R.S.T. Gauging trowel with a traditional wooden handle and carbon steel blade. Used primarily for mixing and applying small quantities of cement. Size: 180mm (7in).
Universal Tool that can be used for pointing or cementing any small scale brickwork. It has a trowel profile at one end and a squared profile at the other. Made from high carbon steel.Size 12mm x 265mm (1/2 in x 10 1/2 in)
Marshalltown PermaShape® Finishing Gold Stainless Steel Trowel pre-worn finishing trowel with broken-in shape to eliminate line and ripple marks. They withstand the pressure of hard-trowelling and are made from the highest grade stainless steel, properly shaped and tempered to a golden finish. With a resilient DuraSoft® handle which provides a soft feel, reduces fatigue and offers excellent durability.Marshalltown MPB145GSD PermaShape® Finishing Gold Stainless Steel Trowel Size: 350 x 125mm (14 x 5in).
The Marshalltown 19 Series Philadelphia Pattern Brick Trowels are one-piece forged from highest carbon steel then heat-treated for strength and durability. The handle rise is set for correct hang and balance. The blade is taper ground and polished. The DuraSoft® handle incorporating an integral finger guard, provides a soft feel, reduces fatigue and offers excellent durability. Philadelphia Pattern trowels are better suited for laying blocks because they allow for more mortar to be placed on the blade.DuraSoft® handle incorporating an integral finger guard for protection against calluses, heat and cold. Blade Length. 250 X 125mm (10 X 5 in).
The Marshalltown Tuck / Window Pointer is referred to as tuck pointer or joint filler. This trowel is forged in one piece and designed with high shank and lift. This tool is used to form joints between bricks for weatherproofing and to improve appearance. It has a resilient DuraSoft® handle that provides a soft feel, reduces fatigue and offers excellent durability. It is available in a wide variety of widths.Marshalltown M503D Tuck / Window Pointer Size: 6.5 x 165mm (1/4 x 6 3/4in).
MXS Cement trowel designed with the balance, flexibility and toughness required for finishing cement. Fitted with a resilient DuraSoft® handle that provides a soft feel, reduces fatigue, and offers excellent durability. Highest grade spring stainless steel blade, properly shaped and tempered. Lightweight aluminium mounting which is as strong as steel. The blade is made from stainless steel which is easier to clean. These trowels do not corrode and are therefore much longer lasting.Marshalltown MXS73DSS Stainless Steel Cement Trowel. Size: 350 x 120mm (14 x 4 3/4in).
The Marshalltown PermaShape® Finishing Trowel has a pre-worn shape which eliminates line and ripple marks right from the start. High-grade hardened and tempered spring steel blade with bevelled work edges which prevents surface aggregate popping and the correct blade shape, allows novice finishers to be able to produce a professional job. The curved DuraSoft® handle is held firmly by a nut and washer, the blade is made from stainless steel which is easier to clean. These trowels do not corrode and are therefore much longer lasting.Marshalltown MPB13SSD Pre-Worn Plasterer's Trowel. Size: 330 x 125mm (13 x 5in).
44 straight grain wood float is made from 3/4in thick seasoned wood with a smooth finish. Generally used for skimming and to give a sandy surface finish to rendering concrete or plaster. Size: 300 x 125mm (12 X 5 in).
Plasterers leaf and square small pattern trowels are forged from solid steel and are taper ground. Ideal for repairing plaster, filling coving mitres and ornamental plasterwork.Size 16 x 230mm (5/8 x 9 in)
The Vitrex 10 2911 Economy Grout Float offers great value for money. The high impact plastic handle makes this tool durable, whilst the solid foam rubber pad is ideal for fast, smooth grout application. Size: 230 x 100mm.
The Vitrex 10 2950 Wall & Floor Notched Adhesive Trowel with a hard, cold rolled steel blade and a high impact plastic handle, to offer excellent durability. Size: 100 x 230mm (9 x 4in).Notches: Square: 6mm, Round 20mm.
The Vitrex Professional Notched Adhesive Trowels are designed for use by the professional installer and are made to the finest quality. They have stainless steel bases and reinforced, dual riveted, rust resistant blades for longer life. The trowels also have two exposed rivets at the top of the staft which strengthens the hold on the blade, so that the blade will not come away from the shaft when lifting a tile. A soft grip handle provides extra comfort. Size: 115 x 280mm (11 x 4.1/2in).Vitrex Professional Notched Adhesive Trowel. Size: 115 x 280mm (11 x 4.1/2in).Sqaure Notches: 10mm.
The Marshalltown M23RD Curved Inside Corner Trowel has a one-piece, flexible stainless steel blade with rounded corners offering excellent shaping results. Set at an 80° angle, flexing to form a perfect 90° corner during use. Fitted with a durable, lightweight aluminium mounting and DuraSoft® handle providing a comfortable grip and improved tool control. Specification: Size: 125 x 90mm (5 x 3.5in)
The Marshalltown Aluminium Plasterer's Hawk is made from heavy gauge hard-rolled aluminium with smooth straight edges, rounded corners and a 95mm (3.3/4in) flange with extended hub that is threaded for the handle. Fitted with a detachable 125mm (5in) DuraSoft® handle. Also supplied with a sponge rubber callous preventer.1 x Marshalltown M2D Aluminium Plasterers Hawk DuraSoft® Handle 338 x 338mm (13.5 x 13.5in)
The Faithfull Pointing Trowel is a small bladed trowel designed for use in forming brick joints and repairing or replacing weathered joints. These trowels are also a popular choice for shaping and retouching damaged mortar in many situations. The trowels have a high-quality steel blade, with London pattern. The soft grip handles provide excellent comfort.1 x Faithfull Pointing Trowel Soft Grip Handle 150mm (6in)
Faithfull edging trowels are commonly use to apply a rounded finished edge to concrete and render. The carbon steel blade with one long curved edge is fitted with a full sized soft grip handle for user comfort. Size: 280 x 120mm (11 x 4.3/4in).
The Marshalltown Aluminium Plasterer's Hawk is made from heavy gauge hard-rolled aluminium with smooth straight edges, rounded corners and a 95mm (3.3/4in) flange with extended hub that is threaded for the handle. Fitted with a detachable 125mm (5in) DuraSoft® handle. Also supplied with a sponge rubber callous preventer.1 x Marshalltown M1D Aluminium Plasterers Hawk DuraSoft® Handle 325 x 325mm (13 x 13in)
The Faithfull Welded Bucket Trowel has a tapered blade that has been cut square and is designed for removing mortar from the sides and bottom of buckets.The handle is made of a soft grip material which provides a better hold and increased comfort. Size: 180mm (7in).Taper Width: 106mm - 88mm (4.1/4in-3.1/2in).
The Faithfull 5 piece Soft Grip Handle Trowel Set contains all the popular trowels for the DIY or occasional user. Trowels feature high-quality carbon steel blades that have been correctly tempered and hardened, and soft grip handles for user comfort. Set contains the following: 1 x 150mm Pointing Trowel 1 x 175mm Gauging Trowel 1 x 275mm Brick Trowel 1 x 280mm Stainless Steel Plastering Trowel 1 x 12mm by 16mm Brick Jointer
The Faithfull Flooring Trowel has been specially designed for laying flooring. This trowel has a long pointed blade for use on large surface areas. The pointed shape allows access to corners when final finishing a flat surface. High quality stainless steel blade for durability and a long working life. Fitted with a full sized soft-grip handle for user comfort. Size: 400 x 100mm (16 x 4in).
The Faithfull polyurethane backed sponge float for finishing grainy surfaces such as sand and cement mix, or for applying certain plaster finishes. Size: 280 x 115mm (11 x 4.1/2in).
This sturdy float is a lightweight one piece polyurethane moulding. The pattern face is non-absorbent and is used for applying plaster, cement and other building materials.Large Float Size: 350 x 150mm (14 x 6in)
The Faithfull extremely lightweight hawk in moulded polyurethane with a smooth surface finish. A hawk is a useful tray from which to apply plaster or cement quickly to a wall by using a trowel. Size: 13in/330mm Square.
The Faithfull Rubber grouter for applying grout between tiles. This specialist tool features a smooth rubber face cemented to a foam rubber pad with a moulded polyurethane backing for rigidity. Size: 215mm x 110mm (8.1/2in x 4.1/2in).
The Marshalltown Tuck / Window Pointer is referred to as tuck pointer or joint filler. This trowel is forged in one piece and designed with high shank and lift. This tool is used to form joints between bricks for weatherproofing and to improve appearance. It has a resilient DuraSoft® handle that provides a soft feel, reduces fatigue and offers excellent durability. It is available in a wide variety of widths.Marshalltown M507D Tuck / Window Pointer Size: 16 x 170mm (5/8 x 6 3/4in).
Marshalltown Finishing Trowels, whether for concrete or plaster, are crafted from the highest quality materials using the best design standards, blades are cross-ground to hold their shape. Fitted with a resilient DuraSoft® handle that provides a soft feel, reduces fatigue, and offers excellent durability. The aluminium alloy mountings are fully heat treated for strength, they are polished and machine-finished to ensure a perfect handle-to-post-fit. The exclusive Diamond Shank fits exactly into the square hole of the bass wood handle to eliminate turn. Hardened steel rivets properly sized and computer fitted for added strength are used to attach the blade to the mounting. Since Marshalltown Trowels are not welded, there is no embrittlement problem to cause premature breaking. The extra large toe rivet adds additional strength at this point.Marshalltown MXS77D Cement Trowel DuraSoft® Handle Size: 460 x 115mm (18 x 4 1/2in).
The Marshalltown Tuck / Window Pointer is referred to as tuck pointer or joint filler. This trowel is forged in one piece and designed with high shank and lift. This tool is used to form joints between bricks for weatherproofing and to improve appearance. It has a resilient DuraSoft® handle that provides a soft feel, reduces fatigue and offers excellent durability. It is available in a wide variety of widths.Marshalltown M504D Tuck / Window Pointer Size: 8 x 170mm (5/16 x 6 3/4in).
The Marshaltown M23D internal dry wall corner trowel is a lightweight internal corner trowel made from one piece of flexible stainless steel with aluminium mounting. Blade set at 103° angle that flexes to form a perfect 90° corner during use. Fitted with a DuraSoft® handle for user comfort. Specification Size: 100 x 125mm (4 x 5in).Weight: 200g.
The Marshalltown Tile Grouter's Float has a white, non-marking, pure gum rubber face that incorporates bevelled edges, the two front corners are rounded for ease of spreading. Fitted with a moulded plastic handle for added comfort. Designed specifically for grouting.
Designed with the balance, flexibility and toughness required for finishing cement. Highest grade spring stainless steel blade, properly shaped and tempered. Lightweight aluminium mounting which is as strong as steel. A smooth, natural finish, curved California style wooden handle is securely attached. Handle: Curved Wood.Size.: 350 x 120mm (14 x 4.3/4in).
Marshalltown M192 cement edger designed to give a good finish on steps and verges. Stainless steel blade with sturdy mountings. Light and easy to handle with comfortable DuraSoft® handle. Size: 250 x 100mm (10 x 4in).Straight Ends with 10mm (3/8 in) Radius.
The Vitrex Professional Notched Adhesive Trowels are designed for use by the professional installer and are made to the finest quality. They have stainless steel bases and reinforced, dual riveted, rust resistant blades for longer life. The trowels also have two exposed rivets at the top of the staft which strengthens the hold on the blade, so that the blade will not come away from the shaft when lifting a tile. A soft grip handle provides extra comfort. Size: 115 x 280mm (11 x 4.1/2in).Vitrex Professional Notched Adhesive Trowel. Size: 115 x 280mm (11 x 4.1/2in).Square Notches: 8mm.
Marshalltown 19 Series Leather handled Philadelphia pattern brick trowel with the blade being manufactured from a single piece of high grade steel, tempered and taper ground with a straight post and carefully set handle angle. The handle is securely attached with a polished steel ferrule, straight shouldered Philadelphia pattern blade. These trowels have been re-engineered and are produced on the most modern forging equipment available. The impact area is strong to provide extra endurance, the flexibility produces the unique feel of Marshalltown brick trowels, straight shouldered Philadelphia pattern bladeLeather handle. Size. 300 x 150mm (12 x 6 in)
The Faithfull Prestige Midget Plastering Trowel has been designed for the smooth and easy application of plaster from the first use. The 301 high-grade stainless steel blade features pre-worn edges to replicate the shape of a well-used trowel. The curved shape is ideal to prevent the blades lead edge digging in. A durable and lightweight aluminium shank is riveted to the blade for strength and durability. The ergonomically shaped ‘camel back’ handle has a soft grip for comfort during prolonged use. The arched shape also allows for extra knuckle clearance. The Prestige range is manufactured to the highest standards and is also covered by a 10 year guarantee. Specification: Blade Size: 200 x 75mm (8 x 3in)