The ITL Insulated Shrouds are made from injection moulded nylon 11, which exceeds the requirements of IEC 60900, the industry standard for live line working. In addition, this tool meets the requirements of Category 'C', which requires it to perform at extreme temperatures of -40°C to +70°C, making it unique in this category. These insulated tools are the toughest in the market, being virtually indestructible. With a lifetime warranty on both the tool and insulation.
1 x ITL Insulated Shroud, Single Phase
International insulated screwdriver set of 5 with injection moulded nylon 11 handles, which exceed the requirements of IEC 60900, the industry standard for live line working. In addition, these tools meet the requirements of Category 'C', which requires them to perform at extreme temperatures of -40°C to +70°C, making them unique in this category. ITL insulated tools are the toughest in the market, being virtually indestructible. ITL also offers the best guarantee in the market - a lifetime warranty on the tool and insulation, plus a 30 day no quibble money back guarantee. The set contains: 1 x Pozidriv No.2 Screwdriver.1 x 7mm (3in) Terminal Screwdriver.1 x 7mm (3in) Electricians Screwdriver.1 x 100mm (4in) Electricians Screwdriver.1 x Circuit Tester.
The Stanley FatMax® Phillips tip screwdrivers have a chrome vanadium steel bar which allows high torque and reduces the risk of tip breakage, and the handle is moulded directly to the shaft for a virtually unbreakable bond which gives long life and durability. The soft grip handle gives a perfect combination of great grip and reduced fatigue in use and is colour coded for easy identification of the right tip type for the application. The smooth domed end offers fast, comfortable spinning action and the large diameter handle offers higher torque when driving wood screws.Type PhillipsTip Size PH.00Blade Length 50mm (2 in)
The HiKOKI DV18DFXJMZ Hammer Drill has a 13mm keyless chuck, making it compatible with a wide range of accessories. Its powerful motor provides easy handling and the 22 stage clutch allows you to easily adjust to any job. The ergonomic design and rubber over mould increase user comfort and control. There is also an integrated LED light for good illumination of the work area.Supplied with: 2 x 18V 2.0Ah Li-ion Batteries, 1 x Charger and 1 x Carry Case.Specifications:No Load Speed: 0-350/0-1,400/min.Impact Rate: 0-4,900/0-19,600/bpmClutch Stage Number: 22Clutch Torque: 1 - 6NmMax. Hard Joint Torque (1st Gear): 55NmMax. Soft Joint Torque (1st Gear): 23NmCapacity: Aluminium/Steel 13mm, Brick/Masonry 13mm, Wood 38mmCapacity Wood Screw: 8.0 x 75mm
The Lessmann End Brushes are fitted with a 6mm shank for cleaning and de-burring in hard to reach areas. They are ideal for the removal of paint and the cleaning of moulds and castings. Also for working on edges and recesses and the inside of bores etc.The Lessmann Pointed End Brush With Shank has the following specification: Wire Type: Steel.Diameter: 23mm.Wire Height: 25mm.Wire Gauge: 0.30.Max Speed: 18,000/rpm.
The Stanley FatMax® Pozidriv tip screwdrivers have a chrome vanadium steel bar which allows high torque and reduces the risk of tip breakage, and the handle is moulded directly to the shaft for a virtually unbreakable bond which gives long life and durability. The soft grip handle gives a perfect combination of great grip and reduced fatigue in use and is colour coded for easy identification of the right tip type for the application. The smooth domed end offers fast, comfortable spinning action and the large diameter handle offers higher torque when driving wood screws.Type - PozidrivTip Size PZ.2Blade Length 125mm (5 in)
Ovollo and rounding over bearing guided cutters are ideal for curved work, they can be used on natural timbers, man-made particles and fibre boards. Popular uses include edging window frames, glazing bars, cabinets, table tops, pencil rounds, trophies, shelves and fire surrounds. They can also be used to produce bullnose edge moulds. All cutters supplied with two bearings, larger bearing removes the quirk producing a round over profile.Tooling : T.C.T.1/4in Shank.R = 4.8 mmD = 22 mmC = 12.7 mmBearings = 9.5 and 12.7 mm
The Stanley FatMax® Parallel tip screwdrivers have a chrome vanadium steel bar which allows high torque and reduces the risk of tip breakage, and the handle is moulded directly to shaft for a virtually unbreakable bond which gives long life and durability. The soft grip handle provides great grip and reduced fatigue in use. Colour coded for easy identification of the right tip type for the application. The smooth domed end offers fast, comfortable spinning action and the large diameter handle offers higher torque when driving wood screws. Parallel tips are ideal if the screw needs to be driven below the material surface.Type - Parallel Tip Size 4.0mmBlade Length 150mm (6 in)
1 x ITL Insulated Slotted/Phillips Screwdriver 100 x 6mm x PH2. The ITL Insulated Slotted/Phillips Screwdrivers made with an injection moulded nylon 11 handle, which exceeds the requirements of IEC 60900, the industry standard for live line working. In addition, this tool meets the requirements of Category 'C', which requires it to perform at extreme temperatures of -40°C to ;70°C, making it unique in this category. These ITL insulated tools are the toughest in the market, being virtually indestructible. With a lifetime warranty on both the tool and insulation, plus a 30 day no quibble money back guarantee. 100 x 6mm x PH2
Trend Bearing Guided Ovolo & Round Over Cutters are ideal for curved work. They can be used on natural timber, man-made particleboard and fibreboard. Popular uses include edging window frames, glazing bars, cabinets, tabletops, pencil rounds, trophies, shelves and fire surrounds. They can also be used to produce bullnose edge moulds. Supplied with two bearings 9.5mm and 12.7mm diameter. The larger bearing removes the quirk producing a round over profile.This Trend TCT Bearing Guided Ovolo & Round Over has the following specification: Radius: 3mmDiameter: 18.7mmCutter Height: 9.5mmShank: 1/4inBearings: 9.5, 12.7mm
The ITL Insulated 1/2in Drive Reversible Ratchet. Made from injection moulded nylon 11, which exceeds the requirements of IEC 60900, the industry standard for live line working. In addition, this tool meets the requirements of Category 'C', which requires it to perform at extreme temperatures of -40°C to and70°C, making it unique in this category. These insulated tools are the toughest in the market, being virtually indestructible. With a lifetime warranty on both the tool and insulation.
The Hozelock 2698 Ultra Max Multi Spray Gun has a die cast metal body for increased durability with soft over moulding for comfort. It also has a lockable on/off trigger with separate flow control trigger. Seven spray patterns : Powerful Jet for cleaning, Fast Fill for filling up buckets and watering cans, Fine Mist for seedlings, High Definition Rose for gentle watering, Fan Spray for rinsing soap off cars, Cone Spray for delicate watering and Aerated for producing a soft flow of water that is gentle enough to not disrupt your flower bed.
