The Unibond Optimum Moisture Absorbing System helps prevent condensation, damp and bad smells, as well as the development of mould and dust mites, which could cause allergies. Ideal for every room inside the home and caravans/boats. No noise and no electricity.Suitable for large rooms up to 20m².Aero 360 Moisture Absorber Refills last for approximately 3 months in a 20m² room. 2 x 450g Refill Tabs.
Pack of 10
1 x ITL Insulated 3/8in Drive Socket 13mm. The ITL Insulated 3/8in Drive Sockets are fully insulated and exceed international standards. They have a lifetime guarantee on both the tool and insulation. Each socket is manufactured from injection moulded nylon thermoplastic, and are 100% tested to IEC60900, Category C and ASTMF1505. They are designed to withstand extreme impact, abrasion, and are flame retardant. ITL tools are 100% tested using 1000 volts for 3 minutes submerged in water. They are Category C Impact Tested for operation within a greater temperature range -40ºF to ;158ºF, -40ºC to ;70ºC. 13mm
Description: The Positive Input Ventilation (PIV) unit has been designed to prevent and treat condensation and mould quickly. It is perfect for refurbished properties thanks to it being easy to fit for installers and discreet for homeowners. The unit offers a quick and simple solution as it draws fresh air from the loft, filters it and gently feeds it into the dwelling via a ceiling-mounted diffuser. Clean, fresh filtered air with a lower moisture content dilutes, displaces and replaces contaminated and moisture-laden air. The PIV unit with heater comes with a heater fitted to the unit, this helps remove cold air entering the property. The controls allow the unit with 500W heater to be adjusted making it adaptable for different lifestyles.
Application: Bathroom
Key features:
500W Heater
Fully adjustable between 19l/s � 49l/s
Low running costs
Low sound level
Complete with ceiling diffuser, flexible duct and G4 filters
The PIV unit can also be set to �Radon� mode in properties that are affected by high radon gas levels. The unit will run continuously to ensure supply of good indoor air to protect residents from harmful gases.
Specifications:
IPX2 rated
Easy to install and commission
Dimensions:
H365 x W930 x D425mm
The ITL Insulated Adjustable Wrenches with injection moulded nylon 11 handles, which exceed the requirements of IEC 60900, the industry standard for live line working. In addition, these tools meet the requirements of Category 'C', which requires them to perform at extreme temperatures of -40°C to +70°C, making them unique in this category. These insulated tools are the toughest in the market, being virtually indestructible. With a lifetime warranty on the tool and insulation, plus a 30 day no quibble money back guarantee.International Insulated Adjustable Wrench. Size: 300mm (12in).
This Stanley Dynagrip stripping knife is suitable for fast wallpaper removal. The unique curved handle, which is moulded directly onto the blade for durability, has been designed and tested to ensure control and comfort whilst stripping, and resists all normal paint solvents. The blade is made of fully ground stainless steel which makes it strong, easy to clean and rust-free.Blade width: 100mm.
Junior Hacksaw with square steel frame and moulded grip handle and lower blade tensioner. A lever is incorporated in the handle enabling easy and rapid blade changing. Deep throat for good work capacity.Spare blade included. Blade length: 150mm (6in).
Crown Ultra Matt+ | Pure Brilliant White Vinyl Matt Emulsion | Mould Protection Paint | 5L Upgrade your interiors with our premium Vinyl Matt Emulsion- the perfect choice for walls and ceilings. With exceptional mould protection and a crisp, clean finish, your spaces will stay fresher for longer.Ultra white finish for bright, modern spaces. Superior coverage and hiding power. Excellent adhesion on prepared surfaces.Product Benefits: Protects against mould
The Stanley FatMax® Pozidriv tip screwdrivers have a chrome vanadium steel bar which allows high torque and reduces the risk of tip breakage, and the handle is moulded directly to the shaft for a virtually unbreakable bond which gives long life and durability. The soft grip handle gives a perfect combination of great grip and reduced fatigue in use and is colour coded for easy identification of the right tip type for the application. The smooth domed end offers fast, comfortable spinning action and the large diameter handle offers higher torque when driving wood screws.Type - PozidrivTip Size PZ.2Blade Length 30mm (1 3/16 in)
Zinsser's Bulls Eye® 1-2-3 is a universal interior and exterior, water-based, primer-sealer. It offers low odour application, quick drying convenience and excellent adhesion to glossy surfaces. Bulls Eye® 1-2-3 effectively primes and seals a wide variety of interior and exterior surfaces. A ‘bond coat’ primer that’s great for hard-to-stick surfaces, it offers excellent adhesion without sanding. Bulls Eye® 1-2-3 also prevents rust formation when applied over clean ferrous metal such as iron and steel. It is mould and mildew-resistant, making it ideal for high-humidity areas such as bathrooms and laundry rooms. It offers effective resistance to the formation of mould and mildew on the underside and surface of the primer film, prolonging the life of the paint job. Bulls Eye® 1-2-3 is great for blocking stains. It permanently and completely seals graffiti, grease spots, tar and asphalt – inside and out. It is rust inhibitive and ideal for new metal. It resists flash rusting in its 'wet' state and provides rust resistance for the life of the coating. It dries to a smooth, tight, water-resistant film that is perfect for painting iron railings, steel doors, metal panels, duct work, galvanised gutters – any interior or exterior metal surface. Bulls Eye® 1-2-3 is white in colour and can be applied via air sprayer, brush, conventional spray, pad or roller. It has a quick 35 minute drying time and 1 hour dry time and can be tinted towards the colour of your topcoat (mid-tone colours only) to eliminate the need for one coat of paint – saving both time and money. Application information: 10m² per Litre. Touch dry: 35 minutes. Hard dry: 7 days. Recoatable: 1 hour.The Zinsser BE1231L Bulls Eye 1-2-3 is supplied in the following: Container type: Tin. Volume: 1 Litre.
Zinsser's Bulls Eye® 1-2-3 Plus is a universal water-based primer, sealer and stain killer. It is ideal for interior and exterior painting projects. Bulls Eye® 1-2-3 Plus delivers performance benefits normally only associated with solvent-based primers, including exceptional adhesion and stain blocking. It is specially formulated to resist re-wetting, meaning it can block water soluble stains like a solvent-based primer and seal oil-soluble stains, meaning painting projects can be completed with just one primer. Uniquely, it can be applied directly over water and smoke stains. Thanks to Hydro Pliolite® resin, Bulls Eye® 1-2-3 Plus delivers unparalleled adhesion and deals effortlessly with hard to paint interior and exterior substrates such as glossy surfaces, ceramic tiles, galvanised metal, vinyl, hardboard, melamine, varnish, plastic, GRP, UPVC, wood, masonry and more. Bulls Eye® 1-2-3 Plus is rust inhibitive and ideal for new metal. It resists flash rusting in its 'wet' state – and provides rust resistance for the life of the coating. It dries to a smooth, tight, water-resistant film that is perfect for painting iron railings, steel doors, metal panels, duct work, galvanised gutters – any interior or exterior metal surface. Bulls Eye® 1-2-3 Plus is mould and mildew-resistant, making it ideal for high-humidity areas such as bathrooms and laundry rooms. It offers effective resistance to the formation of mould and mildew on the underside and surface of the primer film, prolonging the life of your paint job. All of the above benefits combine with ultra low VOC content, a lightning quick drying time of just 30 minutes and a 1 hour recoat time. Bulls Eye® 1-2-3 Plus is white in colour and can be applied via airless sprayer, brush, conventional spray, pad or roller. Application information:Coverage: 10m² per Litre. Touch dry: 35 minutes. Hard dry: 7 days. Recoatable: 1 hour.Zinsser BE123P1L Bullseye 1-2-3 Plus is supplied in the following:Container type: Tin. Volume: 1 Litre.
The Faithfull Contract Adjustable Spanners have a ring spanner built into the handle. The drop forged construction and the moulded soft-grip handle combine strength with comfortable use. The adjustable jaw enables each wrench to be used on a number of different sized nuts or bolts.Jaw Capacity: 40mmLength: 300mmRing in Spanner Handle: 17mm
The Faithfull Contract Adjustable Spanners have a ring spanner built into the handle. The drop forged construction and the moulded soft-grip handle combine strength with comfortable use. The adjustable jaw enables each wrench to be used on a number of different sized nuts or bolts.Jaw Capacity: 30mmLength: 200mmRing in Spanner Handle: 13mm
