The Bailey Jack plane is designed for rapid stock removal when preparing timber prior to finishing. Machined frog and cutter seatings to eliminate blade chatter. Unbreakable plastic handles and special cap iron design which curves shavings and prevents clogging. Length: 355 mm (14in).Cutter width: 50 mm (2in).
These Roughneck Professional Bevel Edge Chisels have high quality, drop forged Chrome Vanadium blades for long life performance. The bevel edge blade has two cutting angles - 25° ground angle and a pre-honed 30° angle for immediate cutting. The chisels have contoured, comfortable handles for maximum control. These handles are made from impact-resistant polypropylene with a heavy-duty end cap for repeated striking. The blade tang runs through the handle for direct transfer of striking force to the cutting edge. The chisels are supplied with a blade guard for edge protection and user safety.This set of 3 chisels contains the following sizes: 13mm (1/2in), 19mm (3/4in), and 25mm (1in).
The Estwing Pro-Claw Nail Puller is made with fine tool steel, drop forged and tempered for extra durability. Both nail puller claws are precise and sharp to remove embedded or headless nails with ease and minimal wood damage. The head is slightly rounded to give you improved leverage and the precision thin claw design enables you to get into hard to reach places. Fitted with a comfortable, durable vinyl grip for a strong hold in all conditions. 1 x Estwing Pro-Claw Nail Puller 300mm (12in).
Quality all steel construction nail puller with heat treated alloy steel jaws, which incorporate a full box joint. Overall length 480 mm (19in). This nail puller incorporates an integral rammer and is suitable for removing almost every type of nail, even when the head is sunk flush into the wood.
BlueSpot Tools 4 Piece Wood Chisel Set is manufactured from drop-forged and heat-treated steel for increased durability. Precision machined bevelled edges for accurate striking. Ergonomic plastic handles for increased comfort. Sizes: 1/4in (6mm), 1/2in (12mm), 3/4in (19mm) and 1in (25mm)
Versatile, easy-to-use nail puller. Despite its small size, it can easily pull out a 5 in nail, even when the head of the nail is off or buried deep in the wood. Made of red lacquered hardened steel.
These Faithfull Centre Points are used for accurate alignment of dowel holes. To use: Place the blunt end in a hole already made for dowel in one piece of wood, place the second piece of wood in required position and press down to leave centre of second hole accurately marked.The Faithfull FAIDOWCENT8 contains: 4 x 8 mm dowel points.
The Stanley 151 is a professional spokeshave which is fully adjustable for depth of cut with twin thumbscrews. Machined from fine grey iron with a flat bottom. Precision machined bases are suitable for work on any convex surface. Type: Flat.Cutter Width: 55mm (2.1/8in).Length: 250mm (10in).
The IRWIN Marples M373 splitproof bevel edge wood chisels are ideal for heavy-duty use and have split proof handles. They are made from best in category steel for improved sharpness and edge retention. The Blade, bolster and tang are forged from one-piece of steel with edges bevelled to enable easier working in tight corners and they are fitted with two-tone splitproof plastic handles which will withstand heavy usage. The handle is also contoured to provide added control.1 X M373 Splitproof Bevel Edge Wood Chisel 6mm (1/4in).
The Faithfull bevel edged chisel range are quality tools for professional work as well as DIY users. The blue PVC handles on these chisels are impact resistant and designed for use with a mallet, or an occasional hammer blow. Each blade is manufactured from drop-forged chrome vanadium steel and is hardened and tempered to exacting standards, ensuring that the cutting edge remains sharper for longer. The bevelled edges make these chisels ideal for fine work and for cutting into tight corners. All the chisels in this range are supplied with blade guards.The Faithfull FAIWCBS3BC set of three blister carded bevel edge chisels have the following dimensions: Sizes: 13, 19, and 25mm (1/2, 3/4 and 1 inch) Blade Length: 140mm
This single pinion hand drill has an aluminium gear wheel.It has a 3-jaw self centring chuck 5/16in (8mm), a black japanned finish,and is fitted with comfortable plastic handles.
The Stanley FatMax® Thru tang bevel edge chisels have an ergonomic handle design incorporating a shatterproof polymer handle. The ergonomic soft grip longer handle is useful for maximum control, feels good in the hand and is comfortable in all applications. The friction welded bolster also gives strength and durability. The steel striking cap can be struck with a steel hammer for increased cutting force and the body resists most solvents. The ISO Standard Blade is made from high quality ball bearing grade steel EN31 and is fully ground and finished for ultimate sharpness and the full length blade guard provides added safety. This FatMax chisel range has a superior design - 50% stronger handle (than the old Dyna Grip Pro Chisel on side impact test) for extra reassurance and durability. The quality chrome alloy (ball bearing grade) steel provides superior edge retentionThe Stanley STA 0-16-253 FatMax® Thru Tang Chisel is 10mm (3/8 inch) in width and 125mm in length
The IRWIN Marples M373 splitproof bevel edge wood chisels are ideal for heavy-duty use and have split proof handles. They are made from best in category steel for improved sharpness and edge retention. The Blade, bolster and tang are forged from one-piece of steel with edges bevelled to enable easier working in tight corners and they are fitted with two-tone splitproof plastic handles which will withstand heavy usage. The handle is also contoured to provide added control.1 X M373 Splitproof Bevel Edge Wood Chisel 18mm (3/4in).
1 x IRWIN® Marples® M750 Splitproof Pro Bevel Edge Chisel 50mm (2in). The IRWIN® Marples® M750 Splitproof Pro Bevel Edge Chisels have a carbon-rich blade that is solid forged, hardened and tempered up to the last inch for a long working life. They have guaranteed splitproof handles that help to absorb harmful vibrations. The chisels have a highly durable friction grip, sturdy neck and bolster, and are honed and sharpened.
The IRWIN Marples M444 Series Blue Chip Bevel Edge chisels have high impact round blue plastic handles, contoured for maximum control, radiused for a comfortable grip and have been designed for use with a mallet and will absorb the occasional hammer blow. The solid one-piece forged bolster fitted bevel edged blades are manufactured from the best in category carbon steel, tempered along the full length of the blade and hardened up to the last 25mm for a longer working life and annealed for an edge that is slow to blunt yet easy to sharpen.1 X Marples M444 Series Blue Chip Bevel Edge Chisel 10mm (3/8in).
Designed for Tradesmen, this bevel edged wood chisel has a ground finished, hardened and tempered alloy steel blade, with a one piece, solid impact resistant blue polypropylene plastic handle.The blade is lacquered for rust prevention. The 0-16-130 chisel set contains:4 x 5002 Wood chisels 6mm (1/4 in), 12mm (1/2 in), 18mm (3/4 in) and 25mm (1 in).1 x Carry Case.1 x Oil.1 x Sharpening stone.
The Faithfull No.3 Finishing Plane is ideal for final finishing of cabinet work and general joinery, precision machined for accurate adjustment. Suitable for both hard and soft woods. Made with a quality grey cast iron body for strength and stability with precision ground base and sides for flatness and squareness. Machined seatings eliminate movement and blade judder. A lever cap with a brass locking screw secures the blade assembly and enables easy release for sharpening. Wooden handles and guidance knobs maximise user comfort. A solid brass blade adjustment nut completes the appeal of these traditional tools. Cutter width: 45mm.Overall length: 230mm.
The Hultafors OGC r8 Outcannel Carving Gouge is a curved chisel, sharpened on the outside, giving a perfect 8mm radius in one stroke. Sharp, reliable and always at hand, perfect for making cable ditches. The gouge features a high-quality Japanese steel blade with a heavy-duty handle designed to withstand repeated hammer blows. Supplied in a smart holster for easy access at all times. Specifications: Radius: 8mm.Overall Length: 232mm.
The Hultafors HDC Heavy-Duty Chisel has a perfect ground blade, bevelled at 25° for the best ratio possible between sharpness and durability. It is forged in one piece with an I-beam going all through for extreme durability and to maximise the force transmission down to the workpiece. The entire chisel including the handle can be positioned flat against the surface for an increased number of applications. The chisel is fitted with a santoprene handle, optimised for both power and precision. Chisels with perfect precision, sharp, heavy duty, and always close at hand. They are ready for tasks requiring extreme strength and precision. They come with a smart holster made from durable PP plastic for increased accessibility, the holster can easily be attached to a belt or on a button. Replaceable nylon striker available as spare part.Hultafors HDC20 Heavy-Duty Chisel 20mm
