The Moldex AIR Plus ProValve Real Reusable FFP3 Mask has a washable full face seal and offers a secure fit, that is comparable to a half mask. The AirWave® Pleated Filter reduces breathing resistance, improves wearer comfort and minimises fatigue. Offers low breathing resistance even after hours of use. The built-in ProValve reduces condensation from exhaled air. Masks are individually packaged. FFP storage bag available (MOL399401), helps keep the mask hygienic. FFP3 for protection against toxic dusts, mists and fumes 20 x WEL (Workplace Exposure Limit). Tested and certified to EN 149:2001+A1:2009.
The DEWALT Force Gilet is suitable to wear as an under or over layer garment. It features a lightweight padding that has a shower resistant nylon outer and a polyester/taffeta inner lining. Comfort stretch side panels and lowered back with centre zip fastening. With 2 hand pockets to lower front and a zipped breast pocket. It also has a reflective DEWALT logo on the chest and rear neck. Available in Sizes Medium - XXXLarge Material Composition: Nylon outer & Polyester/Taffeta innerDEWALT Force Black Lightweight Padded Gilet in Medium
The Apache Rip-Stop Holster Shorts offer a functional option on warmer days. They are made from a lightweight Rip-Stop polycotton with Cordura holster pockets and a low rise comfort fit waist. Other features include: two rear hook & loop pockets, a side cargo pocket (left leg), large phone pocket (right leg), tunnel belt loop and YKK zip. They are available in waist sizes 30 to 42 inch. Material Weight: 255g.Material Composition: 65% Polyester, 35% Cotton.1 x Pair of Apache Grey Rip-Stop Holster Shorts Waist 38in
The DEWALT Darlington Trainers have a lightweight synthetic upper with a padded collar and tongue for all-day wearer comfort. The product has a removable comfort footbed and the outsole is made from EVA and rubber, as used in sports technology footwear. They are fitted with a steel toecap that has been tested to 200 joules and an anti-scuff toecap for protection when kneeling and working. EN Test: CE EN ISO 20345-2011Safety Rating: SBSlip Rating: SRA1 x Pair of DEWALT Darlington Safety Trainers UK 9 Euro 43
These Scan Breathable Microfoam Nitrile Gloves are manufactured from a knitted grey spandex liner with a microfoam nitrile palm coating. Suitable for use in many processes involving the handling of small metal or plastic parts, or any situation where high dexterity is required. Extremely light and breathable, the special microfoam coating offers a secure grip in both wet and dry applications, with no sticky side effect and is oil and grease resistant. Conform to EN 420 and EN 388 Standards. Abrasion Performance Index (1-4): 4Blade Cut Performance Index (1-5): 1Tear Performance Index (1-4): 3Puncture Performance Index (1-4): 11 x Pair of Scan Breathable Microfoam Nitrile Gloves Size 9 Large
The Stanley FatMax® Mobile Chest has a lock mechanism in the lid to hold a level and a saw. Tools can also be stored vertically within the chest. An all-round water seal keeps valuable contents safe. Heavy-duty wheels give mobility on rough surfaces. The portable tray is ideal for hand tools and small parts, and the lid has an integrated lock and keys to keep tools protected. It also has an integrated V-groove for any on-site sawing needs and the telescopic handle slides in for compactness when not in use. A back end handle enables convenient lifting into a vehicle for two people. Please Note - Tools NOT included Specification Dimensions: 910 x 516 x 431mm.
The DEWALT Titanium S3 Safety Boots have a waterproof and breathable Samsung membrane inner lining and PU comfort insoles for dry, comfortable all day wear. The padded tongue and collar provide increased comfort. Has a 200 Joule steel toecap, with a steel midsole for underfoot protection. The TPU dual density outsole is anti-static. Available in Wheat with a Full Grain Nubuck Leather Upper or Tan with a Full Grain Tan Leather Upper. Conform to CE EN ISO 20345-2011.Safety Rating: S3-WR.Slip Rating: SRA.These DEWALT Titanium S3 Safety Boots have the following specification: Colour: Tan.Upper: Full Grain Leather.Size: UK 7 Euro 41.
The DEWALT Challenger Sympatex Waterproof Hiker Boots have a full grain nubuck leather upper with a Sympatex waterproof and breathable membrane. The TPU sole is resistant to petrol, chemicals, oil and temperatures up to 120°C. The sole is anti-static for increased user protection. The boots have a lightweight and flexible design with shock absorption and a steel toecap that offers protection of up to 200 joules. There is also a steel midsole for underfoot protection and a dual density anti-bacterial insole. Available in Black or Brown. EN Test: CE EN ISO 20345-2011.Safety Rating: S3-WR.Slip Rating: SRA.The DEWALT Challenger Sympatex Boots have the following specification: Colour: Black.Size: UK 9 Euro 43.
The DEWALT Apprentice Hiker Boots have nubuck and full grain leather uppers which are hard-wearing with antibacterial insole with dual density seat. They are fitted with a steel toecap that has been tested to 200 joules. The sole is chemical and oil resistant and is made from EVA rubber. Available in Wheat or Brown. EN Test: CE EN ISO 20345-2011.Safety Rating: SB.Slip Rating: SRA.The DEWALT Apprentice Nubuck Hiker Boots have the following specification: Colour: Wheat.Size: UK 12 Euro 46.
The Scan Fall Arrest Lanyard is a 1.95 metre Hook & Connect Lanyard. These are the connection between your harness and an anchor point. Made from 1.95m shock absorbing elasticated webbing, it has a 70mm gate opening lightweight scaffold hook, and an 18mm steel locking snap hook. Conforms to EN 355/354/362.
The Scan Fall Arrest Pro Harness 5 Point is commonly used within the construction industry, by scaffolding and steel erectors plus any at height workman. It is made from 100% polyester and features: a dorsal attachment D-ring, 2 attachment webbing loops on the chest and thigh strap and 2 side D-rings on waist support belt, shoulder strap and thigh strap. It has a flexible, lightweight design that offers very little restriction to movement. Fitted with additional comfort features: a comfort pad within the waist support belt and an adjustable chest, waist and thigh strap. Supplied with a thick micron poly bag. Strength >23kN, manufactured and tested to EN 361.
The Scan Fall arrest harness is a commonly used full body harness and comes with metal D-Ring attachment and leg straps. It is suitable for most work at height applications in the construction industry (scaffolders, steel erectors etc) and has fully adjustable leg, shoulder & chest straps. The rear dorsal plate slides upwards to keep the user upright after a fall and it has a robust metal front attachment point with polyester webbing and front and rear attachment. Conforms to EN 361 and comes in a storage bag. Over 7,000 falls from height in the workplace were reported to the UK health and Safety Executive during 2006-07, 24 of these were fatal. Falls from height are the most common cause of fatal injury and the second most common cause of major injuries, accounting for around 15% of all such injuries in the workplace.
The DEWALT Reinforcer™ Safety Glasses feature ToughCoat™ hard coated lenses, that provides tough protection against scratches. The distortion free lenses reduce eye fatigue and are made from polycarbonate, to protect against impact resistance. The rubber-tipped temples provides a secure, comfortable fit whilst the soft, rubber nosepiece offers maximum all-day comfort. Conform to EN1661F standards. Offer 99.9% UVA/UVB Protection.These DEWALT Reinforcer™ Safety Glasses have Fire Mirror lenses.
This Scan Industrial Safety Helmet is manufactured from high density polyethylene to provide excellent head protection. Head protection is essential for site workers for protection from falling objects or striking against fixed obstacles. This helmet features a rain gutter to channel water away from the helmet and face. Easily adjustable to fit head size of between 530 and 630mm. Conforms to EN397:1995 + A1:2000 Helmet Weight: 340g.1 x Scan Safety Helmet Yellow
Bollé Safety SILIUM Safety Glasses combine a subtle, lightweight frame with the high-tech nature of metal. The arms are highly flexible and have non-slip TIPGRIP temples. In addition, the glasses have adjustable non-slip nose pads. The lenses have anti-scratch, anti-fog and anti-static coatings.These Bollé Safety SILIUM Safety Glasses have smoke colour lenses. They are approved for permanent wear and certified with perfect optical quality. Designed and used for protection against UVA/UVB and solar radiation, 99.9% UVA/UVB protection. Specification Lens Type: Smoke, Anti-Fog, Anti-Scratch and Anti-Static.Lens Conforms to: EN1661F/EN172-Solar 5-2.5.Frame Conforms to: EN166F.
This Scan Safety sign is made from 1mm thick, durable PVC. It's aggressive waster-based adhesive enables the sign to easily stick on to and remain on any wall. It is printed using UV resistant inks, which resist fading. It is easy to read with clear instruction and illustration. Complies with BS5499 design criteria and helps limit company liability, should an accident occur. The SCA4001 safety sign has the following specifications:Size: 400 x 600mmMessage: 'Safety helmets and protective footwear must be worn in this area'.
Vitrex Cut Resistant Gloves provide a high level of cut protection whilst giving the wearer maximum dexterity. They are made from a combination of high strength and lightweight core filaments for dependable, long-lasting cut protection. Suitable for sharp-edged steel and glass handling, building and construction areas, mechanical assembly lines etc.
These Scan Black PU Coated Gloves are made from knitted nylon with a seamless finish and a fine polyurethane coating over the palm and fingers. The back of the glove is uncoated to provide ventilation to the hand, avoiding perspiration and clamminess. These gloves are suited to work where a high level of dexterity is needed along with a good protection factor. Typical applications include packing, inspection and fine component assembly operations. Conform to EN420 and EN388 Standards. Abrasion Performance Index (1-4): 4Blade Cut Performance Index (1-5): 1Tear Performance Index (1-4): 3Puncture Performance Index (1-4): 112 x Pairs of Scan Black PU Coated Gloves Size 8 Medium
The DEWALT TSTAK™ Trolley is a foldable telescopic aluminium trolley with a 100kg/220lb load capacity for durability. The front castors and back wheels allow for good manoeuvrability. Side latches allow it to be connected to TSTAK™ toolboxes/organisers for easy transportation and safe stacking. Specification Dimensions WxHxD: 490 x 700 x 285mmMax. Load: 100kg
Moldex Bitrex Fit Testing Kit. The Approved Code of Practices supporting COSHH, CAR and CLAW stipulate that tight-fitting RPE (respiratory protective equipment) MUST be fit tested as part of the selection process. This is to ensure that the selected RPE has the potential to provide adequate protection for the wearer. There are two main reasons for doing Bitrex testing. Firstly to make sure that the respirator itself is suited for the wearer's particular face shape. Secondly to make sure that the respirator is fitted correctly to get a tight seal and ensure safety against hazards in the workplace. It is important to remember it is the suitability of the respirator that is being tested. The Moldex MOL10301 Bitrex Fit Testing Kit contains: 2 x Nebulisers.1 x Test Hood.6 x 2.5ml Ampoules Bitrex Sensitivity Solution.6 x 2.5ml Ampoules Bitrex Test Solution.2 x Spare Parts For Nebulisers.1 x Moldex Qualitative Fit Test CD.
This Scan Mandatory Sign is made from 1mm self-adhesive durable PVC and printed using UV resistant inks. Should be applied to clean, flat/smooth surfaces. Complies with BS5499 and/or ISO 7010 design criteria.Helps limit company liability should an accident occur. Size: 200 x 50mm.Message: 'Wear ear protection'.
This Scan Safety sign is made from 1mm thick, durable PVC. It's aggressive waster-based adhesive enables the sign to easily stick on to and remain on any wall. It is printed using UV resistant inks, which resist fading. It is easy to read with clear instruction and illustration. Complies with BS5499 design criteria and helps limit company liability, should an accident occur. The SCA0023 safety sign has the following specificationsSize: 200 x 300mmMessage: 'Protect your hands'.
Bahco Production Gloves are made from comfortable, thin PU material which gives better touch and feel. They feeature a pressure absorbing pad on the thumb and have hook and loop fastening for a secure fit.Bahco Production Soft Grip Glove Medium (Size 8)
