The Faithfull 'Jack' planes have a long base and are used for the initial preparation of rough timber. Made with a quality grey cast iron body for strength and stability with precision ground base and sides for flatness and squareness. Machined seatings eliminate movement and blade judder. A lever cap with a brass locking screw secures the blade assembly and enables easy release for sharpening. Wooden handles and guidance knobs maximise user comfort. A solid brass blade adjustment nut completes the appeal of these traditional tools.Presented in a fine hinged wooden storage case. Cutter width: 50mm (2in) Overall length: 355mm (14in)
Faithfull Turning chisels for use on woodturning lathes. Manufactured from High Speed Steel, these chisels will perform well in both hard and soft woods. They maintain a sharp cutting edge much longer than their carbon steel equivalents, requiring less time being re-sharpened They are fitted with full sized contoured walnut handles for user comfort and brass ferrules. Overall length: 410 mm.Length of blade: 160 mm. Roughing Out Gouge for removing large amounts of timber quickly. Can also be used to plane the surface of spindle blanks and shaped gentle curves.Size: 16 mm Roughing Out Gouge.
The Faithfull Shoulder Bullnose Rebate Plane is a versatile, 3-in-1 low angle plane, combining the functions of: a shoulder plane with the front extension fitted; a bullnose plane using the small nose section; or a chisel plane with the nose removed. The full width blade also allows use as a rebate plane and is easy to set using the knurled adjustment screw.Presented in a hinged wooden storage box.
The IRWIN Marples MS500 Series All-Purpose Chisels with ProTouch™ Handle. These chisels have a large metal striking cap to withstand hammer impacts, prolong the life of the handle and prevent mushrooming. ProTouch™ handles are designed to provide an extra comfort grip and also reduce vibrations and hand fatigue. One-piece blade forging gives added strength and durability. Made from special tool steel which ensures a much sharper cutting edge for quicker and easier operation. A special hardening process gives the blade a longer lasting edge - less time spent re-sharpening. The blade is hardened to the last inch, giving more working chisel for your money. Every chisel is honed and sharpened ready for use out of the packet - to save you time and effort. Option to purchase a single chisel or in the following sets: MARS500S3: Set of 3: 12, 19 & 25mmMARS500S3SS: Set of 3: 12, 19 & 25mm plus Sharpening SetMARS500S5W: Set of 5: 6, 10, 12, 19, & 25mmMARS500S6: Set of 6: 6, 10, 12, 19, 25, & 32mmMAR10507958: Set of 6 + 2 Free: 6, 10, 12, 19, 25, 32, 38 & 50mm1 x Marples MS500 Series All-Purpose Chisel with ProTouch™ Handle 16mm (5/8in)
The Faithfull Block Plane has the plane iron set at 13.5°. It is particularly effective on end grain and plastic laminates. Block planes are designed for end grain work or in any situation where a single handed operation is required. The low angle cutter and fully adjustable mouth, from wide for coarse work to narrow for the fine shaving of awkward grain. Cutter Width: 35mm.Overall Length: 160mm.This Faithfull No.60.1/2 Block Plane is supplied loose, unboxed.
The Faithfull No.7 Jointer plane is designed for stock removal and truing long edges or levelling wide boards. The plane features a precision ground base and sides with a traditional hardwood handle and knob for comfort and high quality brass fittings precision machined for accurate adjustment. The plane is suitable for use on both hard and soft woods. Cutter Width: 60mm (2.3/8in).Overall Length: 560mm (22in).
These Faithfull fluted dowel pegs are made from air dried beechwood. They are used for making secure joints between pieces of wood or board.The Faithfull FAIDOW672P fluted wood dowels have the following specifications: Pack quantity: 72. Size: 30 x 6mm.
The IRWIN Marples MS500 Series All-Purpose Chisels with ProTouch™ Handle. These chisels have a large metal striking cap to withstand hammer impacts, prolong the life of the handle and prevent mushrooming. ProTouch™ handles are designed to provide an extra comfort grip and also reduce vibrations and hand fatigue. One-piece blade forging gives added strength and durability. Made from special tool steel which ensures a much sharper cutting edge for quicker and easier operation. A special hardening process gives the blade a longer lasting edge - less time spent re-sharpening. The blade is hardened to the last inch, giving more working chisel for your money. Every chisel is honed and sharpened ready for use out of the packet - to save you time and effort. Option to purchase a single chisel or in the following sets: MARS500S3: Set of 3: 12, 19 & 25mmMARS500S3SS: Set of 3: 12, 19 & 25mm plus Sharpening SetMARS500S5W: Set of 5: 6, 10, 12, 19, & 25mmMARS500S6: Set of 6: 6, 10, 12, 19, 25, & 32mmMAR10507958: Set of 6 + 2 Free: 6, 10, 12, 19, 25, 32, 38 & 50mm1 x Marples MS500 Series All-Purpose Chisel with ProTouch™ Handle 13mm (1/2in)
The IRWIN Marples MS500 Series All-Purpose Chisels with ProTouch™ Handle. These chisels have a large metal striking cap to withstand hammer impacts, prolong the life of the handle and prevent mushrooming. ProTouch™ handles are designed to provide an extra comfort grip and also reduce vibrations and hand fatigue. One-piece blade forging gives added strength and durability. Made from special tool steel which ensures a much sharper cutting edge for quicker and easier operation. A special hardening process gives the blade a longer lasting edge - less time spent re-sharpening. The blade is hardened to the last inch, giving more working chisel for your money. Every chisel is honed and sharpened ready for use out of the packet - to save you time and effort. Option to purchase a single chisel or in the following sets: MARS500S3: Set of 3: 12, 19 & 25mmMARS500S3SS: Set of 3: 12, 19 & 25mm plus Sharpening SetMARS500S5W: Set of 5: 6, 10, 12, 19, & 25mmMARS500S6: Set of 6: 6, 10, 12, 19, 25, & 32mmMAR10507958: Set of 6 + 2 Free: 6, 10, 12, 19, 25, 32, 38 & 50mmThe MAR10507958 Marples MS500 Series All-Purpose Chisels with ProTouch™ Handle Set of 6 is supplied in a wooden box comprising 1 of each of the following sizes: 6mm (1/4in), 10mm (3/8in), 12mm (1/2in), 19mm (3/4in), 25mm (1in) and 32mm (1.1/4in). PLUS 2 free chisels included: 38mm (1.1/2in) and 50mm (2in).
The Faithfull No.4 Smoothing Plane is designed for smoothing and final finishing. Made with a quality grey cast iron body for strength and stability with precision ground base and sides for flatness and squareness. Machined seatings eliminate movement and blade judder. A lever cap with a brass locking screw secures the blade assembly and enables easy release for sharpening. Wooden handles and guidance knobs maximise user comfort. A solid brass blade adjustment nut completes the appeal of these traditional tools. Cutter Width: 50mm.Overall Length: 250mm.This Faithfull No.4 Smoothing Plane is presented in a hinged, wooden storage box.
The Faithfull Block Plane has the plane iron set at 13.5°. It is particularly effective on end grain and plastic laminates. Block planes are designed for end grain work or in any situation where a single handed operation is required. The low angle cutter and fully adjustable mouth, from wide for coarse work to narrow for the fine shaving of awkward grain. Cutter Width: 35mm.Overall Length: 160mm.The Faithfull 60.1/2 Block plane with the plane iron set at 13.5°. It is particularly effective on end grain and plastic laminates. Block planes are designed for end grain work or in any situation where a single handed operation is required. The low angle cutter and fully adjustable mouth, from wide for coarse work to narrow for the fine shaving of awkward grain, make these planes ideal for all types of end grain work. Presented in a hinged wooden box. Overall Length: 160mm.Cutter Width: 35mm.
The Faithfull No.6 Fore plane performs a dual role between stock removal and truing up long edges or levelling wide boards. Made with a quality grey cast iron body for strength and stability with precision ground base and sides for flatness and squareness. Machined seatings eliminate movement and blade judder. A lever cap with a brass locking screw secures the blade assembly and enables easy release for sharpening. Wooden handles and guidance knobs maximise user comfort. A solid brass blade adjustment nut completes the appeal of these traditional tools. Cutter width: 60mm (2.3/8in).Overall length: 457mm (18in).
The Faithfull Mitre Box is made from high quality European beech, the sides and bases are glued and screwed together to provide extra strength and durability.With accurate slots for cutting 45° or 90° angles, they are designed for use with tenon or backsaws.Ideal for use when cutting picture frame joints and general carpentry work.Box Length: 305mm (12in) Box Width: 115mm (4.1/2in) Capacity
The Faithfull 778 plane is designed to cut rebates up to 38mm (11/2in) and is guided by an adjustable fence supported on two guide rods. The rods can be pushed through which allows the fence to be used on either side of the plane. A twin position cutter enhances the versatility of this plane. The plane features a quality cast iron body with accurately ground base, two position cutter for rebate and bull nose work, a double sided adjustable fence, a spur for cross grain cutting and is supplied with an accurate depth stop. With the cutter in the centre position, the plane can be used for cutting rebates, and has a fine screw adjuster for precise control of the depth of cut. With the cutter moved to the front position, the plane can also be used for cutting into corners (bullnose work). 5-year guarantee.Presented in a hinged wooden box. Cutter Width: 38mm.Overall length: 255mm.
The Faithfull Set of 5 Mini Tools in a wooden presentation case containing 1 each of the following mini tools: 1 x Woodworking Plane1 x Combination Marking Gauge1 x Sliding Bevel1 x Try Square1 x Dove Tail Square. All made from hardwood and brass fittings to the same exacting standards as their regular sized counterparts.
This Faithfull Plane Set is supplied in two zip up canvas carry bags, designed to protect the planes against damage during transport or when in storage. Provides the essentials you need for planing wood: 1 x No.4 Smoothing Plane, designed for smoothing and final finishing. Made with a quality grey cast iron body for strength and stability with precision ground base and sides for flatness and squareness. Machined seatings eliminate movement and blade judder. A lever cap with a brass locking screw secures the blade assembly and enables easy release for sharpening. Wooden handles and guidance knobs maximise user comfort. A solid brass blade adjustment nut completes the appeal of these traditional tools. Cutter Width: 50mm.Overall Length: 250mm. 1 x 60.1/2 Block Plane has the plane iron set at 13.5°. It is particularly effective on end grain and plastic laminates. Block planes are designed for end grain work or in any situation where a single handed operation is required. The low angle cutter and fully adjustable mouth, from wide for coarse work to narrow for the fine shaving of awkward grain. Cutter Width: 35mm.Overall Length: 160mm.
The Faithfull Webbing Stretcher is a beechwood tensioning tool used for installing upholstery webbing. Rebated on one edge for frame location with a slot and peg for holding the webbing firmly in place during installation. The webbing is looped through the slot and held by the dowel, allowing the stretcher to adjust the web tension prior to fixing. Accepts webbing up to 50mm (2in) wide.
These Faithfull mitre blocks are made from high quality European beech, the sides and bases are glued and screwed together to provide extra strength and durability. With accurate slots for cutting 45° or 90° angles, they are designed for use with tenon or backsaws. Ideal for use when cutting picture frame joints and general carpentry work.Block Length: 300mm (12in) Block Width: 64mm (2.1/2in)
