Monument Mono Tap Back Nut Spanner Grip + Set is a set of 3 double ended tap back nut box spanners for quick assembly of tap back nuts on basins. Supplied with T-bar. The set comprises the following sizes: 8 x 10, 9 x 11 and 12 x 13mm.
The Kuny's AP-622a Carpenter's apron is made from durable split grain leather with contrasting black stitching, rivets and hammer holders. It has carry handles to allow easy handling/storage and a 2in wide heavy nylon belt with double rivets at all stress points. - 5 Reversed nail pockets for easy access. - 2 Large and 3 Small. - Deep centre pocket for tape etc.- 2 Heavy Steel Hammer Holders. - 6 Utility pockets for pencils, markers etc.
These Facom 12-point OGV sockets have a 3/8 inch drive to fit 3/8 inch ratchets. The sockets are long-reach, and their OGV profile allows tightening torque to be applied to the sides, rather than to the angles of the nut/bolt. They are an excellent choice for tightening/loosening harder to reach nuts, bolts and other fasteners. Available in a range of different metric sizes. Performance: conform to ISO 2725-1, DIN 3124 and NF ISO 2725-1.The FCMJ16LA Deep Socket has the following specifications:Socket size: 16.0mm.Length: 60mm.
The DEWALT Apprentice Hiker Boots have nubuck and full grain leather uppers which are hard-wearing with antibacterial insole with dual density seat. They are fitted with a steel toecap that has been tested to 200 joules. The sole is chemical and oil resistant and is made from EVA rubber. Available in Wheat or Brown. EN Test: CE EN ISO 20345-2011.Safety Rating: SB.Slip Rating: SRA.The DEWALT Apprentice Nubuck Hiker Boots have the following specification: Colour: Wheat.Size: UK 10 Euro 44.
This Teng Tools Industrial wrench is made of chrome vanadium steel for increased strength and durability. It exceeds international standards ISO 6787-1976, ASME B.107.8M-1996, BS6333-1995, DIN 3117-1988 and JIS B4604-1976. Graduated markings on the jaw allow the size of the fastening to be accurately measured and the wrench to be set at the right size. The 15 degree jaw angle allows the wrench to be used in narrow spaces as only 30 degrees turning is needed. The wider jaw opening increases the range of bolt sizes to be worked on. It is non-protruding on the moveable jaw end, which gives better action when space is limited. The handle provides a comfortable hand fit.The TEN4007 Adjustable Wrench has the following specifications: Length: 450mm (18 inch). Capacity: 50mm. Capacity AF: 2.3/8 inch.
Faithfull Hose Clips are ideal for fixing flexible rubber hoses, plastic hoses and flexible pipes and can be used around the home, in the garden, workshop or the garage, in most applications where a water or air tight seal is required. The non-perforated worm drive used on these hose clips provides a high thread strength with a smooth running, snag-free winding surface. A hex shaped drive nut allows the use of either a slotted screwdriver, spanner, nutdriver or hose clip driver* when tightening or loosening the clips. Standard range hose clips are manufactured from mild steel and are zinc plated to aid corrosion resistance and are available in a wide variety of sizes. * The Faithfull Flexi-drive hose clip driver (product code: FAISDHOSE) is perfect for fitting and removing hose clips. The driver features a full sized, soft-grip, non-slip handle and a flexible drive shaft that allows easy access when removing or fitting hose clips in difficult to reach or offset positions. Screw head size: 7mm.Size: 7.5.Adjustment: 158 - 190mm.
Soldering Flux acts as a chemical cleaning agent to remove impurities from joint surfaces when soldering, ensuring a better joint. It has a non-acidic, non-toxic formula, offering fitters the benefits of savings, safety and certainty. WRAS (The Water Regulations Advisory Scheme) approved. Products compliant with this approval are accepted by all water suppliers in the UK.1 x LA-CO Regular Soldering Flux, Size: 125g
The Monument OMAT® Soldering Mat is a patented cut out mat for soldering copper pipes from 15-22mm in diameter. It reduces the risk of fire, and its unique shape with overlap gives a tight and secure fit. Unlike conventional soldering mats the OMAT® wraps around the pipe offering complete protection to the surrounding surfaces. The OMAT® is constructed from a woven glass fabric and does not present any of the hazards associated with asbestos materials. Additionally, it is stitched all around and will resist temperatures up to 600°C.The Monument 2363L OMAT® Soldering Mat has the following specifications: Size: 150mm² (6in²).Pipe Capacity: 15-22mm.
Ronseal 10 Year Woodstain offers the best protection against the weather, leaving your wood looking great for 10 years. You don't need to use any base coats or primers. It won't flake or peel. BBA approved.Suitable for all smooth planed exterior wood. Not suitable for decking. Specification: Drying Time: 1 hourCoverage: 18m²/LThis Ronseal 10 Year Woodstain has the following specification: Colour: Dark OakSize: 250mlDrying Time: 1 hourCoverage: 18m²/L
Stick Nails for use with the Stanley Bostitch Wire Weld Framing Nailers, the traditional wire weld collation gives the stick nails more rigidity and resistance to damp environments. 28° Collation Angle Designed for the construction market, where it is important to find the right combination of tool weight and working autonomy. Since sticks contain fewer nails than coiled nails (approx 25) and less of them are loaded into the nailer, the tool is lighter. A simpler feed mechanism for stick nails also helps to keep the weight of the tools lower than for coil nailers for similar size nails. This is important when you are working up a ladder with your arm stretched out. (Remember only tools fitted with sequential trip should be used when working up a ladder). Smooth shank nails have exactly that: a smooth appearance. Due to their regular form they can be produced at very high speed and are therefore the most economical type of nail. However, their holding power is the lower than ring shank nails. They require less energy to drive them and the air consumption per nail can be lower. Sometimes it is possible to use a smaller tool to drive them. Ring shank nails have a series of rings punched into the surface of the shank. Again a difference in the diameter of the shank is produced making it even more difficult to withdraw the nail. Ring shank nails have to be produced at lower speeds and their cost is generally higher than for a smooth shank nail. The air consumption per nail is also higher, and the energy required to drive these nails into hard wood is very much greater. Bright finish is without any form of protection and is the most economical choice, but the nails will start to rust before nails that have a protective treatment. Used in applications where no protection is required, for example a one way disposal pallet. As all standard nails come with this finish. Galvanising , or coating with Zinc, is the best way to prevent nails from corroding. The zinc does not protect the steel of the nail, but is corroded first. The thicker the zinc coating, the longer it will be before the nail is attacked. The thickest coating is called hot dipped and is applied by dipping the nails into a bath of molten zinc. Galvanised protection is measured in Microns (each Micron is 0.000001 of an metre thick). The thicker the micron coating the better the protection level of the nails.Type - Stick nail RingGauge/Diameter (mm) 2.8 Length 50 Collation Angle 28 DegreesSKU S280R50G8 Profile RING Finish G8 Description STICK NAIL 2.80-50 RING GAL8 2M Qty per box 2000 Note: This nail will also fit the N80SB, FW28WW-E, N100S
The Monument 2036T ;Olive Puller is ideal for removing olives from copper piping without damaging the attached pipe. Suitable for 15mm and 22mm copper pipe. This puller simply utilises the compression fitting locking nut to remove the olive from the tube. With all the major parts of the tool turned from brass, this olive puller provides a quick and reliable remedy to removing most olives. Made in Britain.
Scan Thermal Latex Coated Gloves have a high visibility design with black latex wrinkle finish coating to palm and fingers. They give excellent grip in both wet and dry conditions. Ideal for the construction, automotive and handling industries. With palm and finger coated latex and high-visibility seamless acrylic knitted thermal liner. Conform to EN388 and EN420 Standards. Abrasion Performance Index (1-4): 3Blade Cut Performance Index (1-5): 1Tear Performance Index (1-4): 3Puncture Performance Index (1-4): 25 x Pairs of Scan Thermal Latex Coated Gloves Size 9 Large
Square Leg Compasses, when fitted with a standard pencil or other marking implement, can be used for drawing circles and arcs or used as dividers to measure distances or repeat a set distance. Manufactured from forged steel with square section legs for grip and balance, this Faithfull divider has a hardened and ground compass point and knurled grip locking screws. Size: 200mm (8in).
These Faithfull Superflow Paint Brushes have synthetic bristles which are made from TECHNOFIL® filaments and which guarantee excellent performance with no bristle loss. Fitted with a 'Kaiser' style lacquered wooden handle for user comfort, these brushes offer superb performance with all modern water based paints. Can also be used with all other types of paint. Faithfull paintbrushes are manufactured to the highest standard using the very best materials. The bristles are bonded using top quality resin to avoid any shedding. All the handles are made from natural wood from renewable sources. The stainless steel ferrules are rustproof.Size: 38mm (1.1/2in)
The Irwin SDS Speedhammer Plus Drill Bits are designed for SDS drilling. They drill exceptionally fast into brick, block, masonry, concrete and granite. The patented, unique single flute design ensures efficient, speedy removal of dust and lower vibrations and 28% greater capacity meaning more efficient waste removal. They have a patented extra short drill bit head which means the head takes 80% of the workload, ensuring higher durability and speed. Clears drilling dust directly into the flute, reducing the risk of clogging. The bits have 25% more tungsten carbide for extra strength and they drill 25% faster than competitive drill bits with the same high durability. In addition, they have more aggressive cutting angles and self-centring for faster drilling.Irwin Speedhammer Plus Drill Bit.Specifications:Diameter: 5.5mm.Total length: 260mm.Working Length: 200mm.
Rustins Strypit is a non-caustic dichloromethane-free gel suitable for removing multiple coats of paint or varnish applied to wood, metal, glass, stone and masonry surfaces. Strypit works best when applied liberally and allowed to penetrate after 2 applications. The gel consistency permits effective use on vertical surfaces.1 x Rustins Strypit 250ml
These Forgefix TechFast Hex Head Screws are designed specifically for fixing cladding and sheet metal to timber frame work. They have a Hex slash point head and are self-drilling for speedy insertion. The screws have a rubber washer beneath the aluminium flange which expands under pressure and forms a permanent weather seal. They are zinc plated and have an 'Elementech' coating for superior corrosion resistance, which has been salt spray tested to 1,000 hours.The TFHT6332 TechFast Hex Head Screws have the following specifications: Size: 6.3 x 32mm.Box quantity: 100.
The Irwin SDS Speedhammer Plus Drill Bits are designed for SDS drilling. They drill exceptionally fast into brick, block, masonry, concrete and granite. The patented, unique single flute design ensures efficient, speedy removal of dust and lower vibrations and 28% greater capacity meaning more efficient waste removal. They have a patented extra short drill bit head which means the head takes 80% of the workload, ensuring higher durability and speed. Clears drilling dust directly into the flute, reducing the risk of clogging. The bits have 25% more tungsten carbide for extra strength and they drill 25% faster than competitive drill bits with the same high durability. In addition, they have more aggressive cutting angles and self-centring for faster drilling.Irwin Speedhammer Plus Drill Bit. Specifications:Diameter: 19.0mm.Total length: 300mm.Working length: 240mm.
Everbuild Stain Block is a spray applied, heavily pigmented white paint which permanently prevents existing stains from water, mould, rust, nicotine, grease, soot and crayon from showing through subsequent coatings. It is quick drying and an overcoat can be applied in 15 minutes. Size: 400ml.
The Steelmaster claw hammer has a heat treated and polished carbon steel head for strength, durability and safety. A seamless, oval tubular steel shaft provides strength and balance and the vinyl soft-grip ergonomic handle gives comfort and grip in use.Weight 567g (1 1/4 lb)
The Irwin Step Drill Bits are designed for precise drilling in thin materials and have a single flute for maximum drilling control into sheet metal. Their unique flute design ensures perfect round holes in sheet metal. A fluted shank also prevents the drill bit from slipping in the chuck, along with a self centring point that will not walk and eliminates centre punching. Made from industrial grade M7 high-speed steel.Irwin Step Drill Bit. Number of hole sizes: 10.Hole diameters: 5, 7.5, 10, 12.5, 15.2, 18.6, 20.4, 22.5, 25.5 and 28.3mm.
The Stanley Tools Super Wonder Bar® Pry Bar is made from forged, high-carbon steel for added strength and durability. Polished, bevelled cutting edges with a high-visibility, powder-coated finish. It has an arched centre for swing during nail pulling, no need for an additional wood block. The extended tongue provides added grip and access for hard-to-reach places. Tight radius on bend angle aids in positioning bar. Useful for almost any prying, nail pulling, wood splitting or levering job you are likely to encounter.
The DEWALT SDS-Plus EXTREME 2®Drill Bit is made from superior carbide grade for long life and greater durability. The hardened body adds further strength and helps to reduce breakage. Its optimised flute design provides efficient debris removal whilst the tip design ensures better bit penetration.This DEWALT SDS-Plus EXTREME 2® Drill Bit has the following dimensions: Diameter: 6mmWorking Length: 150mmOverall Length: 210mmPack Quantity: 1
The Faithfull SDS Max drills have a specially designed shank which enables them to fit into any machine with an SDS Max Chuck. These are generally large and powerful machines and the special SDS Max drill design ensures there is no slippage. All drill bits have a special L shaped flute profile for increased dust extraction and are also ideal for concrete and brick. The Faithfull FAIMAX20320 SDS Max drill has the following specifications:Size: 20mmWorking length: 200mmOverall length: 320mm
The Irwin SDS Speedhammer Plus Drill Bits are designed for SDS drilling. They drill exceptionally fast into brick, block, masonry, concrete and granite. The patented, unique single flute design ensures efficient, speedy removal of dust and lower vibrations and 28% greater capacity meaning more efficient waste removal. They have a patented extra short drill bit head which means the head takes 80% of the workload, ensuring higher durability and speed. Clears drilling dust directly into the flute, reducing the risk of clogging. The bits have 25% more tungsten carbide for extra strength and they drill 25% faster than competitive drill bits with the same high durability. In addition, they have more aggressive cutting angles and self-centring for faster drilling.Irwin Speedhammer Plus Drill Bit. Specifications:Diameter: 15.0mm.Total length: 300mm.Working length: 240mm.
The Thor super Plastic split head hammers have a split cast iron head with two white super plastic faces fastened securely to the handle with two socket head cap screws. There are 5 different weights to choose from in this range. Head design allows quick adjustment or replacement of either the handle or the faces, while the faces are designed to wear and can be rotated for even wear. For use as a heavy-duty, multi-purpose, soft-faced hammer in most industries for assembly, repair and maintenance operations.Size: 4.Diameter: 50mm (2in).Weight: 2100g (4 1/2lb).
Irwin Speed Hammer flat chisels for use with SDS Max machines. Suitable for a wide range of applications: breaking through, breaking up concrete, light demolition work and chasing of channels for pipes and electrical conduit. Suitable for use on concrete and masonry and are supplied in a grey sandblasted professional finish.The Irwin IRW10502188 Speedhammer Max flat chisel has the following dimensions:Size: 25 x 400mm
These Faithfull high-performance, tungsten carbide tipped drill bits fit into SDS Plus chucks which provide a particularly secure, non-slip grip, that transmits maximum power for rotary percussion drilling, mainly into concrete. The SDS Plus bits ensure maximum power transmission due to their unique fluted shaft. This effectively removes situations where a perfectly serviceable cutting edge is rendered useless by a worn shank. The SDS Plus system also enables faster changing of drills using a quick-release keyless chuck.The drill bits are suitable for use in bricks, blocks, concrete containing aggregates, marble, hard stone and other hard masonry materials.The Faithfull FAISDS12410 SDS Drill has a heavy-duty tungsten carbide tip with the following dimensions:Diameter: 12mmWorking Length: 350mmOverall Length: 410mm
This Faithfull SDS Plus Chuck Adaptor allows drill chucks to be used with SDS and SDS Plus machines. It converts SDS to 1/2in - 20UNF. Please note: Drill MUST NOT be used in hammer mode when using this adaptor.
Irwin Sabre Saw Blades 800RG Carbide Grit 200mm, can cut through cast iron, fibreglass, ceramic tile, clay, pipe, stone, brick, plaster and marble.Length: 200mm.Tooth pitch: Carbide grit. Comes in a pack of 2.
The Fiskars FSK137220 Premium Planters™ Cultivator, with its hooked tines, is the perfect tool for aerating and loosening soil and preparing a garden bed. It has robust, corrosion resistant stainless steel hooked prongs that can till and penetrate even the hardest soil. It has a durable and lightweight FiberComp™ body and the hanging hole makes for easy storage after cultivating work is done. Length: 326mm.Width: 68mm.Weight: 100g.
These Faithfull Professional Cobalt Jobber Drill Bits are manufactured from M35 HSSE grade steel with a 5% cobalt content for increased heat resistance and cutting performance. All bits are fully ground and feature a 135° non-slip split point for precise centring and are produced in accordance to DIN 388 for high precision tolerances and geometric accuracy. Cobalt bits cut faster and last longer and are suitable for heavy-duty industrial work in: Alloy steels, carbon steels, cast iron, hardened alloy steels, stainless steels, high temperature alloys, Titanium alloy, high strength steel and carbon fibre composite materials.These Faithfull Professional Cobalt Jobber Drill Bits are supplied pre packed with the following specification: Diameter: 10.5mm.Overall Length:Working Length:Pack Size: 1.
The Facom Power Bar is a hinged 1/2 in drive breaker bar for loosening tight nuts and bolts. It features a stiffened hinge joint for excellent durability, and a non-slip PVC handle which ensures excellent grip and comfort. Chrome finish. Performance: Conforms to ISO 3315, DIN 3122 and NF ISO 3315. Overall length: 381mm.
These Vitrex 332108 Premium Safety Spectacles have an impact and abrasion resistant, clear polycarbonate lens. The spectacles are suitable for various applications, including;Work with fibreglass.Use with domestic power tools.Woodwork.Home renovation.Mowing/trimming.Grinding.Car maintenance. Tested to EN166.CE Approved (CE 0194).
Everbuild Retail/Labelled Packaging Tape is a low noise, quality packaging tape, individually wrapped and labelled. It is ideal for all packing applications. Available in clear or brown tape. Size: 48mm x 50mEverbuild Retail/Labelled Packaging Tape Colour: Brown Size: 48mm x 50m
