Bahco ERGO VDE Insulated Screwdrivers are suitable for work on live equipment, up to 1,000 Volts, high quality blade insulation moulded directly onto the blade. The high-performance alloy steel blade has been chrome plated and entirely hardened for high protection against corrosion, long life tool. A black oxide tip provides higher accuracy. Developed according to the scientific ERGO process. A three-component handle provides maximum user comfort. The soft material with ridged surface provides superior grip and greater force transmission. A flat face prevents the screwdriver from rolling away. Its easy to choose the right tip, thanks to the colour-coded handle* and permanent symbol on the domed end. Each screwdriver is individually inspected and manufactured according to IEC 60900, tested in a water bath at 10,000V. This set of 7 contains: 4 x Slotted Screwdrivers: 2.5 x 75mm, 3.5 x 100mm, 4.0 x100mm and 5.5 x 125mm. 2 x Phillips Screwdrivers: PH1 x 80 and PH2 x 100. 1 x Voltage Tester 150-250V. *No colour identification in extra small handle, size 2.5 (BE-8010S), 3.0 (BE-8220S) and PZ0 (BE-8800S).
The Trend Mortice & Tenon Jig MT/JIG enables mortice, tenons and dowel joints to be cut with a router. Ideal for cabinets, chairs and table joints. There is a one set-up system for both mortice and tenon giving perfectly fitting joints and is fully adjustable for compound angle joints up to 45º. The reversible templates can be used to produce round and square end tenons and for accurate dowelling applications. It cuts mortice and tenon sizes of 1/4in (6.35mm) to 5/8in (15.9mm). A Unibase may be required for certain makes and models of router. All tenons are cut with a 5/8 inch diameter straight cutter (Ref. C026). The width of the tenon is adjusted by using different guide bush diameters. International PCT Appl N.CNC precision manufactured plates and body. Guide bushes are included but cutters are required. Specification Material Thickness: 12 - 47mm.Tenon Thickness: 4.8 - 16mm.Angle Tilt Compound: -10º to 45º.
The Union 2201 5 lever sashlocks are ideal for timber doors hinged on the left or right and the keys are suitable for doors up to 54mm thick. The 12.5mm anti-saw deadbolt is locked or unlocked by the key from either side with the latch bolt withdrawn by a lever handle from either side. The latchbolt is easily reversible from outside of case. The 2201 is supplied with covered escutcheon to match forend with the striking plate finished to match forend. The lock is also pierced to accept bolt through furniture. Deadbolt Brass, with hardened steel rollersRebate Kit 2989 (13, 19 or 25mm sizes)Keying 600 standard differs (keys are not numbered for security purposes) A deadlock has a single deadbolt which is locked or unlocked and locked by means of a key from either side, whereas, a sashlock has both a deadbolt and a latch which is operated from either side by a lever handles. The security level of mortice deadlocks or sashlocks ranges from 2-5 levers. The higher the number of levers the more secure the lock is.Forend Finish: Brass (Striking Plate Security box type, finished to match forend) Case Size: 77.5mm x 108mm (3in) Backset: 57mm This is the measurement from the edge of the door to the centre of the keyhole. Centre: 57mm This is the measurement from the centre of the follower, which operates the handles, to the centre of the keyhole. In the UK this is commonly 57mm. Pack: Boxed
Medium flexibility grinder pads ideal for standard use. They feature a threaded metal insert moulded into the pad as well as the removable locknut. Made in Great BritainType: 171-XUTo suit: 178 mm Angle Grinders.Thread: 5/8 x 11 UNC. Abrasive Disc Size: 178 mm x 22 mm (7in). Machines Fitted.5/8 UNC Internal Thread and quick release lock nut.Atlas Copco, CP, Compare, Desoutter, Ingersoll Rand, Kango, Wolf 4157. Pin Spanner - Blue
The Stanley FatMax® Screwdriver sets have a chrome vanadium steel bar allows high torque and reduces the risk of tip breakage and the handle is moulded directly to shaft for a virtually unbreakable bond - gives long life and durability. The soft grip handle gives a perfect combination of great grip and reduced fatigue in use and is colour coded for easy identification of the right tip type for the application. The smooth domed end offers fast, comfortable spinning action and the large diameter handle offers higher torque when driving wood screws. Contents: Parallel: 3.5 x 75mm, 5.5 x 150mm.Flared: 5.5 x 100mm, 8 x 150mm. Pozi: PZ1 x 100mm, PZ2 x 125mm.
The unique and patented clip hook of the MasterLock bungee prevents the bungee from slipping when in use. Plastic moulded injection hooks with steel cores offer up to 40Kg of resistance and make it safer to use. High-quality, durable finish with TUV certificate. Diameter: 8mm.Working Capacity: 40kg.Length: 80cm.
The Bahco C1997LM/9P Metric Long Ball End Coloured Hex L-Key Set, 9 piece, is ideal for driving bolts and screws which have hexagonal sockets. Long arms ensure excellent leverage, which makes driving easier. The ball ends of the keys allow them to be used up to an angle of 30 degree to the socket, whilst the hexagonal ends ensure an excellent fit into the screw/bolt head.Made of high quality steel, entirely hardened, with a phosphate finish, which provides protection against corrosion, providing a long lasting life. Each size is fitted with a different coloured injection moulding grip. Its soft-touch feeling is pleasant to hold, with non-slip grip and oil resistant. These different coloured grips also enable quicker identification of required size.Supplied in a compact sleeve-case for instant selection of the required size. It allows easy storage, whilst keeping the keys together. Specifications: Sizes: 1.5, 2, 2.5, 3, 4, 5, 6, 8 and 10mm.Piece: 9.
Replacement screw in Nylon face for use with Faithfull soft face hammers. Widely used in assembly applications including engineering, furniture making, shop fitting, partitioning, double glazing and injection moulding operations.1 x Faithfull Nylon Hammer Replacement Face 38mm
These Union 2294 2 lever mortice bathroom sashlocks are suitable for timber doors hinged on the left or right (up to a thickness of 54mm) and requiring turn and emergency release functions. They can be deadbolt locked or unlocked by separate turn (not supplied) from inside and also deadbolt unlocked by separate emergency release from outside (not supplied). The 11mm reversible latchbolt bolt is withdrawn by lever handle from either side and the two way action is suitable for lightweight knobs or sprung handles. Please note these locks are not suitable for unsprung lever handles. Case Steel, black powder coatFollower 8mm square, 5mm turn followerNot suitable for bolt through fixing A deadlock has a single deadbolt which is locked or unlocked and locked by means of a key from either side, whereas, a sashlock has both a deadbolt and a latch which is operated from either side by a lever handles. The security level of mortice deadlocks or sashlocks ranges from 2-5 levers. The higher the number of levers the more secure the lock is.Forend Finish: Chrome Finish (Striking Plate Security box type, finished to match forend) Case Size: 63mm x 102mm (2.5in) Backset: 44.5mm This is the measurement from the edge of the door to the centre of the keyhole. Centre: 57mm This is the measurement from the centre of the follower, which operates the handles, to the centre of the keyhole. In the UK this is commonly 57mm. Pack: Boxed
The Bahco BE-9878SL ERGO VDE Insulated, 12 Piece, Screwdrivers are suitable for work on live equipment, up to 1,000 Volts, high quality blade insulation moulded directly onto the blade. The high-performance alloy steel blade has been chrome plated and entirely hardened for high protection against corrosion, a long life tool. A black oxide tip provides higher accuracy.Developed according to the scientific ERGO process. A three-component handle provides maximum user comfort. The soft material with ridged surface provides superior grip and greater force transmission. A flat face prevents the screwdriver from rolling away. Its easy to choose the right tip, thanks to the colour-coded handle* and permanent symbol on the domed end.Each screwdriver is individually inspected and manufactured according to IEC 60900, tested in a water bath at 10,000V. This set of 12 contains: 5 x Slotted Slim Screwdrivers: 2.5 x 75mm, 3.0 x 75mm, 3.5 x 100mm, 4.0 x 100mm and 5.5 x 125mm. 2 x Phillips Slim Screwdrivers: PH1 x 80mm and PH2 x 100mm. 2 x Pozidriv Slim Screwdrivers: PZ1 x 80mm and PZ2 x 100mm. 1 x TORX Slim Screwdriver: T10 x 100mm. 2 x Plus-Minus Slim Screwdrivers: 5.0/PH1 x 80mm and 6.0/PH2 x 100mm.
These Union 2294 2 lever mortice bathroom sashlocks are suitable for timber doors hinged on the left or right (up to a thickness of 54mm) and requiring turn and emergency release functions. They can be deadbolt locked or unlocked by separate turn (not supplied) from inside and also deadbolt unlocked by separate emergency release from outside (not supplied). The 11mm reversible latchbolt bolt is withdrawn by lever handle from either side and the two way action is suitable for lightweight knobs or sprung handles. Please note these locks are not suitable for unsprung lever handles. Case Steel, black powder coatFollower 8mm square, 5mm turn followerNot suitable for bolt through fixing A deadlock has a single deadbolt which is locked or unlocked and locked by means of a key from either side, whereas, a sashlock has both a deadbolt and a latch which is operated from either side by a lever handles. The security level of mortice deadlocks or sashlocks ranges from 2-5 levers. The higher the number of levers the more secure the lock is.Forend Finish: Polished Brass Finish (Striking Plate Security box type, finished to match forend)Case Size: 76mm x 102mm (3in)Backset: 57mm This is the measurement from the edge of the door to the centre of the keyhole.Centre: 57mm This is the measurement from the centre of the follower, which operates the handles, to the centre of the keyhole. In the UK this is commonly 57mm.Pack: Visi
The Faithfull Curved Diamond Whetstone has a compact design and is ideal for use on flat and curved blades. It features two flat sides and two removable diamond rods. The two flat sides have 400G coarse and 600G medium grits and can be used on chisels, knives, scissors and many other cutting blades. The 600G 6mm and 12mm diameter diamond rods are ideal for honing concave wood carving chisels and moulding plane blades. The rods can be removed to be used individually or rotated in the holder to increase working life. Can be used dry or with water as a lubricant, no oils are necessary. Specification: Four Diamond Surfaces: 2 x Flat: 20 x 100mm 400G, 20 x 100mm 600G, 2 x Rods: 6 x 100mm 600G, 12 x 100mm 600GOverall Size: 103 x 40 x 12mm
