The RIDGID Aluminium Straight Pipe Wrench has the same strength and durability as other RIDGID heavy-duty wrenches but are made from lightweight aluminium. That is nearly 40% lighter than the cast-iron wrench of the same size. The jaws are identical to the RIDGID heavy-duty wrenches.RIDGID Aluminium Straight Pipe Wrench Size: 250mm (10in)Capacity: 40mm (1.1/2in)Weight: 0.4kg
The RIDGID Strap Wrenches are best for any polished pipe. They have a sturdy, cast-iron housing with an I-beam handle and a strong, woven nylon strap that gives a tight grip. Two models available with special strap for plastic pipe.RIDGID No.2 Strap Wrench Handle Length: 300mm (11.3/4in).Strap Length: 760mm (30in).Strap Width: 30mm (1.1/8in).Rated Pipe Capacity: 50mm (2in).Actual O.D. Capacity: 135mm (5.1/2in).Weight: 0.8kg. Rated Pipe Capacity is the nominal diameter that can be correctly tightened.Actual O.D. Capacity is the actual O.D. that strap can accommodate.
RIDGID Aluminium Offset Pipe Wrenches feature a jaw opening parallel to the handle and a narrower hook jaw head. This lightweight wrench provides easy entry into tight spots and is ideal for overhead applications.RIDGID Aluminium Offset Pipe Wrench Size: 600mm (24in).Capacity: 80mm (3in).Weight: 2.7kg.
This Teng Tools Industrial wrench is made of chrome vanadium steel for increased strength and durability. It exceeds international standards ISO 6787-1976, ASME B.107.8M-1996, BS6333-1995, DIN 3117-1988 and JIS B4604-1976. Graduated markings on the jaw allow the size of the fastening to be accurately measured and the wrench to be set at the right size. The 15 degree jaw angle allows the wrench to be used in narrow spaces as only 30 degrees turning is needed. The wider jaw opening increases the range of bolt sizes to be worked on. It is non-protruding on the moveable jaw end, which gives better action when space is limited. The handle provides a comfortable hand fit.The TEN4004 Adjustable Wrench has the following specifications: Length: 250mm (10 inch).Capacity: 33mm.Capacity AF: 1.1/4 inch
Bahco 90 Series Chrome Plated ERGO™ Adjustable Wrenches with a comfortable, thermoplastic handle and larger grip width and tapered jaws with a measurement scale on the fixed jaw. They have a 16º head angle with no protruding shank when fully open and a strong I section handle with a spring loaded square section, and a knurled adjusting nut.Overall Length: 300mm (12 in) Capacity: 34mm.Weight: 690g. Chrome Plated Finish.
The NorTorque utilises Norbar rsquo;s proven mechanism and internal components, and incorporates them into a purposeful and attractive torque wrench to delight a wide range of users, from professional mechanics to hobby enthusiasts. The wrench offers a comfortable, robust single material handle which also contains an easy to set scale. Fine engineering ensures the wrench adjustment is both fast and fingertip light meaning you can do your job more efficiently. The sleek body tube finish was chosen for its robustness and minimal process impact on the environment. Supplied with a Declaration of Conformance to satisfy the requirements of ISO 6789-1:2017. This Norbar NorTorque Adjustable Dual Scale Ratchet Torque Wrench has the following specifications: Drive: 16mm Spigot.Accuracy: plusmn;3%.Range: 12-60Nm (10-45 lbf.ft).Length: 323mm.Weight: 0.60kg.
The Footprint Pipe Wrenches have drop forged hooks and are fitted to a pressed steel frame. The teeth are induction hardened to ensure a high grip is maintained. This traditional plumber's tool is an all purpose wrench which grips the workpiece tighter as more pressure is exerted. Removable screw for easy adjustment. This style has a screwdriver end on the handle.The Footprint 69812w Pipe Wrench has the following specification: Length: 300mm (12in).Jaw Capacity: 60mm.
The Britool hook and pin wrenches are forged in hardened chrome vanadium steel with a high chrome finish.The Britool BRIE112604B Hinged Hoyes (hook) wrench has the following dimensions:Sizes cover: 114 - 159mmLength: 308mmWeight: 490g
The RIDGID Aluminium Straight Pipe Wrench has the same strength and durability as other RIDGID heavy-duty wrenches but are made from lightweight aluminium. That is nearly 40% lighter than the cast-iron wrench of the same size. The jaws are identical to the RIDGID heavy-duty wrenches.Specification: Size: 450mm (18in)Pipe capacity: 65mm (2.1/2in)
The RIDGID Heavy-Duty Straight Pipe Wrench has a sturdy, cast-iron housing and I-beam handle with full floating forged hook jaw, featuring self cleaning threads with replaceable hook and heel jaws.RIDGID Heavy-Duty Straight Pipe Wrench Size: 1200mm (48in)Capacity: 150mm (6in)Weight: 15.6kg
The RIDGID Strap Wrenches are best for any polished pipe. They have a sturdy, cast-iron housing with an I-beam handle and a strong, woven nylon strap that gives a tight grip. Two models available with special strap for plastic pipe.RIDGID No.5 Strap Wrench Handle Length: 450mm (18in).Strap Length: 750mm (29.1/4in).Strap Width: 45mm (1.3/4in).Rated Pipe Capacity: 125mm (5in).Actual O.D. Capacity: 175mm (7in).Weight: 0.9kg. Rated Pipe Capacity is the nominal diameter that can be correctly tightened.Actual O.D. Capacity is the actual O.D. that strap can accommodate.
The Britool hook and pin wrenches are forged in hardened chrome vanadium steel with a high chrome finish.The Britool E112601B Hinged Hoyes (hook) wrench has the following dimensions:Sizes cover: 19 - 51mmLength: 165mmWeight: 130g
Bahco 80 Series Adjustable Wrench with a phosphated finish and tapered jaws that feature a measurement scale on the fixed jaw. They have a 16º head angle with no protruding shank when fully open and a strong I section handle with a spring loaded square section, and a knurled adjusting nut.Overall length: 250mm (10 in).Jaw Capacity: 30mm.Weight: 400g.Spare Adjustable Jaw BAH8072A - Available to OrderSpare Knurl Set: BAH8072B - Available to order
The Bahco 90 Series Black Phosphated ERGO™ Adjustable Wrenches have a 40% wider opening compared to a standard adjustable wrench of equivalent size. The head combines slimness for accessibility with strength for performance, this combined with a convenient length of the handle and low weight makes it perfect for plumbers and other tradesmen that carry their tools with them. The jaws are angled at 15° to provide maximum access in confined spaces. Precision-hardened and anti-corrosion treated. With comfortable slip free, warm thermoplastic handle. Left-reading, measurement scale in mm.The BAH9029 Adjustable Wrench 170mm Extra Wide Jaw 32mmLength: 170mm (6 inch)Capacity: 32mmPhosphated finish.
Bahco Professional Stillson Type Pipe Wrench forged from high quality steel. Both jaws have deep grooves ensuring instant grip and ratcheting action. Can be used with copper, aluminium, ferrous and non-ferrous metals.Size: 200mm (8in).Capacity: 25mm.
This Teng Tools Industrial wrench is made of chrome vanadium steel for increased strength and durability. It exceeds international standards ISO 6787-1976, ASME B.107.8M-1996, BS6333-1995, DIN 3117-1988 and JIS B4604-1976. Graduated markings on the jaw allow the size of the fastening to be accurately measured and the wrench to be set at the right size. The 15 degree jaw angle allows the wrench to be used in narrow spaces as only 30 degrees turning is needed. The wider jaw opening increases the range of bolt sizes to be worked on. It is non-protruding on the moveable jaw end, which gives better action when space is limited. The handle provides a comfortable hand fit.The TEN4002 Adjustable Wrench has the following specifications: Length: 150mm (6 inch).Capacity: 24mm.Capacity AF: 15/16 inch.
The Bahco ERGO™ Pipe Wrench is a multi-purpose pipe wrench, black oxidised and anti-rust treated high-alloyed, hardened special steel with precision induction hardened jaws. Outer handle of hardened sheet metal with ergonomically designed soft, warm-to-the touch, high friction handle with a strong, stable core. Thermoplastic surface on tough polypropylene gives a superior grip. Optimised design with narrower jaws gives perfect accessibility, even in cramped corners. Patented progressive teeth angled aggressively inwards, fine at the inner part of the jaws and larger at the other part gives a better grip on all sizes of pipes.The inner handle with built-in protection against pinching and a safety stop for the adjusting nut. Conforms to DIN 5234 standards.Max jaw capacity: 2 1/2in Pipes up to: 1 1/2in Length: 430mm (17in)
IRWIN Vise-Grip adjustable wrenches have both a metric and imperial jaw width indicator and offers easy adjustment and the parallel jaws have a smooth surface to assist a secure grip and help prevent scratches. The pull opening adjusting mechanism gives quick and easy fine adjustment and is made from chrome vanadium steel for a durable wrench. Moulded 1 Component Handle - Comfortable, Pull-resistant Handle.Length: 200mm (8 in).Capacity: 28mm.
The Monument Thin Jaw Adjustable Wrench with a slim head for easy access to fittings, tap cartridges, nuts etc. in confined spaces. Ideal for the fitting and removal of radiator bleed valves, as well as tap cartridges where the complete removal of the shroud is not possible.The Monument Thin Jaw Adjustable Wrench has the following specification: Size: 200mmCapacity: 38mm
The ITL Insulated Adjustable Wrenches with injection moulded nylon 11 handles, which exceed the requirements of IEC 60900, the industry standard for live line working. In addition, these tools meet the requirements of Category 'C', which requires them to perform at extreme temperatures of -40°C to +70°C, making them unique in this category. These insulated tools are the toughest in the market, being virtually indestructible. With a lifetime warranty on the tool and insulation, plus a 30 day no quibble money back guarantee.International Insulated Adjustable Wrench. Size: 200mm (8in).
The ITL Insulated Adjustable Wrenches with injection moulded nylon 11 handles, which exceed the requirements of IEC 60900, the industry standard for live line working. In addition, these tools meet the requirements of Category 'C', which requires them to perform at extreme temperatures of -40°C to +70°C, making them unique in this category. These insulated tools are the toughest in the market, being virtually indestructible. With a lifetime warranty on the tool and insulation, plus a 30 day no quibble money back guarantee.International Insulated Adjustable Wrench. Size: 300mm (12in).
Bahco Professional Stillson Type Pipe Wrench forged from high quality steel. Both jaws have deep grooves ensuring instant grip and ratcheting action. Can be used with copper, aluminium, ferrous and non-ferrous metals.Size: 600mm (24in).Capacity: 76mm.
Bahco Professional Stillson Type Pipe Wrench forged from high quality steel. Both jaws have deep grooves ensuring instant grip and ratcheting action. Can be used with copper, aluminium, ferrous and non-ferrous metals.Size: 450mm (18in).Capacity: 60mm.
The RIDGID Strap Wrenches are best for any polished pipe. They have a sturdy, cast-iron housing with an I-beam handle and a strong, woven nylon strap that gives a tight grip. Two models available with special strap for plastic pipe.RIDGID No.2 Strap Wrench Handle Length: 300mm (11.3/4in).Strap Length: 760mm (30in).Strap Width: 30mm (1.1/8in).Rated Pipe Capacity: 50mm (2in).Actual O.D. Capacity: 135mm (5.1/2in).Weight: 0.8kg. Rated Pipe Capacity is the nominal diameter that can be correctly tightened.Actual O.D. Capacity is the actual O.D. that strap can accommodate.
Bahco Professional Stillson Type Pipe Wrench forged from high quality steel. Both jaws have deep grooves ensuring instant grip and ratcheting action. Can be used with copper, aluminium, ferrous and non-ferrous metals.Size: 900mm (36in).Capacity: 102mm.
Bahco spare part kits for the adjustable wrench 80 and 90 Series, this set contains roll, pin and a spring. They are left-hand screw. Finish: Phosphated.
Bahco spare part kits for the adjustable wrench 80 and 90 Series, this set contains roll, pin and a spring. They are left-hand screw. Finish: Phosphated.
Bahco spare jaw suitable for the series 80 and 90 adjustable wrenches. Left-hand screw. Finish: Phosphated.Bahco 8071-1 Spare Jaw Only Fits: 8071, 8071 C, 9071, & 9071 C.
The RIDGID Grip Wrenches are fitted with two handles and heavy-duty jaws, they can handle a multitude of different diameters. Adjust the bolt on the bottom handle to the require size and then it can be locked in place.RIDGID 1143 Grip Wrench Length: 545mm (21.1/2in).Capacity: 65mm (2.1/2in).Weight: 2.8kg.
The RIDGID Aluminium RapidGrip® Wrench has all the great benefits of the heavy-duty RapidGrip® wrench but it is 35% lighter than heavy-duty models. It offers quick one-handed operation with a spring-loaded jaw design that provides rapid ratcheting action. The unique combination heel/hook jaw design bites the workpiece aggressively and ensures a secure grip.The RIDGID Aluminium RapidGrip® Wrench Specification: Size: 350mm (14in)Capacity: Pipe: 50mm (2in), Fittings: 40mm (1.1/2in)Weight: 0.9kg
The Footprint Pipe Wrenches have drop forged hooks and are fitted to a pressed steel frame. The teeth are induction hardened to ensure a high grip is maintained. This traditional plumber's tool is an all purpose wrench which grips the workpiece tighter as more pressure is exerted. Removable screw for easy adjustment. This style has a screwdriver end on the handle.The Footprint 6989w Pipe Wrench has the following specifcation: Length: 230mm (9in).Jaw Capacity: 48mm.
IRWIN Vise-Grip adjustable wrenches have scales in both a metric and imperial on their jaws. The parallel jaws have a smooth surface to provide a secure grip and to help prevent scratches. The quick adjusting jaw opening mechanism allows easy, one-handed, fine adjustment. This durable wrench is made from chrome vanadium steel for a durable wrench.10508161: Length: 150mm, Capacity 25mm.
IRWIN Vise-Grip adjustable wrenches have scales in both a metric and imperial on their jaws. The parallel jaws have a smooth surface to provide a secure grip and to help prevent scratches. The quick adjusting jaw opening mechanism allows easy, one-handed, fine adjustment. This durable wrench is made from chrome vanadium steel for a durable wrench.10508158: Length: 300mm, Capacity 38mm.
This Teng Tools Industrial wrench is made of chrome vanadium steel for increased strength and durability. It exceeds international standards ISO 6787-1976, ASME B.107.8M-1996, BS6333-1995, DIN 3117-1988 and JIS B4604-1976. Graduated markings on the jaw allow the size of the fastening to be accurately measured and the wrench to be set at the right size. The 15 degree jaw angle allows the wrench to be used in narrow spaces as only 30 degrees turning is needed. The wider jaw opening increases the range of bolt sizes to be worked on. It is non-protruding on the moveable jaw end, which gives better action when space is limited. The handle provides a comfortable hand fit.The TEN4005 Adjustable Wrench has the following specifications: Length: 300mm (12 inch).Capacity: 38mm.Capacity AF: 1.1/2inch.
These Faithfull heavy-duty industrial tools known as 'Leader' pipe wrenches. They are used in civil engineering and are consequently made to conform to the most stringent specifications.The cast iron handle is a heavy 'I' beam construction to ensure maximum strength and rigidity under loading. The teeth on each jaw are hardened and tempered to resist wear. The design of this wrench allows a bigger jaw capacity than the 'Stillson' wrench. The lower jaw is precision seated to prevent harmful loading onto the retaining pin. Conforms to BS3594 part 1.Size: 300mm (12 in)Jaw capacity: 60mm (2 3/8 in)
