The DEWALT DCK264P2T XR Nailer Twin Pack, contains the following: 1 x 18V DCN660 Cordless XR Brushless Second Fix Nailer has a compact, lightweight and ergonomic design makes the tool easy and comfortable to use, but durable enough for the worksite environment. The depth of drive can be easily adjusted using the handy thumb wheel depth adjuster. Specifications: Nail Diameter: 1.6mm.Nail Length: 32 - 63mm.Magazine Angle: 20 degree.Magazine Capacity: 110 Nails.Weight: 2.7kg. 1 x 18V DCN692 Cordless XR Framing Nailer with two speeds to optimise the nailer for firing all lengths of nails. With brushless motor technology for excellent power and tool-free jam clearance to minimise down time. Suitable for many applications, including stud wall insulation, roofing, floor board and cladding installation etc. Specifications: Nail Diameter: 2.8-3.3mm.Nail Length: 50-90mm.Magazine Capacity: up to 55 nails.Firing Mode: Bump and Sequential.Weight: 4.1kg. 1 x 10.8-18V DCB115 Multi-Voltage XR Charger. Also supplied with 2 x 18V 5.0Ah Li-ion Batteries and 1 x TSTAK Mobile Storage Box.
The DEWALT DCK2104L2T XR Brushless Twin Pack, contains the following: 1 x 12V DCF801 XR Brushless Sub-Compact Impact Driver with 3 electronic speeds for greater control when working on precise applications. Precision Drive mode is ideal for fine screw work, preventing the screw head or material from being damaged. Compatible with existing 10.8V and 12V slide on batteries. No Load Speed: 0-950/0-1,950/0-2,850/min.Impact Rate: 0-3,600/bpm.Max. Torque: 163Nm.Weight: 0.8kg. (1.76lbs). 1 x 12V DCH072 XR SDS Plus Hammer Drill, a brushless motor for improved run time, and durability. Ideal for drilling anchors, and fixing holes into concrete, brick and masonry. The drill has an ultra-compact design with overmoulded handle and grip areas to enhance grip, and comfort. There is also a bright, white LED with a delay feature for improved visibility. No Load Speed: 910/min.Impact Rate: 4,280/bpm.Impact Energy: 1.1 joules.Capacity: Concrete 14mm, Wood 13mm, Metal 10mm.Weight: 1.7kg (without battery). (3.75lbs). Also supplied with: 2 x 12V 3.0Ah Li-ion Batteries, 1 x Multi-Voltage XR Charger & 1 x TSTAK Kit Box.
The DEWALT DCK2102L2T XR Brushless Twin Pack, contains the following: 1 x 12V DCD706 XR Brushless Sub-Compact Combi Drill has an extremely compact design, with a length of 168mm, allowing you to get into even smaller tight spaces. The Drill has a 15 position adjustable torque control for consistent screwdriving, into a wide variety of materials. Chuck: 10mm Keyless.No Load Speed: 0-425/0-1,500/min.Impact Rate: 25,500/bpm.Max. Torque: 57.5Nm, 15 Settings.Capacity: Masonry/Steel 10mm, Wood 20mm.Weight: 1.2kg. (2.65lbs). 1 x 12V DCH072 XR SDS Plus Hammer Drill has a brushless motor for improved run time and durability. Ideal for drilling anchors, and fixing holes into concrete, brick and masonry. The Hammer Drill has an ultra-compact design with overmoulded handle and grip areas to enhance grip and comfort. There is also a bright, white LED with a delay feature for improved visibility. No Load Speed: 910/min.Impact Rate: 4,280/bpm.Impact Energy: 1.1 joules.Capacity: Concrete 14mm, Wood 13mm, Metal 10mm.Weight: 1.7kg (without battery) (3.75lbs). Also supplied with: 2 x 12V 3.0Ah Li-ion Batteries, 1 x Multi-Voltage XR Charger & 1 x TSTAK Kit Box.
The DEWALT DCK2052H2 POWERSTACK Twin Kit, contains the following: 1 x 18V DCD999 XR XRP Combi Drill with FlexVolt ADVANTAGE technology. This unique electronic module features pack identification technology. This enables the tool to recognise when an XR FLEXVOLT battery is attached and can unlock even more power. A foot LED with delay feature, provides improved visibility and flashlight functionality. Chuck Capacity: 1.5-13mm.No Load Speed: 0-500/1,500/2,250/min.Impact Rate: 38,250/bpm.Max. Torque: 67Nm.Max. Drilling Capacity: Metal 15mm, Wood 55mm, Masonry 13mm.Weight: 1.6kg (without battery). 1 x 18V DCF850 XR Brushless Impact Driver comes with a 3 mode switch for enhanced control including Precision Drive which prevents damage to the material and fastener in smaller jobs. POWERSTACK batteries deliver 50% more power with a 25% smaller footprint and work with all DEWALT 18V XR tools. Bit Holder: 6.35mm (1/4in).No Load Speed: 0-1,000/2,800/3,250/min.Impact Rate: 3,800/bpm.Max. Torque: 205Nm.Weight: 0.9kg. Also supplied with: 1 x DCB1104 Charger, 2 x 18V POWERSTACK Li-ion Batteries 5.0Ah & 1 x TSTAK Heavy-duty Kitbox.
The DEWALT DCK2532P2 XR Brushless Twin Pack contains the following: 1 x 18V DCH273 XR Brushless SDS Plus 3-Mode Hammer is fitted with an electronic clutch for consistently high torque and improved durability. Ideal for drilling anchors and fixing holes into concrete. Modes: Rotary, SDS Hammer, Chisel OnlyNo Load Speed: 0-1,100/min.Impact Rate: 0-4,600/bpmImpact Energy: 2.1 joulesCapacity: Masonry: 24mm, Metal: 13mm, Wood: 26mmWeight: 3.1kg 1 x 18V DCD796 XR Brushless Combi Drill has an ultra-compact, lightweight design. The 2-speed all-metal transmission provides increased run time and longer tool life. It offers a 15 position adjustable torque control for consistent screwdriving. Chuck: 13mm KeylessNo Load Speed: 0-550/0-2,000/min.Impact Rate: 0-9,350/34,000/bpmTorque: 27/70Nm, 15 SettingsCapacity: Masonry/Steel 13mm, Wood 40mm 1 x 10.8-18V DCB115 XR Multi-Voltage Charger has a compact size, making it easy to store and it is also wall mountable. A bright LED indicator communicates the battery charge status: charged, charging, power problem, and battery too hot or too cold conditions. It is capable of charging a 2.0Ah battery pack in 30 minutes. Voltage: 10.8/14.4/18VBattery Chemistry: Li-ionCharging Current: 4.0 A Also supplied with 2 x 18V 5.0Ah Li-ion Batteries and 1 x TSTAK Deep Toolbox.
The DEWALT DCK2070M2T XR Brushless Twin Pack contains the following: 1 x 18V DCD709 XR Compact Brushless Hammer Drill with 15 position adjustable torque control for consistent screw driving into a variety of materials. An efficient brushless motor delivers high performance, extends tool life and allows for a much shorter design. Chuck: 13mm KeylessNo Load Speed: 0-450/0-1,650/min.Max. Torque: 26Nm, 15 SettingsCapacity: Wood 30mm, Metal/Masonry 13mmWeight: 1.2kg 1 x 18V DCH133 Brushless 26mm SDS-Plus Hammer Drill with a rotation stop mode for light chiselling in plaster, tiles and render and impact stop mode for rotary only drilling in wood and metal. Its compact, lightweight and ergonomic design improves comfort and support during extended operating periods. Modes: Rotation Stop, Impact StopNo Load Speed: 0-1,500/min.Impact Rate: 0-5,500/min with 2.6 joulesCapacity: Concrete 26mm, Steel 13mm, Wood 30mmWeight 2.3kg Also supplied with: 2 x 18V 4.0Ah Li-ion Batteries, 1 x 10.8-18V DCB105 XR Multi-Voltage Li-ion Charger and 1 x TSTAK Kit Box
The DEWALT DCK2052H1 Twin Kit contains the following: 1 x 18V DCD999 XR XRP Combi Drill comes with FlexVolt ADVANTAGE technology. This unique electronic module features pack identification technology. This enables the tool to recognise when an XR FLEXVOLT battery is attached and to then unlock even more power. A foot LED with delay feature, provides improved visibility and flashlight functionality. Chuck Capacity: 1.5-13mm.No Load Speed: 0-500/1,500/2,250/min.Impact Rate: 38,250/bpm.Max. Torque: 67Nm.Max. Drilling Capacity: Metal 15mm, Wood 55mm, Masonry 13mm.Weight: 1.6kg (without battery). 1 x 18V DCF850E2T XR Brushless Impact Driver comes with a 3 mode switch for enhanced control including Precision Drive which prevents damage to the material and fastener in smaller jobs. POWERSTACK batteries deliver 50% more power with a 25% smaller footprint and they work with all DEWALT 18V XR tools. Bit Holder: 6.35mm (1/4in).No Load Speed: 0-1,000/2,800/3,250/min.Impact Rate: 3,800/bpm.Max. Torque: 205Nm.Weight: 0.9kg. It is supplied with: 1 x 18V POWERSTACK Li-ion Batteries 1.7Ah. 1 x 18V POWERSTACK Li-ion Batteries 5.0Ah. 1 x DCB1104 Charger. 1 x TSTAK Heavy-duty Kitbox.
The DEWALT DCK2050H2 POWERSTACK Twin Pack contains the following: 1 x 18V DCD805 XR Brushless G3 Combi with an ultra-compact, lightweight design for use in confined spaces, with enhanced pivoting LED, positioned on the foot, offers greater visibility in dark, and confined spaces. Chuck: 13mm.No Load Speed: 0-650/2,000/min.Impact Rate: 34,000/bpm.Max. Torque: 90Nm.Capacity: Steel 13mm, Masonry 13mm, Wood 55mm. 1 x 18V DCF850 XR Brushless Impact Driver with a 3 mode switch for enhanced control, including Precision Drive which prevents damage to the material, and fastener in smaller jobs. Bit Holder: 6.35mm (1/4in).No Load Speed: 0-1,000/2,800/3,250/min.Impact Rate: 3,800/bpm.Max. Torque: 205Nm.Weight: 0.9kg. 2 x 18V 5.0Ah POWERSTACK Li-ion Batteries. POWERSTACK batteries deliver 50% more power with a 25% smaller footprint, and work with all DEWALT 18V XR tools. Also supplied with: 1 x Multi-Voltage Charger 10.8-18V Li-ion and 1 x TSTAK II Toolbox.
The DEWALT DCK2050E2T XR Brushless POWERSTACK Twin Kit contains the following: 1 x 18V DCD805E2T XR Brushless G3 Combi with an ultra-compact, lightweight design for use in confined spaces. An enhanced pivoting LED positioned on the foot offers greater visibility in dark and confined spaces. POWERSTACK batteries deliver 50% more power with a 25% smaller footprint and work with all DEWALT 18V XR tools. Chuck: 13mmNo Load Speed: 0-650/2,000/min.Impact Rate: 34,000/bpmMax. Torque: 90NmCapacity: Steel 13mm, Masonry 13mm, Wood 55mmWeight: 1.3kg 1 x DCF850 XR Brushless Impact Driver with a 3 mode switch for enhanced control. POWERSTACK batteries deliver 50% more power with a 25% smaller footprint and work with all DEWALT 18V XR tools. Bit Holder: 6.35mm (1/4in)No Load Speed: 0-1,000/2,800/3,250/min.Impact Rate: 3,800/bpmMax. Torque: 205NmWeight: 0.9kg 2 x 18V 2.0Ah Li-ion XR POWERSTACK Slide Batteries. 25% smaller and 15% lighter than the DEWALT DCB183 18V XR 2.0Ah battery, making it easier to use in tight workspaces. Stacked pouch cell battery technology provides a low impedance construction, meaning that the rate of flow of electrons is much higher thanks to the innovative internal pouch battery connectors and electrodes, providing a greater surface area vs a traditional cylindrical battery cell type. It also benefits from superior thermal performance vs cylindrical batteries. This increases battery durability, improves the cycle life and results. Also comes with 1 x TSTAK Kitbox.
DEWALT DWST83529-1 TOUGHSYSTEM 2.0 Drawer Unit with ball bearing drawer sliders for smooth operation and durability. Name panel inserts allow the drawers to be labelled for easy identification of contents. Fitted with strong, ergonomic handles for more comfortable transportation. Auto Stacking Latches are intuitive and easy to use, allowing TOUGHSYSTEM modules to be connected together. These newer style latches are compatible with older TOUGHSYSTEM modules. It also offers half-module compatibility, half-width modules can be connected to the unit. Specification: Max. Load (per drawer) 10kgWidth: 535mmLength: 330mmHeight: 305mm
The DEWALT DWST83541-1 Soft Tool Organiser features multiple pockets for maximum organisation and easy access to tools. Its sturdy, waterproof plastic base enables the bag to stand on its own when placed on the floor and protects bag contents from water, moisture and dirt. Made from 1680 denier ballistic nylon with rivet enforcements. This durable construction provides maximum strength and resistance from wear and tear. Fitted with a padded shoulder strap and rubber carry handle for added comfort. Other features include a metal tape holder, hammer holder and an electrical tape strip. Compatible with DEWALT TSTAKaccessory cases. Can be stacked on these cases for easy transportation. Load Capacity: 10.18kg
The DEWALT TOUGHSYSTEM 2.0 Compact Tool Bag has over 25 pockets, and a front bungee cord allowing vertical storage of power tools, hand tools, and other items. Comfortable and easy to carry thanks to its padded, adjustable shoulder strap. Constructed from durable 1680D fabric which is dirt-repellent. The bag is fitted with a waterproof base, making it ideal for any work environment, and can be stacked with any other TOUGHSYSTEM 2.0 product. Specifications: Max Load: 18kg.Dimensions (L x H): 30 x 38cm.
The DEWALT TOUGHSYSTEM 2.0 Tool Bag features over 50 pockets, and a top bungee cord allowing for vertical storage of large power tools, hand tools, and other jobsite necessities. It can be accessed from any side for maximum convenience. Constructed from durable 1680D fabric which is dirt-repellent. The bag is fitted with a waterproof base, making it ideal for any work environment, and can be stacked with any other TOUGHSYSTEM 2.0 product. Specifications: Max Load: 34kg.Dimensions (L x H): 38 x 33cm.
The DEWALT TOUGHSYSTEM 2.0 Toolboxes feature a high-performance seal in the lid, this ensures they are dust-tight and waterjet resistant (IP65) to withstand the most severe weather. With easy close, metal wire front latches for easy one-handed operation. A metal-reinforced padlock eye provides increased security. Fitted with strong, ergonomic handles for more comfortable transportation. Auto Stacking Latches are intuitive and easy to use, allowing TOUGHSYSTEM modules to be connected together. These newer style latches are compatible with older TOUGHSYSTEM modules. DEWALT Tracker compatible, an internal fixing point allows the DEWALT Tracker to be installed and the box tracked via the DEWALT Tool Connect App. There is also a handy name panel insert, this allows boxes to be labelled for easy identification. This DEWALT TOUGHSYSTEM 2.0 Toolbox Kit contains the following: 1 x DS166 TOUGHSYSTEM 2.0 Toolbox1 x DS300 TOUGHSYSTEM 2.0 Toolbox1 x DEWALT DS400 TOUGHSYSTEM 2.0 Toolbox1 x TOUGHSYSTEM Trolley
The DEWALT DS100 TOUGHSYSTEM 2.0 Toolbox features a high-performance IP65 lid seal which is dust-tight and waterjet resistant. It has 10 removeable deep cups (8 single and 2 double) and a clear polycarbonate lid that provides easy visibility to contents without having to open it. The toolbox is fitted with a strong, ergonomic handle and easy close, metal wire front latches for easy one-handed operation. Auto Stacking Latches are intuitive and easy to use, allowing TOUGHSYSTEM modules to be connected together. These newer style latches are compatible with older TOUGHSYSTEM modules. Specification: Size: 370 x 550 x 130mmWeight: 1.2kg
The Bosch L-BOXX Carry Case is made from robust, durable ABS plastic. Fitted with a click mechanism that allows stacked boxes to be easily opened for convenient handling. They can be customised to carry various tools thanks to interchangeable tool inlays. Improved storage and transportation within the Bosch Mobility System.The Bosch 136 L-BOXX Carry Case has an additional front handle for carrying the box close to the body. Suitable for all types of power tools. Specification: Top Load Capacity: 100kgIn-box Load Capacity: 25kgOuter Dimensions (width x length x height): 442 x 357 x 151mmWeight: 1.9kg
The Bosch L-BOXX Carry Case is made from robust, durable ABS plastic. Fitted with a click mechanism that allows stacked boxes to be easily opened for convenient handling. They can be customised to carry various tools thanks to interchangeable tool inlays. Improved storage and transportation within the Bosch Mobility System.The Bosch 102 L-BOXX Carry Case has an additional front handle for carrying the box close to the body. Suitable for all types of power tools. Specification: Top Load Capacity: 100kgIn-box Load Capacity: 25kgOuter Dimensions (width x length x height): 442 x 357 x 117mmWeight: 1.8kg
The Bott Verso Maintenance Trolley has a welded steel construction with a durable powder coat paint finish in RAL 7035 light grey and RAL 5010 gentian blue. Fitted with a push/pull handle and 125mm diameter castors, it can be easily moved and transported throughout the workplace as and when required. Comes with a 30mm multiplex wood top.This Bott Verso Mobile Cabinet has 6 100% extension drawers with drawer blocking. Specification: Drawer Configuration: 3 x 100mm, 2 x 125mm, 1 x 175mm (50kg U.D.L.)Overall Dimensions (WxDxH): 1050 x 600 x 980mm
The Bott Verso Maintenance Trolley has a welded steel construction with a durable powder coat paint finish in RAL 7035 light grey and RAL 5010 gentian blue. Fitted with a push/pull handle and 125mm diameter castors, it can be easily moved and transported throughout the workplace as and when required. Comes with a 30mm multiplex wood top.This Bott Verso Maintenance Trolley has 5 100% extension drawers with drawer blocking. The cupboard section has a single, reinforced, door and 1 galvanised steel shelf (75kg U.D.L.). Specification: Drawer Configuration: 2 x 100mm, 3 x 175mm (50kg U.D.L.)Overall Dimensions (WxDxH): 1,050 x 600 x 980mm
The Bott Verso Mobile Cabinet has a welded steel construction with a durable powder coat paint finish in RAL 7035 light grey and RAL 5010 gentian blue. It is fitted with a push/pull handle and 125mm diameter castors, allowing easy transport throughout the workplace as and when required. Supplied with a top tray section and mat.This Bott Verso Mobile Cabinet has 6 x 100% extension drawers with drawer blocking. Specification: Drawer Configuration: 2 x 100mm, 3 x 175mm (50kg U.D.L.)Overall Dimensions (WxDxH): 800 x 550 x 965mm
The Bott Verso Mobile Cabinet has a welded steel construction with a durable powder coat paint finish in RAL 7035 light grey and RAL 5010 gentian blue. It is fitted with a push/pull handle and 125mm diameter castors, allowing easy transport throughout the workplace as and when required. Supplied with a top tray section and mat.This Bott Verso Mobile Cabinet has 5 x 100% extension drawers with drawer blocking. Specification: Drawer Configuration: 2 x 100mm, 3 x 175mm (50kg U.D.L.)Overall Dimensions (WxDxH): 800 x 550 x 965mm
The Bott Verso Hazardous Substance Cupboard provides safe and secure HSE compliant storage for hazardous substances and materials in the workplace. It features a robust, welded steel housing with safety labelling in accordance with BS EN ISO 10:2012&A5:2015.Finished in durable powder coat paint in RAL 1023 yellow.This Bott Verso Hazardous Substance Cupboard is fitted with double, reinforced doors with 4 adjustable height, steel trays (75kg U.D.L.). Overall Dimensions (WxDxH): 1,050 x 550 x 2,000mm
The Bott Verso Hazardous Substance Cupboard provides safe and secure HSE compliant storage for hazardous substances and materials in the workplace. It features a robust, welded steel housing with safety labelling in accordance with BS EN ISO 10:2012&A5:2015.Finished in durable powder coat paint in RAL 1023 yellow.This Bott Verso Hazardous Substance Cupboard is fitted with a single, reinforced door and 2 adjustable height, steel trays (75kg U.D.L.). Overall Dimensions (WxDxH): 525 x 350 x 800mm
The Bahco BE-9884 ERGO Screwdrivers, in a set of 6, have been developed according to the scientific ERGO process. The high-performance alloy steel blade has been chrome plated and entirely hardened for high protection against corrosion, a long life tool. A black oxide tip provides higher accuracy.A three-component handle provides maximum user comfort. The soft material with ridged surface provides superior grip and greater force transmission. A flat face prevents the screwdriver from rolling away. It is easy to choose the right tip, thanks to the colour-coded handle and permanent symbol on the domed end. This set of 6 contains: 2 x Slotted Screwdrivers: 4.0 x 100mm and 5.5 x 125mm. 2 x Phillips Screwdrivers: PH1 x 75mm and PH2 x 100mm. 2 x Pozidriv Screwdrivers: PZ1 x 75mm and PZ2 x 100mm.
