JG Speedfit degree stem ebow push-fit fitting for the connection of two equal sized Speedfit push-fit fittings to create a cross-over type connection. The stem elbow allows a 90° male to female connection making it an ideal coupler for appliances such as cold water storage tanks. Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release.
The JG Speedfit degree stem elbow push-fit fitting is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK.
Instant push-fit connection
Install and demount in seconds without tools
Safe flame-free installation, with no hot works, glue or flux
Grip & Seal collet with stainless steel teeth and main O-Ring seal
Twist & Lock mechanism secures fitting and adds compression
Non-toxic, resists corrosion and no scale build-up
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water and central heating systems
JG Speedfit service valve (chrome plated) for connecting plastic or copper pipe. Using a 1/4 turn screwdriver slot, the valve enables the flow of water to a fixture or appliance to be isolated in the event of an emergency or for maintenance work. It can also be rotated insitu to discourage tampering. Simply push the valve fully onto the pipe. To demount the connection, push the collet towards the body of the push-fit fitting and pull the pipe release.
The JG Speedfit service valve (chrome plated) is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK.
DZR brass body with a chrome plate is ideal for surface mounted pipework
Instant push-fit service valve with 1/4 turn isolation screwdriver slot
Install and demount in seconds without tools
Safe flame-free installation, with no hot works, glue or flux
Grip & Seal collet with stainless steel teeth and main O-Ring seal
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water and central heating systems
JG Speedfit service valve (chrome plated) for connecting plastic or copper pipe. Using a 1/4 turn screwdriver slot, the valve enables the flow of water to a fixture or appliance to be isolated in the event of an emergency or for maintenance work. It can also be rotated insitu to discourage tampering. Simply push the valve fully onto the pipe. To demount the connection, push the collet towards the body of the push-fit fitting and pull the pipe release. The JG Speedfit service valve (chrome plated) is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK. DZR brass body with a chrome plate is ideal for surface mounted pipework Instant push-fit service valve with 1/4 turn isolation screwdriver slot Install and demount in seconds without tools Safe flame-free installation, with no hot works, glue or flux Grip & Seal collet with stainless steel teeth and main O-Ring seal Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe Suitable for hot and cold water and central heating systemsPack of 2
JG Speedfit service valve (chrome plated) for connecting plastic or copper pipe. Using a 1/4 turn screwdriver slot, the valve enables the flow of water to a fixture or appliance to be isolated in the event of an emergency or for maintenance work. It can also be rotated insitu to discourage tampering. Simply push the valve fully onto the pipe. To demount the connection, push the collet towards the body of the push-fit fitting and pull the pipe release. The JG Speedfit service valve (chrome plated) is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK. DZR brass body with a chrome plate is ideal for surface mounted pipework Instant push-fit service valve with 1/4 turn isolation screwdriver slot Install and demount in seconds without tools Safe flame-free installation, with no hot works, glue or flux Grip & Seal collet with stainless steel teeth and main O-Ring seal Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe Suitable for hot and cold water and central heating systemsPack of 5
The McAlpine MAC-7A is a WC (water closet) connector that is designed to connect a toilet pan to a soil pipe with a 4"/110mm outlet. The connector has a 97-107mm inlet, which means that it can fit a range of different toilet pan sizes.
The main feature of the MAC-7A is its 14° angle, which allows for flexibility in the positioning of the toilet pan. This can be useful if the soil pipe is not directly behind the toilet or if there are other obstacles in the way. The angle allows for a smoother and more efficient installation, avoiding any potential clashes with other pipework or obstacles.
The MACFIT technology used in the McAlpine MAC-7A connector makes installation quick and easy. The connector simply pushes into the soil pipe and onto the toilet pan without the need for any tools or additional sealing materials. This helps to save time and effort during installation and ensures a secure and watertight connection.
Overall, the McAlpine MAC-7A is a reliable and easy-to-install WC connector that can provide a flexible solution to many toilet installation scenarios.
・ Outlet fits 4"/110mm inside diameter of PVC-U and cast iron soil pipe
・ 97-107mm Inlet suits all pan spigots
・ Patented 'Lock Ring' inlet seal to give a superior, tighter connection to the WC pan outlet
・ White colour to match sanitaryware
・ Complies with BS 5627:1984
Main Product Description:
The FloPlast Half Round 75mm Gutter Union Grey is a versatile and durable gutter union designed for connecting two lengths of deepflow gutter in a run. It is available in an anthracite grey finish, ensuring it blends seamlessly with various architectural styles and color schemes. The gutter union is designed for easy installation and maintenance, making it suitable for use in residential and commercial projects alike.
Features:
- Designed for use with deepflow gutters
- Clip-in design for ease of installation
- Available in anthracite grey finish
- Suitable for both residential and commercial projects
Benefits:
- Seamless integration into different architectural styles
- Durable construction for long-term performance
- Easy to install and maintain
The ForgeFix Spectre Screws are advanced multipurpose wood screws with double countersunk heads and pozi compatible recess. They have a sawtooth thread design to prevent splitting and reamer to prevent jacking. The screws have a zinc yellow passivated finish for excellent resistance to corrosion. The zinc yellow passivation process of electroplating is similar to the 'galvanised' and 'zinc plated' processes but with the addition of a yellow dye. It offers an aesthetically pleasing finish.Specification: Size: 5.0 x 80mmThread: 48mm lengthPack Quantity: Box of 300
These Forgefix Pozidriv Self-Tapping Screws are zinc plated for increased resistance to corrosion. Their Pan Head, with a flat under head surface makes the screw ideal to lay flat on sheet material of all types, thus reducing deformation. The screws tap their own thread in a pre-drilled pilot hole, in sheet metal. The screws are single threaded to resist pull-out. APPLICATIONIdeal for use in many DIY, ironmongery, engineering, electrical and plumbing applications. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminum and stainless steels by their oxide layers. The Pozidriv screw is similar in appearance to the classic Phillips cross-head, but in fact is very different. The Pozidriv has four additional points of contact, and does not have the rounded corners that the Phillips screw drive has. The biggest advantage it offers is that, when used with the correct tooling in good condition, it does not cam out, allowing great torque to be applied. The Pozidriv screw can easily be distinguished by a line embossed in the screw head at 45° to the slots for the driver.Self Tapping Screw Pozi Pan Head ZP 1 x 10 Box 200
These Forgefix high-low thread Concrete Frame Screws are Zinc Yellow Passivated for increased resistance to corrosion. They offer a virtually stress free fixing, allowing close to edge applications. They are through-fixing, eliminating the need for marking and re-positioning when fixing batons etc. The Torx compatible head of the screw enables increased torque control. APPLICATION: Extremely popular fixing for window and door frames. Also now used as a versatile fixing for many applications in DIY, Joinery, Plumbing and Electrical trades. The Zinc Yellow Passivation process of electroplating is similar to the 'Galvanised' and 'Zinc Plated' processes but with the addition of a yellow dye. It offers an aesthetically pleasing finish, whilst having excellent resistance to corrosion. By design, Torx compatible head screws resist cam-out much better than Phillips or Slotted screws. Where Phillips heads were designed to cause the driver to cam out, to prevent over-tightening, Torx compatible heads were designed to prevent it and to achieve a desired torque consistently. Torx compatible head sizes are described using the capital letter 'T', followed by a number. A smaller number corresponds to a smaller point-to-point dimension of the screw head. Only the proper driver can drive a specific head size without risk of ruining the driver or screw. High-Low Thread screws have an excellent holding power in wood due to their alternating high and low thread heights.Concrete Frame Screw Torx High-Low Thread ZYP 7.5 x 72mm. Bag's of 10 supplied with Bolts only.
The Airmaster Slim Oil Filled Radiator comes with 3 heat settings (500W, 1,000W 2,000W), adjustable room thermostat and easy to set on/off function. Its off white body features a dark grey control panel, 8 fins and 3 oil channels. Sturdy wheels ensure easy movement and the built-in cord storage provides easy storage. Suitable to heat rooms up to 20m³. Specifications: Input Voltage: 220-240V (50Hz).Output Rating: 500W/1,000W/2,000W.Dimensions: 405 x 59 5x 240mm.IP Rating: IP20.Cable Length: 1.7m.
Forgefix TechFast Composite Panels to Steel Hex Screws are used to join composite panels to steel frame buildings. They have a specially designed compression control thread to prevent damage and denting of panels. They are fire and corrosion resistant, protected by Elementech corrosion resistant coating, salt spray tested to 1000 hours. Complies with EU Safety, Health and Environmental requirements. They are supplied with 19mm EPDM rubber washers.These Forgefix TechFast Composite Panels to Steel Hex Screws have the following specification: Size: 5.5 x 185mmInsulation Thickness: 92-150mmPack Size: 50Drill Tip: No.5 No.5 drill tip for self-drilling in heavy gauge steel up to 12.5mm.
These Forgefix Multi-Purpose Pozi Screws with countersunk heads have a zinc finish for increased durability. The screws are immensely popular and versatile, and used in all trades including joinery, electrical and plumbing. Also widely used in DIY applications. APPLICATIONSuitable for use with many materials including PVCu, Timber, Chipboard, MDF, and other similar types. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminium and stainless steels by their oxide layers. The Pozidriv screw is similar in appearance to the classic Phillips cross-head, but in fact is very different. The Pozidriv has four additional points of contact, and does not have the rounded corners that the Phillips screw drive has. The biggest advantage it offers is that, when used with the correct tooling in good condition, it does not cam out, allowing great torque to be applied. The Pozidriv screw can easily be distinguished by a line embossed in the screw head at 45° to the slots for the driver. The countersunk head is designed to sink flush with substrates to leave a smooth surface finish. They have single threads, designed to offer higher pull out values and quicker insertion.Specifications: Size: 4 x 400mm.Box quantity: 200.
The ForgeFix Spectre Screws are advanced multipurpose wood screws with double countersunk heads and pozi compatible recess. They have a sawtooth thread design to prevent splitting and reamer to prevent jacking. The screws have a zinc yellow passivated finish for excellent resistance to corrosion. The zinc yellow passivation process of electroplating is similar to the 'galvanised' and 'zinc plated' processes but with the addition of a yellow dye. It offers an aesthetically pleasing finish.Specification: Size: 4.5 x 60mmThread: 36mm lengthPack Quantity: Box of 100
The ForgeFix Spectre Screws are advanced multipurpose wood screws with double countersunk heads and pozi compatible recess. They have a sawtooth thread design to prevent splitting and reamer to prevent jacking. The screws have a zinc yellow passivated finish for excellent resistance to corrosion. The zinc yellow passivation process of electroplating is similar to the 'galvanised' and 'zinc plated' processes but with the addition of a yellow dye. It offers an aesthetically pleasing finish.Specification: Size: 5.0 x 25mm Thread: Fully threadedPack Quantity: Box of 200
Ideal as an emergency stand-in heater for nurseries, hospitals and retirement homes, this Low Surface Temperature, thermostatically controlled, quiet fan heater provides both a high level of safety and controllability.
1kW rating with on/off switch
Maximum surface temperature of 43�C complies with NHS Estates Health Guidance Notes
Fan only setting for air circulation
Variable thermostat with frost protection setting
Free standing with feet supplied
Tilt switch turns the heater off if it is knocked over
Quiet operation
Mesh grille to prevent objects from being dropped into the heater
Screw lockable control access panel
Automatic safety cut-out
Fitted cable with plug
Finished in white
Kudox Electrical Element Dual Fuel Kit 250WConvert a central heating towel warmer into dual fuel or electric only.Use the enclosed T-piece to install as a dual fuel appliance which can be operated through the central heating in winter or electrically during the summer months.Use the element only to install as stand-alone electric.Electrical SpecificationsPower: 250 WCable length: 1mConnection Type: Hard WiredVoltage - AC 240V (216V-253V) - 50HzElectrical Insulation - Class 1Ingress Protection Rating - IPX5
_Converts a Hydronic Towel Rail or Radiator to Electric Only or Dual Fuel Electric or Central Heating.
_IP55 Rated for IEE Zones 1 & 2
_Fixed temperature built-in thermostat (Cycles On & Off)
_T Piece & Blanking Plug Included
_Fixed temperature built-in thermostat (cycles on and off)
_T piece and blanking plug Included
_Suitable for converting a central heating ladder type towel Warmer into electrical only
Kudox Electrical Element Dual Fuel Kit 150WConvert a central heating towel warmer into dual fuel or electric only.Use the enclosed T-piece to install as a dual fuel appliance which can be operated through the central heating in winter or electrically during the summer months.Use the element only to install as stand-alone electric.Electrical SpecificationsPower: 150 WCable length: 1mConnection Type: Hard WiredVoltage - AC 240V (216V-253V) - 50HzElectrical Insulation - Class 1Ingress Protection Rating - IPX5
_Available in wattage options: 150W, 250W or 400W
_IP rating: IP55
_Suitable for converting a central heating ladder type into electric towel warmer only or electric and central heating (dual-fuel)
_Cable length 1 meter (ready for wiring in the box) rated IP55, 13 A (suitable for bathroom zone 2)
_Manufacturer: Kudox
_Fixed temperature built-in thermostat (cycles on and off)
_T piece and blanking plug Included
_Suitable for converting a central heating ladder type towel Warmer into electrical only
A hardwood four-fold rule with brass hinges and brass end caps.English imperial markings one side and metric markings on the other. Length unfolded: 1000mm (39in).
High quality stainless steel rule, permanently etched and polished to give long lasting clarity and accuracy of measurement. Double sided: English/metric and conversion tablesSubdivided in 1/2mm, mm, 16th, 32nd, 64th.Figured in cm and inches.Size 600mm (24 in).Width 32mm.
The DEWALT DCE079D1G Green Rotary Laser is a fully automatic rotary laser measuring tool, best suited to professional use in work site environments. Green lasers deliver a better working range, in comparison to red lasers, and are easier to see during daytime conditions. Features an automatic horizontal and vertical self-levelling with plumb and a levelling accuracy of ±1.5m@30m. It has a 76m visibility range and a 600m working range, when used with the detector. Includes a manual single slope mode (±10 °) and a scan mode in X and Y axis. The laser incorporates a heavy-duty rubber housing, that is IP67 rated against dust and splash. It has also been drop tested, up to 1 metre. Supplied with the following: 1 x Green Laser Detector, 1 x Green Laser Target Card, 1 x Green Laser Glasses, 1 x 18 Volt 2.0Ah Li-Ion Battery, 1 x 10.8, 14 & 18 Volt DCB107 XR Li-Ion Charger and 1 x DWST1-71195 TSTAK™ Deep Toolbox. Can be powered by 18 Volt XR or 54 Volt FlexVolt Batteries. Specification Accuracy: ±1.5mm.Self-Levelling: 8º.Working Range: 76m.Detector Range: 600m.Rotation Speed: 0-300/600-1,000/min. Laser Type: GREEN.
ROCOL MOISTURE GUARD Spray is a thin corrosion preventative film suitable for the temporary protection of components. The flexible film does not chip or crack, does not attract dirt or dust, and protects against condensation attack.1 x ROCOL MOISTURE GUARD Green Spray 400ml
Main Product Description:
The FloPlast 110mm Soil 135' Double Socket Bend is a versatile plumbing component designed to provide a 135-degree change in direction for 110mm Soil Pipe Systems. Its push-fit design ensures a secure connection to a 110mm Ring Seal Soil System, enabling efficient waste water drainage and foul discharge from appliances. The bend features a socket fitting at each end, making it suitable for use in both horizontal and vertical planes.
Additional Features and Benefits:
- High-quality PVC-U material for durability and strength
- Lightweight and easy to install
- Compatibility with most existing materials and systems
- Resistance to high temperatures
- Innovative push-fit joint system for seamless connections
- Color-coordinated with other FloPlast Soil & Waste Systems
- Complies with relevant British/European standards
Main Product Description:
The FloPlast 110mm Soil 112.5' Socket/Spigot Bend Grey is a versatile plumbing fitting designed to change the direction of a PVC soil pipe. This fitting can be used in both horizontal and vertical planes, making it suitable for various plumbing applications.
Features:
- Made of durable PVC material
- Designed for use with PVC soil pipes
- Can be used in both horizontal and vertical planes
- Available in grey color
Benefits:
- Allows for easy direction changes in plumbing systems
- Enhances the functionality of PVC soil pipes
- Suitable for a wide range of plumbing applications
- Provides a reliable and long-lasting solution for plumbing needs.
Main Product Description:
The FloPlast 110mm Soil Boss Pipe Spigot is a versatile plumbing component designed for use in soil systems. It features a black finish and is part of a 110mm Ring Seal Soil System, allowing for the addition of multiple waste connections. With dimensions of 244mm in length and 151mm in width, this PVC-U material component adheres to various standards including BS 4514, BS EN 1329-1:2000, and holds the Kitemark No. KM 544331.
Additional Features and Benefits:
- Designed for use in soil systems, allowing for the addition of multiple waste connections
- Made of PVC-U material, ensuring durability and resistance to environmental factors
- Available in black and grey colors, providing flexibility in aesthetic choices
- Meets various standards including BS 4514, BS EN 1329-1:2000, and carries the Kitemark No. KM 544331
- Can add up to 3 waste connections, making it suitable for larger systems
Main Product Description:
The FloPlast 50mm Round Downpipe Bracket Grey is a practical and easy-to-install component designed to secure 50mm downpipe lengths and fittings to a wall and support joints. It is suitable for use with MiniFlo gutter systems via a 50mm outlet fitting, making it a cost-effective solution for smaller installations like sheds, garages, and conservatories. This downpipe clip adheres to BS EN 12200-1 standards and offers a simple push-fit connection for quick installation.
Key Features:
- Traditional round profile
- Practical and easy to install
- Simple push-fit connection
- Connects to MiniFlo guttering
- Manufactured to BS EN 12200-1 standards
Benefits:
- Suitable for various applications, including sheds, garages, and conservatories
- Enhances the appearance of the property with its high gloss finish and blemish-free surface
- Low maintenance due to its tough and durable nature
- Weather-resistant, ensuring colorfastness and all-around protection against harsh elements
- Seamlessly matches architectural styles, both new and old
- Provides a comprehensive range of systems, colors, and fittings to cater to different installation needs
- Compatible with larger fittings, ensuring protection during transportation
- Offers a cost-effective solution for rainwater collection and drainage
Product Description:
The FloPlast 110mm Soil Access Socket/Solvent Weld Black is a versatile component of the FloPlast "Cast Iron" Style Soil Systems, offering the authentic appearance of cast iron while benefiting from the advantages of PVC. This access socket is designed for use in domestic properties, typically positioned at the base of the soil pipe where it connects to the drainage system. Its ring seal push-fit socket allows for quick and easy installation, while its standard spigot end matches the dimensions of a 110mm pipe, enabling seamless integration with other components in the system. The cast iron effect finish replicates traditional metal products with low maintenance demands, making it a popular choice for those seeking an aesthetically pleasing solution without compromising on performance.
Key Features:
"Cast Iron" Style Design: Replicates the authentic appearance of cast iron, adding a touch of classic elegance to your property.
Versatile Use: Designed for domestic properties, specifically positioned at the base of the soil pipe for seamless integration with the drainage system.
Ring Seal Push-Fit Socket: Enables quick and easy installation, ensuring a secure and leak-free connection in your soil system.
Standard Spigot End: Matches the dimensions of a 110mm pipe, allowing for seamless integration with other components in the FloPlast "Cast Iron" Style Soil Systems.
Low Maintenance: The cast iron effect finish provides the look of traditional metal products with minimal maintenance demands, ensuring long-lasting aesthetics.
Durable PVC Construction: Benefits from the durability and reliability of PVC, offering longevity and resistance to the elements.
Upgrade your soil drainage system with the FloPlast 110mm Soil Access Socket/Solvent Weld Black – a perfect combination of classic aesthetics and modern functionality for your property.
Main Product Description:
FloPlast Underground Drain 110mm 87.5' Rest Bend - A self-supporting, long-radius, double-socketed rest bend designed for connecting soil stacks to underground drainage systems, featuring a 10-year manufacturer guarantee and compliant with BS EN 1401-1 standards.
Features:
- Self-supporting design with a moulded plastic foot, eliminating the need for traditional half bricks to support the bend.
- Longer radius than standard 87.5 or 88 degree bends to minimize blockages.
- Double-socketed end with 110mm ring seal sockets for secure connections.
- Terracotta color for easy identification during installation and maintenance.
- Suitable for high temperature waste discharge.
- Lightweight and easy to work with.
Benefits:
- Improved flow and reduced risk of blockages due to its longer radius.
- Easy and secure connection with 110mm ring seal sockets.
- Durability and strength provided by PVC-U material.
- Compatibility with a wide range of 110mm underground drainage pipes, couplings, and fittings.
The Moore and Wright Digital Height Pre-Setter features a 2.5mm travel and automatically turns on when the surface is moved. Simple2 button design (On/Off and Set / mm/inch).IP65 rated.Powered by a CR2023 battery.
Norbar HT3 Torque Multiplier with a 5:1 torque multiplication, and accuracy guaranteed to better than ±4%. It comes with two reaction bar styles to offer maximum versatility. It has a robust construction that allows for minimal maintenance, whilst maximising working life. Supplied in a carrying case, it is ideal for inclusion in the heavy vehicle tool kit. The 1300 Nm version has a spare 3/4in output square included in the kit.Norbar HT3 Torque Multiplier Specification Range: 130-1,300Nm (96-960 lbf.ft/13-130 kgf.m).Multiplication Ratio: 5:1.Velocity Ratio: 5.333:1.Output Square: 3/4in.Input Square: 1/2in.Plate Weight: 1.3kg.Tool Weight: 3.8kg.
The NorTorque® utilises Norbar’s proven mechanism and internal components, and incorporates them into a purposeful and attractive torque wrench that will delight a wide range of users, from professional mechanics to hobby enthusiasts. The wrench offers a comfortable, robust single material handle which also contains an easy to set scale. Fine engineering ensures that the wrench adjustment is both fast and fingertip light meaning that you can do your job more efficiently. The sleek body tube finish was chosen for its robustness and minimal process impact on the environment.This Norbar NorTorque® Adjustable Dual Scale Ratchet Torque Wrench has the following specification: Drive: 1/2inAccuracy: ±3%Range: 60-340Nm (45-220 lb.ft)Ratchet Diameter: 52mmRatchet Teeth: 60Length: 679mmWeight: 1.55kg
Flexovit Delta hook & loop sanding sheets; tough and sharp high performance aluminium oxide, combined with a heavy paper backing makes this product extremely durable, long lasting and suitable for use on a variety of surfaces. Fits most brands of Delta sanders, the hook & loop backing allows quick and easy sheet changing and the perforated holes allow free and easy dust extraction. Suitable for use on: wood, paint and metal. Size: Delta Shape, 94mm.Packed in 15s (25 For Assorted 5 x Coarse, 10 x Medium and 10 Fine)
The Moore & Wright Spring Dividers are manufactured from polished tool steel and the points are hardened to over 550Hv. The bow spring ensures uniform tension over working range and they are fitted with a centrally mounted adjustment screw. These Spring Dividers comply with BS3123 standards. Note: The nominal size is the distance between the centre of the roller and the working ends of the legs.The Moore & Wright 506 Spring Dividers have the following specifications: Size: 150mm (6in).
The Dimplex ECOT range of thermostatic tubular heaters is ideal for applications which require safe, low-wattage background heating for localised frost protection or as window de-misters.
The Metabo PowerMaxx BS BL Q Drill/Screwdriver has a compact lightweight design, making it ideal for a wide variety of applications. Utilises the Metabo Quick System for quick-change of bit retainer and bits, provides flexible working. Its push-in battery packs are extremely compact and handy. There is also a practical capacity display for checking the charge status. The belt hook can be fixed either on the right or left side without tools. Supplied with: 1 x Quick-Change Drill Chuck 10mm, 1 x Quick-Change Angle Adaptor, 2 x 12V 2.0Ah Li-Power Push-in Batteries, 1 x LC 40 Charger, 1 x Belt Hook and 1 x Plastic Carry Case. Specification: Chuck Capacity: 1-10mmNo Load Speed: 0-400/0-1,500/min.Max. Torque: Soft 20Nm, Hard 38NmDrill Capacity: Steel 10mm, Wood 32mmWeight: 0.7kg (without battery), 0.9kg (with battery)
