The elho The Ocean Collection Round 14cm is an indoor flower pot moulded from 100% recycled plastic, including plastic recovered from the sea. Plant into it directly or drop a nursery pot inside and use it as a cover pot. The Atlantic Blue finish carries the marbled tone that comes from the recycled material, so each pot is slightly different.Features & Benefits
Made from 100% recycled plastic, part of it reclaimed marine waste such as fishing nets, ropes and dragnets
Colour varies slightly from pot to pot because of the recycled content, so no two are identical
No drainage hole and no water reservoir, so it can sit on furniture without a separate saucer
UV protected and frost resistant
Produced using wind energy and fully recyclable at the end of its life
Covered by elho's 99-year guarantee
Diameter: 14cm
Dimensions: W14 x H13 x D14cm
Capacity: 1.6 litres
Colour: Atlantic Blue
Use: Indoor
1 x ITL Insulated 1/2in Drive Socket 13mm. The ITL Insulated 1/2in Drive Sockets are fully insulated and exceeds international standards. They have a lifetime guarantee on both the tool and insulation. Each socket is manufactured from injection moulded nylon thermoplastic, and are 100% tested to IEC60900, Category C and ASTMF1505. They are designed to withstand extreme impact, abrasion, and are flame retardant. ITL tools are 100% tested using 1000 volts for 3 minutes submerged in water. They are Category C Impact Tested for operation within a greater temperature range -40ºF to ;158ºF, -40ºC to ;70ºC. 13mm
XTrade X0900035 FlexiTub Black 42L - 100% Recycled MaterialThe XTrade X0900035 is a 42 Litre capacity, Black Flexible Tub with an ALMost endless amount of uses. Because of their shape, they stack inside each other for neat storage. Moulded in one piece with 2 strong carry handles. The Tub is environmentally friendly, made from 100% recycled material, with no harm to nature. Could be used in the building trade, for gardening, or domestically as a washing basket. The list goes on and on.
Made from a strong highly flexible material
High weight carrying capacity
Frost and UV resistant
1000s of uses
Made in Europe
Capacity: 42 Litres
Dimensions: 50 x 44 x 34cm
The DEWALT D26204K is a Premium 1/4 inch plunge and fixed base variable speed combination router with full wave electronic speed control with feedback which ensures the selected speed is maintained under any load for a consistent finish in all grades of timber, aluminium and plastics. It has variable speed control (16,000 to 27,000/min) this enables router bit to be optimised for application. The compact, light weight design increases ease of use and user comfort and the plunge base incorporates fine tune rod for precise depth adjustment. The aluminium motor housing can be transitioned quickly to a fixed base attachment increasing the versatility of the machine. The five position adjustable turret enables stepped or repeated plunge cuts with the over moulded rubber handles provide a comfortable and secure grip. The dual LED lights increase the visibility around the router bit during operation and the multiple spindle lock detants enables quick and simple router bit change. Ideal for Beading, Template work, Profiling, Trenching, Dovetailing. Supplied with: 2 x Parallel fences, 2 x Dust extraction adapter, 17 mm spanner, 17 mm guide bush, Plunge and Fixed base, Centering cone and Tough Kit Box. Specification Input Power: 900WNo Load Speed: 8,000-27,000/min.Collet: 6/8mm (1/4in)Plunge Depth: 55mmMax. Cutter Diameter: 36mmWeight: 2.9kg1 x DEWALT D26204K 1/4in 8mm Premium Plunge & Fixed Base Combi Router 240V
The STANLEY® Magnetic Hi-Vis Pocket Level has strong, hi-vis moulded plastic casing for durability and increased visibility. Fitted with 2 easy to read vials and a rare magnet base.
1 x ITL Insulated Nut Spinner 2BA (150mm Stud Clearance). The ITL Insulated Nut Spinners are made from injection moulded nylon 11, which exceeds the requirements of IEC 60900, the industry standard for live line working. In addition, this tool meets the requirements of Category 'C', which requires it to perform at extreme temperatures of -40°C to ;70°C, making it unique in this category. These insulated tools are the toughest in the market, being virtually indestructible. With a lifetime warranty on both the tool and insulation. 2BA (150mm Stud Clearance)
The Proplas Clip Lid Dustbin is an 90 litre plastic bin for household and garden waste. The clip-on lid fastens to the body to keep the contents covered. It is moulded from 100% recycled plastic.Features & Benefits
90 litre capacity
Clip-on lid fastens to the bin body
Moulded from 100% recycled plastic
Suitable for household and garden waste
Black finish for outdoor use
Capacity: 90 litres
Colour: Black
Material: 100% recycled plastic
The Arctic Access Panel Range offers a simple, low cost, high quality solution to provide protected openings in ceilings and walls for access to building engineering services. The injection moulded slim profile produces a lightweight solution, enabling an easy fit installation into all types of wall or ceiling construction. Made from UV stable ABS and held closed by a snap friction catch. They can be over-painted to match the surrounding surface. Can be fastened easily into position with a suitable glue.1 x Arctic Hayes Access Panel 350 x 350mm
1 x ITL Insulated 1/2in Drive Deep Socket 11mm. The ITL Insulated 1/2in Deep Drive Sockets are fully insulated and exceeds international standards. They have a lifetime guarantee on both the tool and insulation. Each socket is manufactured from injection moulded nylon thermoplastic, and are 100% tested to IEC60900, Category C and ASTMF1505. They are designed to withstand extreme impact, abrasion, and are flame retardant. ITL tools are 100% tested using 1000 volts for 3 minutes submerged in water. They are Category C Impact Tested for operation within a greater temperature range -40ºF to ;158ºF, -40ºC to ;70ºC. 11mm
The Faithfull Industrial Dehumidifier removes excess moisture from humid air to limit mould, mildew and condensation. This powerful unit can extract up to 30 litres of water per day to create a healthier environment. Easy to operate touch pad with an LCD screen which displays temperature and humidity and indicates when the tank is full. A 24 hour timer function allows automatic start and stop times to be set. An automatic defrost function will activate if the room temperature drops too low. The unit will automatically shut off when the 7 litre tank is full. An optional continuous drainage function can direct water to a drain or suitable receptacle with the 1m pipe provided. It has a durable metal housing and heavy-duty wheels for easy manoeuvrability. Specifications: Power: AC 220-240V/50Hz.Humidity Extraction: 30L/D (27C RH60%).Water Tank Capacity: 7.0 litre.Air Volume: 300 m3/h.Working Space: 50-100m³.Max. Suction Pressure: 1.0Mpa.Max. Discharge Pressure: 2.5Mpa.Working Temperature: 5-35.Refrigerant: R920.Sound Level: 56dB.Product Size: 440 x 336 x 850mm.
Sikkens Cetol HLS Plus Translucent Woodstain is a low build, solvent-borne semi - gloss woodstain that can be used both as a base stain and as a finishing coat. It is highly translucent to bring out the beauty of woodgrain, it protects against mould and algae and is resistant to UV radiation, peeling and cracking. Cetol HLS Plus is also microporous and water-repellent It can be used as a finishing coat on exterior softwood and hardwood substrates such as cladding, fascias, soffits, rough sawn timber and fencing. As a base stain, Cetol HLS plus is readily absorbed into timber to provide a sound base for finishing coats. It can be used alone as a system on cladding, decking and garden furniture or as a base stain before the application of Cetol Filter 7 plus or Cetol THB plus on windows and doors. However it should not be used alone as a finish for hardwood timbers.The Sikkens SIKCHLSPLO1L Cetol HLS Plus Translucent Woodstain comes in the following:Colour: Light OakSize: 1 litre
1 x ITL Insulated Nut Spinner 6BA Nut Spinner (25mm Stud Clearance). The ITL Insulated Nut Spinners are made from injection moulded nylon 11, which exceeds the requirements of IEC 60900, the industry standard for live line working. In addition, this tool meets the requirements of Category 'C', which requires it to perform at extreme temperatures of -40°C to ;70°C, making it unique in this category. These insulated tools are the toughest in the market, being virtually indestructible. With a lifetime warranty on both the tool and insulation. 6BA Nut Spinner (25mm Stud Clearance)
