RIDGID Aluminium Offset Pipe Wrenches feature a jaw opening parallel to the handle and a narrower hook jaw head. This lightweight wrench provides easy entry into tight spots and is ideal for overhead applications.RIDGID Aluminium Offset Pipe Wrench Size: 450mm (18in).Capacity: 65mm (3.1/2in).Weight: 1.6kg.
The RIDGID Aluminium Straight Pipe Wrench has the same strength and durability as other RIDGID heavy-duty wrenches but are made from lightweight aluminium. That is nearly 40% lighter than the cast-iron wrench of the same size. The jaws are identical to the RIDGID heavy-duty wrenches.RIDGID Aluminium Straight Pipe Wrench Size: 900mm (36in)Capacity: 125mm (5in)Weight: 5.0kg
Bahco 80 Series Chrome Plated Finish Adjustable Wrenches with tapered jaws with a measurement scale on the fixed jaw. They have a 16º head angle with no protruding shank when fully open and a strong I section handle with a spring loaded square section, and a knurled adjusting nut.Overall length: 200mm (8 in).Jaw Capacity: 27mmWeight: 255g.Spare Adjustable Jaw BAH8071C-2 - Available to orderSpare Knurl Set: BAH8071C-95 - Available to order
The Monument Thin Jaw Adjustable Wrench with a slim head for easy access to fittings, tap cartridges, nuts etc. in confined spaces. Ideal for the fitting and removal of radiator bleed valves, as well as tap cartridges where the complete removal of the shroud is not possible.The Monument Thin Jaw Adjustable Wrench has the following specification: Size: 150mmCapacity: 34mm
This Teng Tools Industrial wrench is made of chrome vanadium steel for increased strength and durability. It exceeds international standards ISO 6787-1976, ASME B.107.8M-1996, BS6333-1995, DIN 3117-1988 and JIS B4604-1976. Graduated markings on the jaw allow the size of the fastening to be accurately measured and the wrench to be set at the right size. The 15 degree jaw angle allows the wrench to be used in narrow spaces as only 30 degrees turning is needed. The wider jaw opening increases the range of bolt sizes to be worked on. It is non-protruding on the moveable jaw end, which gives better action when space is limited. The handle provides a comfortable hand fit.The TEN4003 Adjustable Wrench has the following specifications: Length: 200mm (8 inch). Capacity: 28mm.Capacity AF: 1.1/2inch.
The Bahco 90 Series Black Phosphated ERGO™ Adjustable Wrenches have a 40% wider opening compared to a standard adjustable wrench of equivalent size. The head combines slimness for accessibility with strength for performance, this combined with a convenient length of the handle and low weight makes it perfect for plumbers and other tradesmen that carry their tools with them. The jaws are angled at 15° to provide maximum access in confined spaces. Precision-hardened and anti-corrosion treated. With comfortable slip free, warm thermoplastic handle. Left-reading, measurement scale in mm.The Bahco 9033 Adjustable wrench with metric mesurement scale. Precision-hardened and anti-corrosion treated with a phosphated finish and a comfortable warm thermoplastic slip-free handle. Maximum opening capacity: 46.5 mm Overall length: 250mm (10 in)
Bahco spare jaw suitable for the series 80 and 90 adjustable wrenches. Left-hand screw. Finish: Phosphated.Bahco 8074-1 Spare Jaw Only. Fits: 8074, and 8074 C.
The RIDGID Heavy-Duty Straight Pipe Wrench has a sturdy, cast-iron housing and I-beam handle with full floating forged hook jaw, featuring self cleaning threads with replaceable hook and heel jaws.Specification: Size: 250mm (10in)Capacity: 40mm (1.1/2in)Weight: 0.8kg
RIDGID Aluminium Offset Pipe Wrenches feature a jaw opening parallel to the handle and a narrower hook jaw head. This lightweight wrench provides easy entry into tight spots and is ideal for overhead applications.RIDGID Aluminium Offset Pipe Wrench Size: 600mm (24in).Capacity: 80mm (3in).Weight: 2.7kg.
The RIDGID Heavy-Duty End Pipe Wrenches are ideal for pipe work close to a wall, in tight quarters or in closely-spaced parallel lines. It has a sturdy cast-iron housing with an I-beam handle with full floating forged hook jaw and self-cleaning threads. The hook and heel jaws are replaceable.RIDGID Heavy-Duty End Pipe Wrench Size: 600mm (24in).Capacity: 80mm (3in).Weight: 4.4kg.
The RIDGID Strap Wrenches are best for any polished pipe. They have a sturdy, cast-iron housing with an I-beam handle and a strong, and a strap designed for use with plastic pipe.RIDGID No.5P Strap Wrench has a strap designed for use with plastic pipe. Handle Length: 450mm (18in).Strap Length: 750mm (29.1/4in).Strap Width: 45mm (1.3/4in).Rated Pipe Capacity: 125mm (5in).Actual O.D. Capacity: 135mm (5.1/2in).Weight: 1.0kg. Rated Pipe Capacity is the nominal diameter that can be correctly tightened.Actual O.D. Capacity is the actual O.D. that strap can accommodate.
The RIDGID Strap Wrenches are best for any polished pipe. They have a sturdy, cast-iron housing with an I-beam handle and a strong, woven nylon strap that gives a tight grip. Two models available with special strap for plastic pipe.RIDGID No.5 Strap Wrench Handle Length: 450mm (18in).Strap Length: 750mm (29.1/4in).Strap Width: 45mm (1.3/4in).Rated Pipe Capacity: 125mm (5in).Actual O.D. Capacity: 175mm (7in).Weight: 0.9kg. Rated Pipe Capacity is the nominal diameter that can be correctly tightened.Actual O.D. Capacity is the actual O.D. that strap can accommodate.
The RIDGID Heavy-Duty Straight Pipe Wrench has a sturdy, cast-iron housing and I-beam handle with full floating forged hook jaw, featuring self cleaning threads with replaceable hook and heel jaws.RIDGID Heavy-Duty Straight Pipe Wrench Size: 150mm (6in)Capacity: 20mm (3/4in)Weight: 0.2kg
The RIDGID Heavy-Duty Straight Pipe Wrench has a sturdy, cast-iron housing and I-beam handle with full floating forged hook jaw, featuring self cleaning threads with replaceable hook and heel jaws.Specification: Size: 350mm (14in)Pipe capacity: 50mm (2in)
The RIDGID Heavy-Duty End Pipe Wrenches are ideal for pipe work close to a wall, in tight quarters or in closely-spaced parallel lines. It has a sturdy cast-iron housing with an I-beam handle with full floating forged hook jaw and self-cleaning threads. The hook and heel jaws are replaceable.RIDGID Heavy-Duty End Pipe Wrench Size: 150mm (6in).Capacity: 20mm (3/4in).Weight: 0.2kg.
Bahco 90 Series Chrome Plated ERGO™ Adjustable Wrenches with a comfortable, thermoplastic handle and larger grip width and tapered jaws with a measurement scale on the fixed jaw. They have a 16º head angle with no protruding shank when fully open and a strong I section handle with a spring loaded square section, and a knurled adjusting nut.Overall Length: 200mm (8 in).Jaw Capacity:27mm.Weight: 272g. Chrome plated finish.
These Faithfull heavy-duty industrial tools known as 'Leader' pipe wrenches. They are used in civil engineering and are consequently made to conform to the most stringent specifications.The cast iron handle is a heavy 'I' beam construction to ensure maximum strength and rigidity under loading. The teeth on each jaw are hardened and tempered to resist wear. The design of this wrench allows a bigger jaw capacity than the 'Stillson' wrench. The lower jaw is precision seated to prevent harmful loading onto the retaining pin. Conforms to BS3594 part 1.Size: 450mm (18 in)Jaw capacity: 76mm (3 in)
The Stanley Dynagrip Ratcheting Wrench with self ratcheting action, for faster tightening of fasteners. No need to remove from fastener while tightening or loosening. Its cushion Jaw prevents damage to fastener in use. Easy to engage all sizes of fastening within size range. Capacity: 17-24mm.Length: 265mm.
Bahco 90 Series Phosphated Finish ERGO™ Adjustable Wrenches with a unique reversible jaw and comfortable thermo plastic handle and larger grip width. In one position it is a conventional adjustable wrench, but with the jaw reversed it becomes a serrated jaw pipe wrench.Length. 300mm (12 in).Jaw Opening. 34mm.Weight. 690g.
This Teng Tools Industrial wrench is made of chrome vanadium steel for increased strength and durability. It exceeds international standards ISO 6787-1976, ASME B.107.8M-1996, BS6333-1995, DIN 3117-1988 and JIS B4604-1976. Graduated markings on the jaw allow the size of the fastening to be accurately measured and the wrench to be set at the right size. The 15 degree jaw angle allows the wrench to be used in narrow spaces as only 30 degrees turning is needed. The wider jaw opening increases the range of bolt sizes to be worked on. It is non-protruding on the moveable jaw end, which gives better action when space is limited. The handle provides a comfortable hand fit.The TEN4005 Adjustable Wrench has the following specifications: Length: 300mm (12 inch).Capacity: 38mm.Capacity AF: 1.1/2inch.
