 25mm deep wall box.
_2-Way Toggle Switch
_1-Gang 10A 1- or 2-Way Toggle Switch
_1- or 2-way switching
_Suitable for controlling both mains and low voltage lighting
_Bevelled edge faceplate
Range: MultiGrid Module Finish: Black : Modules for MK, GET, Crabtree Grids Insert/Knob Colour: Black Insert Barcode: 5021575004519 Dimensions: 54x26x50mm Product Weight: 50g Fixing Centres: N/A Depth from Mounting Face: Recommended Back Box Depth: 35mm Operating Voltage: 220/250V AC Maximum Load Rating: LED; 300W (Max. 20 Lamps) Maximum Current Rating: 1.3A Terminal (Live) Diameter: 3.2mm; Capacity: 3 x 1.5mm_ Terminal (Earth) Diameter: 3.3mm; Capacity: 3 x 1.5mm_ V-Pro intelligent dimming technology Soft start feature and intelligent overload protection Adjustable minimum brightness setting and choice of driving modes Create your own switch combinations Suitable for MK, GET Schnider and Crabtree Grid Plates Intended Applications: Indoor Use Only. Domestic lighting circuits including many dimmable LEDs. Safety Advice: Not suitable for use with non-dimmable fluorescent bulbs and tubes, wire-wound or toroidal transformers, TRIAC dimmable loads or electric motors. Do not overload. Applicable Safety Standard: BS EN 60669-2-1 Commodity Code: 85365007
_Max Load = 20 LEDs up to a total wattage of 300W /
_Min Load = 0W - suitable for 1 - 20 dimmable LEDs
_Not suitable for non-dimmable LED lamps
_Suitable for MK, GET Schnider and Crabtree Grid Plates
Varilight classic 2 gang single pole 13 amps metal rockers switches and socket with USB charging ports. The USB port detects the device to be charged and optimises its output accordingly to achieve the fastest possible charging speed.
_Choose stylish plate finish options: - Mirror Chrome - Iridium Black - Satin - Victorian Brass
_Insert colours options: Black or White
_Metal Switches
_2 Gang
Varilight Datagrid plates allow you to create a multitude of data points that include CAT5E, HDMI, RJ45 and coaxial sockets to name just a few. Available in the popular screw less flat plate finish you can choose between a variety of grid plate sizes from 1 to 4 gang and large selection of finishes.
_Available in 1, 2 and 4 gang data plates.
_DataGrid inserts must be ordered separately.
_Multiple finishes available.
_Manufacturer: Varilight
