These Forgefix Cavity Wall Anchors are a specialist plasterboard fixing with Pozi and slotted combination drive insert. They have an all-metal construction for applications which require heat resistance and are Zinc Plated for increased resistance to corrosion. The anchors have anti-rotation teeth, which pierce the base plasterboard skin to ensure firm anchorage. APPLICATION:All metal construction means the anchors are suitable for the heavier duty tasks such as fixing radiators and wall units. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminum and stainless steels by their oxide layers.Cavity Wall Anchor ZP M5 x 37 Bag 10
These Forgefix round coaxial cable clips have hardened masonry nails for increased efficiency, and which will fix into timber, block work and mortar.They are specifically designed for and will suit most TV and Satellite installations. Size: 6-7mm.Cable Clip Round Coax Black 6-7mm Box 100
These Forgefix high-low thread Concrete Frame Screws are Zinc Yellow Passivated for increased resistance to corrosion. They offer a virtually stress free fixing, allowing close to edge applications. They are through-fixing, eliminating the need for marking and re-positioning when fixing batons etc. The Torx compatible head of the screw enables increased torque control. APPLICATION: Extremely popular fixing for window and door frames. Also now used as a versatile fixing for many applications in DIY, Joinery, Plumbing and Electrical trades. The Zinc Yellow Passivation process of electroplating is similar to the 'Galvanised' and 'Zinc Plated' processes but with the addition of a yellow dye. It offers an aesthetically pleasing finish, whilst having excellent resistance to corrosion. By design, Torx compatible head screws resist cam-out much better than Phillips or Slotted screws. Where Phillips heads were designed to cause the driver to cam out, to prevent over-tightening, Torx compatible heads were designed to prevent it and to achieve a desired torque consistently. Torx compatible head sizes are described using the capital letter 'T', followed by a number. A smaller number corresponds to a smaller point-to-point dimension of the screw head. Only the proper driver can drive a specific head size without risk of ruining the driver or screw. High-Low Thread screws have an excellent holding power in wood due to their alternating high and low thread heights.Concrete Frame Screw Torx High-Low Thread ZYP 7.5 x 122mm Bag 10
The DEWALT reciprocating bi-metal construction blades combine HCS and HSS for increased flexibility, durability and have been designed for use with cordless machines. The universal shank fits all major brands including DEWALT, Bosch, Hitachi, Flex, Makita, Metabo and Skil and these blades are ideal for fast cutting of metals, wood and plastics.The DEWALT DEWDT2344QZ reciprocating blades are ideal for fine, fast cuts, especially for curve cutting in wood and plastic.
The Energizer® CR2032 is the most popular 3V Lithium coin cell from Energizer. It is 20mm in diameter, 3.2mm thick, weighs 3.1g and has a capacity of 220.0mAh - 240.0mAh. For use in calculators, pagers, watches and car key alarms. Replaces: 2032, BR2032, CR2032, DL2032, EA2032C, ECR2032, L14, L2032, LF1/2V, SB-T15.1 x Energizer® CR2032 Coin Lithium Battery
These Forgefix Cavity Wall Anchors are a specialist plasterboard fixing with Pozi and slotted combination drive insert. They have an all-metal construction for applications which require heat resistance and are Zinc Plated for increased resistance to corrosion. The anchors have anti-rotation teeth, which pierce the base plasterboard skin to ensure firm anchorage. APPLICATION:All metal construction means the anchors are suitable for the heavier duty tasks such as fixing radiators and wall units. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminum and stainless steels by their oxide layers.Cavity Wall Anchor ZP M5 x 52 Bag 10
These Faithfull Coping Saw Blades are manufactured from high quality steel for strength and durability. The teeth configuration on coping saw blades is specifically designed to ensure smooth and fast cutting especially when making turns to follow contours, and cutting shapes. For use with Faithfull (FAICS) Coping Saw.The Faithfull FAICSB coping saw blades have the following specifications: Application: Metal cutting. Length of blade: 165mm (6 1/2 inch). 14 tpi.
The Hultafors HVK Craftsman's Knife is made from Japanese knife steel and has been developed and adapted for the craftsman. The unique attachment method of the sheath around a button on work clothes means that it does not loosen, but is easy to remove. The 2.5mm carbon steel blade has been hardened to 58-60 HRC with the cutting edge sharpened in several stages with a final honing on a leather strop. The handle and sheath are made of extra durable PP plastic, if your belt is thick, cut away the small pin on the cover. Blade Length: 93mm.Overall Length: 208mm.
The Arctic Hayes DT1 Radiator Drain Tray Kit is simple and easy-to-use with step by step detailed instructions included. With universal application for 8, 10, 15 and 22mm pipe work. Helps to avoid unnecessary mess and damage to floors to carpets. Perfect for professional use or DIY. Contains the following: Perfect for professional use or DIY. Contains the following: 1 x Draining Tray4 x Water Diverting Collars4 x Reusable Sealing Straps1 x Water-resistant Barrier Gel (sufficient for 6 - 8 applications)
These Faithfull Drywall Screwdriver Adaptors are suitable for use in hand-held drivers or power drills for driving screws into drywall. The 1/4 inch shank adaptor features a pre-set recessed collar and fitted PH2 bits, ready for use in all drywall applications.
CarPlan Demon Shot helps boost your screenwash. Add super concentrated Demon Shot to your washer bottle to improve the freezing point protection. Great for unexpected winter conditions. 500ml makes up to 25 litres of screenwash.
The Faithfull Circlip Pliers are manufactured from chrome vanadium steel and are designed to appeal to both tradesmen and professional users. Exactly defined pins ensure that the ring will always fit securely. Bent nose version for compressing and fitting internal circlips. Bore Size: 6-30mm.
The DEWALT DCE088D1G Self-Levelling Green Cross Line Laser projects bright crossing horizontal and vertical lines. It has a variable blink sequence for manual mode and a full-time pulse mode, for use with detector whilst maintaining full brightness for visibility. The laser is fitted with a locking pendulum to help prevent damage to internal components. The integrated magnetic, pivoting base has a 1/4in thread. IP65 rated, against projected water and dust damage. Supplied with: 1 x 10.8 Volt 2.0Ah Li-Ion Battery.1 x Charger.1 x Kitbox. Specification Laser Class: 2, Level Accuracy: ±3mm@10m.Self-Levelling Range: 4°.Visibility Outdoor/Indoor: 30m (60m with detector).Thread: 1/4in.
The DEWALT DCD996 XR Brushless Combi Drill has a tough three speed all metal transmission for increased run time and longer tool life. It features an improved automatic high speed for increasing the users masonry drilling speed. The electronic clutch has an 11 position adjustable torque control for optimised precision when screwdriving. The hammer drill driver has a 13mm ratcheting keyless chuck with automatic spindle lock for fast bit changes, and an efficient intelligent trigger allowing total control over all applications. With an improved 3 position LED torch with high/medium/low settings. The high output provides a 20 minute LED delay for lighting dark work spaces. The grip design provides greater application control and maximum comfort. DCD996P2: 2 x 18 Volt 5.0Ah Li-Ion Batteries.DCD996P2B: 2 x 18 Volt 5.0Ah Bluetooth Li-Ion Batteries.DCD996X1: 1 x 18/54 Volt 9.0/3.0Ah FlexVolt Li-Ion Battery. Specification Chuck: 13mm KeylessNo Load Speed: 0-450/0-1,300/0-2,000/min.Impact Rate: 0-8,600/0-25,500/0-38,250/bpmMax. Torque: 95Nm, 11 SettingsCapacity: Wood: 55mm, Steel: 15mm, Masonry: 16mmWeight: 2.1kgThe DEWALT DCD996P2 XR Brushless Combi Drill is supplied with the following: 2 x 18 Volt 5.0Ah Li-Ion Batteries.1 x Multi-Voltage XR Charger.1 x Belt Hook.1 x Magnetic Bit Holder.1 x Multi Position Side Handle.1 x TSTAK Heavy-Duty Kit Box.
These Forgefix Phillips, single thread Drywall Screws have a black phosphate finish for increased durability. The screws come complete with a Phillips No.2 insert bit. Their Bugle Head allows the screw to sink effortlessly into the dry lining without the need for countersinking, which in turn minimises the damage to the surface. APPLICATION:Designed for fitting dry linings to studding. Phosphate coatings are made up of thin crystalline layers of phosphate compounds that adhere to the surface of the fixing or fastener. The phosphate crystals are porous and can be formed from zinc, manganese, or iron phosphate solutions. Phosphate coatings offer good corrosion resistance and have an excellent ability to absorb supplementary coatings which improves appearance, corrosion resistance and resistance to abrasion. The Phillips screw has four simple tapered slots. It is designed so that a Phillips tip screwdriver can turn a Phillips screw with increasing torque. When the torque gets to be too strong for the tip then the screwdriver tip winds itself out of the screw thus preventing over-tightening and or damage to the screw head. Coarse thread screws (mainly drywall screws) have an extremely sharp point and are designed to penetrate plasterboard skin. The coarse thread eases in to the board then the timber baton holding the board firm.Drywall Screw Phillips Bugle Head SCT Black Phosphate 3.5 x 42mm Bulk 1000
Depressed Centre Metal Grinding Discs are manufactured using Aluminium Oxide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Use in stock removal applications on ferrous and non-ferrous metal. By presenting the disc to the workpiece at an angle of 45º, the most efficient results are achieved. For use with a variety of machines, mini-grinders to stationary cutting-off machines. Manufactured to EN 12413 standard. It is important to choose between a metal or stone cutting disc according to the material being cut, and to ensure that the correct wheel is properly mounted. SAFETY TIPS Read the manufacturer's instructions carefully Wear goggles to guard against flying chips or dust Inspect the condition of the wheel frequently Adjust the guard to deflect sparks and dust Maintain the revs and let the wheel do the work1 x Faithfull Depressed Centre Metal Grinding Disc 115 x 6.5 x 22.23mm
The proper tool for driving hardened nails and cold chisels.One-piece steel hammer with Estwing's world famous blue shock reduction nylon vinyl grip.Weight: 1810g (4lb).
Ronseal Yacht Varnish is a professional high quality solvent-based varnish that provides superior, long lasting protection for exterior wood. The weatherproofing formula protects the wood from damaging UV rays, it contains a flexible resin that allows the varnish to move with the wood as it expands and contracts,so helping to prevent cracking, peeling and blistering. This unique formula is also highly water repellent to keep your wood drier. Areas of use: Exterior:Approx coverage: 16 m2 covered per litre.Approx number of coats: 3.Application: Brush.Drying time Approx: 6 hours.Protection level: High.Available in Satin or Gloss Finish with different size tins available.The Ronseal RSLYVS25L has a Satin finish and is supplied in a re-sealable Tin.2.5 Litre
The Faithfull combined feather edge and straight edge is made from extruded mill finished aluminium which is exceptionally light and manoeuvrable. Manufactured with one edge tapered and one flat edge. It can also be used as a straight edge for ruling and cutting. The models featuring the scale along the length are graduated in metric at 5 mm intervals and numbered every 50 mm. The ‘FE6FE’ has one edge sharply tapered and one flat edge.Size 1200mm (4 ft)Section: 93 x 25mm (3 5/8 x 1 in)
The PlastiKote Fast Dry Enamel Aerosol is a superior quality paint and comes in a handy 100ml spray that is ideal for small project or craft uses. Fast Dry Enamel is non-fading, long-lasting paint which is safe to use on children's toys and furniture. Suitable for use on cardboard, ceramic, glass, metal, paper, plastic and wood. Available in 37 superb colours, please note that the cap is not a true representation of the finish.Colour: Black.Finish. Matt.
These Forgefix Phillips, single thread Drywall Screws have a black phosphate finish for increased durability. The screws come complete with a Phillips No.2 insert bit. Their Bugle Head allows the screw to sink effortlessly into the dry lining without the need for countersinking, which in turn minimises the damage to the surface. APPLICATION:Designed for fitting dry linings to studding. Phosphate coatings are made up of thin crystalline layers of phosphate compounds that adhere to the surface of the fixing or fastener. The phosphate crystals are porous and can be formed from zinc, manganese, or iron phosphate solutions. Phosphate coatings offer good corrosion resistance and have an excellent ability to absorb supplementary coatings which improves appearance, corrosion resistance and resistance to abrasion. The Phillips screw has four simple tapered slots. It is designed so that a Phillips tip screwdriver can turn a Phillips screw with increasing torque. When the torque gets to be too strong for the tip then the screwdriver tip winds itself out of the screw thus preventing over-tightening and or damage to the screw head. Coarse thread screws (mainly drywall screws) have an extremely sharp point and are designed to penetrate plasterboard skin. The coarse thread eases in to the board then the timber baton holding the board firm.Drywall Screw Phillips Bugle Head SCT Black Phosphate 3.5 x 38mm Box 200
Sadolin Extra Durable Woodstain is suitable for all softwood and hardwood apart from decking or areas subject to heavy wear/abrasion. It is particularly suitable for joinery such as doors and windows, where its flexible nature and water repellency provide long-lasting protection. For optimum durability on new wood, the use of Sadolin Classic as a base coat is recommended, particularly when treating hardwoods. Specification: Coverage: Planed Softwood/Hardwood up to 15m²/litreDrying Time: Touch Dry 4-6 hours; Recoat: 16-24 hoursThis Sadolin Extra Durable Woodstain has the following specification: Colour: RedwoodSize: 1 Litre
These Forgefix Phillips, single thread Drywall Screws have a black phosphate finish for increased durability. The screws come complete with a Phillips No.2 insert bit. Their Bugle Head allows the screw to sink effortlessly into the dry lining without the need for countersinking, which in turn minimises the damage to the surface. APPLICATION:Designed for fitting dry linings to studding. Phosphate coatings are made up of thin crystalline layers of phosphate compounds that adhere to the surface of the fixing or fastener. The phosphate crystals are porous and can be formed from zinc, manganese, or iron phosphate solutions. Phosphate coatings offer good corrosion resistance and have an excellent ability to absorb supplementary coatings which improves appearance, corrosion resistance and resistance to abrasion. The Phillips screw has four simple tapered slots. It is designed so that a Phillips tip screwdriver can turn a Phillips screw with increasing torque. When the torque gets to be too strong for the tip then the screwdriver tip winds itself out of the screw thus preventing over-tightening and or damage to the screw head. Coarse thread screws (mainly drywall screws) have an extremely sharp point and are designed to penetrate plasterboard skin. The coarse thread eases in to the board then the timber baton holding the board firm.Drywall Screw Phillips Bugle Head SCT Black Phosphate 3.5 x 32mm Bulk 1000
These Forgefix Flat Penny washers, have a 25mm outside diameter. The washers are bright zinc plated for increased corrosion resistance, and have been given the name 'Penny Washer' due to their similarity in size to an old penny. Washers provide a smooth surface for the nut or bolt to bear on, making it less likely to loosen as a result of an uneven fastening surface. The main purpose of a washer is to distribute the load under a bolt head or the nut face. APPLICATION:On all manner of bolting applications. Can be used with all types of bolts and nuts. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminum and stainless steels by their oxide layers.Flat Penny Washer ZP M8 x 25mm Bag 10
These Forgefix heavy-duty Form A Flat Washers are thicker than the more popular Form B type washers. They are bright Zinc Plated for increased corrosion resistance and conform to DIN 125 standards. Washers provide a smooth surface for the nut or bolt to bear on, making it less likely to loosen as a result of an uneven fastening surface. The main purpose of a washer is to distribute the load under a bolt head or the nut face. APPLICATION:On all manner of bolting applications. Can be used with all types of bolts and nuts. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminum and stainless steels by their oxide layers.Flat Washer Heavy-Duty ZP M8 Box 10
Fill and Fix Expanding Foam is a quick setting one part polyurethane foam in aerosol form. The Fill and Fix version is supplied with attachable nozzles and Gun Grade is supplied for use with our range of applicator guns. The foam expands on application to up to 50 times its original volume and expands on application by 150%. Once cured, the foam can be cut, sawn or plastered over after only an hour providing the working temperatures (can and surfaces) are between +5 to +25° C, ideally 20° C. BENEFITS- Quick setting - can be cut, sawn or plastered in 1 hour- Economical in use - expands up to 50 times its original volume- Fills irregular and broad gaps where most conventional fillers would fail- Possesses insulating and sound deadening properties. AREAS OF USE Filling- gaps around pipe entries through walls- gaps around window and door frames- electrical wire chasing prior to plastering- deep joints prior to applying sealant or plaster- irregular gaps in stone, brick, concrete or plaster Fixing- door frames- timber structures- window sills and thresholds- Window frames Insulating- behind cladding to exterior walls- behind sofit and barge boards- in automotive applicationsSize - 750ml
These Forgefix Form B Flat Washers are Zinc Plated for increased resistance to corrosion. Washers provide a smooth surface for the nut or bolt to bear on, making it less likely to loosen as a result of an uneven fastening surface. The main purpose of a washer is to distribute the load under a bolt head or the nut face. APPLICATION:On all manner of bolting applications. Can be used with all types of bolts and nuts. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminum and stainless steels by their oxide layers.Flat Washer Form B ZP M6 Bag 100
The DEWALT Flat Wood Drill Bit is made from high quality chrome vanadium steel with a ground central point and cutting edges for accurate location and clean cutting. They also have a ground chip breaker to reduce splintering providing relatively clean holes and improved drilling efficiency. Ideal for rapid drilling of holes in wood. Suitable for natural hard and soft wood, chipboard and other man made materials.1 x DEWALT Flat Wood Drill Bit 16 x 160mm
These ForgeFix ForgeFast Wood Screws have a universally accepted, Pozi compatible drive. They have 6 underhead lobes for improved countersinking and reduced surface dust, and reinforced countersunk necks which improve holding power. The screws have an anti-friction thread for reduced splitting of the timber, reduced 'jacking' and spinning of joined timber and improved drawing strength. The thread is serrated for improved pull-out and reduced torque when inserting the screw. The double cutting point allows faster drilling time and reduced clogging of wood dust and is capable of piercing 0.8mm steel. The screws have a 'Elementech 400' coating providing an anti-corrosive metal finish, which lasts up to 6 times longer than standard zinc coatings. The coating is environmentally friendly and does not contain Cr6+. It is Salt Spray tested to 400 hours. The screws are suitable for interior use.Size: 3.5 x 25mm.Box quantity: 200.
These Forgefix Flat Repair Washers have a large 40mm outside diameter. They are bright Zinc Plated for increased corrosion resistance. Washers provide a smooth surface for the nut or bolt to bear on, making it less likely to loosen as a result of an uneven fastening surface. The main purpose of a washer is to distribute the load under a bolt head or the nut face. APPLICATION:On all manner of bolting applications. Can be used with all types of bolts and nuts. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminum and stainless steels by their oxide layers.Flat Repair Washers ZP M12 x 40mm Bag 10
The Faithfull compact folding Star key set in a soft grip non-slip storage case, designed to avoid the inconvenience of lost keys. All keys are manufactured from fully hardened chrome vanadium steel and are compatible with Torx® head fixings. 8 Piece Set (Star Keys) T9, T10, T15, T20, T25, T27, T30, T40
These Forgefix General Purpose Pozidrive Screws with Countersunk heads are zinc plated for increased durability. They are an extremely popular general purpose screw, and suitable for use in and with many materials. APPLICATION:Ideal for use in many ironmongery, electrical and plumbing applications.Can be used with various screw cover caps. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminium and stainless steels by their oxide layers. The Pozidriv screw is similar in appearance to the classic Phillips cross-head, but in fact is very different. The Pozidriv has four additional points of contact, and does not have the rounded corners that the Phillips screw drive has. The biggest advantage it offers is that, when used with the correct tooling in good condition, it does not cam out, allowing great torque to be applied. The Pozidriv screw can easily be distinguished by a line embossed in the screw head at 45° to the slots for the driver. The countersunk head is designed to sink flush with substrates to leave a smooth surface finish. They have twin threads, which enable an easy start when driving. Imperial Size > MetricNo.4 = 3.0mm, No.6 = 3.5mm, No.7 = 3.9mmNo.8= 4.0mm, No.10 = 5.0mm, No.12 = 6.0mmGeneral Purpose Pozi Screw Countersunk TT ZP 1/2 x 6 Box 200
These ForgeFix ForgeFast Wood Screws have a universally accepted, Pozi compatible drive. They have 6 underhead lobes for improved countersinking and reduced surface dust, and reinforced countersunk necks which improve holding power. The screws have an anti-friction thread for reduced splitting of the timber, reduced 'jacking' and spinning of joined timber and improved drawing strength. The thread is serrated for improved pull-out and reduced torque when inserting the screw. The double cutting point allows faster drilling time and reduced clogging of wood dust and is capable of piercing 0.8mm steel. The screws have a 'Elementech 400' coating providing an anti-corrosive metal finish, which lasts up to 6 times longer than standard zinc coatings. The coating is environmentally friendly and does not contain Cr6+. It is Salt Spray tested to 400 hours. The screws are suitable for interior use.Size: 4.0 x 60mm.Box quantity: 100.
