The DEWALT DCK699M3T XR 6 Piece Kit, contains the following: 1 x 18V DCD795 Brushless Compact Hammer Drill has a lightweight, compact design for use in confined spaces. With 2-speed, all-metal transmission and LED work light. Chuck: 13mm.No Load Speed: 0-600/0-2,000/min.Impact Rate: 0-10,200/0-34,000/min.Max Torque: 60Nm.Capacity: Wood: 38mm, Steel: 13mm, Masonry: 13mm 1 x 18V DCF887 Brushless Impact Driver with brushless motor technology, aluminium front housing and an ergonomic handle. 3 LEDs provide work piece illumination. With 'drop in' keyless hex driver for a quick, one-handed fitment. Bit Holder: 6.35mm (1/4in).No Load Speed: 0-1,000/0-2,800/0-3,250/Min.Impact Rate: 0-1,800/0-2,900/0-3,800/bpm.Max Torque: 26/80/205Nm. 1 x 18V DCH253 SDS Hammer Drill is ideal for drilling anchors and fixing holes into concrete, brick and masonry from 4mm to 24mm. Has a rotation stop mode for light chiselling in plaster, tiles and render and an impact stop mode for rotary only drilling in wood and metal. No Load Speed: 0-1,200/min.Impact Rate: 0-4,500/min with 2.1 Joules.Capacity: Concrete: 24mm, Steel: 13mm, Wood: 26mm.Weight 3.1kg. 1 x 18V DCS331 Jigsaw has a keyless blade change and intelligent variable speed trigger. Accepts T-shank blades. Strokes at No Load: 0-3,000/min.Levels of Pendulum Stroke: 4.Stroke Length: 26mm.Capacity: Wood: 135mm, Metal: 10mm. 1 x 18V DCS391 Circular Saw with an intelligent trigger allowing total control over all applications. It has a powerful and highly efficient PM58 fan cooled motor with replaceable brushes, which delivers up to 3,700 rotations per minute for a fast cutting action. No Load Speed: 3,700/min.Max Cutting Depth: @90°: 55mm, @45°: 55mm.Blade: 165 x 20mm bore.Weight: 3.8kg. 1 x 18V DCL040 LED Pivot Light has a compact, lightweight design with impact resistant housing and improved ergonomic design and rubber grip for increased comfort. The LED Bulb produces 110 Lumen output (10,000Hr Life) with a 2 zone light pattern. The flashlight head pivots more than 90º vertically with ratchet lock. 1 x 10.8-18V DCB115 XR Multi-Voltage Charger has a compact size, making it easy to store and it is also wall mountable. A bright LED indicator communicates the battery charge status: charged, charging, power problem, and battery too hot or too cold conditions. It is capable of charging a 2.0Ah battery pack in 30 minutes. Supplied with 3 x 18V 4.0Ah Li-ion Batteries and 2 x DWST1-71195 TSTAK™ Deep Toolboxes.
The DEWALT DCK694T3 Brushless 6 Piece Kit, contains the following: 1 x 18V DCD996 XR Brushless Combi Drill with a tough 3 speed all-metal transmission for increased run time and a longer tool life. Electronic Clutch with 11 position adjustable torque control for optimised precision when screwdriving. It also has an improved 3 position LED torch with high/medium/low settings. Chuck: 13mm KeylessNo Load Speed: 0-450/0-1,300/0-2,000/min.Impact Rate: 0-8,600/0-25,500/0-38,250/bpmMax. Torque: 95Nm, 11 SettingsCapacity: Wood 55mm, Steel 15mm, Masonry 16mmWeight: 2.1kg 1 x 18V DCF887 XR Brushless Impact Driver is equipped with application control. This is achieved through 3 motor speeds and torque settings. Precision Drive mode offers additional control in screwdriving applications to avoid material and fastener damage. It has a super lightweight and compact design. Bit Holder: 6.35mm (1/4in)No Load Speed: 0-1,000/0-2,800/0-3,250/min.Impact Rate: 0-1,800/0-2,900/0-3,800/bpmMax Torque: 26/80/205NmWeight: 1.56kg 1 x 18V DCS391 Premium Circular Saw with an intelligent trigger allowing total control over all applications. It has a powerful and highly efficient PM58 fan cooled motor with replaceable brushes, which delivers up to 5,150 rotations per minute for a fast cutting action. It has a spindle lock for quick and easy blade change. No Load Speed: 5,150/min.Max. Cutting Depth: @90° 55mm, @45° 42.1mmBlade: 165 x 20mm BoreWeight: 3.8kg 1 x 18V DCG412 XR Premium Angle Grinder has a powerful fan cooled motor and intelligent variable speed trigger and lock-off switch for enhanced work safety and control. It features XR Lithium-ion Technology and is part of the intelligent XR Lithium-ion Series designed for efficiency and making applications faster. No Load Speed: 7,000/min.Disc Diameter: 125mmSpindle: M14Weight: 3.0kg 1 x 18V DCS331 XR Premium Jigsaw is designed for efficiency and has a powerful and highly efficient DEWALT PM47 fan-cooled motor with replaceable brushes. The intelligent variable speed trigger and lock-off switch ensure quick controlled cuts and enhanced work safety. Quick and easy, patented keyless blade change system accepts T-shank blades. Strokes at No Load: 0-3,000/min.Stroke Length: 26mmCapacity: Wood 135mm, Metal 10mmWeight: 3.1kg 1 x 18V DCL040 XR Torch is the latest generation work light, using LED Technology. Compact, lightweight design with impact resistant housing and improved ergonomic design and rubber grip for increased comfort. The LED bulb produces 110 lumen output (10,000 hr life) with a 2 zone light pattern. The flashlight head pivots more than 90º vertically with a ratchet lock. Also supplied with: 3 x 18/54V 6.0/2.0Ah FlexVolt Li-ion Batteries, 1 x DCB118 Multi-Voltage Charger, 2 x DS300 TOUGHSYSTEM™ Toolboxes
The DEWALT DCK694P3 Brushless 3 Speed 6 Piece Kit, contains the following: 1 x 18V DCD995 Brushless XRP Hammer Drill with a tough three speed all metal transmission for increased runtime and longer tool life. Part of the intelligent XR Lithium Ion Series designed for efficiency and faster applications. Chuck: 1.5-13mm. No Load Speed: 0-450/0-1,300/0-2,000/min. Impact Rate: 0-7,650/0-22,100/0-34,000/min. Max Torque: 80Nm. Drilling Capacity Wood: 50mm, Steel: 13mm,Masonry: 16mm. 1 x 18V DCF886 Brushless Impact Driver with brushless motor technology, aluminium front housing and an ergonomic handle. 3 LEDs provide work piece illumination. With 'drop in' keyless hex driver for a quick, one-handed fitment. Bit holder: 6.35mm (1/4in) hex.No Load Speed: 0-2,800/min.Impacts Per Minute: 0-3,200/bpm.Max Torque: 165Nm.Capacity: Bolt M12. 1 x 18V DCS391 Circular Saw with an intelligent trigger allowing total control over all applications. It has a powerful and highly efficient PM58 fan cooled motor with replaceable brushes, which delivers up to 3,700 rotations per minute for a fast cutting action. No Load Speed: 3,700/min.Max Cutting Depth: @90°: 55mm, @45°: 55mm.Blade: 165 x 20mm bore.Weight: 3.8kg. 1 x 18V DCG412 Grinder has a powerful fan cooled motor and intelligent variable speed trigger and lock-off switch for enhanced work safety and control. No Load Speed: 7,000/min.Disc Diameter: 125mm, M14 Spindle.Weight: 3.0kg. 1 x 18V DCS331 Jigsaw has a keyless blade change and intelligent variable speed trigger. Accepts T-shank blades. Strokes at No Load: 0-3,000/min.Levels of Pendulum Stroke: 4.Stroke Length: 26mm.Capacity: Wood: 135mm, Metal: 10mm. 1 x 18V DCL040 LED Pivot Light has a compact, lightweight design with impact resistant housing and improved ergonomic design and rubber grip for increased comfort. The LED Bulb produces 110 Lumen output (10,000Hr Life) with a 2 zone light pattern. The flashlight head pivots more than 90º vertically with ratchet lock. 1 x 10.8-18V DCB105 Multi-Voltage XR Charger varies the charge rate according to battery type to increase battery pack life. It features diagnostics with bright LED indicator which communicates the battery charge status: charged, charging, power problem, and battery too hot or too cold. Charges all XR Li-ion DEWALT Slide Pack 10.8, 14.4, and 18V batteries. Supplied with 3 x 18V 5.0Ah Li-ion Batteries and 2 x DS300 TOUGHSYSTEM™ Toolboxes
The DEWALT DCK665P3T XR Compact Wood Working Kit, contains the following: 1 x 18V DCD796 XR Brushless Compact Hammer Drill Driver has an ultra compact, lightweight design. The two speed all metal transmission provides increased runtime and longer tool life. It offers a 15 position adjustable torque control for consistent screwdriving. Chuck: 13mm Keyless.No Load Speed: 0-550/0-2,000/min.Impact Rate: 0-9,350/34,000/bpm.Max Torque: 27/70Nm, 15 Settings.Capacity: Steel: 13mm, Masonry: 13mm, Wood: 40mm.Weight: 1.3kg. 1 x 18V DCP580 XR Brushless Planer has a powerful brushless motor that provides a smooth planning performance combined with extended run time. With on-board blade storage and Torx key enable fast blade change, minimising downtime. With a large front and rear shoe for improved stability. It is compatible with the AirLock dust extraction system. No Load Speed: 15,000/Min.Maximum Depth of Cut: 2mm.Rebating Depth: 9mm.Planer Width: 82mm.Weight: 2.5kg. 1 x 18V DCS355 XR Cordless Oscillating Multi-Tool delivers up to 57% more run time over brushed motors. It uses the quick-change accessory system that allows blades and attachments to be changed quickly without the use of tools. No Load Speed: 0-20,000/min. Length: 310mm.Weight: 1.06kg. 1 x 18V 165mm DCS391 Premium Circular Saw with an intelligent trigger allowing total control over all applications. It has a powerful and highly efficient PM58 fan cooled motor with replaceable brushes, which delivers up to 3,700 rotations per minute for a fast cutting action. It has a spindle lock for quick and easy blade change. No Load Speed: 3,700/min.Max Cutting Depth: @90°: 55mm, @45°: 42.1mm.Blade: 165 x 20mm Bore.Weight: 3.8kg. 1 x 18V DCS331 XR Premium Jigsaw is designed for efficiency and has a powerful and highly efficient DEWALT PM47 fan-cooled motor with replaceable brushes. The intelligent variable speed trigger and lock-off switch ensure quick controlled cuts and enhanced work safety and the quick and easy, patented keyless blade change system accepts T-shank blades. Strokes at No Load: 0-3,000/min.Levels of Pendulum Stroke: 4.Stroke Length: 26mm.Capacity: Wood: 135mm, Metal: 10mm.Weight: 3.1kg. 1 x 18V XR Li-ion Handheld LED Work Light is perfect for inspecting areas without electricity or natural light. Fitted with variable light settings for maximum brightness or extended run time and a 250-500 lumen output with broad and even beam pattern. The articulating head has nine positions for directional control of light output and an extendable hanging hook allows the work light to be suspended during use. Bulb Type: LED. Light Output: 250-500 lumens. Protection Class: IP54. 1 x 10.8-18V DCB105 Multi-Voltage XR Charger varies the charge rate according to battery type to increase battery pack life. It features diagnostics with bright LED indicator which communicates the battery charge status: charged, charging, power problem, and battery too hot or too cold. Charges all XR Li-ion DEWALT Slide Pack 10.8, 14.4, and 18V batteries. Supplied with 3 x 18V 5.0Ah Li-ion Slide Pack Batteries and 2 x DWST1-71195 TSTAK™ Deep Toolboxes.
The DEWALT DCK623P3 XR Brushless 6 Piece Kit, contains the following: 1 x 18V DCD796 XR Brushless Compact Hammer Drill Driver has an ultra compact, lightweight design. The 2 speed, all metal transmission, provides increased runtime and longer tool life. It offers a 15 position adjustable torque control for consistent screwdriving. Chuck: 13mm KeylessNo Load Speed: 0-550/0-2,000/min.Impact Rate: 0-9,350/34,000/bpmMax. Torque: 27/70Nm, 15 SettingsCapacity: Steel 13mm, Masonry 13mm, Wood 40mmWeight: 1.3kg 1 x 18V DCF887 XR Brushless Impact Driver is equipped with application control. This is achieved through 3 motor speeds and torque settings. Precision Drive mode offers additional control in screwdriving applications to avoid material and fastener damage. It has a super lightweight and compact design. Bit Holder: 6.35mm (1/4in)No Load Speed: 0-1,000/0-2,800/0-3,250/min.Impact Rate: 0-1,800/0-2,900/0-3,800/bpmMax. Torque: 26/80/205NmWeight: 1.56kg 1 x 18V DCG405 XR Brushless Grinder has a powerful fan cooled motor with a mesh cover that provides additional motor protection by preventing dust being sucked through the motor. Its electronic clutch reduces the kickback reaction in the event of a pinch or stall. The 2 position side handle provides greater control, whilst the rubber overmould provides enhanced grip and comfort. For added safety, the electronic brake stops the wheel quickly when the trigger is released. No Load Speed: 9,000/min.Disc Diameter: 125mm, M14 SpindleWeight: 1.75kg 1 x 18V DCS367 Brushless XR Reciprocating Saw has a compact design that allows for better access to hard to reach cuts. Offers improved balance and ease of handling due to central motor position. The 4 position blade clamp allows for flush cutting and improved versatility. There is a lever action keyless blade clamp for tool-free blade change and an LED work light for improved visibility of cut. No Load Speed: 0-2,900/min.Stroke Length: 28.6mmCapacity: Wood 300mm, Steel Sections & Pipes 100mm, PVC 160mmWeight: 2.3kg 1 x 18V DCS570 XR Brushless Circular Saw, ideal for general purpose ripping, cross-cutting and bevelling, for wood and other construction materials. It has a high torque brushless motor for improved durability and power. With a precise cutting depth scale, up to 65mm and a variable bevel angle, up to 57°. Its stable block construction provides low vibration running and increased service life. With an additional handle for safe 2 handed work. No Load Speed: 5,500/min.Max. Cutting Depth @90º: 64mmBlade: 184 x 16mm BoreBevel Capacity: 57° 1 x 18V XR Handheld LED Work Light is perfect for inspecting areas without electricity or natural light. Fitted with variable light settings for maximum brightness or extended runtime and a 250-500 lumen output with broad and even beam pattern. The articulating head has 9 positions for directional control of light output and an extendable hanging hook allows the work light to be suspended during use. Bulb Type: LEDLight Output: 250-500 lumens Protection Class: IP54 Also supplied with: 3 x 18V 5.0Ah Li-ion Batteries, 1 x 10.8-18V DCB115 XR Multi-Voltage Charger and 2 x TOUGHSYSTEM™ DS300 Toolboxes.
The DEWALT DCK368P3T XR 3 Piece Kit, contains the following: 1 x 18V DCD796 XR Brushless Hammer Drill Driver which has an ultra compact, lightweight design. The two speed all metal transmission provides increased run time and longer tool life. It offers a 15 position adjustable torque control for consistent screwdriving. Chuck: 13mm Keyless.No Load Speed: 0-550/0-2,000/Min.Impact Rate: 0-9,350/34,000/bpm.Max Torque: 27/70Nm, 15 Settings.Capacity: Steel: 13mm, Masonry: 13mm, Wood: 40mm.Weight: 1.3kg. 1 x 18V DCF887 XR Brushless Impact Driver that is equipped with application control. This is achieved through 3 motor speeds and torque settings. Precision Drive mode offers additional control in screwdriving applications to avoid material and fastener damage. It has a super lightweight and compact design. Bit Holder: 6.35mm (1/4in).No Load Speed: 0-850/0-2,100/0-3,000/Min.Impact Rate: 0-1,800/0-2,900/0-3,700/bpm.Max Torque: 26/80/203Nm.Weight: 1.56kg. 1 x 18V DCH273 Brushless XR 3 Mode Hammer fitted with an electronic clutch for consistently high torque and improved durability. Ideal for drilling anchors and fixing holes into concrete. Modes: Rotary, SDS Hammer, Chisel Only.No Load Speed: 0-1,100/Min.Impact Rate: 0-4,600/bpm.Impact Energy: 2.1 Joules.Capacity: Wood: 26mm, Metal: 13mm, Masonry: 24mmWeight: 3.1kg. 1 x 10.8-18V DCB115 XR Multi-Voltage Charger which has a compact size, making it easy to store and it is also wall mountable. A bright LED indicator communicates the battery charge status: charged, charging, power problem, and battery too hot or too cold conditions. It is capable of charging a 2.0Ah battery pack in 30 minutes. Also supplied with 3 x 18V 5.0Ah Li-ion Batteries and 2 x TSTAK™ II Toolboxes.
The DEWALT DCK305P2T XR Triple Kit, contains the following: 1 x 18V DCH273P2 XR Brushless 3 Mode Hammer, fitted with an electronic clutch for consistently high torque and improved durability. Ideal for drilling anchors and fixing holes into concrete. Modes: Rotary, SDS Hammer, Chisel OnlyNo Load Speed: 0-1,100/min.Impact Rate: 0-4,600/bpm with 2.1 joulesCapacity: Wood 26mm, Metal 13mm, Masonry 24mmWeight: 3.1kg 1 x 18V DCF887 XR Brushless Impact Driver, equipped with application control. This is achieved through 3 motor speeds and torque settings. Precision Drive mode offers additional control in screwdriving applications to avoid material and fastener damage. It has a super lightweight and compact design. Bit Holder: 6.35mm (1/4in)No Load Speed: 0-1,000/0-2,800/0-3,250/min.Impact Rate: 0-1,800/0-2,900/0-3,800/bpmMax. Torque: 26/80/205NmWeight: 1.56kg 1 x 18V DCG405 XR Brushless Grinder has a powerful fan cooled motor with a mesh cover that provides additional motor protection by preventing dust being sucked through the motor. Its electronic clutch reduces the kick back reaction in the event of a pinch or stall. The 2 position side handle provides greater control, whilst the rubber overmould provides enhanced grip and comfort. For added safety, the electronic brake stops the wheel quickly when the trigger is released. No Load Speed: 9,000/min.Disc Diameter: 125mm, M14 SpindleWeight: 1.75kg Also supplied with: 2 x 18V 5.0Ah Li-ion Batteries, 1 x XR Li-ion Charger, 1 x TSTAK I and 1 x TSTAK II.
The DEWALT DCK278P2 XR Twin Pack, contains the following: 1 x 18V DCD996 XR Brushless Combi Drill with a tough 3 speed all metal transmission for increased run time and a longer tool life. Electronic Clutch with 11 position adjustable torque control for optimised precision when screwdriving. Also has an improved 3 position LED torch with high/medium/low settings. Chuck: 13mm Keyless. No Load Speed: 0-450/0-1,300/0-2,000/min.Impact Rate: 0-8,600/0-25,500/0-38,250/bpm.Max Torque: 95Nm, 11 Settings.Capacity: Wood: 55mm, Steel: 15mm, Masonry: 16mmWeight: 2.1kg. 1 x 18V DCG412 XR Premium Angle Grinder has a powerful fan cooled motor and intelligent variable speed trigger and lock-off switch for enhanced work safety and control. It features the XR Lithium Ion Technology and is part of the intelligent XR Lithium Ion Series designed for efficiency and making applications faster. No Load Speed: 7,000/min.Disc Diameter: 125mm, M14 Spindle.Weight: 3.0kg. 1 x 10.8-18V DCB105 Multi-Voltage XR Charger varies the charge rate according to battery type to increase battery pack life. It features diagnostics with bright LED indicator which communicates the battery charge status: charged, charging, power problem, and battery too hot or too cold. Charges all XR Li-ion DEWALT Slide Pack 10.8, 14.4, and 18V batteries. Also supplied with: 2 x 18V 5.0Ah Li-ion Batteries and 1 x DS300 TOUGHSYSTEM™ Toolbox.
The DEWALT DCK276T2T FlexVolt Twin Pack, contains the following: 1 x 18V DCD996 XR Brushless Combi Drill with a tough 3 speed all metal transmission for increased run time and a longer tool life. Electronic Clutch with 11 position adjustable torque control for optimised precision when screwdriving. Also has an improved 3 position LED torch with high/medium/low settings. Chuck: 13mm Keyless. ;No Load Speed: 0-450/0-1,300/0-2,000/Min.Impact Rate: 0-8,600/0-25,500/0-38,250/bpm.Max Torque: 95Nm, 11 Settings.Capacity: Wood: 55mm, Steel: 15mm, Masonry: 16mmWeight: 2.1kg. 1 x 18V DCF887 XR Brushless Impact Driver is equipped with application control. This is achieved through 3 motor speeds and torque settings. Precision Drive mode offers additional control in screwdriving applications to avoid material and fastener damage. It has a super lightweight and compact design. Bit Holder: 6.35mm (1/4in).No Load Speed: 0-850/0-2,100/0-3,000/Min.Impact Rate: 0-1,800/0-2,900/0-3,700/bpm.Max Torque: 26/80/203Nm.Weight: 1.56kg. 1 x 18-54 Volt DCB118 FlexVolt XR Fast Charger that will charge 54 Volt FlexVolt and 18V XR batteries. A bright LED indicator communicates battery charge status: charged, charging, power problem, and battery too hot or too cold conditions. It has a compact design that is wall mountable and fan cooled so it can charge efficiently between 4°C and 40°C. Also supplied with: 2 x 18/54 Volt 6.0/2.0Ah FlexVolt Li-ion Batteries, 2 x Belt Hooks, 1 x Side Handle for Combi Drill and 1 x DWST1-71195 TSTAK™ Deep Toolbox.
The DEWALT DCK276P2 Brushless Twin Pack, contains the following: 1 x 18V DCD996 XR Brushless Combi Drill with a tough 3 speed all metal transmission for increased run time and a longer tool life. Electronic Clutch with 11 position adjustable torque control for optimised precision when screwdriving. Also has an improved 3 position LED torch with high/medium/low settings. Chuck: 13mm Keyless. No Load Speed: 0-450/0-1,300/0-2,000/min.Impact Rate: 0-8,600/0-25,500/0-38,250/bpm.Max Torque: 95Nm, 11 Settings.Capacity: Wood: 55mm, Steel: 15mm, Masonry: 16mmWeight: 2.1kg. 1 x 18V DCF887 XR Brushless Impact Driver is equipped with application control. This is achieved through 3 motor speeds and torque settings. Precision Drive mode offers additional control in screwdriving applications to avoid material and fastener damage. It has a super lightweight and compact design. Bit Holder: 6.35mm (1/4in).No Load Speed: 0-850/0-2,100/0-3,000/min.Impact Rate: 0-1,800/0-2,900/0-3,700/bpm.Max Torque: 26/80/203Nm.Weight: 1.56kg. 1 x 10.8-18V DCB105 Multi-Voltage XR Charger varies the charge rate according to battery type to increase battery pack life. It features diagnostics with bright LED indicator which communicates the battery charge status: charged, charging, power problem, and battery too hot or too cold. Charges all XR Li-ion DEWALT Slide Pack 10.8, 14.4, and 18V batteries. Also supplied with 2 x 18V 5.0Ah Li-ion Batteries and 1 x DS150 TOUGHSYSTEM™ Toolbox.
The DEWALT DCK269P2 XR Twin Pack, contains the following: 1 x 18V DCF899 XR Brushless High Torque Impact Wrench with 3 speed and torque settings that gives you the control to best suit your application. The 1/2in (13mm) square drive with detent pin allows for more efficient torque delivery and excellent socket retention. Bit Holder: 1/2in Detent Pin.No Load Speed: 0-400/0-1,200/0-1,900/min.Impact Rate: 0-2,400/min.Max Torque: 950Nm, Breakaway Torque: 1,625Nm. Max Bolt Diameter: M20.Weight: 2.62kg. 1 x 18V DCG412 XR Premium Angle Grinder has a powerful fan cooled motor and intelligent variable speed trigger and lock-off switch for enhanced work safety and control. It features the XR Lithium Ion Technology and is part of the intelligent XR Lithium Ion Series designed for efficiency and making applications faster. No Load Speed: 7,000/min.Disc Diameter: 125mm, M14 Spindle.Weight: 3.0kg. 1 x 10.8-18V DCB105 Multi-Voltage XR Charger varies the charge rate according to battery type to increase battery pack life. It features diagnostics with bright LED indicator which communicates the battery charge status: charged, charging, power problem, and battery too hot or too cold. Charges all XR Li-ion DEWALT Slide Pack 10.8, 14.4, and 18V batteries. Also supplied with: 2 x 18V 5.0Ah Li-ion Batteries and 1 x DS300 TOUGHSYSTEM™ Toolbox.
The DEWALT DCK266P2T Twin Pack, contains the following: 1 x 18V DCD796 XR Brushless Hammer Drill Driver has an ultra compact, lightweight design. The two speed all metal transmission provides increased runtime and longer tool life. It offers a 15 position adjustable torque control for consistent screwdriving. Chuck: 13mm.No Load Speed: 0-550/0-2,000/min.Impact Rate: 0-9,350/0-34,000/min.Max Torque: 70Nm.Capacity: Wood: 40mm, Steel: 13mm, Masonry: 13mm. 1 x 18V DCF887 XR Brushless Impact Driver is equipped with application control. This is achieved through 3 motor speeds and torque settings. Precision Drive mode offers additional control in screwdriving applications to avoid material and fastener damage. It has a super lightweight and compact design. Bit Holder: 6.35mm (1/4in).No Load Speed: 0-850/0-2,100/0-3,000/min.Impact Rate: 0-1,800/0-2,900/0-3,700/bpm.Max Torque: 26/80/203Nm.Weight: 1.56kg. 1 x 10.8-18V DCB115 XR Multi-Voltage Charger has a compact size, making it easy to store and it is also wall mountable. A bright LED indicator communicates the battery charge status: charged, charging, power problem, and battery too hot or too cold conditions. It is capable of charging a 2.0Ah battery pack in 30 minutes. Voltage: 10.8/14.4/18V. Battery Chemistry: Li-ion Charging Current: 4.0 A. Also supplied with: 2 x 18V 5.0Ah Li-ion Batteries and 1 x TSTAK™ II Toolbox.
The DEWALT DCK266P2 XR Brushless Twin Pack, contains the following: 1 x 18V DCD796 XR Brushless Hammer Drill Driver has an ultra compact, lightweight design. The two speed all metal transmission provides increased runtime and longer tool life. It offers a 15 position adjustable torque control for consistent screw driving. Chuck: 13mm Keyless.No Load Speed: 0-550/0-2,000/min.Impact Rate: 0-9,350/3,4000/bpmTorque: 27/70Nm, 15 Settings.Capacity: Steel: 13mm, Masonry: 13mm, Wood: 40mm 1 x 18V DCF887 XR Brushless Impact Driver is Equipped with application control, this is achieved through 3 motor speeds and torque settings. Precision Drive mode offers additional control in screwdriving applications to avoid material and fastener damage. It has a super lightweight and compact design. No Load Speed: 0-850/0-2,100/0-3,000/min.Impact Rate: 0-1,800/0-2,900/0-3,700/bpm.Torque: 26/80/203Nm. 1 x 10.8-18V DCB105 Multi-Voltage XR Charger varies the charge rate according to battery type to increase battery pack life. It features diagnostics with bright LED indicator which communicates the battery charge status: charged, charging, power problem, and battery too hot or too cold. Charges all XR Li-ion DEWALT Slide Pack 10.8V, 14.4V, and 18V batteries. Also supplied with 2 x 18V 5.0Ah Li-ion Batteries and 1 x TOUGHSYSTEM™ DS150 Toolbox.
The DEWALT DCK259M2T Brushless Twin Pack, contains the following: 1 x 18V DCD795 Brushless Compact Hammer Drill with ultra compact and lightweight design for use in confined spaces. With 2-speed, all-metal transmission. LED work light for better visibility. Chuck: 13mm.No Load Speed: 0-600/0-2,000/min.Impact Rate: 0-10,200/0-34,000/min.Max Torque: 60Nm.Capacity: Wood: 38mm, Steel: 13mm, Masonry: 13mm. 1 x 18V DCF886 Brushless Impact Driver with brushless motor technology, aluminium front housing and an ergonomic handle. 3 LEDs provide work piece illumination. With 'drop in' keyless hex driver for a quick, one-handed fitment. Bit holder: 6.35mm (1/4in) hex.No Load Speed: 0-2,800/min.Impacts Per Minute: 0-3,200/bpm.Max Torque: 165Nm.Capacity: Bolt M12.Bare Weight: 0.96kg. Also comes with: 2 x 18V 4.0Ah Batteries, 1 x 10.8-18V DCB105 Multi-Voltage XR Charger and 1 x TSTAK V Kit Box
The DEWALT DCK2532P2 XR Twin Pack, contains the following: 1 x 18V DCF887 XR Brushless Impact Driver is equipped with application control. This is achieved through 3 motor speeds and torque settings. Precision Drive mode offers additional control in screwdriving applications to avoid material and fastener damage. It has a super lightweight and compact design. Bit Holder: 6.35mm (1/4in).No Load Speed: 0-850/0-2,100/0-3,000/min.Impact Rate: 0-1,800/0-2,900/0-3,700/bpm.Max Torque: 26/80/203Nm.Weight: 1.56kg. 1 x 18V DCH273 Brushless XR 3 Mode Hammer is fitted with an electronic clutch for consistently high torque and improved durability. Ideal for drilling anchors and fixing holes into concrete. Modes: Rotary, SDS Hammer, Chisel Only.No Load Speed: 0-1,100/min.Impact Rate: 0-4,600/bpm.Impact Energy: 2.1 Joules.Capacity: Wood: 26mm, Metal: 13mm, Masonry: 24mmWeight: 3.1kg. 1 x 10.8-18V DCB115 Multi-Voltage XR Charger Also supplied with: 2 x 18V 5.0Ah Li-ion Batteries and 1 x DWST1-71195 TSTAK™ Deep Toolbox.
The DEWALT DCK2500P2B XR Brushless Tool Connect Twin Pack, contains the following: 1 x 18V DCD797 XR Brushless Hammer Drill Driver with Tool Connect which allows you to set up personalised rpm tool modes. This can also help prolong tool and accessory life. It also features customisable LED settings; brightness required and the length of time the light stays on. Three customisable Tool Connect modes allow for the user to switch between different application settings quickly and easily. A fourth 'home' setting guarantees that there is always a familiar base drilling setting available. Chuck Capacity: 13mm KeylessNo Load Speed: 0-2,000/min.Impact Rate: 0-9,300/0-34,000/bpmMax. Torque Hard/Soft: 70/27NmCapacity: Wood 40mm, Metal 13mm, Masonry 13mm 1 x 18V DCF888 XR Brushless Impact Driver with Tool Connect which allows you to set up personalised rpm tool modes. This can also help prolong tool and accessory life. It also features customisable LED settings; brightness required and the length of time the light stays on. Three customisable Tool Connect modes allows for the user to switch between different application settings quickly and easily. A fourth 'home' setting guarantees that there is always a familiar base drilling setting available. Precision Drive mode offers additional control in screw driving applications to avoid material and fastener damage. Bit Holder: 6.35mm (1/4in)No Load Speed: 0-1,000/0-2,800/0-3,250/min.Impact Rate: 0-1,800/0-2,900/0-3,800/bpmMax. Torque: 205Nm Also supplied with: 2 x 18V 5.0Ah Li-ion Batteries, 1 x DCB113 XR Li-ion Charger and 1 x TSTAK™ Toolbox.
The DEWALT DCK218D2T XR Twin Pack, contains the following: 1 x 10.8 Volt DCD716 Combi Drill is an excellent solution for subcompact performance and power. Has a high torque output of 30Nm and can drill into masonry. 2-speed transmission ensures easy work of light application. Single clutch collar with 16 adjustable torque control settings. No Load Speed: 0-1,500/0-4,000/min.Impact Rate: 22,500/bpm.Max. Torque: 30Nm.Torque Settings: 16.Capacity: Metal: 10mm, Masonry: 8mm, Wood: 20mm. 1 x 10.8 Volt DCF815 Impact Drill with all metal gearing for efficient power transmission and long life. Aluminium front housing provides greater heat dispersion increasing motor life. Parabolic switch profile allows for greater control over speed. 6.35mm 'drop in' key-less hex driver which allows for quick fitment. Bit Holder: 6.35mm (1/4in).No Load Speed: 2,450/min.Impact Rate: 3,400/min.Max. Torque: 107Nm.Capacity: Bolt M12. Supplied with: 2 x 10.8 Volt 2.0Ah Li-ion Batteries, 1 x DCB113 XR Charger and 1 x TSTAK™ Toolbox.
The DEWALT DCK211D2T XR Twin Pack, contains the following: 1 x 10.8 Volt DCD710 XR Sub Compact Drill Driver with adjustable torque control for consistent screwdriving into a variety of materials. 10mm single sleeve keyless chuck with automatic spindle lock for quick and easy bit change. All metal gearing for efficient power transmission and long tool life. Chuck: 10mm.No Load Speed: 0-400/0-1,500/min.Max Torque: 16Nm, 15 Settings.Capacity: Wood: 19mm, Steel: 10mm.Weight: 0.91kg. 1 x 10.8 Volt DCF815 XR Impact Driver with all-metal gearing and aluminium front housing that provides greater heat dispersion for increased motor life. 3 LED 'Halo' Ring provides illumination of the workpiece. Bit Holder: 6.35mm (1/4in).No Load Speed: 2,450/min.Impacts Per Minute: 3,400/min.Max Torque: 107Nm.Capacity: Bolt M12.Weight: 1.04kg. Supplied with: 2 x 10.8 Volt 2.0Ah Li-ion Batteries, 1 x 10.8-18V Multi-Voltage XR Charger and 1 x TSTAK™ V Toolbox.
The DEWALT DCK2111L2T XR Brushless Sub-Compact Twin Pack, contains the following: 1 x 12V DCD706 XR Sub-Compact Hammer is fitted with an efficient brushless motor that gives 15% more runtime than previous generation. It is 38.5mm shorter than previous generation, allowing you to get into even smaller spaces. 15 Position adjustable torque control for consistent screw driving into a variety of materials. Chuck: 10mm KeylessNo Load Speed: 0-425/0-1,500/min.Impact Rate: 25,500/bpmMax. Torque: 57.5Nm, 15 SettingsCapacity: Steel 10mm, Masonry 10mm, Wood 20mmWeight: 1.2kg 1 x 12V DCF801 XR Brushless Sub-Compact Impact Driver is fitted with an efficient brushless motor that gives 15% more runtime than previous generation. With 3 electronic speeds allowing for greater control when working on precise applications. The Precision Drive mode is ideal for fine screw work, preventing the screw head or material from being damaged.The 'Drop and Load' bit holder allows for efficient one-handed operation. No Load Speed: 0-950/0-1,950/0-2,850/min.Impact Rate: 0-3,600/bpmMax. Torque: 163NmBare Unit Weight: 0.8kg Also supplied with: 2 x 12V 3.0Ah Li-ion Batteries, 1 x Multi-Voltage XR Charger & 1 x TSTAK Kit Box
The DEWALT DCK2110L2 XR Brushless Sub-Compact Twin Pack, contains the following: 1 x 12V DCD701 XR Brushless Sub-Compact Drill Driver has a lightweight design for ultimate portability and ease of use. With an ergonomically designed handle for optimum comfort and control. Compatible with your existing 10.8V batteries and tools. Chuck: 10mm KeylessNo Load Speed: 0-425/0-1,500/min.Max. Torque: 57.5Nm, 15 SettingsCapacity: Wood 20mmWeight: 0.9kg 1 x 12V DCF801 XR Brushless Sub-Compact Impact Driver with 3 electronic speeds for greater control when working on precise applications. Precision Drive mode is ideal for fine screw work, preventing the screw head or material from being damaged. Compatible with your existing 10.8V batteries and tools. No Load Speed: 0-950/0-1,950/0-2,850/min.Impact Rate: 0-3,600/bpmMax. Torque: 163NmBare Unit Weight: 0.8kg Also supplied with: 2 x 12V 3.0Ah Li-ion Batteries, 1 x 10.8-18V DCB112 XR Multi-Voltage Li-ion Charger and 1 x TSTAK II Kit Box
The DEWALT DCK206M2 Twin Pack, contains the following: 1 x 18V DCH253 3Mode SDS Hammer Drill that is ideal for drilling anchors and fixing holes into concrete, brick and masonry from 4mm to 24mm. The hammer drill has a rotation stop mode for light chiselling in plaster, tiles and render and an impact stop mode for rotary only drilling in wood and metal. It uses 4.0Ah 18V Lithium Ion batteries to deliver high performance, long life and maximum runtime. No Load Speed: 0-1,200/min.Impact Rate: 0-4,500/min with 2.1 Joules.Capacity: Concrete: 24mm, Steel: 13mm, Wood: 26mm.Weight 3.1kg. 1 x 18V DCD785 XR Compact Hammer Drill Driver has an ultra compact, lightweight design that allows it to be used in confined spaces, whilst the intelligent trigger design allows for total control of application. It has a two speed, all metal transmission for increased run time and a longer tool life. Chuck: 13mm Keyless.No Load Speed: 0-600/0-2,000/min.Impact Rate: 0-10,200/0-34,000/bpmTorque: 60Nm, 14 Settings.Capacity: Steel: 13mm, Masonry: 13mm, Wood: 38mm 1 x 10.8-18V DCB105 Multi-Voltage XR Charger varies the charge rate according to battery type to increase battery pack life. It features diagnostics with bright LED indicator which communicates the battery charge status: charged, charging, power problem, and battery too hot or too cold. Charges all XR Li-ion DEWALT Slide Pack 10.8, 14.4, and 18V batteries. Supplied with 2 x 18V 4.0Ah Li-ion Batteries and 1 x DWST1-71195 TSTAK™ Deep Toolbox.
The DEWALT DCK2062M2T XR Brushless Twin Pack, contains the following: 1 x 18V DCD709 XR Brushless Combi Hammer Drill has an overall head length of just 180mm, allowing you to get into the smallest of spaces. Fitted with an ergonomically designed handle for optimum comfort and control. Chuck: 13mmNo Load Speed: 0-450/0-1,650/min.Impact Rate: 0-7,650/0-28,050/bpmMax. Torque: 65Nm, 15 Settings + DrillCapacity: Wood 30mm, Steel 13mm, Masonry 13mm 1 x 18V DCF809 XR Brushless Impact Driver is super compact at only 130mm in length, allowing you to get into even smaller spaces than most other impact drivers. Fitted with an ergonomically designed handle for optimum comfort and control. Bit Holder: 6.35mm (1/4in)No Load Speed: 0-2,800/min.Impact Rate: 0-32,000/bpmMax. Torque: 190Nm Also supplied with: 2 x 18V 4.0Ah Li-ion Batteries, 1 x 10.8-18V DCB115 XR Multi-Voltage Li-ion Charger and 1 x TSTAK II Kit Box
The DEWALT DCK2033X2 Brushless FlexVolt XR Twin Pack, contains the following: 1 x 18/54V DCH333 XR FlexVolt Brushless SDS Plus Hammer has a brushless motor for extreme run time and reduced maintenance. Compact, lightweight and ergonomic design for improved comfort and support during extended operating periods. With rotation stop mode for light chiselling in plaster, tiles and render, and impact stop mode for rotary only drilling in wood and metal. Modes: Rotary, SDS Hammer, Chisel OnlyNo Load Speed: 0-1,000/min.Impact Rate: 0-4,480/min. with 3.5 joulesCapacity: Concrete 30mm, Steel 13mm, Wood 26mmWeight 3.7kg 1 x 18V DCD996 XR Brushless Combi Drill with a tough 3-speed all-metal transmission for increased run time and a longer tool life. Electronic Clutch with 11-position adjustable torque control for optimised precision when screwdriving. It also has an improved 3-position LED torch with high/medium/low settings. Chuck: 13mm KeylessNo Load Speed: 0-450/0-1,300/0-2,000/min.Impact Rate: 0-8,600/0-25,500/0-38,250/bpmMax. Torque: 95Nm, 11 SettingsCapacity: Wood 55mm, Steel 15mm, Masonry 16mmWeight: 2.1kg 1 x 18/54V DCB118 FlexVolt XR Fast Charger will charge 54V FlexVolt and 18V XR batteries. A bright LED indicator communicates battery charge status: charged, charging, power problem and battery too hot or too cold conditions. It has a compact design that is wall mountable and is fan cooled so it can charge efficiently between 4°C and 40°C. Also supplied with: 2 x 18/54V 9.0/3.0Ah FlexVolt Li-ion Batteries and 1 x TSTAK VI.
The DEWALT Tool Backpack is made from a combination of durable 1200 denier outer fabric and 600 denier lining for maximum protection. It has a large 40 litre carry capacity and a maximum load of 25kg, so there is plenty of room for tools, accessories and electronic devices. Inside there is a separate padded compartment that is ideal for carrying a laptop, tablet or documents safely. The reinforced, water-resistant base provides increased protection from wear and tear, as well as weather protection. Reinforced, padded shoulder and sternum straps provide additional comfort during transport. There is also a practical luggage strap for attachment to a trolley. Other features include side pockets with the ability to secure long objects and an exterior tape measure holder. Specification: Dimensions: 340 x 470 x 230mmMax. Load Capacity: 25kgStorage Volume: 40 Litres
