Available in 6 sizes and manufactured from robust polypropylene, these sturdy interlocking storage bins can be stacked to provide a versatile storage solution for a variety of both small and large parts. A wall mounting panel suitable for use with these bins is also available - Part number: FAITBPANELStorage bin Size 2L Size 116 x 212 x 75mm
Available in 6 sizes and manufactured from robust polypropylene, these sturdy interlocking storage bins can be stacked to provide a versatile storage solution for a variety of both small and large parts. A wall mounting panel suitable for use with these bins is also available - Part number: FAITBPANELStorage bin Size 3 170 x 240 x 126mm
The Faithfull Double Scaffold Spanner Holder, made to a high specification using quality heavy-duty hide. Made to last and provide dependable service. Two loops for scaffold spanners or socket bars. Fits most belts. Size: 150 x 100mm (6 x 4in).
The Kunys CLC 145 Tradesman Flex Grip gloves have a Syntrex™ synthetic palm material for increased abrasion and tear resistance. With reinforced padded palm and fingertips for enhanced wear and durability. Padded fingers and knuckles which provide protection against bumps. Stretch-Fit™ thumb allow for a better fit and greater flexibility and the full neoprene cuff has a medical grade hook & loop closure. The textured pull-on tab with the Terry-Flex™ thumb helps gently remove sweat or debris from the face.
The Kuny's drywall Pouch with no hammer holder loop. Ideal for use when fitting plasterboard as there are no hard surfaces to cause damage. Made from durable split grain leather. Three pouches. (Large, Medium and Small) reversed for easy access. Rivet reinforced at all stress points. Fits any belt up to 76.2mm (3in) wide.
The Scan SpillTrapper® is designed to catch spills and leaks from machinery, tanks, and various other equipment on site avoiding any unwanted contamination. It absorbs oils, fuels and other hydrocarbon liquids. The spill trap has a hydrophobic inner material meaning rainwater cannot be absorbed in use. A tray is not required due to the additional oil retention properties and there is no concern for any pooling. The trap has a non-slip vinyl base and features eyelets in each corner, allowing for the product to be pegged to the ground or for hanging.
Scan Large Spill Trap. 98 x 146cm in size with a 32 litre capacity and will absorb oils, fuels and other hydrocarbon liquids.
The Kuny's Journeyman Half Apron is made from all weather logger tan leather and features a back wall pocket and side tool holder. Comprises extra large main pouch with large reversed front pouch, easy accessible top pouch together with three small utility pockets, three back wall pockets and additional side tool slots for other tools. Fits belt sizes up to 88.9mm (3.1/2in) wide.
The DEWALT Radial Safety Brown Boots have a full grain, distressed brown (Crazy Horse), waxy leather upper. With elasticated sides and 2 woven pull loops to the front and rear for easy putting on/removal. They are fitted with a steel toecap that has been tested to 200 Joules. Also a steel midsole for underfoot protection. Fitted with a comfort insole for all day comfort with a Phylon/rubber outsole. EN Test: CE EN ISO 20345-2011.Safety Rating: SBP.Slip Rating: SRA.1 x Pair of DEWALT Radial Safety Brown Boots UK 9 Euro 43
The Bollé TRACKER Safety Goggles provide protection from all mechanical risks and also chemical risks. The goggles are very comfortable, and have a removable adjustable strap for secure fitting. The foam reinforcement is also removable and provides indirect ventilation. Protection is offered from above, below and sides. The lenses have an anti-scratch and anti-fog Platinum Coating. Resistant to medium energy impacts (121m/s).The BOLTRACPSJ Tracker Safety Goggles have the following specifications: Lens: YellowEN1661BT/EN172-Solar 5-1.4.Anti-scratch and anti-fog. Frame: EN166FT.
The Scan Moulded Valved Mask has been developed to improve the comfort of disposable respirators, whilst maintaining an excellent face fit. The mask's mesh shell helps to support the filter and helps to maintain its shape, preventing collapse onto the face. The mask has a high resistance to clogging for protection against very fine particles, fumes and mist, with an exhalation valve that makes breathing easier. It has an adjustable nose clip, soft foam nosepiece, non-irritating inner face piece and elasticated retaining straps. The mask has passed the optional Dolomite clogging test, giving the user better breathing resistance for longer. Suitable for use with:Brick dustConcrete and plasterSoft and hard woodMDF dustMasonry / concrete dustMetalworking with power toolsLoft insulation / fibreglassMineral fibresSilica. Pack of 2.
These Stanley Iowa Holster Trousers have the following specification: Colour: Black Waist: 40in Leg: 33in These Stanley Iowa Holster Trousers have a 'classic' fit. Durable Cordura® knee pad pockets allow you to add knee pads, increasing comfort when working on your knees. They have multiple cargo pockets making them good, all-round, functional work trousers. There is also a handy ruler pocket.
The Moldex Classic Series FFP1 NR D Valved Masks are durable and comfortable. This dual-purpose mask is ideally suited to most industrial applications. The loop strap makes putting the mask on and taking it off very easy. The ActivForm® seal automatically adjusts to different face shapes and sizes with no need for metal nose clips. FFP1 NR D for protection against non-toxic dusts, mists and fumes based on water and oil.4 x Workplace exposure limitEN149:2001 and A1:2009 Supplied as a Pack of 20
The DEWALT Laser Safety Hiker Boots have full grain leather uppers with a breathable, waterproof comfort insole for comfortable all day wear. The padded tongue and collar provide additional comfort. Has a 200 Joule steel toecap, with a steel midsole for underfoot protection. The TPU dual density outsole is anti-static. EN Test: CE EN ISO 20345-2011.Safety Rating: S1P.Slip Rating: SRA.1 x Pair of DEWALT Laser Safety Hiker Black Boots UK 6 Euro 39/40
The DEWALT Newark Waterproof Safety Hiker Boots have a full grain leather upper with a Samsung waterproof and breathable membrane and a PU comfort insole. The TPU sole is resistant to petrol, chemical’s, oil and temperatures up to 120°C. It also features an anti-Scuff toe guard. The sole is anti-static for increased user protection. The boots have a lightweight and flexible design with shock absorption and a steel toecap that offers protection of up to 200 Joules. There is also a steel midsole for underfoot protection. Available in Black or Brown. EN Test: CE EN ISO 20345-2011.Safety Rating: S3 WR.Slip Rating: SRA.The DEWALT Newark S3 Waterproof Safety Hiker Boots have the following specification: Colour: Brown.Size: UK 10 Euro 44.
The FatMax® Tote is constructed from extra tough 600 x 600 denier fabric. It offers maximum tool protection thanks to its rigid and waterproof plastic bottom, reinforced stress points and industrial leather provides extra strength and carry comfort. A heavy-duty steel handle with rubber grip makes lifting more secure and comfortable. The open structure makes for quick and easy tool access as it keeps everything in place; with non-slip rubber straps for spirit level storage and a large side pocket for cable. Internal tool loops, covered compartments (including one with a drill bit holder inside), durable saw storage pocket and a steel holder for a measuring tape. Dimensions: 46 x 25 x 33cm.
A strong, durable non-adhesive PVC tape used for marking out or cordoning off areas.The highly contrasting coloured stripes serve as a clear visual warning and also present a barrier to areas that require to be sectioned off. Suitable for a wide range of uses in various trades and services that include, construction sites, factories, warehouses, emergency services and many other situations where safety of personnel is a priority.Width: 70mmLength: 500MColour: Red & White
The DEWALT Challenger Sympatex Waterproof Hiker Boots have a full grain nubuck leather upper with a Sympatex waterproof and breathable membrane. The TPU sole is resistant to petrol, chemicals, oil and temperatures up to 120°C. The sole is anti-static for increased user protection. The boots have a lightweight and flexible design with shock absorption and a steel toecap that offers protection of up to 200 joules. There is also a steel midsole for underfoot protection and a dual density anti-bacterial insole. Available in Black or Brown. EN Test: CE EN ISO 20345-2011.Safety Rating: S3-WR.Slip Rating: SRA.The DEWALT Challenger Sympatex Boots have the following specification: Colour: Black.Size: UK 7 Euro 41.
The DEWALT Rigger Gloves come with reinforced double leather palms, a leather knuckle strap and reinforced finger tips. They also have tough grip double stitching and rubberised safety cuffs. Specification: Size: Large
Plastic slatted wall panel allowing various combinations of Faithfull Interlocking Storage Bins, parts boxes to be wall mounted. Boards can be linked together.Ideal for use in both professional workshops or for home storage. Panel size: 345 x 383mm.
Scan self-adhesive sign with black text/graphic. Printed using UV resistant inks. Available in a polished brass or polished chrome effect. Please note polished chrome effect signs are not recommended for exterior use. Size: 50 x 200mm.Polished brass effect self-adhesive sign with black text/graphic. Printed using UV resistant inks. Size: 50 x 200mm.
The Scan Banded Foam Ear Bud is fitted with round earplugs that are made from a polymer foam and mounted onto a headband for an enhanced and secure fit. It has an SNR of 27 dB reduction. This will significantly reduce the ambient noise levels surrounding the user, offering additional protection. The protection level and lightweight construction makes them the ideal product to be worn for long periods of time. Recommended shelf life of 3 years. Conforms to EN 352-2.
The DEWALT Gel Palm Power Tool Gloves with silicon gel pads to reduce vibration and neoprene knuckle straps for added protection. Wipe pad for brow, rubber grip to finger tips for grip, spandex back for breathability, neoprene in fingers for fit/breathability, elasticated cuff and synthetic leather palm for durability.
The DEWALT Challenger Sympatex Waterproof Hiker Boots have a full grain nubuck leather upper with a Sympatex waterproof and breathable membrane. The TPU sole is resistant to petrol, chemicals, oil and temperatures up to 120°C. The sole is anti-static for increased user protection. The boots have a lightweight and flexible design with shock absorption and a steel toecap that offers protection of up to 200 joules. There is also a steel midsole for underfoot protection and a dual density anti-bacterial insole. Available in Black or Brown. EN Test: CE EN ISO 20345-2011.Safety Rating: S3-WR.Slip Rating: SRA.The DEWALT Challenger Sympatex Boots have the following specification: Colour: Brown.Size: UK 12 Euro 46.
This Scan Hazard sign is made from 1mm thick, durable PVC. It's aggressive water-based adhesive enables the sign to easily stick on to and remain on any wall. It is printed using UV resistant inks, which resist fading. It is easy to read with clear instruction and illustration. Complies with BS5499 and/or ISO7010 design criteria where applicable.Helps limit company liability should an accident occur. The SCA0954 safety sign has the following specifications:Size: 200 x 300mmMessage: 'Danger Forklift trucks'.
Scan self-adhesive sign with black text/graphic. Printed using UV resistant inks. Available in a polished brass or polished chrome effect. Please note polished chrome effect signs are not recommended for exterior use. Size: 50 x 200mm.Polished chrome effect sign with black text/graphic. Printed using UV resistant inks. Please note this material is not recommended for exterior use. Size: 50 x 200mm.
The Faithfull Zip Top Holdall is made from a strong durable canvas featuring reinforced handles, heavy-duty zip fastener and a studded fibreboard base, end pockets and a level holder. A good quality general-purpose holdall.1 x Faithfull Zip Top Holdall 75cm (30in).
Sets of non interlocking zinc stencils. Useful for making signs and marking cartons and packing cases.Number set contains 9 pieces with the 6 being reversible for 9. Size: 4in
Scan Vibration Resistant Latex Foam Gloves have a 7 gauge polyester outer with a cotton liner, meaning this mixed shell glove not only absorbs the wet well, but is also durable under all conditions. The latex foam padding on the palm absorbs vibration, and the fingertip seams are glued for added resistance. Ideal for use with power tools and other equipment within industrial, agricultural or commercial environments. Conform to EN 420 and EN 388 Standards. Abrasion Performance Index (1-4): 1Blade Cut Performance Index (1-5): 1Tear Performance Index (1-4): 2Puncture Performance Index (1-4): X (not tested)1 x Pair of Scan Vibration Resistant Latex Foam Gloves - Extra Large (Size 10)
The Scan Safety Wellingtons have been specially adapted and are ideal for use in workplaces where resistance to penetration by liquids and hard objects are high priorities. They are made with a high grade blend of PVC and nitrile rubber and are resistant to ISO 6112 chemicals and oils. Anti-static, energy absorbent soles provide comfort, strength, durability and slip resistance. The boots have a steel midsole and their steel toecaps have 200 joule rating. The soles are oil, acid, alkaline, heat (180°C) and penetration resistant. Conform to EN20345-S5 standards.1 x Pair of Scan Safety Wellingtons UK 7 Euro 41
