All in one, easy-to-use mitre box. 90° , 45° and 22.5° slots. 300mm length with a patented storage system for the saw.Comes complete with Tenon Saw. Length: 350mm
This 60 1/2 Block Plane features a low angle cutter seat at 13.5° and is fully adjustable for depth-of-cut, cutter alignment and size of mouth. The body is made from a fine grey iron.Particularly effective on end grain and plastic laminates.Supplied with a pouch for convenient storage. Cutter Width: 35mm.Length: 150mm (6in).
The Stanley Surform® Round File is useful for wood turning and wood sculpture. Also for enlarging holes in wood and smooth concave surfaces. There is a thumb grip at one end and a polypropylene handle at the other to provide more control when in use. It is supplied with a 250mm (10in) blade. Overall Length: 400mm (16in).
The Stanley DYNAGRIP™ Wood Chisel is fitted with a steel striking cap handle which can be used with a steel hammer. With a longer, soft grip handle for improved grip and control, forged high carbon steel blades for reassurance of strength and durability. The pre-sharpened blade is ready for immediate use.1 x Stanley DynaGrip™ Bevel Edge Chisel With Strike Cap 20mm (3/4in)
The IRWIN Marples M444 Series Blue Chip Bevel Edge chisels have high impact round blue plastic handles, contoured for maximum control, radiused for a comfortable grip and have been designed for use with a mallet and will absorb the occasional hammer blow. The solid one-piece forged bolster fitted bevel edged blades are manufactured from the best in category carbon steel, tempered along the full length of the blade and hardened up to the last 25mm for a longer working life and annealed for an edge that is slow to blunt yet easy to sharpen.1 X Marples M444 Series Blue Chip Bevel Edge Chisel 13mm (1/2in).
Bahco 434 Series Bevel Edge Chisel developed according to the scientific ERGO™ process. Has a two component grip, splitproof handle allows repeated hammer blows and the blades are manufactured from hardened and tempered steel, which are precision ground for maximum sharpness and long lasting performance. With the exception of the 50mm wide blade, the remaining chisels in the 434 range are supplied with A safety guard and have rounded shoulders for added safety.Size: 10mm.
Replacement irons (blades) are available for all Stanley block and specialist planes. All Stanley replacement plane irons are made from chrome carbon steel which has excellent edge retention characteristics and allows a razor sharp edge to be honed. All cutters are fine rotary ground to give a flat surface that is easier to sharpen. G : Denotes suitable for old style planes.To fit 112060 Plane 60. 1/2G.(old style) Size of Cutter 1.3/8in
The Stanley FatMax® Thru tang bevel edge chisels have an ergonomic handle design incorporating a shatterproof polymer handle. The ergonomic soft grip longer handle is useful for maximum control, feels good in the hand and is comfortable in all applications. The friction welded bolster also gives strength and durability. The steel striking cap can be struck with a steel hammer for increased cutting force and the body resists most solvents. The ISO Standard Blade is made from high quality ball bearing grade steel EN31 and is fully ground and finished for ultimate sharpness and the full length blade guard provides added safety. This FatMax chisel range has a superior design - 50% stronger handle (than the old Dyna Grip Pro Chisel on side impact test) for extra reassurance and durability. The quality chrome alloy (ball bearing grade) steel provides superior edge retentionThe Stanley STA 0-16-265 FatMax® Thru Tang Chisel is 38mm (1 1/2 inches) in width and 165mm in length
IRWIN Record A151R is for concave surfaces useful shaping tool for curved surfaces.The malleable iron handles are virtually unbreakable and designed for a lifetimes use. Fully adjustable cutter made from top quality tool steel to create and retain a keen cutting edge. Specification Type: Round.Cutter Width: 60mm (2.3/8in).Length: 250mm (10in).
The Jointer plane performs a dual role between stock removal and accurately truing up long edges or levelling wide boards. It is fully adjustable and has a machined frog and cutter seating to reduce chatter. Length: 560 mm (22in).Cutter width: 60 mm (2.3/8in).
Bahco 434 Series Bevel Edge Chisel developed according to the scientific ERGO™ process. Has a two component grip, splitproof handle allows repeated hammer blows and the blades are manufactured from hardened and tempered steel, which are precision ground for maximum sharpness and long lasting performance. With the exception of the 50mm wide blade, the remaining chisels in the 434 range are supplied with A safety guard and have rounded shoulders for added safety.The Bahco 434-S8 8 Piece Bevel Edged Chisel Set contains chisels that have been developed according to the scientific ERGO™ process. They have split-proof 2-component handles and precision ground blades for maximum sharpness. The blades are also hardened and tempered for long lasting performance and come honed and ready to use. Presented in a varnished wooden box. Sizes: 6, 10, 12, 16, 18, 25, 32 and 38mm.
Made from high quality swedish chrome nickel steel, cold rolled, hardened and tempered with specially ground cutting edges. Each scraper comes complete with a plastic edge protector. Ideal for smoothing hardwoods, removing paint and varnish etc.Flat profile.Gauge: 0.8 mm /21g.
A No.5 size Handyman Jack plane for rapid stock removal prior to commencing assembly work. Fully adjustable for cutter alignment and depth of cut.Fine grey iron base with handle and knob in high impact polystyrene and chrome carbon steel cutters. Length: 355mm (14in).Cutter width: 50mm (2in).
The Stanley DYNAGRIP™ Wood Chisel is fitted with a steel striking cap handle which can be used with a steel hammer. With a longer, soft grip handle for improved grip and control, forged high carbon steel blades for reassurance of strength and durability. The pre-sharpened blade is ready for immediate use.1 x Stanley DynaGrip™ Bevel Edge Chisel With Strike Cap 8mm (5/16in)
This professional general purpose adjustable Block Plane has a fine grey iron body and is adjustable for depth of cut and alignment. A block plane is designed to cut end grain and is typically small enough to be used with one hand with the cutting blade (also known as an iron) bedded at a lower angle with the bevel up compared against other planes. It is frequently used for paring end grain, possible because its blade had been set at a shallow bed angle. This allows the blade to slice through end grain more efficiently; furthermore, for this to work, the plane is frequently held at an angle sometimes as much as 45° to the direction of travel, so that the cutting edge slices the wood fibers as they pass from one end of the cutting edge to the other. A block plane has many other uses in woodworking, ideal for cleaning up components by removing thin shavings of wood in to make a component fit within fine tolerances. Chamfering (angling square edges) and removing glue lines are some of the other uses woodworkers find for the block plane. Cutter Width: 40mm (1.5/8in).Length: 180mm (7in).
Stanley professional smoothing planes are designed for final finishing of cabinet and general joinery work. They are made from accurately machined fine grey iron castings and have a simple and rapid adjustment mechanism, with easy blade removal for sharpening and finger tip adjustment for depth of cut and cutter alignment. A black epoxy finish with plated parts and chrome carbon cutter enhance the attributes of these models.Length: 9.3/4in Cutter width: 2 inch
The Stanley Surform® Plane is for use on all types of wood, aluminium, copper, plastic and laminates. It has a polypropylene handle and die-cast body for strength and durability and is fitted with a standard cut 250mm (10in) blade. Overall Length: 315mm (12in).
Fine grey iron base accurately machined for stability and precision in use.A light-duty, easily and simply adjusted smoothing plane with a chrome carbon cutter with simple lateral and depth adjustment.Virtually unbreakable high impact injection moulded handles for comfort and long life.Length 9.3/4in.Cutter width 2in.
These Roughneck Professional Bevel Edge Chisels have high quality, drop forged Chrome Vanadium blades for long life performance. The bevel edge blade has two cutting angles - 25° ground angle and a pre-honed 30° angle for immediate cutting. The chisels have contoured, comfortable handles for maximum control. These handles are made from impact-resistant polypropylene with a heavy-duty end cap for repeated striking. The blade tang runs through the handle for direct transfer of striking force to the cutting edge. The chisels are supplied with a blade guard for edge protection and user safety.Size: 50mm (2 inch).
The Stanley DYNAGRIP™ Wood Chisel is fitted with a steel striking cap handle which can be used with a steel hammer. With a longer, soft grip handle for improved grip and control, forged high carbon steel blades for reassurance of strength and durability. The pre-sharpened blade is ready for immediate use.1 x Stanley DynaGrip™ Bevel Edge Chisel With Strike Cap 10mm (3/8in)
The Pony Jorgensen 3 Piece Coarse Rasp Chisel Set. Each chisel features a sharp and grounded blade. Manufactured from high quality alloy steel for superior cutting and scraping. The impact resistant, ergonomic handle is designed for comfort and precision. Fitted with a metal end cap for striking. Designed to handle any woodworking project for professionals and DIYers alike.
Bahco SB-2448 Chisel Wrecking Knife is a heavy-duty wrecking knife and a 25mm chisel in one. Has a curved knuckle protector, that also works as a lever. Back edge of the blade and handle can be struck with a hammer to make working faster. Ideal for rough woodwork, making mortice joints in doors, splitting wood, in building and construction, carpentry etc. Holster with button clip. Blade type: Straight.Blade length: 100mm.
The IRWIN Marples M373 splitproof bevel edge wood chisels are ideal for heavy-duty use and have split proof handles. They are made from best in category steel for improved sharpness and edge retention. The Blade, bolster and tang are forged from one-piece of steel with edges bevelled to enable easier working in tight corners and they are fitted with two-tone splitproof plastic handles which will withstand heavy usage. The handle is also contoured to provide added control.1 X M373 Splitproof Bevel Edge Wood Chisel 16mm (5/8in).
