Varilight

The Varilight Screwless low profile collection offers minimalism with style and a flawless finish. The plate just clips on after installation. Each switch does need to be earthed and is designed to fit into UK standard wall boxes. Covered by the Varilight 10 year guaranty. Single plate size: 86mm x 86mm. Double plate size: 86mm x 147mm. 13A Plug sockets: Require a 35mm deep wall box. USBÕs are 2.1A. Rocker & Toggle Light Switches: 2 way (unless stated as intermediate), 10A rated and require a 25mm deep wall box. Halogen & LED Dimmers: 2 Way. Please check product title for dimmer spec and maximum and minimum load. Require a 35mm wall box. 5 Amp Socket: Require a 35mm deep wall box. Shaver Socket: Require a 47mm deep wall box. Dual Voltage Shaver Socket 240V/115V. Suitable for use in bathrooms, toilets and shower rooms (IP41). Cooker Switch: Require a 35mm deep wall box. 45 Amp Double pole. Fused Spur: Require a 35mm deep wall box. 13 Amp Double pole. TV Socket: Require a 25mm deep wall box. 20 Amp: Require a 25mm deep wall box. Fan Isolator: Require a 35mm deep wall box. 10A Fan Isolating Switch (3 Pole). DataGrid Plates: Clip in any combination of DataGrid modules (need to be bought from us separately). Compatible with all standard Euro data modules (Varilight, Triax, RetroTouch etc). Create your own data combinations. Touch/Remote LED Dimmers: V-Pro IR (infra-red) Dimmers. 0-100W (1-10 LEDs). Require a 35mm deep wall box. V-Pro intelligent dimming technology. Touch control or remote control from dedicated handset (not included, Varilight YRC8 can be bought separately), or can use a spare button on an existing handset (e.g. TV remote). 1-way or multi-way when used with V-Pro IR dimming slave unit(s). Soft start feature and intelligent overload protection. Touch Slaves: Can not be used on their own, must be used with a master dimmer to make a 2 way or multi-way circuit. Require a 35mm deep wall box. _V-Pro Multi-Point (formerly Eclique2) Dimmer _2-Gang Tactile Touch Control Dimming Slave for use with Multi-Point (formerly Eclique2) Master on 2-Way Circuits _V-Pro intelligent dimming technology _Soft start feature and intelligent overload protection _Use with touch & remote master Multi-Point dimmers in multi-way circuits

Read more less

4-Gang 1-Way V-Pro Multi-Point Remote/Tactile Touch Control Master LED Dimmer 4 x 0-100W (1-10 LEDs) (Twin Plate) _V-Pro intelligent dimming technology _Tactile touch control or remote control from dedicated handset or spare button on an existing handset (e.g. TV remote) _Soft start feature and intelligent overload protection _1-way or multi-way when used with Multi-Point dimming slave unit(s) _Sleek, low-profile screwless faceplate

Read more less

3-Gang 1-Way V-Pro Multi-Point Remote/Tactile Touch Control Master LED Dimmer 3 x 0-100W (1-10 LEDs) (Twin Plate) _V-Pro intelligent dimming technology _Tactile touch control or remote control from dedicated handset or spare button on an existing handset (e.g. TV remote) _Soft start feature and intelligent overload protection _1-way or multi-way when used with Multi-Point dimming slave unit(s) _Sleek, low-profile screwless faceplate

Read more less

The Varilight Screwless low profile collection offers minimalism with style and a flawless finish. The plate just clips on after installation. Each switch does need to be earthed and is designed to fit into UK standard wall boxes. Covered by the Varilight 10 year guaranty. Single plate size: 86mm x 86mm. Double plate size: 86mm x 147mm. 13A Plug sockets: Require a 35mm deep wall box. USBÕs are 2.1A. Rocker & Toggle Light Switches: 2 way (unless stated as intermediate), 10A rated and require a 25mm deep wall box. Halogen & LED Dimmers: 2 Way. Please check product title for dimmer spec and maximum and minimum load. Require a 35mm wall box. 5 Amp Socket: Require a 35mm deep wall box. Shaver Socket: Require a 47mm deep wall box. Dual Voltage Shaver Socket 240V/115V. Suitable for use in bathrooms, toilets and shower rooms (IP41). Cooker Switch: Require a 35mm deep wall box. 45 Amp Double pole. Fused Spur: Require a 35mm deep wall box. 13 Amp Double pole. TV Socket: Require a 25mm deep wall box. 20 Amp: Require a 25mm deep wall box. Fan Isolator: Require a 35mm deep wall box. 10A Fan Isolating Switch (3 Pole). DataGrid Plates: Clip in any combination of DataGrid modules (need to be bought from us separately). Compatible with all standard Euro data modules (Varilight, Triax, RetroTouch etc). Create your own data combinations. Touch/Remote LED Dimmers: V-Pro IR (infra-red) Dimmers. 0-100W (1-10 LEDs). Require a 35mm deep wall box. V-Pro intelligent dimming technology. Touch control or remote control from dedicated handset (not included, Varilight YRC8 can be bought separately), or can use a spare button on an existing handset (e.g. TV remote). 1-way or multi-way when used with V-Pro IR dimming slave unit(s). Soft start feature and intelligent overload protection. Touch Slaves: Can not be used on their own, must be used with a master dimmer to make a 2 way or multi-way circuit. Require a 35mm deep wall box. _V-Pro Multi-Point Remote (formerly Eclique2) Dimmer _1-Gang 1-Way V-Pro Multi-Point Remote/Tactile Touch Control Master LED Dimmer 1 x 0-100W (1-10 LEDs) _V-Pro intelligent dimming technology _Tactile touch control or remote control from dedicated handset or spare button on an existing handset (e.g. TV remote) _Soft start feature and intelligent overload protection

Read more less

Standard V-Pro dimmers have a push-on/push-off switch action with rotary dimming. You can change the driving modes and adjust the minimum brightness with pushes of the dimmer control and using signals from the lamps. You can view the programming instructions on the dimmer leaflet or, alternatively, you can view Varilight video on YouTube using this link:- https://www.youtube.com/watch?v=Id1E2hQpX-w . V-Pro series dimmers are designed for use with LEDs and they are also suitable for halogen and incandescent lighting, most dimmable electronic transformers and with no minimum load, are suitable for dimmable low energy lighting. The V-Pro Series, eliminates Dimmer Buzz For GLS Bulbs, GU10 Lamps, and LV Transformers Including Trailing Edge Loads and is equipped with Self Re-setting Overload Protection, so is able to handle overload situations, for example, if the wattage of the bulbs/lamps are accidentally too high on a circuit. This is achieved by the dimmer cutting out before there is any damage, (if the watts are grossly overloaded), until the load is reduced. The dimmer also contains a heat sensor which again stops damage to the dimmer, if it becomes too hot. Please adhere to maximum rating listed on the Varilight datasheets on their website or copy and paste the link for the V-Pro instruction leaflet: - http://www.varilight.co.uk/leaflets/VARILIGHT%20V-Pro%20Dimmer%20Instructions%20776.pdf .These dimmers do not work with lighting panels (LED or CFL) and are not suitable for wire-wound "toroidal" transformers. Please note that only good quality dimmable LEDs should be used. If this dimmer is purchased and the LED lamps are not compatible, the dimmer is not faulty so cannot be returned, but a better quality LED lamp/bulb should be fitted instead. Trailing and Leading Edge Dimmer, please refer to instructions provided with the dimmer, which explains all 3 dimming modes. _Dimmable LED load 10w-120w (per dimmer) _Suitable for 1-10 good quality LED lamps per dimmer module _For Incandescent bulbs, mains, eco and L/V halogen bulbs please click on the link in the product description below. _V-Pro dimmers are suitable for dimmable LEDs, dimmable ESLs, electronic transformers, trailing edge, standard bulbs, GU10 and mains halogen _Fits a 25 mm wall box

Read more less

The Varilight Screwless low profile collection offers minimalism with style and a flawless finish. The plate just clips on after installation. Each switch does need to be earthed and is designed to fit into UK standard wall boxes. Covered by the Varilight 10 year guaranty. Single plate size: 86mm x 86mm. Double plate size: 86mm x 147mm. 13A Plug sockets: Require a 35mm deep wall box. USBÕs are 2.1A. Rocker & Toggle Light Switches: 2 way (unless stated as intermediate), 10A rated and require a 25mm deep wall box. Halogen & LED Dimmers: 2 Way. Please check product title for dimmer spec and maximum and minimum load. Require a 35mm wall box. 5 Amp Socket: Require a 35mm deep wall box. Shaver Socket: Require a 47mm deep wall box. Dual Voltage Shaver Socket 240V/115V. Suitable for use in bathrooms, toilets and shower rooms (IP41). Cooker Switch: Require a 35mm deep wall box. 45 Amp Double pole. Fused Spur: Require a 35mm deep wall box. 13 Amp Double pole. TV Socket: Require a 25mm deep wall box. 20 Amp: Require a 25mm deep wall box. Fan Isolator: Require a 35mm deep wall box. 10A Fan Isolating Switch (3 Pole). DataGrid Plates: Clip in any combination of DataGrid modules (need to be bought from us separately). Compatible with all standard Euro data modules (Varilight, Triax, RetroTouch etc). Create your own data combinations. Touch/Remote LED Dimmers: V-Pro IR (infra-red) Dimmers. 0-100W (1-10 LEDs). Require a 35mm deep wall box. V-Pro intelligent dimming technology. Touch control or remote control from dedicated handset (not included, Varilight YRC8 can be bought separately), or can use a spare button on an existing handset (e.g. TV remote). 1-way or multi-way when used with V-Pro IR dimming slave unit(s). Soft start feature and intelligent overload protection. Touch Slaves: Can not be used on their own, must be used with a master dimmer to make a 2 way or multi-way circuit. Require a 35mm deep wall box. _V-Pro Multi-Point (formerly Eclique2) Dimmer _4-Gang Tactile Touch Control Dimming Slave for use with Multi-Point (formerly Eclique2) Master on 2-Way Circuits (Twin Plate) _V-Pro intelligent dimming technology _Soft start feature and intelligent overload protection _Use with touch & remote master Multi-Point dimmers in multi-way circuits

Read more less

Range: Screwless Finish: Polished Chrome : V-Pro Multi-Point Remote (formerly Eclique2) Dimmer Insert/Knob Colour: Chrome Buttons Barcode: 5021575102178 Dimensions: 86x147x27mm Faceplate Depth: 4mm Product Weight: 220g Fixing Centres: 120.6mm Recommended Back Box Depth: 35mm Operating Voltage: 220/250V AC Maximum Load Rating: LED; 100W (Halogen; 250W) Maximum Current Rating: 1.1A Terminal (Live) Diameter: 3.2mm; Capacity: 3 x 1.5mm_ Terminal (Earth) Diameter: 3.3mm; Capacity: 3 x 1.5mm_ _Available in 1, 2, 3 or 4 gang options. _1 way or 2 way operation. For 2 way dimming you need to add an Eclique slave dimmer as it won't work with a normal 2 way light switch. _With soft start and automatic overload protection. _Can reprogrammed to adapt to different lighting circuits by pressing your finger on the button for 12 seconds.

Read more less

Varilight Eclique dimmer switches are suitable for dimming LED lamps and downlights. This includes mains voltage GU10 LEDs and integrated LED downlights, it also works with halogen and incandescent. Unlike conventional rotary dimmer switches (see V-Pro), the Eclique range has touch dimmers. _Available in 1, 2, 3 or 4 gang options. _1 way or 2 way operation. For 2 way dimming you need to add an Eclique slave dimmer as it won't work with a normal 2 way light switch. _With soft start and automatic overload protection. _Can reprogrammed to adapt to different lighting circuits by pressing your finger on the button for 12 seconds.

Read more less

The British made Varilight V-Pro is an award winning, high quality universal dimmer switch that is compatible with LED lamps and downlights. This includes mains voltage GU10 LEDs and integrated LED downlights, it also works with CFL, halogen and incandescent. _Available in 1, 2, 3 or 4 gang options. _1 way or 2 way operation. Allows dimming from 1 side of the room and switching from another. If 2 way dimming is required then see the Varilight Eclique range were a master and slave touch dimmer can be used. _Control knob has push on / off function. _With soft start and automatic overload protection.

Read more less

Standard V-Pro dimmers have a push-on/push-off switch action with rotary dimming. You can change the driving modes and adjust the minimum brightness with pushes of the dimmer control and using signals from the lamps. You can view the programming instructions on the dimmer leaflet or, alternatively, you can view Varilight video on YouTube using this link:- https://www.youtube.com/watch?v=Id1E2hQpX-w . V-Pro series dimmers are designed for use with LEDs and they are also suitable for halogen and incandescent lighting, most dimmable electronic transformers and with no minimum load, are suitable for dimmable low energy lighting. The V-Pro Series, eliminates Dimmer Buzz For GLS Bulbs, GU10 Lamps, and LV Transformers Including Trailing Edge Loads and is equipped with Self Re-setting Overload Protection, so is able to handle overload situations, for example, if the wattage of the bulbs/lamps are accidentally too high on a circuit. This is achieved by the dimmer cutting out before there is any damage, (if the watts are grossly overloaded), until the load is reduced. The dimmer also contains a heat sensor which again stops damage to the dimmer, if it becomes too hot. Please adhere to maximum rating listed on the Varilight datasheets on their website or copy and paste the link for the V-Pro instruction leaflet: - http://www.varilight.co.uk/leaflets/VARILIGHT%20V-Pro%20Dimmer%20Instructions%20776.pdf .These dimmers do not work with lighting panels (LED or CFL) and are not suitable for wire-wound "toroidal" transformers. Please note that only good quality dimmable LEDs should be used. If this dimmer is purchased and the LED lamps are not compatible, the dimmer is not faulty so cannot be returned, but a better quality LED lamp/bulb should be fitted instead. Trailing and Leading Edge Dimmer, please refer to instructions provided with the dimmer, which explains all 3 dimming modes. _Dimmable LED load 10w-120w (per dimmer) _Suitable for 1-10 good quality LED lamps per dimmer module _For Incandescent bulbs, mains, eco and L/V halogen bulbs please click on the link in the product description below. _V-Pro dimmers are suitable for dimmable LEDs, dimmable ESLs, electronic transformers, trailing edge, standard bulbs, GU10 and mains halogen _Fits a 25 mm wall box

Read more less

The Varilight Screwless low profile collection offers minimalism with style and a flawless finish. The plate just clips on after installation. Each switch does need to be earthed and is designed to fit into UK standard wall boxes. Covered by the Varilight 10 year guaranty. Single plate size: 86mm x 86mm. Double plate size: 86mm x 147mm. 13A Plug sockets: Require a 35mm deep wall box. USBÕs are 2.1A. Rocker & Toggle Light Switches: 2 way (unless stated as intermediate), 10A rated and require a 25mm deep wall box. Halogen & LED Dimmers: 2 Way. Please check product title for dimmer spec and maximum and minimum load. Require a 35mm wall box. 5 Amp Socket: Require a 35mm deep wall box. Shaver Socket: Require a 47mm deep wall box. Dual Voltage Shaver Socket 240V/115V. Suitable for use in bathrooms, toilets and shower rooms (IP41). Cooker Switch: Require a 35mm deep wall box. 45 Amp Double pole. Fused Spur: Require a 35mm deep wall box. 13 Amp Double pole. TV Socket: Require a 25mm deep wall box. 20 Amp: Require a 25mm deep wall box. Fan Isolator: Require a 35mm deep wall box. 10A Fan Isolating Switch (3 Pole). DataGrid Plates: Clip in any combination of DataGrid modules (need to be bought from us separately). Compatible with all standard Euro data modules (Varilight, Triax, RetroTouch etc). Create your own data combinations. Touch/Remote LED Dimmers: V-Pro IR (infra-red) Dimmers. 0-100W (1-10 LEDs). Require a 35mm deep wall box. V-Pro intelligent dimming technology. Touch control or remote control from dedicated handset (not included, Varilight YRC8 can be bought separately), or can use a spare button on an existing handset (e.g. TV remote). 1-way or multi-way when used with V-Pro IR dimming slave unit(s). Soft start feature and intelligent overload protection. Touch Slaves: Can not be used on their own, must be used with a master dimmer to make a 2 way or multi-way circuit. Require a 35mm deep wall box. _V-Pro Multi-Point (formerly Eclique2) Dimmer _4-Gang Tactile Touch Control Dimming Slave for use with Multi-Point (formerly Eclique2) Master on 2-Way Circuits (Twin Plate) _V-Pro intelligent dimming technology _Soft start feature and intelligent overload protection _Use with touch & remote master Multi-Point dimmers in multi-way circuits

Read more less

The Varilight Screwless low profile collection offers minimalism with style and a flawless finish. The plate just clips on after installation. Each switch does need to be earthed and is designed to fit into UK standard wall boxes. Covered by the Varilight 10 year guaranty. Single plate size: 86mm x 86mm. Double plate size: 86mm x 147mm. 13A Plug sockets: Require a 35mm deep wall box. USBÕs are 2.1A. Rocker & Toggle Light Switches: 2 way (unless stated as intermediate), 10A rated and require a 25mm deep wall box. Halogen & LED Dimmers: 2 Way. Please check product title for dimmer spec and maximum and minimum load. Require a 35mm wall box. 5 Amp Socket: Require a 35mm deep wall box. Shaver Socket: Require a 47mm deep wall box. Dual Voltage Shaver Socket 240V/115V. Suitable for use in bathrooms, toilets and shower rooms (IP41). Cooker Switch: Require a 35mm deep wall box. 45 Amp Double pole. Fused Spur: Require a 35mm deep wall box. 13 Amp Double pole. TV Socket: Require a 25mm deep wall box. 20 Amp: Require a 25mm deep wall box. Fan Isolator: Require a 35mm deep wall box. 10A Fan Isolating Switch (3 Pole). DataGrid Plates: Clip in any combination of DataGrid modules (need to be bought from us separately). Compatible with all standard Euro data modules (Varilight, Triax, RetroTouch etc). Create your own data combinations. Touch/Remote LED Dimmers: V-Pro IR (infra-red) Dimmers. 0-100W (1-10 LEDs). Require a 35mm deep wall box. V-Pro intelligent dimming technology. Touch control or remote control from dedicated handset (not included, Varilight YRC8 can be bought separately), or can use a spare button on an existing handset (e.g. TV remote). 1-way or multi-way when used with V-Pro IR dimming slave unit(s). Soft start feature and intelligent overload protection. Touch Slaves: Can not be used on their own, must be used with a master dimmer to make a 2 way or multi-way circuit. Require a 35mm deep wall box. _V-Pro Multi-Point (formerly Eclique2) Dimmer _3-Gang Tactile Touch Control Dimming Slave for use with Multi-Point (formerly Eclique2) Master on 2-Way Circuits (Twin Plate) _V-Pro intelligent dimming technology _Soft start feature and intelligent overload protection _Use with touch & remote master Multi-Point dimmers in multi-way circuits

Read more less

The Varilight Screwless low profile collection offers minimalism with style and a flawless finish. The plate just clips on after installation. Each switch does need to be earthed and is designed to fit into UK standard wall boxes. Covered by the Varilight 10 year guaranty. Single plate size: 86mm x 86mm. Double plate size: 86mm x 147mm. 13A Plug sockets: Require a 35mm deep wall box. USBÕs are 2.1A. Rocker & Toggle Light Switches: 2 way (unless stated as intermediate), 10A rated and require a 25mm deep wall box. Halogen & LED Dimmers: 2 Way. Please check product title for dimmer spec and maximum and minimum load. Require a 35mm wall box. 5 Amp Socket: Require a 35mm deep wall box. Shaver Socket: Require a 47mm deep wall box. Dual Voltage Shaver Socket 240V/115V. Suitable for use in bathrooms, toilets and shower rooms (IP41). Cooker Switch: Require a 35mm deep wall box. 45 Amp Double pole. Fused Spur: Require a 35mm deep wall box. 13 Amp Double pole. TV Socket: Require a 25mm deep wall box. 20 Amp: Require a 25mm deep wall box. Fan Isolator: Require a 35mm deep wall box. 10A Fan Isolating Switch (3 Pole). DataGrid Plates: Clip in any combination of DataGrid modules (need to be bought from us separately). Compatible with all standard Euro data modules (Varilight, Triax, RetroTouch etc). Create your own data combinations. Touch/Remote LED Dimmers: V-Pro IR (infra-red) Dimmers. 0-100W (1-10 LEDs). Require a 35mm deep wall box. V-Pro intelligent dimming technology. Touch control or remote control from dedicated handset (not included, Varilight YRC8 can be bought separately), or can use a spare button on an existing handset (e.g. TV remote). 1-way or multi-way when used with V-Pro IR dimming slave unit(s). Soft start feature and intelligent overload protection. Touch Slaves: Can not be used on their own, must be used with a master dimmer to make a 2 way or multi-way circuit. Require a 35mm deep wall box. _V-Pro Multi-Point Remote (formerly Eclique2) Dimmer _4-Gang 1-Way V-Pro Multi-Point Remote/Tactile Touch Control Master LED Dimmer 4 x 0-100W (1-10 LEDs) (Twin Plate) _V-Pro intelligent dimming technology _Tactile touch control or remote control from dedicated handset or spare button on an existing handset (e.g. TV remote) _Soft start feature and intelligent overload protection

Read more less

Range: Classic. Finish: Mirror Chrome. : V-Pro Multi-Point Remote (formerly Eclique2) Dimmer. : 1-Gang 1-Way V-Pro Multi-Point Remote/Tactile Touch Control Master LED Dimmer 1 x 0-100W (1-10 LEDs). Insert/Rocker Colour: Chrome Button. Features: V-Pro intelligent dimming technology. Tactile touch control or remote control from dedicated handset or spare button on an existing handset (e.g. TV remote). Soft start feature and intelligent overload protection. 1-way or multi-way when used with Multi-Point dimming slave unit(s). Bevelled edge faceplate. Dimensions: 91x91x27mm. Faceplate Depth: 8mm. Product Weight (g): 130. Fixing Centres: 60.3mm. Depth from Mounting Face: 16.1mm. Recommended Minimum Back Box Depth: 25mm. Operating Voltage: 220/250V AC. Maximum Load Rating: LED: 100W (Max. 10 lamps). Application Advice: Not suitable for use with non-dimmable fluorescent bulbs and tubes, wire-wound or toroidal transformers, TRIAC dimmable loads or electric motors. Varilight Guarantee (years): 10. _Varilight are a UK manufacturer with a 10 year warranty on all products. _The entire range fits into UK standard wall boxes. _Complete range of switches and sockets available in each finish.

Read more less

The Varilight Classic raised profile range has an 8mm depth from front to back of plate. Covered by the Varilight 10 year guaranty. Single plate size: 91mm x 91mm. Double plate size: 91mm x 150mm. 13A Plug sockets: Require a 25mm deep wall box. USBÕs are 2.1A. Rocker Light Switches: 2 way (unless stated as intermediate), 10A rated and require a 16mm deep wall box. Halogen & LED Dimmers: 2 Way. Please check product title for dimmer spec and maximum and minimum load. Require a 25mm wall box. 5 Amp Socket: Require a 25mm deep wall box. Shaver Socket: Require a 47mm deep wall box. Dual Voltage Shaver Socket 240V/115V. Suitable for use in bathrooms, toilets and shower rooms (IP41). 240V accepts British and Continental round pin and Australia flat-pin. 115V accepts Continental two-pin and America NEMA. Cooker Switch: Require a 35mm deep wall box. 45 Amp Double pole. Fused Spur: Require a 25mm deep wall box. 13 Amp Double pole. TV Socket: Require a 16mm deep wall box. TV socket for use with male co-axial plugs. Fan Isolator: Require a 16mm deep wall box. 10A Fan Isolating Switch (3 Pole). Triple pole switching. DataGrid Plates: Clip in any combination of DataGrid modules (need to be bought from us separately). Compatible with all standard Euro data modules (Varilight, Triax, RetroTouch etc). Create your own data combinations. Touch/Remote LED Dimmers: V-Pro IR (infra-red) Dimmers. 0-100W (1-10 LEDs). Require a 25mm deep wall box. V-Pro intelligent dimming technology. Touch control or remote control from dedicated handset (not included, Varilight YRC8 can be bought separately), or can use a spare button on an existing handset (e.g. TV remote). 1-way or multi-way when used with V-Pro IR dimming slave unit(s). Soft start feature and intelligent overload protection. Touch Slaves: Can not be used on their own, must be used with a master dimmer to make a 2 way or multi-way circuit. Require a 25mm deep wall box. _V-Pro Multi-Point (formerly Eclique2) Dimmer _4-Gang Tactile Touch Control Dimming Slave for use with Multi-Point (formerly Eclique2) Master on 2-Way Circuits (Twin Plate) _V-Pro intelligent dimming technology _Soft start feature and intelligent overload protection _Use with touch & remote master Multi-Point dimmers in multi-way circuits

Read more less

Standard V-Pro dimmers have a push-on/push-off switch action with rotary dimming. You can change the driving modes and adjust the minimum brightness with pushes of the dimmer control and using signals from the lamps. You can view the programming instructions on the dimmer leaflet or, alternatively, you can view Varilight video on YouTube using this link:- https://www.youtube.com/watch?v=Id1E2hQpX-w . V-Pro series dimmers are designed for use with LEDs and they are also suitable for halogen and incandescent lighting, most dimmable electronic transformers and with no minimum load, are suitable for dimmable low energy lighting. The V-Pro Series, eliminates Dimmer Buzz For GLS Bulbs, GU10 Lamps, and LV Transformers Including Trailing Edge Loads and is equipped with Self Re-setting Overload Protection, so is able to handle overload situations, for example, if the wattage of the bulbs/lamps are accidentally too high on a circuit. This is achieved by the dimmer cutting out before there is any damage, (if the watts are grossly overloaded), until the load is reduced. The dimmer also contains a heat sensor which again stops damage to the dimmer, if it becomes too hot. Please adhere to maximum rating listed on the Varilight datasheets on their website or copy and paste the link for the V-Pro instruction leaflet: - http://www.varilight.co.uk/leaflets/VARILIGHT%20V-Pro%20Dimmer%20Instructions%20776.pdf .These dimmers do not work with lighting panels (LED or CFL) and are not suitable for wire-wound "toroidal" transformers. Please note that only good quality dimmable LEDs should be used. If this dimmer is purchased and the LED lamps are not compatible, the dimmer is not faulty so cannot be returned, but a better quality LED lamp/bulb should be fitted instead. Trailing and Leading Edge Dimmer, please refer to instructions provided with the dimmer, which explains all 3 dimming modes. _Dimmable LED load 10w-120w (per dimmer) _Suitable for 1-10 good quality LED lamps per dimmer module _For Incandescent bulbs, mains, eco and L/V halogen bulbs please click on the link in the product description below. _V-Pro dimmers are suitable for dimmable LEDs, dimmable ESLs, electronic transformers, trailing edge, standard bulbs, GU10 and mains halogen _Fits a 25 mm wall box

Read more less

White Plastic 2-Gang Touch Control Dimming Supplementary Controller for use with Master on 2-Way Circuits _230v _Finish: White Plastic _Dimensions: 30mm x 85mm x 85mm

Read more less

The Varilight Screwless low profile collection offers minimalism with style and a flawless finish. The plate just clips on after installation. Each switch does need to be earthed and is designed to fit into UK standard wall boxes. Covered by the Varilight 10 year guaranty. Single plate size: 86mm x 86mm. Double plate size: 86mm x 147mm. 13A Plug sockets: Require a 35mm deep wall box. USBÕs are 2.1A. Rocker & Toggle Light Switches: 2 way (unless stated as intermediate), 10A rated and require a 25mm deep wall box. Halogen & LED Dimmers: 2 Way. Please check product title for dimmer spec and maximum and minimum load. Require a 35mm wall box. 5 Amp Socket: Require a 35mm deep wall box. Shaver Socket: Require a 47mm deep wall box. Dual Voltage Shaver Socket 240V/115V. Suitable for use in bathrooms, toilets and shower rooms (IP41). Cooker Switch: Require a 35mm deep wall box. 45 Amp Double pole. Fused Spur: Require a 35mm deep wall box. 13 Amp Double pole. TV Socket: Require a 25mm deep wall box. 20 Amp: Require a 25mm deep wall box. Fan Isolator: Require a 35mm deep wall box. 10A Fan Isolating Switch (3 Pole). DataGrid Plates: Clip in any combination of DataGrid modules (need to be bought from us separately). Compatible with all standard Euro data modules (Varilight, Triax, RetroTouch etc). Create your own data combinations. Touch/Remote LED Dimmers: V-Pro IR (infra-red) Dimmers. 0-100W (1-10 LEDs). Require a 35mm deep wall box. V-Pro intelligent dimming technology. Touch control or remote control from dedicated handset (not included, Varilight YRC8 can be bought separately), or can use a spare button on an existing handset (e.g. TV remote). 1-way or multi-way when used with V-Pro IR dimming slave unit(s). Soft start feature and intelligent overload protection. Touch Slaves: Can not be used on their own, must be used with a master dimmer to make a 2 way or multi-way circuit. Require a 35mm deep wall box. _V-Pro IR Dimmer _1-Gang 1-Way Remote/Touch Control Master LED Dimmer 1 x 0-100W (1-10 LEDs) _V-Pro intelligent dimming technology _Touch control or remote control from dedicated handset or spare button on an existing handset (e.g. TV remote) _1-way or multi-way when used with V-Pro IR dimming slave unit(s)

Read more less

The Varilight Screwless low profile collection offers minimalism with style and a flawless finish. The plate just clips on after installation. Each switch does need to be earthed and is designed to fit into UK standard wall boxes. Covered by the Varilight 10 year guaranty. Single plate size: 86mm x 86mm. Double plate size: 86mm x 147mm. 13A Plug sockets: Require a 35mm deep wall box. USBÕs are 2.1A. Rocker & Toggle Light Switches: 2 way (unless stated as intermediate), 10A rated and require a 25mm deep wall box. Halogen & LED Dimmers: 2 Way. Please check product title for dimmer spec and maximum and minimum load. Require a 35mm wall box. 5 Amp Socket: Require a 35mm deep wall box. Shaver Socket: Require a 47mm deep wall box. Dual Voltage Shaver Socket 240V/115V. Suitable for use in bathrooms, toilets and shower rooms (IP41). Cooker Switch: Require a 35mm deep wall box. 45 Amp Double pole. Fused Spur: Require a 35mm deep wall box. 13 Amp Double pole. TV Socket: Require a 25mm deep wall box. 20 Amp: Require a 25mm deep wall box. Fan Isolator: Require a 35mm deep wall box. 10A Fan Isolating Switch (3 Pole). DataGrid Plates: Clip in any combination of DataGrid modules (need to be bought from us separately). Compatible with all standard Euro data modules (Varilight, Triax, RetroTouch etc). Create your own data combinations. Touch/Remote LED Dimmers: V-Pro IR (infra-red) Dimmers. 0-100W (1-10 LEDs). Require a 35mm deep wall box. V-Pro intelligent dimming technology. Touch control or remote control from dedicated handset (not included, Varilight YRC8 can be bought separately), or can use a spare button on an existing handset (e.g. TV remote). 1-way or multi-way when used with V-Pro IR dimming slave unit(s). Soft start feature and intelligent overload protection. Touch Slaves: Can not be used on their own, must be used with a master dimmer to make a 2 way or multi-way circuit. Require a 35mm deep wall box. _V-Pro IR Dimmer _2-Gang Tactile Touch Control Dimming Slave for use with Master on 2-Way Circuits _V-Pro intelligent dimming technology _Use with touch & remote V-Pro IR master dimmers in multi-way circuits _Soft start feature and intelligent overload protection

Read more less

light switch _light switch

Read more less

The Varilight Screwless low profile collection offers minimalism with style and a flawless finish. The plate just clips on after installation. Each switch does need to be earthed and is designed to fit into UK standard wall boxes. Covered by the Varilight 10 year guaranty. Single plate size: 86mm x 86mm. Double plate size: 86mm x 147mm. 13A Plug sockets: Require a 35mm deep wall box. USBÕs are 2.1A. Rocker & Toggle Light Switches: 2 way (unless stated as intermediate), 10A rated and require a 25mm deep wall box. Halogen & LED Dimmers: 2 Way. Please check product title for dimmer spec and maximum and minimum load. Require a 35mm wall box. 5 Amp Socket: Require a 35mm deep wall box. Shaver Socket: Require a 47mm deep wall box. Dual Voltage Shaver Socket 240V/115V. Suitable for use in bathrooms, toilets and shower rooms (IP41). Cooker Switch: Require a 35mm deep wall box. 45 Amp Double pole. Fused Spur: Require a 35mm deep wall box. 13 Amp Double pole. TV Socket: Require a 25mm deep wall box. 20 Amp: Require a 25mm deep wall box. Fan Isolator: Require a 35mm deep wall box. 10A Fan Isolating Switch (3 Pole). DataGrid Plates: Clip in any combination of DataGrid modules (need to be bought from us separately). Compatible with all standard Euro data modules (Varilight, Triax, RetroTouch etc). Create your own data combinations. Touch/Remote LED Dimmers: V-Pro IR (infra-red) Dimmers. 0-100W (1-10 LEDs). Require a 35mm deep wall box. V-Pro intelligent dimming technology. Touch control or remote control from dedicated handset (not included, Varilight YRC8 can be bought separately), or can use a spare button on an existing handset (e.g. TV remote). 1-way or multi-way when used with V-Pro IR dimming slave unit(s). Soft start feature and intelligent overload protection. Touch Slaves: Can not be used on their own, must be used with a master dimmer to make a 2 way or multi-way circuit. Require a 35mm deep wall box. _V-Pro IR Dimmer _2-Gang Tactile Touch Control Dimming Slave for use with Master on 2-Way Circuits _V-Pro intelligent dimming technology _Use with touch & remote V-Pro IR master dimmers in multi-way circuits _Soft start feature and intelligent overload protection

Read more less

The stylish V-Pro IR touch control and touch & remote control dimmers are designed for dimmable LED lighting. Each dimmer (or gang on a multi-gang dimmer) can control between 1 and 10 dimmable LEDs (subject to a maximum load per gang of 100W).  V-Pro IR dimmers can also be used to control incandescent and halogen lighting.  V-Pro IR dimmers are not suitable for wirewound transformers. They are suitable for 1-way circuits only unless they are used in combination with one or more of our tactile touch control dimming slaves which enables you to dim the same lights from two or more switch locations in a 2-way or multi-way circuit. Product codes for V-Pro IR dimmers begin with the letters "IJ" as do the corresponding slaves. Please ensure you choose the correct slave units by checking that the product code begins with the letters "IJ" when using V-Pro IR dimmers in 2-way or multi-way circuits. The touch & remote control dimmers can be controlled via the touch button on the dimmer or using our standard YRC8 infra red remote control handset. If you have a spare button on an infra red remote control at home you can teach the dimmer to respond to that instead. For enhanced lighting control, choose our YRE8 handset which offers features such as LightScene. LightScene offers exciting additional functionality to Varilight V-Pro IR dimmers including scene-setting for multi-gang dimmers. Up to 4 scenes can be stored and recalled at the touch of a button. _SKU: IJDQS001S _1-Gang _Colour: Premium White _Plate Style: Screwless _Back Box Depth: 35mm

Read more less

The stylish V-Pro IR touch control and touch & remote control dimmers are designed for dimmable LED lighting. Each dimmer (or gang on a multi-gang dimmer) can control between 1 and 10 dimmable LEDs (subject to a maximum load per gang of 100W).  V-Pro IR dimmers can also be used to control incandescent and halogen lighting.  V-Pro IR dimmers are not suitable for wirewound transformers. They are suitable for 1-way circuits only unless they are used in combination with one or more of our tactile touch control dimming slaves which enables you to dim the same lights from two or more switch locations in a 2-way or multi-way circuit. Product codes for V-Pro IR dimmers begin with the letters "IJ" as do the corresponding slaves. Please ensure you choose the correct slave units by checking that the product code begins with the letters "IJ" when using V-Pro IR dimmers in 2-way or multi-way circuits. The touch & remote control dimmers can be controlled via the touch button on the dimmer or using our standard YRC8 infra red remote control handset. If you have a spare button on an infra red remote control at home you can teach the dimmer to respond to that instead. For enhanced lighting control, choose our YRE8 handset which offers features such as LightScene.  LightScene offers exciting additional functionality to Varilight V-Pro IR dimmers including scene-setting for multi-gang dimmers. Up to 4 scenes can be stored and recalled at the touch of a button. _SKU: IJDQI102S _2 Gang _Colour: Premium White _Plate Style: Screwless _Back Box Depth: 35mm

Read more less

Varilight is the brand name of Doyle & Tratt Products Ltd the leading British manufacturer of dimmer switches and decorative switches and sockets supplying the UK retail market, the trade and OEMs. The launch of Varilight's international range has enabled the company to establish a presence in other European markets, the Middle East and Africa. The stylish V-Pro IR touch control and touch & remote control dimmers are designed for dimmable LED lighting. Each dimmer (or gang on a multi-gang dimmer) can control between 1 and 10 dimmable LEDs (subject to a maximum load per gang of 100W). V-Pro IR dimmers can also be used to control incandescent and halogen lighting. V-Pro IR dimmers are not suitable for wirewound transformers. They are suitable for 1-way circuits only unless they are used in combination with one or more of our tactile touch control dimming slaves which enables you to dim the same lights from two or more switch locations in a 2-way or multi-way circuit. If you are part of the Trade, feel free to visit our Trade Information Page where you may be eligible for Trade Discount & a Dedicated Sales Manager. Varilight Products are usually shipped within 1-3 days of ordering, for delivery within the UK between 1 and 5 days, depending upon stock availability. For any further enquiries, please call 01342 821433 or email sales@theinternetelectricalstore.com _SKU: IJDNS001S _1-Gang _Colour: Satin Chrome _Plate Style: Screwless _Back Box Depth: 35mm

Read more less

The Varilight Screwless low profile collection offers minimalism with style and a flawless finish. The plate just clips on after installation. Each switch does need to be earthed and is designed to fit into UK standard wall boxes. Covered by the Varilight 10 year guaranty. Single plate size: 86mm x 86mm. Double plate size: 86mm x 147mm. 13A Plug sockets: Require a 35mm deep wall box. USBÕs are 2.1A. Rocker & Toggle Light Switches: 2 way (unless stated as intermediate), 10A rated and require a 25mm deep wall box. Halogen & LED Dimmers: 2 Way. Please check product title for dimmer spec and maximum and minimum load. Require a 35mm wall box. 5 Amp Socket: Require a 35mm deep wall box. Shaver Socket: Require a 47mm deep wall box. Dual Voltage Shaver Socket 240V/115V. Suitable for use in bathrooms, toilets and shower rooms (IP41). Cooker Switch: Require a 35mm deep wall box. 45 Amp Double pole. Fused Spur: Require a 35mm deep wall box. 13 Amp Double pole. TV Socket: Require a 25mm deep wall box. 20 Amp: Require a 25mm deep wall box. Fan Isolator: Require a 35mm deep wall box. 10A Fan Isolating Switch (3 Pole). DataGrid Plates: Clip in any combination of DataGrid modules (need to be bought from us separately). Compatible with all standard Euro data modules (Varilight, Triax, RetroTouch etc). Create your own data combinations. Touch/Remote LED Dimmers: V-Pro IR (infra-red) Dimmers. 0-100W (1-10 LEDs). Require a 35mm deep wall box. V-Pro intelligent dimming technology. Touch control or remote control from dedicated handset (not included, Varilight YRC8 can be bought separately), or can use a spare button on an existing handset (e.g. TV remote). 1-way or multi-way when used with V-Pro IR dimming slave unit(s). Soft start feature and intelligent overload protection. Touch Slaves: Can not be used on their own, must be used with a master dimmer to make a 2 way or multi-way circuit. Require a 35mm deep wall box. _V-Pro IR Dimmer _2-Gang 1-Way Remote/Touch Control Master LED Dimmer 2 x 0-100W (1-10 LEDs) _V-Pro intelligent dimming technology _Touch control or remote control from dedicated handset or spare button on an existing handset (e.g. TV remote) _1-way or multi-way when used with V-Pro IR dimming slave unit(s)

Read more less

The Varilight Screwless low profile collection offers minimalism with style and a flawless finish. The plate just clips on after installation. Each switch does need to be earthed and is designed to fit into UK standard wall boxes. Covered by the Varilight 10 year guaranty. Single plate size: 86mm x 86mm. Double plate size: 86mm x 147mm. 13A Plug sockets: Require a 35mm deep wall box. USBÕs are 2.1A. Rocker & Toggle Light Switches: 2 way (unless stated as intermediate), 10A rated and require a 25mm deep wall box. Halogen & LED Dimmers: 2 Way. Please check product title for dimmer spec and maximum and minimum load. Require a 35mm wall box. 5 Amp Socket: Require a 35mm deep wall box. Shaver Socket: Require a 47mm deep wall box. Dual Voltage Shaver Socket 240V/115V. Suitable for use in bathrooms, toilets and shower rooms (IP41). Cooker Switch: Require a 35mm deep wall box. 45 Amp Double pole. Fused Spur: Require a 35mm deep wall box. 13 Amp Double pole. TV Socket: Require a 25mm deep wall box. 20 Amp: Require a 25mm deep wall box. Fan Isolator: Require a 35mm deep wall box. 10A Fan Isolating Switch (3 Pole). DataGrid Plates: Clip in any combination of DataGrid modules (need to be bought from us separately). Compatible with all standard Euro data modules (Varilight, Triax, RetroTouch etc). Create your own data combinations. Touch/Remote LED Dimmers: V-Pro IR (infra-red) Dimmers. 0-100W (1-10 LEDs). Require a 35mm deep wall box. V-Pro intelligent dimming technology. Touch control or remote control from dedicated handset (not included, Varilight YRC8 can be bought separately), or can use a spare button on an existing handset (e.g. TV remote). 1-way or multi-way when used with V-Pro IR dimming slave unit(s). Soft start feature and intelligent overload protection. Touch Slaves: Can not be used on their own, must be used with a master dimmer to make a 2 way or multi-way circuit. Require a 35mm deep wall box. _V-Pro IR Dimmer _1-Gang 1-Way Remote/Touch Control Master LED Dimmer 1 x 0-100W (1-10 LEDs) _V-Pro intelligent dimming technology _Touch control or remote control from dedicated handset or spare button on an existing handset (e.g. TV remote) _1-way or multi-way when used with V-Pro IR dimming slave unit(s)

Read more less

The Varilight Screwless low profile collection offers minimalism with style and a flawless finish. The plate just clips on after installation. Each switch does need to be earthed and is designed to fit into UK standard wall boxes. Covered by the Varilight 10 year guaranty. Single plate size: 86mm x 86mm. Double plate size: 86mm x 147mm. 13A Plug sockets: Require a 35mm deep wall box. USBÕs are 2.1A. Rocker & Toggle Light Switches: 2 way (unless stated as intermediate), 10A rated and require a 25mm deep wall box. Halogen & LED Dimmers: 2 Way. Please check product title for dimmer spec and maximum and minimum load. Require a 35mm wall box. 5 Amp Socket: Require a 35mm deep wall box. Shaver Socket: Require a 47mm deep wall box. Dual Voltage Shaver Socket 240V/115V. Suitable for use in bathrooms, toilets and shower rooms (IP41). Cooker Switch: Require a 35mm deep wall box. 45 Amp Double pole. Fused Spur: Require a 35mm deep wall box. 13 Amp Double pole. TV Socket: Require a 25mm deep wall box. 20 Amp: Require a 25mm deep wall box. Fan Isolator: Require a 35mm deep wall box. 10A Fan Isolating Switch (3 Pole). DataGrid Plates: Clip in any combination of DataGrid modules (need to be bought from us separately). Compatible with all standard Euro data modules (Varilight, Triax, RetroTouch etc). Create your own data combinations. Touch/Remote LED Dimmers: V-Pro IR (infra-red) Dimmers. 0-100W (1-10 LEDs). Require a 35mm deep wall box. V-Pro intelligent dimming technology. Touch control or remote control from dedicated handset (not included, Varilight YRC8 can be bought separately), or can use a spare button on an existing handset (e.g. TV remote). 1-way or multi-way when used with V-Pro IR dimming slave unit(s). Soft start feature and intelligent overload protection. Touch Slaves: Can not be used on their own, must be used with a master dimmer to make a 2 way or multi-way circuit. Require a 35mm deep wall box. _V-Pro IR Dimmer _2-Gang Tactile Touch Control Dimming Slave for use with Master on 2-Way Circuits _V-Pro intelligent dimming technology _Use with touch & remote V-Pro IR master dimmers in multi-way circuits _Soft start feature and intelligent overload protection

Read more less

The Varilight Screwless low profile collection offers minimalism with style and a flawless finish. The plate just clips on after installation. Each switch does need to be earthed and is designed to fit into UK standard wall boxes. Covered by the Varilight 10 year guaranty. Single plate size: 86mm x 86mm. Double plate size: 86mm x 147mm. 13A Plug sockets: Require a 35mm deep wall box. USBÕs are 2.1A. Rocker & Toggle Light Switches: 2 way (unless stated as intermediate), 10A rated and require a 25mm deep wall box. Halogen & LED Dimmers: 2 Way. Please check product title for dimmer spec and maximum and minimum load. Require a 35mm wall box. 5 Amp Socket: Require a 35mm deep wall box. Shaver Socket: Require a 47mm deep wall box. Dual Voltage Shaver Socket 240V/115V. Suitable for use in bathrooms, toilets and shower rooms (IP41). Cooker Switch: Require a 35mm deep wall box. 45 Amp Double pole. Fused Spur: Require a 35mm deep wall box. 13 Amp Double pole. TV Socket: Require a 25mm deep wall box. 20 Amp: Require a 25mm deep wall box. Fan Isolator: Require a 35mm deep wall box. 10A Fan Isolating Switch (3 Pole). DataGrid Plates: Clip in any combination of DataGrid modules (need to be bought from us separately). Compatible with all standard Euro data modules (Varilight, Triax, RetroTouch etc). Create your own data combinations. Touch/Remote LED Dimmers: V-Pro IR (infra-red) Dimmers. 0-100W (1-10 LEDs). Require a 35mm deep wall box. V-Pro intelligent dimming technology. Touch control or remote control from dedicated handset (not included, Varilight YRC8 can be bought separately), or can use a spare button on an existing handset (e.g. TV remote). 1-way or multi-way when used with V-Pro IR dimming slave unit(s). Soft start feature and intelligent overload protection. Touch Slaves: Can not be used on their own, must be used with a master dimmer to make a 2 way or multi-way circuit. Require a 35mm deep wall box. _V-Pro IR Dimmer _1-Gang Tactile Touch Control Dimming Slave for use with Master on 2-Way Circuits _V-Pro intelligent dimming technology _Use with touch & remote V-Pro IR master dimmers in multi-way circuits _Soft start feature and intelligent overload protection

Read more less

The Varilight Screwless low profile collection offers minimalism with style and a flawless finish. The plastic plate just clips on after installation. Each switch does need to be earthed and is designed to fit into UK standard wall boxes. Covered by the Varilight 10 year guaranty. Single plate size: 86mm x 86mm. Double plate size: 86mm x 147mm. 13A Plug sockets: Require a 35mm deep wall box. USBÕs are 2.1A. Rocker & Toggle Light Switches: 2 way (unless stated as intermediate), 10A rated and require a 25mm deep wall box. Halogen & LED Dimmers: 2 Way. Please check product title for dimmer spec and maximum and minimum load. Require a 35mm wall box. 5 Amp Socket: Require a 35mm deep wall box. Shaver Socket: Require a 47mm deep wall box. Dual Voltage Shaver Socket 240V/115V. Suitable for use in bathrooms, toilets and shower rooms (IP41). Cooker Switch: Require a 35mm deep wall box. 45 Amp Double pole. Fused Spur: Require a 35mm deep wall box. 13 Amp Double pole. TV Socket: Require a 25mm deep wall box. 20 Amp: Require a 25mm deep wall box. Fan Isolator: Require a 35mm deep wall box. 10A Fan Isolating Switch (3 Pole). DataGrid Plates: Clip in any combination of DataGrid modules (need to be bought from us separately). Compatible with all standard Euro data modules (Varilight, Triax, RetroTouch etc). Create your own data combinations. Touch/Remote LED Dimmers: V-Pro IR (infra-red) Dimmers. 0-100W (1-10 LEDs). Require a 35mm deep wall box. V-Pro intelligent dimming technology. Touch control or remote control from dedicated handset (not included, Varilight YRC8 can be bought separately), or can use a spare button on an existing handset (e.g. TV remote). 1-way or multi-way when used with V-Pro IR dimming slave unit(s). Soft start feature and intelligent overload protection. Touch Slaves: Can not be used on their own, must be used with a master dimmer to make a 2 way or multi-way circuit. Require a 35mm deep wall box. _V-Pro IR Dimmer _1-Gang Tactile Touch Control Dimming Slave for use with Master on 2-Way Circuits _V-Pro intelligent dimming technology _Use with touch & remote V-Pro IR master dimmers in multi-way circuits _Soft start feature and intelligent overload protection

Read more less

The Varilight Screwless low profile collection offers minimalism with style and a flawless finish. The plastic plate just clips on after installation. Each switch does need to be earthed and is designed to fit into UK standard wall boxes. Covered by the Varilight 10 year guaranty. Single plate size: 86mm x 86mm. Double plate size: 86mm x 147mm. 13A Plug sockets: Require a 35mm deep wall box. USBÕs are 2.1A. Rocker & Toggle Light Switches: 2 way (unless stated as intermediate), 10A rated and require a 25mm deep wall box. Halogen & LED Dimmers: 2 Way. Please check product title for dimmer spec and maximum and minimum load. Require a 35mm wall box. 5 Amp Socket: Require a 35mm deep wall box. Shaver Socket: Require a 47mm deep wall box. Dual Voltage Shaver Socket 240V/115V. Suitable for use in bathrooms, toilets and shower rooms (IP41). Cooker Switch: Require a 35mm deep wall box. 45 Amp Double pole. Fused Spur: Require a 35mm deep wall box. 13 Amp Double pole. TV Socket: Require a 25mm deep wall box. 20 Amp: Require a 25mm deep wall box. Fan Isolator: Require a 35mm deep wall box. 10A Fan Isolating Switch (3 Pole). DataGrid Plates: Clip in any combination of DataGrid modules (need to be bought from us separately). Compatible with all standard Euro data modules (Varilight, Triax, RetroTouch etc). Create your own data combinations. Touch/Remote LED Dimmers: V-Pro IR (infra-red) Dimmers. 0-100W (1-10 LEDs). Require a 35mm deep wall box. V-Pro intelligent dimming technology. Touch control or remote control from dedicated handset (not included, Varilight YRC8 can be bought separately), or can use a spare button on an existing handset (e.g. TV remote). 1-way or multi-way when used with V-Pro IR dimming slave unit(s). Soft start feature and intelligent overload protection. Touch Slaves: Can not be used on their own, must be used with a master dimmer to make a 2 way or multi-way circuit. Require a 35mm deep wall box. _V-Pro IR Dimmer _1-Gang 1-Way Remote/Touch Control Master LED Dimmer 1 x 0-100W (1-10 LEDs) _V-Pro intelligent dimming technology _Touch control or remote control from dedicated handset or spare button on an existing handset (e.g. TV remote) _1-way or multi-way when used with V-Pro IR dimming slave unit(s)

Read more less