Search results for "underfloor"
John Guest Speedfit John Guest Speedfit Lockshield Radiator Valve 15mm
JG Speedfit lockshield radiator valve is used to switch off a radiator for installation or maintenance and can be used to balance radiators in the system so that they all heat up at the same rate. The JG Speedfit lockshield radiator valve is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works or tools. Lockshield radiator valve with a tamperproof cap Fast and simple tool-free connection Safe flame-free installation, with no hot works, glue or flux Grip & Seal collet with stainless steel teeth and main O-Ring seal Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe Suitable for central heating systems
£16.99
John Guest Speedfit John Guest Speedfit Release Aid 28mm (Pack Of 10)
JG Speedfit release aid allows a firmer grip on the collet when removing pipes. Designed, manufactured and assembled in the UK. Provides a firmer grip on the collet demounting pipe For use with Speedfit fittings
£11.99
Ronseal Ronseal Diamond Hard Floor Varnish Clear Matt 5 Litre
Ronseal Diamond Hard Floor Varnish gives floors Diamond Hard protection from shoes, scratches and spills, while highlighting the natural beauty of the wood. It only takes 30 minutes to dry and can cover up to 18m2 per litre. Plus, it�s low odour so your home won�t smell of varnish for days on end. To prepare unvarnished floors, start by sanding the floor using 120 grit sandpaper and go along the length of the boards. Make sure to wear a face mask and let the dust settle, then vacuum and wipe it down with white spirit. If you notice any holes or imperfections use Ronseal Multi Purpose Wood Filler to fill them in. To prepare varnished floors, check the condition. This depends what state the floor is in. If the old varnish is just in need of a refresh, give it a light sand with 120 grit sandpaper. Let the dust settle, then give it a vacuum and wipe it down with white spirit. If the floors aren�t in good condition or the varnish is flaking off, sand the floor back to bare wood using a floor sander. Give the varnish a really good stir and test the colour on a small patch to make sure you�re happy with it. Use a 4� brush and start in the corner furthest from the door. Work along the length of two floorboards at a time, just make sure you don�t get trapped in the corner. Wait two hours for the first coat to dry before applying another. For the best protection, you�ll need three coats. Before you start the third coat, very lightly sand along the length of your floorboards with 240 grit sandpaper. You won�t need a floor sander for this bit. Wipe the floor down with a damp cloth and then apply the third coat. Your floor will be ready to walk on in only two hours. Wait 24 hours before bringing your furniture back in. After 72 hours your floor will be diamond hard.Wait 24 hours before walking on the floor and 72 hours before bringing furniture back in.Directions: Sanding, cleaning, applying the varnish, drying for 2 hours between coats, and applying 3 coats for best protection
£99.99
Liberon Liberon Natural Finish Stone Floor Sealer 5 Litre
Liberon Natural Finish Stone Floor Sealer is a highly effective sealer for protecting interior terracotta, slate, York stone, ceramic, marble and many similar types of porous stone flooring. It is a water based product, and makes the surface resistant to water, stains, food oils and grease marks. It is ideal for use on new or old stone and is effective after just one coat on most surfaces. Natural Finish Stone Floor sealer is non-colouring, and maintains the natural look of the stone.Effective after just one coat on most surfaces. Coverage: 10-12m² per litreDrying time: 1 hour to touch, 24 hours finalApplication: BrushUsage: Interior.LIBNFSFS5L Natural Finish Stone Floor Sealer has a volume of 5 litres.
£78.99
Blackfriar Blackfriar Undercoat White 500Ml
A High Build Obliterating Undercoat for use on Wood, Metal, Plaster and all normal surfaces. It's ideal for both interior and exterior uses with easy application. Colour: White Size: 500ml
£14.74
Liberon Liberon Stone Floor Cleaner 1 Litre
Liberon Stone Floor Cleaner is ideal for removing built-up layers of dirt, grease and Liberon Stone Floor Shine from previously sealed and unsealed terracotta and natural stone flooring. It is water based and easy to use.Can be used neat on stubborn stains. Coverage: 15-20m² per litreDrying time: Minimum of 1 hourApplication: Cloth or mopUsage: InteriorLIBFCS1L Stone Floor Cleaner has a volume of 1 litre.
£22.99
Vileda Vileda 1-2 Spray Mop & Handle
The Vileda 1-2 Spray Mop is perfect for everyday spills in the home. The handle has a special compartment which can be filled with water or cleaning solution, then simply pull the trigger and a fine mist sprays from the bottom of the mop onto the floor. Simply spray and mop straight away, no need for a bucket. Fitted with a microfibre pad for efficient cleaning. Ideal for wood, laminate, tiled and vinyl flooring. The flat mop head is ideal for larger floors with a pivot head to reach under furniture. Easy to use. Machine washable pad.
£43.99
McAlpine McAlpine 800mm Vinyl Channel Drain - CD800-VL
McAlpine 800mm Channel Drain for Vinyl Flooring in Stainless Steel
£658.49
John Guest Speedfit John Guest Speedfit Cold Water Service Plug 32mm
JG Speedfit cold water service plug for plugging unused ports on a Speedfit MDPE push-fit fitting. Designed, manufactured and assembled in the UK. Compatible with MDPE pipes only Suitable for cold water use only
£5.49
Blackfriar Blackfriar Undercoat Grey 500Ml
A High Build Obliterating Undercoat for use on Wood, Metal, Plaster and all normal surfaces. It's ideal for both interior and exterior uses with easy application. Colour: Grey Size: 500ml
£14.74
Forgefix Forgefix Forgefast Torx Compatible Flooring Mdf Chipboard Screw 4.2 X 55Mm Box 200
The ForgeFast Elite Performance MDF & Chipboard Flooring Screw is specifically designed for fixing flooring grade boards to timber structures. The double cutting point breaks through the hard, dense surface of flooring grade materials. The anti-split, fast start thread can then engage quickly to form a rapid pick-up at the start of insertion. Reduced drive torque and no pre-drilling mean quick installations, whilst the fix remains firm with improved pull-out. The Under head ribs are designed for self-countersinking producing a flush secure finish on flooring. Double cutting point reduces splitting and drive time and is capable of penetrating 0.8mm steel. A firmer fix with reduced drive torque and improved pull-out provided by a serrated cutting thread. Improved holding power from the reinforced countersunk neck. Improved countersinking from the ribbed head. TORX® compatible insert for a higher transmission of power. CE approved for use in load-bearing timber construction. Molecular lubrication. Elementech 400 surface coating provides corrosion resistance. Salt spray tested to 400 hours. A Non-Cr, Cr3+, yellow/zinc plated surface is environmentally friendly. Lasts up to 6 times longer than standard zinc screw protective coating. Suitable for interior use.
£14.49
Blackfriar Blackfriar Undercoat Grey 250Ml
A High Build Obliterating Undercoat for use on Wood, Metal, Plaster and all normal surfaces. It's ideal for both interior and exterior uses with easy application. Colour: Grey Size: 250ml
£11.03
