Bondloc B577 Pipe Seal With Teflon 50Ml

Description

Bondloc B577 Pipe Seal is a high viscosity thixotropic gel paste which cures rapidly, sealing instantly to 10 bar through its Anaerobic cure system in contact with metals in the absence of air (oxygen). When fully cured it resists pressure up to 350 bar. B577 is not suitable for oxygen systems. Good chemical/solvent resistance to Ethanol, Motor Oil, Unleaded Petrol, Acetone and Brake Fluid.

Typical applications are in sealing of all types of threaded connections against water, oil, gases and most common materials conveyed by pipes.

Specification:

Resin: Dimethacrylate.
Colour: Yellow.
Cure Speed with Activator: <10 minutes.
Cure Speed without Activator: <15 mins @ 20°C.
Viscosity: >50,000 cps.
Gap Fill: 0.05mm to 0.4mm.
Flash Point: >100°C.
Shelf Life: 12 months @ 20°C.
Specific Gravity: 1.09.
Max. Operating Temperature: +150°C.

Cured Performance:

Full Cure Time: 6-12 hours.
Typical Breakaway Strength: >6 to <15 N/mm (2).
Prevailing Torque: >3 to < 9 N/mm (2).
Static Shear Strength: >5 to <15 N/mm (2).

Size: 50ml.

Bondloc B577 Pipe Seal With Teflon 50Ml

Product form

£16.49 Incl. VAT

    • Shipped today? Order within: Jul 27, 2024 14:00:00 +0100
    • Free UK Shipping No Minimum Spend*
    • 5 Star Reviews Across All Our Retail Channels
    • Multiple Secure Payment Options
    • 100% Genuine Products
    Delivery

    Next Day Delivery available Monday - Friday when you order by 2pm.

    We take delivery very seriously. You can find the UK delivery time for any of our products on the relevant product page. These vary based on complexity of shipping, size/value of the item and the service used. These times are a guideline - however, in well over 99% of cases (and rising), we achieve or beat them.

    DELIVERY PRICES

    We offer free delivery throughout mainland UK and Northern Ireland. *This excludes certain items that are difficult to ship and some special offers. ‘Mainland UK’ is defined by the delivery area set by our couriers - although geographically belonging to the mainland we do have to charge a delivery fee to some parts of the Scottish Highlands and other outer lying areas given the increased costs charged by couriers for despatch to these areas. We do however attempt to keep these costs to our customers as low as possible.

    *Please note - this may vary for non-mainland UK addresses. You can always check the delivery cost of an order by adding items to your shopping cart and using the ‘Estimate Shipping & Tax’ tool.

    To find out more about delivery prices/methods please click here.

    Returns & Refunds

    We know that you will be pleased with your purchases from Trade Hut Direct however, there may be occasions when you will need to return items to us. If you wish to do so, please thoroughly read our returns policy and complete the returns form here.

    Important - if your return qualifies for a refund of the return carriage costs, please be aware that the maximum we can refund is £6. If the return costs are going to be more than this, please call our customer service team who should be able to arrange an alternative solution.

    To find out more about returns and refunds please click here.

    Payments

    We accept all major credit/debit cards.

    If you have any questions relating to placing an order, how to pay or issues with checking out please contact our customer service team on 0800 994 9992.

    SKU: BONB57750
    Barcode: 5005775050057

    Description

    Bondloc B577 Pipe Seal is a high viscosity thixotropic gel paste which cures rapidly, sealing instantly to 10 bar through its Anaerobic cure system in contact with metals in the absence of air (oxygen). When fully cured it resists pressure up to 350 bar. B577 is not suitable for oxygen systems. Good chemical/solvent resistance to Ethanol, Motor Oil, Unleaded Petrol, Acetone and Brake Fluid.

    Typical applications are in sealing of all types of threaded connections against water, oil, gases and most common materials conveyed by pipes.

    Specification:

    Resin: Dimethacrylate.
    Colour: Yellow.
    Cure Speed with Activator: <10 minutes.
    Cure Speed without Activator: <15 mins @ 20°C.
    Viscosity: >50,000 cps.
    Gap Fill: 0.05mm to 0.4mm.
    Flash Point: >100°C.
    Shelf Life: 12 months @ 20°C.
    Specific Gravity: 1.09.
    Max. Operating Temperature: +150°C.

    Cured Performance:

    Full Cure Time: 6-12 hours.
    Typical Breakaway Strength: >6 to <15 N/mm (2).
    Prevailing Torque: >3 to < 9 N/mm (2).
    Static Shear Strength: >5 to <15 N/mm (2).

    Size: 50ml.

    Recently viewed products

    Login

    Forgot your password?

    Don't have an account yet?
    Create account