The DEWALT Krypton PU Sports Safety Trainers have a lightweight PU moulded upper with a comfort insole, padded tongue and collar for increased all day comfort. Has a 200 Joule steel toecap, with a composite midsole for underfoot protection. Also has a Phylon/rubber outsole. EN Test: CE EN ISO 20345-2011.Safety Rating: SBP.Slip Rating: SRA.1 x Pair of DEWALT Krypton PU Sports Safety Trainers UK 7 Euro 41
Sets of non-interlocking zinc stencils in a range of sizes. Useful for making signs and marking cartons and packing cases.Letter set contains - 27 pieces consisting A to Z Letter Size: 4in
These Scan A1 Replacement Cartridges are suitable for Scan Twin Half Mask Respirators (SCAPPERESPA1 and SCAPPERESPP2). The filter provides low efficiency protection, and suitable for use with organic vapours and gases. Conform to EN14387:2004
These Scan Black PU Coated Gloves are made from knitted nylon with a seamless finish and a fine polyurethane coating over the palm and fingers. The back of the glove is uncoated to provide ventilation to the hand, avoiding perspiration and clamminess. These gloves are suited to work where a high level of dexterity is needed along with a good protection factor. Typical applications include packing, inspection and fine component assembly operations. Conform to EN420 and EN388 Standards. Abrasion Performance Index (1-4): 4Blade Cut Performance Index (1-5): 1Tear Performance Index (1-4): 3Puncture Performance Index (1-4): 112 x Pairs of Scan Black PU Coated Gloves Size 9 Large
The Faithfull heavy-duty suede nail pouch divided into two pockets.Double stitched for strength and rivet reinforced at stress points.Complete with webbing belt. Size: 250 mm x 380 mm (10in x 15in)
These Scan kneepads are made from thick moulded foam and have elastic straps with hook & loop fastening. They provide comfort and protection and are ideal for laying carpet, laminate flooring, loft insulation, gardening, car maintenance etc.
This Scan Hazard sign is made from 1mm thick, durable PVC. It's aggressive water-based adhesive enables the sign to easily stick on to and remain on any wall. It is printed using UV resistant inks, which resist fading. It is easy to read with clear instruction and illustration. Complies with BS5499 and/or ISO7010 design criteria where applicable.Helps limit company liability should an accident occur. The SCA0750 safety sign has the following specifications:Size: 200 x 300mmMessage: 'Danger Electric shock risk'.
The Faithfull 10 Pocket Leather Tool Roll is manufactured from high-quality leather. Contains ten pockets of various sizes and is ideal for storing small tools such as chisels, auger bits, screwdrivers and spanners. It has a stud fastening system for ease of use. Note: Tools NOT included.
The Scan Chukka Safety Boots are popular with users in the construction, agriculture and engineering industries. They have grained leather uppers that offer excellent resistance against abrasion. With anti-static, energy absorbent polyurethane soles for comfort, strength and durability. The padded ankle collars provide additional comfort whilst the steel toecaps and midsole provide protection. The soles are resistant to oil, acid, alkaline, heat (180°C) and penetration. EN Test: CE EN ISO 20345-2011.Safety Rating: S1P.Slip Rating: SRC.1 x Pair of 4 D-Ring Chukka Black Safety Boots UK 9 Euro 43
DEWALT DE7035 Heavy-Duty Work Support Stand has an ideal size and weight (only 7kg), making it perfect for easy transportation. It is versatile and durable under load, with a 454kg capacity. It is easy to set up, pack away, and store due to its strong compact design. Can be used in different configurations for application versatility, material support and storage and also used with mitre saws and plunge saws.
These 2 Scan Safety signs are made from 1mm thick, durable PVC. Their aggressive water-based adhesive enables the signs to easily stick on to and remain on any wall. They are printed using UV resistant inks, which resist fading. They are easy to read with clear writing and illustration. Complies with BS5499 and/or ISO7010 design criteria where applicable.Helps limit company liability should an accident occur. The SCA1351 safety signs have the following specifications:Individual size: 300 x 100mm eachTotal sheet size: 200 x 300mmMessage: 'Fire Extinguisher'.
This Scan Mandatory Sign is made from 1mm self-adhesive durable PVC and printed using UV resistant inks. Should be applied to clean, flat/smooth surfaces. Complies with BS5499 and/or ISO 7010 design criteria.Helps limit company liability should an accident occur. Size: 200 x 50mm.Message: 'Wear ear protection'.
Scan Foam Latex Coated Gloves are high-visibility orange gloves made of knitted and seamless polyester for excellent comfort. They have black latex wrinkle finish coating on the palm and fingers, which gives excellent grip and flexibility in both wet and dry conditions. The glove has a 13g knitted seamless high visibility polyester liner. Conform to EN420 and EN388 Standards. Abrasion Performance Index (1-4): 2Blade Cut Performance Index (1-5): 1Tear Performance Index (1-4): 2Puncture Performance Index (1-4): 11 x Pair of Scan Hi-Vis Orange Foam Latex Coated Gloves Size 11 Extra Extra Large
The Walsall Pneumatic Barrow Wheel with a durable plastic centre. Suitable for most makes of wheelbarrow. Made in the UK. Specification: Diameter: 350mmBore: 12mm
This Scan Industrial Safety Helmet is manufactured from high density polyethylene to provide excellent head protection. Head protection is essential for site workers for protection from falling objects or striking against fixed obstacles. This helmet features a rain gutter to channel water away from the helmet and face. Easily adjustable to fit head size of between 530 and 630mm. Conforms to EN397:1995 + A1:2000 Helmet Weight: 340g.1 x Scan Safety Helmet Orange
This Scan Safety sign is made from 1mm thick, durable PVC. It's aggressive waster-based adhesive enables the sign to easily stick on to and remain on any wall. It is printed using UV resistant inks, which resist fading. It is easy to read with clear instruction and illustration. Complies with BS5499 design criteria and helps limit company liability, should an accident occur. The SCA0005 safety sign has the following specifications:Size: 200 x 300mmMessage: 'Wear ear protectors'.
A traditional style carpenter's apron manufactured from quality linen. Machine washable. Twin front pockets with tie straps. One size fits all. Ideal for hobby & DIY enthusiast.
This Scan Hazard sign is made from 1mm thick, durable PVC. Its aggressive water-based adhesive enables the sign to easily stick on to and remain on any wall. It is printed using UV resistant inks, which resist fading. It is easy to read with clear writing and illustration. Complies with BS5499 and/or ISO7010 design criteria where applicable.Helps limit company liability should an accident occur. The SCA1105 safety sign has the following specifications:Size: 200 x 300mmMessage: 'Danger Mind the step'.
This Scan Hazard Sign is made from 1mm self-adhesive durable PVC and printed using UV resistant inks. Should be applied to clean, flat/smooth surfaces. Complies with BS5499 and/or ISO 7010 design criteria where applicable.Helps limit company liability should an accident occur. Size: 200 x 50mm.Message: 'Caution Mind the step'.
Kuny's Carpenter's Apron made from heavy-duty suede leather with a 50mm/2in wide heavy-duty nylon web belt with metal twist-lock buckle, metal hammer loops and reinforced at all stress points. With 3 reversed nail pockets for easy access, (2 large and 1 small) and a centre pocket for tape or tools and 2 small pockets for easy access tools. Fit waist sizes: 29in to 40in.
This Scan Safety sign is made from 1mm thick, durable PVC. It's aggressive waster-based adhesive enables the sign to easily stick on to and remain on any wall. It is printed using UV resistant inks, which resist fading. It is easy to read with clear instruction and illustration. Complies with BS5499 design criteria and helps limit company liability, should an accident occur. The SCA0007 safety sign has the following specifications:Size: 200 x 300mmMessage: 'Eye protection must be worn'.
This Scan Mandatory Sign is made from 1mm self-adhesive durable PVC and printed using UV resistant inks. Should be applied to clean, flat/smooth surfaces. Complies with BS5499 and/or ISO 7010 design criteria where applicable.Helps limit company liability should an accident occur. Size: 200 x 50mm.Message: 'Eye protection must be worn'.
This Scan Safety sign is made from 1mm thick, durable PVC. It's aggressive water-based adhesive enables the sign to easily stick on to and remain on any wall. It is printed using UV resistant inks, which resist fading. It is easy to read with clear instruction and illustration. Complies with BS5499 and/or ISO7010 design criteria where applicable.Helps limit company liability should an accident occur. The SCA1540 safety sign has the following specifications:Size: 200 x 300mmMessage: 'Fire exit. Keep clear'.
This Scan safety folding 'A' board sign is made from heavy-duty polypropylene for durability. It has a pre-printed message on both sides and folds flat for easy storage and transportation. It is easy to read with clear writing and an illustration. Message: 'Caution Cleaning in progress' Dimensions: 62cm (height) x 30cm (width).
The Kuny's HM220 Leather Snap in Hammer Holder is made from top grain leather. The cradle design keeps the hammer secure whilst the swing feature keeps hammer vertical. Fits belt sizes up to 70mm (2.3/4in) wide.
This rigidly constructed 5-tray toolbox has the advantage of displaying their contents when open, while being extremely compact when in the closed position. A tubular steel carry handle opens and closes the box as it is lifted and lowered. The lid of the closed box can be secured by a padlock (not supplied) for added security.Size: 40cm (16in)
The Scan Letter Stencil Kit contains the letters A - ZThe Scan Number Stencil Kit contains the numbers 0-9 The stencils are manufactured from durable polyester, which is laser cut for accuracy and definition, meaning that the stencils create neat, legible signs. The stencils can be easily cleaned and re-used. The stencils have letters and/or numbers with identical heights, with varying widths per individual character. The spacer marks in the corners of the stencils allow the user to accurately line up the next character in sequence, ensuring neatness.The SCA9406 Letter & Number Stencil Kit has characters of 100mm (4in) in height.
Scan Mini Sign made from 1mm self-adhesive durable PVC and printed using UV resistant inks. Should be applied to clean, flat/smooth surfaces. Size: 200 x 50mm.Message: 'PLEASE SHUT THE GATE'.
This Scan Safety sign is made from 1mm thick, durable PVC. It's aggressive waster-based adhesive enables the sign to easily stick on to and remain on any wall. It is printed using UV resistant inks, which resist fading. It is easy to read with clear instruction and illustration. Complies with BS5499 design criteria and helps limit company liability, should an accident occur. The SCA0023 safety sign has the following specificationsSize: 200 x 300mmMessage: 'Protect your hands'.
This Scan Mandatory Sign is made from 1mm self adhesive durable PVC and printed using UV resistant inks. Should be applied to clean, flat/smooth surfaces. Complies with BS5499 and/or ISO 7010 design criteria where applicable.Helps limit company liability should an accident occur. Size: 200 x 50mm.Message: 'Use guards'.
This Scan Safety sign is made from 1mm thick, durable PVC. It's aggressive water-based adhesive enables the sign to easily stick on to and remain on any wall. It is printed using UV resistant inks, which resist fading. It is easy to read with clear instruction and illustration. Complies with BS5499 and/or ISO7010 design criteria where applicable.Helps limit company liability should an accident occur. The SCA4052 safety sign has the following specifications:Size: 400 x 600mmMessage: 'Strictly no admittance to unauthorised persons'.
This Scan Safety sign is made from 1mm thick, durable PVC. It's aggressive water-based adhesive enables the sign to easily stick on to and remain on any wall. It is printed using UV resistant inks, which resist fading. It is easy to read with clear instruction and illustration. Complies with BS5499 and/or ISO7010 design criteria where applicable.Helps limit company liability should an accident occur. The SCA0608 safety sign has the following specifications:Size: 200 x 300mmMessage: 'Strictly no admittance'
The DEWALT Force Gilet is suitable to wear as an under or over layer garment. It features a lightweight padding that has a shower resistant nylon outer and a polyester/taffeta inner lining. Comfort stretch side panels and lowered back with centre zip fastening. With 2 hand pockets to lower front and a zipped breast pocket. It also has a reflective DEWALT logo on the chest and rear neck. Available in Sizes Medium - XXXLarge Material Composition: Nylon outer & Polyester/Taffeta innerDEWALT Force Black Lightweight Padded Gilet in Extra Extra Extra Large
The DEWALT Laser Safety Hiker Boots have full grain leather uppers with a breathable, waterproof comfort insole for comfortable all day wear. The padded tongue and collar provide additional comfort. Has a 200 Joule steel toecap, with a steel midsole for underfoot protection. The TPU dual density outsole is anti-static. EN Test: CE EN ISO 20345-2011.Safety Rating: S1P.Slip Rating: SRA.1 x Pair of DEWALT Laser Safety Hiker Black Boots UK 7 Euro 41
The DEWALT Titanium S3 Safety Boots have a waterproof and breathable Samsung membrane inner lining and PU comfort insoles for dry, comfortable all day wear. The padded tongue and collar provide increased comfort. Has a 200 Joule steel toecap, with a steel midsole for underfoot protection. The TPU dual density outsole is anti-static. Available in Wheat with a Full Grain Nubuck Leather Upper or Tan with a Full Grain Tan Leather Upper. Conform to CE EN ISO 20345-2011.Safety Rating: S3-WR.Slip Rating: SRA.These DEWALT Titanium S3 Safety Boots have the following specification: Colour: Wheat.Upper: Full Grain Nubuck Leather.Size: UK 8 Euro 42.
