The Lessmann DIY Wheel Brushes are fitted with a 6mm shank and are generally used for the removal of rust, paint or dirt and for roughening, de-burring, stripping or polishing. Available in Steel or Brass.The Lessmann DIY Wheel Brush has the following specification: Wire Type: SteelDiameter: 75mm.Width: 8-10mm.Wire Gauge: 0.30.Shank: 6mm.Max Speed: 4,500/rpm.
The Lessmann DIY Steel Wire Cylinder Brush is fitted with a 6mm shank. Used for cleaning tubes, gratings, sleeves and cylinders. Ideal for use on wrought iron. Diameter: 28mmWire Gauge: 0.30Shank: 6mmMax Speed: 1,500/min.
A crimped steel circular wire brush designed to be mounted on a bench grinder. The wire wheels are ideal for the removal of rust, corrosion, paint, weld spatter and general surface deburring. It is supplied complete with plastic inserts (bushes) to enable the wheel to be mounted on grinders with smaller drive spindles.The Faithfull FAIWBWW200 conforms to ISO 9001 and DIN EN1083-1 and 2 and has the following specifications:Diameter: 200mm x 25mm faceBore range size: 32mm (25, 22, 20, 16 &12mm bushes included)Wire: 0.3mmType: Circular
This Faithfull Wire Cup Brush is designed for use with angle grinders with a compatible thread. It is suitable for industrial use and more specialist applications. Crimped wire brushes are designed for lighter to medium-duty applications such as cleaning metal surfaces prior to painting.Wire: Steel Type: Cup Face Diameter: 125mm Thread: M14 x 2 Wire: 0.3mm Conforms to ISO 9001 and DIN EN1083-1 and 2 Maximum rpm 6,500.
This Faithfull crimped steel Wire Circular Brush is designed for light to medium-duty applications such as cleaning metal surfaces prior to welding or painting. Fitted with a 6mm (1/4in) shank and designed to operate with power tools up to a maximum of 4,500/min. Shaft: 6mm (1/4in). Wire: 0.30mm crimped steel wire. Conforms to ISO 9001 and DIN EN1083-1 and 2 standards.Diameter: 50mm.
The Lessmann DIY Wheel Brushes are fitted with a 6mm shank and are generally used for the removal of rust, paint or dirt and for roughening, de-burring, stripping or polishing. Available in Steel or Brass.The Lessmann DIY Wheel Brush has the following specification: Wire Type: Brass.Diameter: 75mm.Width: 8-10mm.Wire Gauge: 0.25.Shank: 6mm.Max Speed: 4,500/rpm.
The Lessmann Wheel Brushes are fitted with a 6mm shank. The tight filling wire and powerful running makes these brushes excellent tools. These encapsulated brushes have a long service life due to the bedding of wire in plastic, which also prevents end breakage. The brushes have a consistent working width.The Lessmann Knotted Wheel Brush With Shank has the following specification: Wire Type: Steel.Diameter: 50mm.Width: 18-20mm.Shank: 6mm.Wire Gauge: 0.30.Max Speed: 15,000/rpm.
The Faithfull Flat Twist Knot Wire Brush is compatible with 115mm (4.1/2in) angle grinders with a M14 x 2 mount. Twist knot brushes are suitable for the removal of slag, rust, scale or even dried cement. Perfect for use on stainless steel. Standard wire brushes when used on stainless steel can contaminate and cause the material to rust. Conforms to ISO 9001, DIN EN 1083-1 and 2. Specification: Diameter: 115 x 12mm faceThread: M14 x 2Wire: Twist Knot Stainless Steel Grade 304, 0.35mm
The Lessmann End Brushes are fitted with a 6mm shank for cleaning and de-burring in hard to reach areas. They are ideal for the removal of paint and the cleaning of moulds and castings. Also for working on edges and recesses and the inside of bores etc.The Lessmann End Brush With Shank has the following specification: Wire Type: Steel.Diameter: 12mmWire Height: 20mm.Wire Gauge: 0.30.Max Speed: 20,000/rpm.
The Lessmann Wheel Brushes are filled with crimped wire and are used for obtaining different surface finishes. For the removal of rust, paint and dirt, for roughening, de-burring. Stripping or polishing. A decisive factor for choosing the most suitable brush is the wire and tube diameter. Brushes with a larger tube diameter are filled with more wire, are more aggressive and have a longer life. Some of the brushes are supplied with adaptor sets that allow easy mounting on all popular grinding machines. The adaptors have the following dimensions: Set 1: 30, 22.2, 20, 16 & 12mm, 1in & 1/2in. Set 2: 40, 32, 22.2, 20, & 16mm, 1in & 1/2in.Set 3: 50, 32, 22.2, 20, & 16mm, 1in & 1/2in.Set 4: Brushes With Metal Discs Bore 50.8 & Double Keyway 7x13; Plus Adaptor to Bore 30.Diameter. 250mm.Width.30-35mmMin/Max Bore: 20/100mm. Wire Gauge.0.30.Wire Type. Steel Crimped.Max R.P.M. 3,600.
The Lessmann End Brushes are fitted with a 6mm shank for cleaning and de-burring in hard to reach areas. They are ideal for the removal of paint and the cleaning of moulds and castings. Also for working on edges and recesses and the inside of bores etc.The Lessmann Pointed End Brush With Shank has the following specification: Wire Type: Steel.Diameter: 23mm.Wire Height: 25mm.Wire Gauge: 0.30.Max Speed: 18,000/rpm.
The Lessmann Wheel Brushes are filled with crimped wire and are used for obtaining different surface finishes. For the removal of rust, paint and dirt, for roughening, de-burring. Stripping or polishing. A decisive factor for choosing the most suitable brush is the wire and tube diameter. Brushes with a larger tube diameter are filled with more wire, are more aggressive and have a longer life. Some of the brushes are supplied with adaptor sets that allow easy mounting on all popular grinding machines. The adaptors have the following dimensions: Set 1: 30, 22.2, 20, 16 & 12mm, 1in & 1/2in. Set 2: 40, 32, 22.2, 20, & 16mm, 1in & 1/2in.Set 3: 50, 32, 22.2, 20, & 16mm, 1in & 1/2in.Set 4: Brushes With Metal Discs Bore 50.8 & Double Keyway 7x13; Plus Adaptor to Bore 30.Diameter. 200mm.Width. 24-27mm.Min/Max Bore: 16/50mm.Wire Gauge. 0.30/0.35.Wire Type. Steel Crimped.Max R.P.M. 4,500.
The Lessmann Conical Knot Brushes with left hand twisted knots to increase stability. The special shape of the conical brushes enables the user to work in hard to reach places. They have been designed for heavy-duty use, for the preparing of metal surfaces before painting, and the removal of slag, rust, scale, or concrete waste.Diameter. 115mm.Width.10mm.Bore. M14.Wire Gauge.0.50.Wire Type. Steel.Max R.P.M. 12,500.
The Lessmann Cup Brush is fitted with 6mm shank and is ideal for working on medium to large areas. They are generally used for the removal of rust, paint, dirt or scale, and for polishing.Diameter.40mm.Width. 10mm.Wire Height. 15mm.Wire Gauge.0.30Wire Type. Steel.Max. R. P. M. 15,000
The Lessmann Cup Brush is fitted with 6mm shank and is ideal for working on medium to large areas. They are generally used for the removal of rust, paint, dirt or scale, and for polishing.Diameter.70mm.Width. 15mm.Wire Height. 25mm.Wire Gauge.0.30.Wire Type. Steel.Max. R. P. M. 4,500
This Lessmann Knotted Wheel Brush has the following specification: Wire Type: SteelWire Gauge: 0.50Diameter: 75mmWidth: 9mmShank: 6mmMax Speed: 20,000/rpm
These Faithfull brushes have nylon bristles for use on wood, metal and stone. Many times the life of a wire brush. Conform to ISO 9001 and DIN EN1083-1 and 2. The 6mm shank enables them to be used with a power tool with a maximum of 4500rpm.The Faithfull FAIWBN65 Nylon cup brush has the following dimensions:Size: 65mm diameter x 6mm shaft x 1.5mm bristle.
This Faithfull Wire End Brush is suitable for cleaning paint or deburring moulds or castings in hard-to-reach areas such as cylinders. The brush has crimped steel wire and is designed for light to medium-duty applications. Suitable for use in industrial power tools at higher speeds. The FAIWBS25E Wire End Brush has the following specifications: Type: Flat End. Face Diameter: 25 mm. Shaft: 6 mm (1/4 inch). Wire: 0.3 mm crimped steel. Conforms to ISO 9001. and DIN EN1083-1 and 2.
The Lessmann Knot Wheel Brushes are for grinders, angle grinders and stationary machines, used in the preparation and re-working of bolt fillet and butt welds. They remove scale, rust, paint, slag, rubber residue and can be used for de-burring. They are filled with a special high tensile strength steel wire in order to meet the exacting requirements during use.This Lessmann Knot Wheel Brush has the following specification: Diameter: 115mm.Width: 14mm.Bore: 22.2mm.Wire Gauge: 0.50.Wire Type: Steel.Max RPM: 12,500/min.
Knot Cup Brushes are for heavy-duty use for the preparing of metal surfaces before painting, and the removal of slag, rust, scale or concrete waste.Lessmann knotted brushes are filled with a special steel wire of high tensile strength in order to meet the demands of this type of brush. Products marked with a * have a bridle fitted which an be removed to expose a further 20mm of useable wire.Stability bridle fitted. Diameter. 125mm.Bore. M14.Wire Gauge. 0.50.Wire Type. Steel.Max. R.P.M. 6,500.
This Lessmann Pipeline Brush has the following specification: Wire: SteelNumber of Knots: 48Diameter: 178mmWidth: 6mmBore: 22.2mmMax. Speed: 12,500/bpm
The Lessmann Cup Brushes are filled with crimped wire and are ideal for working on large surfaces. They can also be used for the removal of rust, paint, dirt or scale and for polishing. A range of sizes and wire styles are available.Diameter. 75mm.Wire Height. 25mm.Bore. M14.Wire Gauge. 0.35.Wire Type. Steel.Max. R.P.M. 12,000.
The Lessmann Cup Brushes are filled with crimped wire and are ideal for working on large surfaces. They can also be used for the removal of rust, paint, dirt or scale and for polishing. A range of sizes and wire styles are available.Diameter. 125mm.Wire Height. 40mm.Bore. M14.Wire Gauge. 0.35. Wire Type. Steel.Max. R.P.M. 6,500
The Lessmann Wheel Brushes are fitted with a 6mm shank. The tight filling wire and powerful running makes these brushes excellent tools. These encapsulated brushes have a long service life due to the bedding of wire in plastic, which also prevents end breakage. The brushes have a consistent working width.The Lessmann Knotted Wheel Brush With Shank has the following specification: Wire Type: Steel.Diameter: 70mm.Width: 18-20mm.Shank: 6mm.Wire Gauge: 0.30.Max Speed: 15,000/rpm.
This Lessmann Pipeline Brush has the following specification: Wire: Stainless SteelNumber of Knots: 40Diameter: 125mmWidth: 6mmBore: 22.2mmMax. Speed: 15,000/bpm
The Lessmann Cup Brush is fitted with 6mm shank and is ideal for working on medium to large areas. They are generally used for the removal of rust, paint, dirt or scale, and for polishing.Diameter. 50mm.Width.10mm.Wire Height. 20mm.Wire Gauge.0.30.Wire Type. Steel.Max. R. P. M.10,500.
The Lessmann Wheel Brushes are filled with crimped wire and are used for obtaining different surface finishes. For the removal of rust, paint and dirt, for roughening, de-burring. Stripping or polishing. A decisive factor for choosing the most suitable brush is the wire and tube diameter. Brushes with a larger tube diameter are filled with more wire, are more aggressive and have a longer life. Some of the brushes are supplied with adaptor sets that allow easy mounting on all popular grinding machines. The adaptors have the following dimensions: Set 1: 30, 22.2, 20, 16 & 12mm, 1in & 1/2in. Set 2: 40, 32, 22.2, 20, & 16mm, 1in & 1/2in.Set 3: 50, 32, 22.2, 20, & 16mm, 1in & 1/2in.Set 4: Brushes With Metal Discs Bore 50.8 & Double Keyway 7x13; Plus Adaptor to Bore 30.Diameter. 200mm.Width. 45-48mm.Min/Max Bore: 16/80mm.Wire Gauge. 0.30/0.35.Wire Type. Steel Crimped.Max R.P.M. 4,500.
This Lessmann Pipeline Brush has the following specification: Wire: SteelNumber of Knots: 40Diameter: 125mmWidth: 6mmBore: 22.2mmMax. Speed: 15,000/bpm
The Lessmann DIY Wheel Brushes are fitted with a 6mm shank and are generally used for the removal of rust, paint or dirt and for roughening, de-burring, stripping or polishing. Available in Steel or Brass.The Lessmann DIY Wheel Brush has the following specification: Wire Type: SteelDiameter: 100mm.Width: 8-10mm.Wire Gauge: 0.30.Shank: 6mm.Max Speed: 4,500/rpm.
The Lessmann Wheel Brushes are filled with crimped wire and are used for obtaining different surface finishes. For the removal of rust, paint and dirt, for roughening, de-burring. Stripping or polishing. A decisive factor for choosing the most suitable brush is the wire and tube diameter. Brushes with a larger tube diameter are filled with more wire, are more aggressive and have a longer life. Some of the brushes are supplied with adaptor sets that allow easy mounting on all popular grinding machines. The adaptors have the following dimensions: Set 1: 30, 22.2, 20, 16 & 12mm, 1in & 1/2in. Set 2: 40, 32, 22.2, 20, & 16mm, 1in & 1/2in.Set 3: 50, 32, 22.2, 20, & 16mm, 1in & 1/2in.Set 4: Brushes With Metal Discs Bore 50.8 & Double Keyway 7x13; Plus Adaptor to Bore 30.Stainless Steel Wire Wheel Brush for heavier applications and where ordinary wire would contaminate the work piece. Size. Diameter. 200 mm.Width. 24 mm - 27 mm.Min/Max Bore: 16/50mm. Wire Type. Stainless Steel.
Designed for use with angle grinders with a compatible thread and are suitable for industrial use and more specialist applications. Twist knot wire brushes are suited to heavier duty applications such as the removal of slag, rust, scale or even dried concrete. Wire: High tensile twisted steel Type: CupFace Diameter: 65mm Thread: M10 x 1.25 Wire: 0.5mm Conforms to ISO 9001 and DIN EN1083-1 and 2 Maximum rpm 12,500.
This Faithfull Wire End Brush is suitable for cleaning paint or deburring moulds or castings in hard-to-reach areas such as cylinders. The brush has crimped steel wire and is designed for light to medium-duty applications. Suitable for use in industrial power tools at higher speeds. The FAIWBSI12P Wire End Brush has the following specifications: Type: Pointed end. Face diameter: 12/60 mm x 20 mm. Shaft: 6 mm (1/4in). Wire: 0.3 mm steel. Conforms to ISO 9001. and DIN EN1083-1 and 2.
This Faithfull Wire End Brush is suitable for cleaning paint or deburring moulds or castings in hard-to-reach areas such as cylinders. The brush has crimped steel wire and is designed for light to medium-duty applications. Suitable for use in industrial power tools at higher speeds. Suitable for cleaning paint or deburring of moulds or castings in hard-to-reach areas such as cylinders. Can be used in industrial power tools at higher speeds. Type: Pointed end Face diameter: 23/60 mm x 25 mm Shaft: 6 mm (1/4in) Wire: 0.3 mm steel Conforms to ISO 9001. and DIN EN1083-1 and 2 Maximum rpm 20,000.
