The Kidde 10LLCO Carbon Monoxide Alarm is a sleek, lightweight carbon monoxide (CO) alarm with a non-replaceable, sealed-in Lithium battery which provides 10 years of continuous protection, meaning that the battery will not have to be changed for the duration of the alarm's life. The alarm has a unique water-based Kidde CO Electrochemical Sensor and features an alarm memory, meaning that a red LED will flash every 60 seconds to indicate a CO 'event' has occurred. A CO 'Quick-Test' feature temporarily desensitises the CO sensor to allow quick-testing using approved CO sprays. An interrogation feature allows peak level, test history to be analysed by Kidde upon arrangement. The alarm has 3 LEDs - alarm, operate and fault. It's end-of-life alarm alerts the user to replace the alarm. A test/reset button allows regular testing of the alarm function. This slim, easy-to-use alarm is ideal for use in all living areas and can be installed on a wall or ceiling or used free-standing on a table or shelf. It is also easily portable so can be taken away on holidays. BSI Certified to EN52091-1.CE Tested & Certified.
The DEWALT TOUGHSYSTEM™ Bracket Pair for securing stacked TOUGHSYSTEM™ cases. They are fully height adjustable and can carry up to 60kg (132lb) per pair. Supplied as a pack of 2.
The Bollé Safety CONTOUR Safety Glasses are protective glasses, which have a solid, comfortable and lightweight design. The frames have non-slip TIPGRIP temples, and an adjustable non-slip nose bridge. The lenses have an anti-scratch and anti-fog Platinum® Coating. Supplied with a microfibre pouch for storage.These Bollé Safety CONTOUR Safety Glasses have smoke colour lenses. They are approved for permanent wear and certified with perfect optical quality. Designed and used for protection against UVA/UVB and solar radiation, 99.9% UVA/UVB protection. Specification Lens Type: Smoke, Anti-Fog and Anti-scratch.Lens Conforms to: EN1661F/EN172-Solar 5-2.5.Frame Conforms to: EN166FT.
The Bollé Safety COBRA Safety Glasses offer a 180° panoramic visual field with perfect optical quality. The glasses have removable temples to allow easy transformation into safety goggles by attaching a foam and strap kit (BOLKITCOBRA). This means that Cobra is an ultra versatile model.These Bollé Safety COBRA Safety Glasses have clear lenses with Platinum® anti-scratch and anti-fog coating. Approved for permanent wear and certified with perfect optical quality with anti-fog and anti-scratch coatings, 99.9% UVA/UVB protection. Specification Lens Type: Clear, Anti-Fog and Anti-Scratch.Lens Conforms to: EN1661B/EN172-Solar 5-3.1.Frame Conforms to: EN166F.
The Moldex Compact Masks are a maintenance free half mask with horizontally shaped integrated filters and a low profile design for excellent field of vision. It can be worn with other safety equipment, including face shields, welding helmets and goggles. The pleated filter technology reduces breathing resistance and increases the service life of the particulate filters, making this mask extremely comfortable, cost effective and durable. Conforms to EN405:2001+A1:2009 and provides protection against gas, vapour and dust. 5120: Protection level: FFA1P2 R D.5230: Protection level: FFA2P3 R D.5330: Protection level: FFABE1P3 R D.5430: Protection level: FFABEK1P3 R D.The Moldex A1 P2 Compact Mask conforms to EN405:2001+A1:2009 and provides protection against gas, vapour and dust. The mask has an innovative FlexFit in the nose area that provides a secure and comfortable fit. The mask body is smooth and gentle on the skin and automatically adjusts to different face shapes and their movements. Protection level: FFA1P2 R D.
This toolbox combines metal walls with a protective plastic base and edges. The top has a V-groove to hold timber or pipes in place for cutting. It also has a fold flat, soft grip handle. Heavy-duty metal catches provide secure locking.
A 45-piece kit supplied in a weatherproof four pocket travel bag with handle and belt clips. Suitable for use in the home and outdoors to treat burns, grazes and cuts. Contents: 1 x Triangular Bandage1 x Finger Dressing2 x Eye Wash 20ml10 x Assorted Clear Waterproof Plasters1 x Conforming Stretch Bandage1 x Medium Dressing2 x Burns Sachets2 x Burns Bandages2 x Adhesive Wound Dressings4 x Assorted Double Sided Non Adherent Wound Dressings5 x Pairs Disposable Vinyl Gloves1 x ReviveAid Mouth Piece4 x Moist Wipes1 x Pair of Scissors1 x Microporous Tape6 x Safety Pins
Highest quality assorter cases made of strong and durable polycarbonate for the professional. The design incorporates a double skin wall, superior hinges and a clear visibility lid. A reliable and secure one-handed locking mechanism in conjunction with a profiled lid ensures contents do not spill in transportation. Supplied with three identification tags for ease of retrieval and recognition. Box dimensions: 55mm x 421mm x 361mm.Contains 45 removable inserts of equal size.
Scan Max. Dexterity Nitrile Gloves have a micro thin nitrile foam coating and 18 gauge ultra thin nylon liner. This allows these gloves to have maximum dexterity and feel, making them ideal for precision work and light-duty handling. They have excellent breathability and superb comfort qualities. Ideal for use in petrochemical, painting, printing, agriculture and auto machinery maintenance industries. Conform to EN 420 and EN 388 Standards. Abrasion Performance Index (1-4): 3Blade Cut Performance Index (1-5): 1Tear Performance Index (1-4): 2Puncture Performance Index (1-4): 11 x Pair of Scan Max. Dexterity Nitrile Gloves - Large (Size 9)
The DEWALT Reinforcer™ Safety Glasses feature ToughCoat™ hard coated lenses, that provides tough protection against scratches. The distortion free lenses reduce eye fatigue and are made from polycarbonate, to protect against impact resistance. The rubber-tipped temples provides a secure, comfortable fit whilst the soft, rubber nosepiece offers maximum all-day comfort. Conform to EN1661F standards. Offer 99.9% UVA/UVB Protection.These DEWALT Reinforcer™ Safety Glasses have Fire Mirror lenses.
The Bollé TRACKER Safety Goggles provide protection from all mechanical risks and also chemical risks. The goggles are very comfortable, and have a removable adjustable strap for secure fitting. The foam reinforcement is also removable and provides indirect ventilation. Protection is offered from above, below and sides. The lenses have an anti-scratch and anti-fog Platinum Coating. Resistant to medium energy impacts (121m/s).The BOLTRACPSF TRACKER Safety Goggles have the following specifications: Lens: Colour: Smoke.EN1661BT/EN172-Solar 5-2.5.Anti-scratch and anti-fog. Frame: EN166FT.
These Vitrex P2 Replacement Filters are designed to fit the Vitrex Twin Filter Respirator (VIT331300). The filters protect lungs against fine toxic particles and are ideal for use with MDF, hardwoods, fibreglass and most power tools. Conform to EN140 1988, EN143:2000 FFP2.
This toolbox combines metal walls with a protective plastic base and edges. The top has a V-groove to hold timber or pipes in place for cutting. It also has a fold flat, soft grip handle. Heavy-duty metal catches provide secure locking.
Scan Knitshell Latex Palm Gloves are an essential garment for the protection of hands and offer maximum user comfort. Ideal for many work situations, they provide protection against minimal cuts and abrasions. The gloves have a durable non-slip latex coating which provides excellent protection and grip. Knitted wrists ensure comfort. Conform to EN420 and EN388 Standards. Abrasion Performance Index (1-4): 2Blade Cut Performance Index (1-5): 1Tear Performance Index (1-4): 4Puncture Performance Index (1-4): 112 x Pairs of Scan Knitshell Latex Palm Gloves Size 8 Medium
The DEWALT DPG82-11D Concealer Goggles have a soft rubber nose piece and a hand grip pattern on the temple. They have scratch resistant, hard coat polycarbonate lens with an anti-fog coating. This distortion free lens offers 99.9% UVA & UVB protection. EN Test: EN 166-1FSafety Rating: E3
The Kuny's AP-622a Carpenter's apron is made from durable split grain leather with contrasting black stitching, rivets and hammer holders. It has carry handles to allow easy handling/storage and a 2in wide heavy nylon belt with double rivets at all stress points. - 5 Reversed nail pockets for easy access. - 2 Large and 3 Small. - Deep centre pocket for tape etc.- 2 Heavy Steel Hammer Holders. - 6 Utility pockets for pencils, markers etc.
The DEWALT Reinforcer™ Safety Glasses feature ToughCoat™ hard coated lenses, that provides tough protection against scratches. The distortion free lenses reduce eye fatigue and are made from polycarbonate, to protect against impact resistance. The rubber-tipped temples provides a secure, comfortable fit whilst the soft, rubber nosepiece offers maximum all-day comfort. Conform to EN1661F standards. Offer 99.9% UVA/UVB Protection.These DEWALT Reinforcer™ Safety Glasses have Smoke lenses.
Irwin I-Gel Knee pads are designed to put maximum protection where it is needed most. The built-in flexibility of knee pads provide long-lasting comfort. Embedded I-Gel insert provides maximum impact resistance. The non-marring cap will not damage surfaces.
This Scan Safety sign is made from 1mm thick, durable PVC. It's aggressive water-based adhesive enables the sign to easily stick on to and remain on any wall. It is printed using UV resistant inks, which resist fading. It is easy to see. Complies with BS5499 and/or ISO7010 design criteria where applicable.Helps limit company liability should an accident occur. The SCA1521 safety sign has the following specifications:Size: 200 x 300mmImage: Arrow symbol.
This Scan high intensity safety sign is made from 1.3mm thick, rigid material. It is printed using UV resistant inks, which resist fading. The background of this sign is photoluminescent, which means that is glows and can be seen in the dark. It is non toxic, non radioactive with no lead of phosphorous. The sign is easy to read with clear instruction and illustration.Exceeds PSPA Class 1 classificationComplies with BS5499 and/or ISO 7010 design criteria where applicable. The SCA0202 safety sign has the following specifications:Size: 200 x 300mmMessage: This sign details a fire action procedure, including spaces to write the Fire Brigade phone number, and point of assembly.
This Scan Hazard Diamond Sign is made from self-adhesive vinyl. It should be applied to clean, flat/smooth surfaces. Hazardous substance labels must be displayed to warn of hazardous material contained therein. Size: 100 x 100mm.Message: 'Non Flammable Compressed Gas'
The Bahco 4750-HDLB-1 Heavy-Duty Part Leather Belt has a durable, long lasting design with strong industrial stitching and rust proof fittings. Made of extra strong leather, woven material and riveted for additional strength. The belt is embossed with the Bahco logo.Fits waists 32-48in.
DEWALT DS450 TOUGHSYSTEM™ 2.0 Mobile Storage with a detachable telescopic handle for easier storage and transportation. It also features durable 200mm (8in) PU wheels, ideal for use on difficult sites. The box lid has a high-performance seal, making it dust-tight and waterjet resistant (IP65) to withstand the most severe weather. With easy close, metal wire front latches for easy one-handed operation. A metal-reinforced padlock eye provides increased security. Fitted with strong, ergonomic handles for more comfortable transportation. Auto Stacking Latches are intuitive and easy to use, allowing TOUGHSYSTEM™ modules to be connected together. These newer style latches are compatible with older TOUGHSYSTEM™ modules. DEWALT Tracker compatible, an internal fixing point allows the DEWALT Tracker to be installed and the box tracked via the DEWALT Tool Connect App. There is also a handy name panel insert, this allows boxes to be labelled for easy identification. Specification: Depth: 685mm.Width: 554mm.
This Scan Industrial Safety Helmet is manufactured from high density polyethylene to provide excellent head protection. Head protection is essential for site workers for protection from falling objects or striking against fixed obstacles. This helmet features a rain gutter to channel water away from the helmet and face. Easily adjustable to fit head size of between 530 and 630mm. Conforms to EN397:1995 + A1:2000 Helmet Weight: 340g.1 x Scan Safety Helmet Red
The DEWALT Easton Performance T-Shirt has a fast drying, lightweight design with vented sides, ideal for those warm days at work. The T-Shirt has a nice fitted shape and incorporates a reflective DEWALT and Guaranteed Tough logo. Made from 100% polyester.1 x DEWALT Easton Lightweight Performance T-Shirt Extra Large (48in)
The DEWALT Typhoon T Shirt has a ribbed crew neck and set in sleeve to ensure maximum comfort, whilst a twin needled hem and cuff ensure durability. The DEWALT brand is displayed discreetly across the chest, with an integrated back neck hanger loop for convenient storage. Material Composition: 65% Polyester, 35% Cotton.1 x DEWALT Typhoon Charcoal Grey T Shirt X Large (48in Chest)
The DEWALT Cheverley Shorts have a durable, rip-stop fabric base, double folded hem and double stitched seams for increased durability and wear. Fitted with a zip fly and top button. It features a variety of reinforced holster, cargo and back pockets. There is also several holster style pockets, enabling you to keep in use tools close to hand. Material Composition: 65% Polyester, 35% Rip-Stop Cotton.1 x Pair of DEWALT Cheverley Lightweight Grey Polycotton Shorts Waist 40in
The Apache Rip-Stop Holster Shorts offer a functional option on warmer days. They are made from a lightweight Rip-Stop polycotton with Cordura holster pockets and a low rise comfort fit waist. Other features include: two rear hook & loop pockets, a side cargo pocket (left leg), large phone pocket (right leg), tunnel belt loop and YKK zip. They are available in waist sizes 30 to 42 inch. Material Weight: 255g.Material Composition: 65% Polyester, 35% Cotton.1 x Pair of Apache Grey Rip-Stop Holster Shorts Waist 30in
The Apache Rip-Stop Holster Shorts offer a functional option on warmer days. They are made from a lightweight Rip-Stop polycotton with Cordura holster pockets and a low rise comfort fit waist. Other features include: two rear hook & loop pockets, a side cargo pocket (left leg), large phone pocket (right leg), tunnel belt loop and YKK zip. They are available in waist sizes 30 to 42 inch. Material Weight: 255g.Material Composition: 65% Polyester, 35% Cotton.1 x Pair of Apache Grey Rip-Stop Holster Shorts Waist 36in
The DEWALT Easton Performance T-Shirt has a fast drying, lightweight design with vented sides, ideal for those warm days at work. The T-Shirt has a nice fitted shape and incorporates a reflective DEWALT and Guaranteed Tough logo. Made from 100% polyester.1 x DEWALT Easton Lightweight Performance T-Shirt Medium (42in)
The DEWALT Easton Performance T-Shirt has a fast drying, lightweight design with vented sides, ideal for those warm days at work. The T-Shirt has a nice fitted shape and incorporates a reflective DEWALT and Guaranteed Tough logo. Made from 100% polyester.1 x DEWALT Easton Lightweight Performance T-Shirt Large (46in)
