This Teng Tools 3/4 inch square drive handle is 19 inches long, providing excellent leverage, as well as providing a solution for working in difficult to access areas. This two-component handle is flexible and so allows turning at an angle. It is manufactured from chrome vanadium steel for strength and durability and has a satin finish.
The Irwin Granite drill bit range has been designed for impact / percussion drilling in very hard materials such as granite, concrete and natural stone. They can drill 40% more holes than conventional masonry drill bits due to an extra hard, thicker and more robust carbide tip. The rounded cutting edges mean higher durability resulting in 50% more accurately sized holes per drill bit.The Irwin IRW10501908 Granite drill bit has the following dimensions:Drillbit diameter: 8.0mmTotal length: 200mmWorking Length: 130mm
These Forgefix Frame Fixings include both plug and screw with Pozi head. The plug is made from Nylon, for a longer life and durability. Its anti-rotation barbs prevent the plug from rotating in the hole. The fixings are through fixing, thus eliminating the need for marking and re-positioning. To use, simply drill through both fixture and into the base material tap in the plug, insert the screw and tighten. APPLICATION:Widely used for batten, window and door frame fixing.Ensure the correct Pozi drive insert bit is used to avoid 'Cam-Out'.Frame Fixing&Plug M8 x 60 Bag 10
A comfortable DynaGrip sleeve surrounds a fully hardened body, which is precision milled for extra long life. The overall length is 25% longer than conventional nail punches, making it easy to set nails in hidden and hard to reach areas. Colour coded sleeves for easier identification of sizes.Tip Size: 1/16inLength: 5inColour: Grey Sleeve
The Stanley FatMax® Thru tang bevel edge chisels have an ergonomic handle design incorporating a shatterproof polymer handle. The ergonomic soft grip longer handle is useful for maximum control, feels good in the hand and is comfortable in all applications. The friction welded bolster also gives strength and durability. The steel striking cap can be struck with a steel hammer for increased cutting force and the body resists most solvents. The ISO Standard Blade is made from high quality ball bearing grade steel EN31 and is fully ground and finished for ultimate sharpness and the full length blade guard provides added safety. This FatMax chisel range has a superior design - 50% stronger handle (than the old Dyna Grip Pro Chisel on side impact test) for extra reassurance and durability. The quality chrome alloy (ball bearing grade) steel provides superior edge retentionThe Stanley STA 0-16-259 FatMax® Thru Tang Chisel is 20mm (13/16 inch) in width and 135mm in length
The DEWALT Extreme Masonry Drill Bits offer excellent quality for all types of masonry work. They last up to 2 times longer and deliver up to 50% more holes per charge on a cordless drill than a standard masonry bit. Optimum carbide grade maximises durability. A unique tip design provides an efficient drilling action and reduced walking for greater accuracy. Optimised milled flute offers fast drilling and the special copper brazing withstands high temperatures. Applications: Typically used for drilling anchors, plastic plugs, fixings or pipework clearance holes. Suitable for masonry, brick, stone, tiles and light concrete. This DEWALT Extreme Masonry Drill Bit has the following specification: Diameter: 6.5mm.Overall Length: 150mm.Working Length: 100mm.
The Stanley DynaGrip paint brush has tapered synthetic filaments for a smooth finish, with no bristle loss. It has a stainless steel ferrule and a DynaGrip handle for comfort and control. Suitable for use with all paints. Type: synthetic filament.Size: 50mm.
The RIDGID E110 Offset Hex Wrench design gives multi-sided, secure grip on all hex nuts, square nuts, unions and valve packing nuts. The extra-wide opening is ideal for securing drain nuts on sinks and tubs and the thin, smooth jaws slip into the tightest places. Specification Size: 240mm (9 1/2in).Pipe Capacity: 29-67mm (1.1/8 - 2.5/8 in).Weight: 0.6kg.
The Vitrex Dry Cut / Wax Filled Drills have a diamond grit edged bit to provide a faster, superior cut and give them an increased life. The bits are wax filled so there is no need for water. Ideal for drilling in all tile types, including porcelain.Vitrex Dry Cut / Wax Filled Drill 6mm
These Forgefix Domed Cover Caps are made from hard-wearing polyamide for increased durability. They have a two piece construction with 'click-on' action for speed of installation. APPLICATION:Offers a concealed yet aesthetically pleasing finish where screws would normally be bared to the elements or the eye.Used for many sign and sanitary installations as well as cupboard and carcass assembly.Once fitted, the caps are extremely difficult to remove.Domed Cover Cap White No. 6-8 Bag 25
These Faithfull Delta Sanding Sheets are manufactured from Aluminium Oxide abrasive on E-weight heavy-duty paper. They are ideal sanding wood, plastic and fillers. The sheets have a hook and loop system, enabling quick change. Specifications: Type: TR2. Size: 93mm. Pattern: 6 hole.Grade: Coarse. Pack quantity: 5.
The Faithfull FAIDCKIT7 7 Piece Diamond Core Drill Kit for cutting clean holes in brick and concrete blocks. They are ideal for plumbing, electrical, engineering installation and general building tasks. All cores are 1⁄2 inch. BSP threaded with 8mm turbo segments. Set contains:3 x Diamond Cores with 8mm Turbo Segments: 38mm, 52mm, and 117mm.1 x SDS Plus Extension Adaptor 10mm x 200mm.1 x Hex Extension Adaptor 12mm x 200mm.1 x A-Taper Pilot Drill 10mm x 200mm.1 x Extractor Drift Key.1 x Carry Case. ROTARY USE ONLY – Must not be used on Percussion/Hammer mode. DO NOT USE DIAMOND CORES LARGER THAN 78mm IN DIAMETER WITH SDS PLUS DRILLS AS THIS MAY RESULT IN DAMAGE TO THE POWER TOOL OR SDS ADAPTOR. Diamond Cores give the best results when used with a purpose built core drilling machine.
The Teng Tools Deep Impact Sockets are specifically designed for use with power tools and air tools. They are manufactured from chrome molybdenum steel in accordance with GGG-W-6608, providing the highest quality. The sockets have a 1/2in drive, and are suitable for both industrial and automotive applications. Each socket is individually branded and size marked for quick identification.This Teng Impact Socket has the following specification: Size: 24mmLength: 78mm
Hammerite Direct To Rust Metal Paint can be painted directly onto rusty surfaces and, thanks to its special 3 in 1 formula, there is no need to use a primer or undercoat - saving you precious time! Hammerite forms a superior barrier that not only seals out moisture, but also gives long lasting protection, both inside and outside. Touch dry in an hour, Hammerite is corrosion resistant and is suitable for use on a wide range of exterior metal including gates, railings, drainpipes, guttering and garden furniture. Protects for up to 8 years.This Hammerite Direct to Rust Metal Paint has the following specifications: Finish: Smooth.Colour: Black.Size: 2.5 Litre.
These Forgefix single-threaded (ST) decking screws have Pozi heads and are specially designed, hardened and green treated. The design of the screw helps prevent splitting of the boards, and allowing them to expand and contract with the changing seasons. APPLICATIONSpecifically used in decking applications but also widely used in exterior timber and fencing applications. The 1,000 hour green treated finish offers excellent corrosion resistance to ACQ (Alkaline Copper Quaternary) treated timber used in construction and decking applications. The Pozidriv screw is similar in appearance to the classic Phillips cross-head, but in fact is very different. The Pozidriv has four additional points of contact, and does not have the rounded corners that the Phillips screw has. The biggest advantage it offers is that, when used with the correct tooling in good condition, it does not cam out, allowing great torque to be applied. The Pozidriv screw can easily be distinguished by a line embossed in the screw head at 45° to the slots for the driver. Single-thread screws have been designed to offer higher pull out values and quicker insertion.Decking Screw Pozi ST Green Anti-Corrosion Treated 4.5 x 50mm Box 200
Depressed Centre Stone Grinding Discs are manufactured using Silicone Carbide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Use in stock removal applications on stone and concrete. By presenting the disc to the work piece at an angle of 45º, the most efficient results are achieved. For use with a variety of machines, mini-grinders to stationary cutting-off machines. Manufactured to EN 12413 standard. SAFETY TIPS Read the manufacturer's instructions carefullyWear goggles to guard against flying chips or dustInspect the condition of the wheel frequentlyAdjust the guard to deflect sparks and dustMaintain the revs and let the wheel do the work1 x Faithfull Depressed Centre Stone Grinding Disc 115 x 6 x 22.23mm
The Irwin Construction Circular Saw Blade with expansion slots which dissipate heat and prevent warping. Its construction grade tungsten carbide tips retain their edge, and the plate is fully hardened for durability. The blade features alternate top bevel tooth grind (ATB) for cross cutting and ripping in all woods. Its corrosion resistant coating provides longer quality performance. Suitable for use with handheld corded machines.This IRWIN Construction Circular Saw Blade has the following specification: Blade Diameter: 165mm.Bore: 30mm.Teeth: 18.Kerf Thickness: 2.5mm.Tooth Config: ATB.
Hammerite Direct To Rust Metal Paint can be painted directly onto rusty surfaces and, thanks to its special 3 in 1 formula, there is no need to use a primer or undercoat - saving you precious time! Hammerite forms a superior barrier that not only seals out moisture, but also gives long-lasting protection, both inside and outside. Touch dry in an hour, Hammerite is corrosion resistant and is suitable for use on a wide range of exterior metal including gates, railings, drainpipes, guttering and garden furniture. The paint has a subtle hammered effect with a metallic sheen. Protects for up to 8 years.This Hammerite ;Direct to Rust Metal Paint ;has the following specification: Finish: Hammered.Colour: Copper.Size: 250ml.
The Irwin Construction Circular Saw Blade with expansion slots which dissipate heat and prevent warping. Its construction grade tungsten carbide tips retain their edge, and the plate is fully hardened for durability. The blade features alternate top bevel tooth grind (ATB) for cross cutting and ripping in all woods. Its corrosion resistant coating provides longer quality performance. Suitable for use with handheld corded machines.This IRWIN Construction Circular Saw Blade has the following specification: Blade Diameter: 184mm.Bore: 16mm.Teeth: 24.Kerf Thickness: 2.5mm.Tooth Config: ATB.
Faithfull Long Series Combination Auger Bits can be used in either a hand or power drill at low speeds. Machined from high quality carbon steel, they feature a pitched screw point for accurate starting with a wide flat spiral for improved stability, straight tracking and fast waste removal. Augers may be use in timber, plywood, MDF and blockwood and can be resharpened using a hand file. Extra long series for deep boring. Overall Length: 400mm.Size.6 mm x 400 mm.
The Ridgid CL-100 Micro Self-Levelling Cross Line Laser has a 360° swivel base and provides instant projection of super-bright vertical and horizontal lines. Its outer casing is IP54 rated, meaning it is protected against splash and dust damage. Uses single knob operation, making it very easy to use and allowing rapid levelling and alignment. Supplied with: 1 x Elevating Tripod, 1 x Laser Enhancing Glasses and 1 x Plastic Carrying Case. Specification Level Accuracy: 2mm @10m.Self-Levelling Range:±6°.Working Range: 30m.Power: 3 x AA Batteries 1.5V (Supplied).Tripod Thread: 1/4in.Laser: Class 2.Weight: 0.50kg.
The Stanley Closed Case Fibreglass Long Tape has a 13mm wide corrosion resistant, UV protected, non-conductive fibreglass blade. The blade is white and has a washable PVC coating to increase life. The high impact ABS closed case is able to withstand severe work conditions and the case is perforated to allow the tape to be cleaned. Available with metric only or both metric and imperial measurements.This Stanley Closed Case Fibreglass Long Tape has metric measurements only, with 2mm graduations for precise measuring. Blade Length: 20mBlade Width: 13mmAccuracy: EC Class III
The Lessmann Conical Knot Brushes with left hand twisted knots to increase stability. The special shape of the conical brushes enables the user to work in hard to reach places. They have been designed for heavy-duty use, for the preparing of metal surfaces before painting, and the removal of slag, rust, scale, or concrete waste.Diameter. 100mm.Width. 10mm.Bore. M10.Wire Gauge.0.50.Wire Type. Steel.Max R.P.M. 12,500.
Straight edge for accurate marking out with a carpenters pencil or metal scriber. Accuracy is 0.01% of the length of the straight edge.Size: 900 x 50mm (36 x 2in).
The Knipex 03 01 series traditional combination pliers are equipped with hardened cutting edges for hard or soft wire up to 2.5mm diameter. The pliers have all the signs of Knipex technology and quality. The oil hardened and tempered construction will give these pliers a longer working life. Knipex 03 01 series combination pliers have separately induction hardened cutting edges that are hardened to approximately 60HRc. They have polished heads and PVC dipped handles. These Knipex pliers have gripping zones for flat and round material. This gives the pliers added grip and makes them ideal for home use, DIY or trade applications. They come in 160, 180 and 200mm versions.These Knipex Combination Pliers ;have the following specification: Length: 180mm (7in).Cutting ;Capacity: Hard: 2.2mm, Medium Hard: 3.4mm, Multi-Strand: 12.0mm.
The Knipex 44 11 Series Internal Straight Circlip Pliers with dipped PVC handles. Used to assemble internal circlips into bores. With solid style forged, precision non slip tips. Made from chrome vanadium electric steel, oil-hardened. Polished head. 44 11 series of internal straight circlip pliers are constructed from chrome vanadium solid style forged top quality steel with precision non-slip tips for added strength and durability. The slim head style allows use in confined areas. Like most of the Knipex range of pliers, all components are oil hardened with polished heads and plastic coated handles. Knipex circlip pliers are ideal for all trade or DIY applications and especially the automotive trade.Length: 140mm (5.½ inches).Bore size: 8mm - 13mm.
The IRWIN bi-metal holesaws have been designed for the professional, and made to provide long lasting performance for use in general construction, electrical installation, plumbing, heating and ventilation, and remodelling applications. The sharp, variable tooth (4-6 pitch) design provides a faster cutting action and enhanced performance in a variety of materials and cutting applications. The bi-metal construction and the electron beam welded teeth give the user a stronger, longer lasting blade. The IRWIN holesaw range is available from sizes 14 mm (9/16 Inch) to 152 mm (6 Inch), with a line up of high quality arbors and a pilot drill to cover all application requirements. Cuts a variety of materials including: aluminium, copper, iron, stainless steel, wood and zinc.Irwin Holesaw Bi Metal High Speed Diameter: 86mm.
The IRWIN bi-metal holesaws have been designed for the professional, and made to provide long lasting performance for use in general construction, electrical installation, plumbing, heating and ventilation, and remodelling applications. The sharp, variable tooth (4-6 pitch) design provides a faster cutting action and enhanced performance in a variety of materials and cutting applications. The bi-metal construction and the electron beam welded teeth give the user a stronger, longer lasting blade. The IRWIN holesaw range is available from sizes 14 mm (9/16 Inch) to 152 mm (6 Inch), with a line up of high quality arbors and a pilot drill to cover all application requirements. Cuts a variety of materials including: aluminium, copper, iron, stainless steel, wood and zinc.Irwin Holesaw Bi Metal High Speed Diameter: 121mm.
The LENOX® Bi-Metal Holesaw features an advanced tooth design that increases cutting life. The large sharp teeth provide fast, efficient cutting in wood. The optimised tooth design also penetrates metal with ease. Increased wall thickness improves durability and minimises tooth loss. The SPEED SLOT® staircase design provides fast and easy plug ejection.This LENOX® Bi-Metal Holesaw has the following specification: Diameter: 30mmArbor: Standard: 1L, 4L or 5L; SNAP-BACK™: 5L
The IRWIN bi-metal holesaws have been designed for the professional, and made to provide long lasting performance for use in general construction, electrical installation, plumbing, heating and ventilation, and remodelling applications. The sharp, variable tooth (4-6 pitch) design provides a faster cutting action and enhanced performance in a variety of materials and cutting applications. The bi-metal construction and the electron beam welded teeth give the user a stronger, longer lasting blade. The IRWIN holesaw range is available from sizes 14 mm (9/16 Inch) to 152 mm (6 Inch), with a line up of high quality arbors and a pilot drill to cover all application requirements. Cuts a variety of materials including: aluminium, copper, iron, stainless steel, wood and zinc.Irwin Holesaw Bi Metal High SpeedDiameter: 24mm.
The LENOX® Bi-Metal Holesaw features an advanced tooth design that increases cutting life. The large sharp teeth provide fast, efficient cutting in wood. The optimised tooth design also penetrates metal with ease. Increased wall thickness improves durability and minimises tooth loss. The SPEED SLOT® staircase design provides fast and easy plug ejection.This LENOX® Bi-Metal Holesaw has the following specification: Diameter: 102mmArbor: Standard: 2L, 3L, 6L or 7L; SNAP-BACK™: 2L, 6L
The LENOX® Bi-Metal Holesaw features an advanced tooth design that increases cutting life. The large sharp teeth provide fast, efficient cutting in wood. The optimised tooth design also penetrates metal with ease. Increased wall thickness improves durability and minimises tooth loss. The SPEED SLOT® staircase design provides fast and easy plug ejection.This LENOX® Bi-Metal Holesaw has the following specification: Diameter: 17mmArbor: Standard: 1L, 4L or 5L; SNAP-BACK™: 5L
These Faithfull Padlocks have a brass body and steel shackle. They have a self-locking action. These Faithfull brass bodied padlocks provide an excellent level of security. Each lock features a high strength, brass cylinder mechanism that is accurately machined, durable and rust resistant. They have stainless shackle springs and a steel shackle. All locks above 30mm in body size have hardened anti-cut and saw resistant shackle with double locking tongues for improved security. Each pack is supplied with 3 keys.The FAIPLB50 Brass Padlock combines a quality brass 6-pin tumbler mechanism and a hardened, cut and saw resistant shackles, along with a self-locking action to provide a high level of security. It is extremely resilient to all types of weather and suitable for outside applications. The padlock has the following specifications: Overall Width: 50mm.Internal Shackle (WxH): 26.0 x 25.0mm.Shackle Diameter: 8.0mm.Security Level: 7/9.
The IRWIN bi-metal holesaws have been designed for the professional, and made to provide long lasting performance for use in general construction, electrical installation, plumbing, heating and ventilation, and remodelling applications. The sharp, variable tooth (4-6 pitch) design provides a faster cutting action and enhanced performance in a variety of materials and cutting applications. The bi-metal construction and the electron beam welded teeth give the user a stronger, longer lasting blade. The IRWIN holesaw range is available from sizes 14 mm (9/16 Inch) to 152 mm (6 Inch), with a line up of high quality arbors and a pilot drill to cover all application requirements. Cuts a variety of materials including: aluminium, copper, iron, stainless steel, wood and zinc.Size: 33 mm dia
The Irwin Long Series Blue Groove 4X Flat Bits have a patented groove point, and cutting edge designed to cut and not scrape the timber 4 times faster than standard flat bits. The parabolic scoop optimises control and removal of wood chips. Increased relief angle from 12° to 17°. The shank is 400mm in length and 10% larger in diameter for added durability.The Irwin IRW10502830 Blue Groove 4X long flat bit has the following dimensions:Drill bit diameter: 6.0mm
The IRWIN Bi-Metal Blue Snap-Off Blades are shatterproof for ultimate safety, making them suitable for universal use in most applications. They also feature soft snap technology for safer segment breakage and stay sharper 3x longer than standard blades.1 x IRWIN Bi-Metal Blue Snap-Off Blades 18mm Pack of 8
