The Kuny's PL-99 Multi Pocket Tool + Phone Holder has a durable polyester construction. Attach to belt with snap closure or carry securely in pocket with padded flap. It has 4 pockets and one padded pocket with elastic binding. Designed to fit most compact mobile phones. With a webbing slot for small flashlight or other tools. Fitted with a detachable electrical tape sling.
The Faithfull Swivel Hammer Holder has a base made from quality hide leather, to last and provide dependable service. The steel swivel ring accommodates most hammers and adjusts to suit the body angle. Fits most belts. Size: 150 x 100mm (6 x 4in).
This Faithfull End Cutter Pliers Holder is made from high-quality hide leather to last and provide dependable service. Its steel fitment is designed to hold end cutting pliers and similar cutters. Fits most belts. Overall Size: 150mm x 100mm (6 x 4in).
The Faithfull Bit Roll is made from a hardwearing nylon backed polyester material which is double stitched at stress points and edged for extra strength. Contains pockets for various sizes of drill bits and a zip-up compartment for storing small tools or paperwork. Three elastic loops are provided for secure pen or pencil storage. NOTE: Tools NOT included.1 x Faithfull 13 Pocket Bit Roll 27 x 55cm
The Kuny's EL1509 Professional Electricians Zip Pouch is made from a double layer of rugged lightweight 600D polyester fabric. Zippered top flap prevents loss of tools when carrying (or not in use). With ergonomic rubber handle and padded shoulder strap design and zippered 8 in x 5 in padded back pocket for documents or drawings/writing pads. Outside pocket for mobile phone with 3 outside large screwdriver holders.
The Bahco 4750-3PB-1 Three Pouch Belt Set is made from tough, lightweight nylon and features plenty of riveting for real strength. The pouches are made from polyester. With rust proof fittings, including a tape clip. It also has 4 hooks for extra loops and 3 safety rings for lanyard attachment. Fits waist sizes up to 48 inch.
The Kuny's AP-527X Heavy-Duty Leather Work Apron is made from heavy-duty suede leather. It has 12 pockets, including: four main nail and tool pockets, six smaller pockets (for pliers, nail sets, pencils, etc.), a centre pocket for tape measure, nails or other tools and a leather combination square holder. In addition, the apron features a hammer hook. Has double gussets which help to keep front pockets wide open for easy access. Its 52mm (2in) wide polyweb belt has a roller buckle. Fits waist sizes: 29 to 46in.
The Kuny's 51mm (2in) wide, 32 strand Poly Web Belt. Made from heavy-duty Poly Web material. Top quality, quick release buckle. Fits waist sizes: 29in to 46in.
The Kuny's HM219 Leather Swing Hammer Holder is made from top grain leather and heavy-duty steel. The cradle design keeps the hammer secure whilst the swing feature keeps hammer vertical. Fits belt sizes up to 70mm (2.3/4in) wide.
The Kuny's 76.2mm (3in) wide padded comfort belt, made from heavy-duty, double layer, lightweight fabric for excellent durability. For comfort, it has foam padding. The belt has a 51mm (2in) double tongue metal roller buckle and a grip strip fastening system that holds pouches securely in place. It will not rot, crack, harden or be affected by mildew. Fits waist sizes: 29in to 46in.
The Faithfull 15 Pocket Tool Roll is made from a hardwearing nylon backed polyester material which is double stitched at stress points and edged for extra strength. Contains pockets for various sizes of tools and a zip-up compartment for storing small tools or paperwork. Three elastic loops are provided for secure pen or pencil storage. Dimensions: 32 x 77cm NOTE: Tools NOT included.
Made from heavy-duty leather this tool pouch is double stitched for strength and riveted at stress points.Webbing belt is attached and will fit waists from 29in to 46in.Has 10 pockets for tools and nails, tape clip and two hammer loops. Size: 215 mm x 500 mm (8.1/2in x 20in)
The Stanley Tools Hammer Holder has a metal hammer loop that is comfortable to reach. Made from professional, high-grade leather (suede) with rivet reinforced stress points and a wide belt slot.
The Kuny's HM213 Leather Heavy-Duty Hammer Holder is made from Top Grain leather. The cradle design eliminates hammer pivoting. Fits belt sizes up to 70mm (2.3/4in) wide.
The Faithfull Chisel Roll is made from a hardwearing nylon backed polyester material which is double stitched at stress points and edged for extra strength. Contains pockets for various sized chisels and small tools and a zip-up compartment for storing small tools or paperwork. Three elastic loops are provided for secure pen or pencil storage. New improved design features wider pockets to fit chisels with or without blade guards. The chisel size is printed on the pocket for easy product selection. NOTE: Tools NOT included.1 x Faithfull 8 Pocket Chisel Roll 33 x 40cm
The Bahco 4750-HHO-2 Hammer Holder is made from durable 1680 denier polyester and will hold any claw hammer at a comfortable angle. It also features a lanyard attachment for safer at height working and an integrated belt loop. The holder is rustproof for a long working life.
The Kuny's AP661 Split Grain Water Repellent Tool Belt is made from heavy water repellent split grain leather. Five reversed nail pockets for easy access (two large and three small). Deep centre pockets for tapes or other tools. Two heavy steel hammer holders with six smaller pockets for pencils, utility knife, markers etc. Heavy-duty belt with roller buckle and double riveted at all stress points.
Kuny's Journeyman Carpenter's Apron made of full grain leather, with reinforced stress points. Heavy leather belt with roller buckle.5 Reversed nail pockets for easy access (2 large and 3 small).- Deep centre pocket for tape etc. - 2 Heavy steel hammer holders.- Extra pockets for pencils, markers etc.
This Kuny's Construction Apron is made from oiled top grain leather. It has 4 main reversed nail and tool pockets and 6 smaller pockets to fit pliers, nail sets, pencils, etc. In addition, it has a centre pocket which is ideal for tape, nails or other tools and a moulded leather holder which fits a combination square, and a metal snap-in hammer loop. The apron has a 2 inch wide heavy-duty leather belt with a double tongue roller buckle. Fits waists sizes: 29 to 46in.
The Kuny's PL-767 Plier / Tool Holder is made from a double layer of rugged lightweight fabric. Fits narrow type hand tools up to 250mm (10in) long and has a carabiner loop holder. Fits belt sizes up to 70mm (2.3/4in) wide.
The Kuny's PL21 Utility Knife & Plier Holder is made from heavy top grain leather. With an all rivet construction. Slots to fit 51mm (2in) wide belt. Fits most standard utility style trim knives and pliers. Dimensions: 216 x 64mm (8.1/2 x 2.1/2in).
The Faithfull Scaffold Level Holder, made to a high specification using quality heavy-duty split suede. Made to last and provide dependable service. Single pocket for small spirit level. Looped for attachment to a separate belt. Size: 270 x 90mm (10.1/2 x 3.1/2in).
The Kuny's SW-1105 5 Pocket Phone & Tool Holder is made from polyester fabric and ballistic nylon. The mobile phone, tool and accessory holder you can HANG or STRAP or CLIP on work belts, web braces, trousers etc. Securely holds small tools and accessories like pliers, mini-flashlights etc. Versatile 3-way attachment feature.
The Faithfull Single Tool & Nail Pouch, made from heavy-duty leather, double stitched and with rivet reinforcement at stress points. Has a belt loop for belts up to 2in wide. Has two large pockets for nails, three pockets for small tools and a hammer loop. Size: 250 x 280mm (10 x 11in).
The Bahco 4750-EP-1 Electrician's Pouch offers generous storage in each pouch to allow storage of large electrician's tools. Made from ballistic nylon for industrial and professional use with strong industrial stitching with rust-proof fittings for outstanding durability. The pouch has been riveted for extra strength. Features holders for fixings, nails, screwdrivers etc. Eight screwdriver slots, 4 in the pouch and 4 on the front. The steel chain has been designed for multiple insulation tape rolls.
The Stanley Tools Leather Nail & Hammer Pouch has multiple, easy access pockets and holders for quick access on the job. Fitted with a metal hammer loop that is a comfortable reach. Made from professional, high grade leather (suede) with rivet reinforced stress points and a wide belt slot.
The Faithfull Double Scaffold Spanner Holder, made to a high specification using quality heavy-duty hide. Made to last and provide dependable service. Two loops for scaffold spanners or socket bars. Fits most belts. Size: 150 x 100mm (6 x 4in).
The Kuny's drywall Pouch with no hammer holder loop. Ideal for use when fitting plasterboard as there are no hard surfaces to cause damage. Made from durable split grain leather. Three pouches. (Large, Medium and Small) reversed for easy access. Rivet reinforced at all stress points. Fits any belt up to 76.2mm (3in) wide.
The Kuny's Journeyman Half Apron is made from all weather logger tan leather and features a back wall pocket and side tool holder. Comprises extra large main pouch with large reversed front pouch, easy accessible top pouch together with three small utility pockets, three back wall pockets and additional side tool slots for other tools. Fits belt sizes up to 88.9mm (3.1/2in) wide.
